From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] imx_spi: drop non usefull ifdef
Date: Fri, 12 Aug 2011 08:42:49 +0200 [thread overview]
Message-ID: <20110812064249.GI31404@pengutronix.de> (raw)
In-Reply-To: <1313078124-32663-1-git-send-email-plagnioj@jcrosoft.com>
On Thu, Aug 11, 2011 at 05:55:24PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> drop CONFIG_DRIVER_SPI_IMX_<version>
>
> this will not reduce barebox size as the compiler will do for us
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> drivers/spi/Kconfig | 12 +--------
> drivers/spi/imx_spi.c | 63 +++++++++---------------------------------------
> 2 files changed, 13 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 9ab03f6..b48f9aa 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -6,17 +6,7 @@ config SPI
>
> config DRIVER_SPI_IMX
> bool "i.MX SPI Master driver"
> - depends on ARCH_IMX
> + depends on ARCH_IMX && (ARCH_IMX27 || ARCH_IMX51 || ARCH_IMX53)
> depends on SPI
>
> -config DRIVER_SPI_IMX_0_0
> - bool
> - depends on ARCH_IMX27
> - default y
> -
> -config DRIVER_SPI_IMX_2_3
> - bool
> - depends on ARCH_IMX51 || ARCH_IMX53
> - default y
> -
> endmenu
> diff --git a/drivers/spi/imx_spi.c b/drivers/spi/imx_spi.c
> index 6dc41b9..0e2ea7e 100644
> --- a/drivers/spi/imx_spi.c
> +++ b/drivers/spi/imx_spi.c
> @@ -90,24 +90,12 @@
> #define CSPI_2_3_STAT_RR (1 << 3)
>
> enum imx_spi_devtype {
> -#ifdef CONFIG_DRIVER_SPI_IMX1
> SPI_IMX_VER_IMX1,
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_0
> SPI_IMX_VER_0_0,
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_4
> SPI_IMX_VER_0_4,
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_5
> SPI_IMX_VER_0_5,
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_7
> SPI_IMX_VER_0_7,
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_2_3
> SPI_IMX_VER_2_3,
> -#endif
> };
We can get rid of this enumaration...
>
> struct imx_spi {
> @@ -120,12 +108,6 @@ struct imx_spi {
> void (*init)(struct imx_spi *imx);
> };
>
> -struct spi_imx_devtype_data {
> - unsigned int (*xchg_single)(struct imx_spi *imx, u32 data);
> - void (*chipselect)(struct spi_device *spi, int active);
> - void (*init)(struct imx_spi *imx);
> -};
but please keep this struct.
> -
> static int imx_spi_setup(struct spi_device *spi)
> {
> debug("%s mode 0x%08x bits_per_word: %d speed: %d\n",
> @@ -134,7 +116,6 @@ static int imx_spi_setup(struct spi_device *spi)
> return 0;
> }
>
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_0
> static unsigned int cspi_0_0_xchg_single(struct imx_spi *imx, unsigned int data)
> {
> void __iomem *base = imx->regs;
> @@ -204,9 +185,7 @@ static void cspi_0_0_init(struct imx_spi *imx)
> readl(base + CSPI_0_0_RXDATA);
> writel(0, base + CSPI_0_0_INT);
> }
> -#endif
>
> -#ifdef CONFIG_DRIVER_SPI_IMX_2_3
> static unsigned int cspi_2_3_xchg_single(struct imx_spi *imx, unsigned int data)
> {
> void __iomem *base = imx->regs;
> @@ -308,7 +287,6 @@ static void cspi_2_3_chipselect(struct spi_device *spi, int is_active)
> static void cspi_2_3_init(struct imx_spi *imx)
> {
> }
> -#endif
>
> static int imx_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
> {
> @@ -334,29 +312,11 @@ static int imx_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
> return 0;
> }
>
> -static struct spi_imx_devtype_data spi_imx_devtype_data[] = {
> -#ifdef CONFIG_DRIVER_SPI_IMX_0_0
> - [SPI_IMX_VER_0_0] = {
> - .chipselect = cspi_0_0_chipselect,
> - .xchg_single = cspi_0_0_xchg_single,
> - .init = cspi_0_0_init,
> - },
> -#endif
> -#ifdef CONFIG_DRIVER_SPI_IMX_2_3
> - [SPI_IMX_VER_2_3] = {
> - .chipselect = cspi_2_3_chipselect,
> - .xchg_single = cspi_2_3_xchg_single,
> - .init = cspi_2_3_init,
> - },
> -#endif
> -};
This can be turned from an array to imx*_spi_devtype_data,
> - imx->chipselect = spi_imx_devtype_data[version].chipselect;
> - imx->xchg_single = spi_imx_devtype_data[version].xchg_single;
> - imx->init = spi_imx_devtype_data[version].init;
> + if (cpu_is_mx27()) {
> + imx->chipselect = cspi_0_0_chipselect;
> + imx->xchg_single = cspi_0_0_xchg_single;
> + imx->init = cspi_0_0_init;
> + }
> +
> + if (cpu_is_mx51() || cpu_is_mx53()) {
> + imx->chipselect = cspi_2_3_chipselect;
> + imx->xchg_single = cspi_2_3_xchg_single;
> + imx->init = cspi_2_3_init;
> + }
Please keep structs to the SoC specific data. We might want to add
device tree support in the future, then we'll need pointers to
SoC specific data.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-08-12 6:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-11 15:30 [PATCH] imx_spi: drop non usefull ifdef enum imx_spi_devtype and arround cpu_is_xx Jean-Christophe PLAGNIOL-VILLARD
2011-08-11 15:55 ` [PATCH v2] imx_spi: drop non usefull ifdef Jean-Christophe PLAGNIOL-VILLARD
2011-08-12 6:42 ` Sascha Hauer [this message]
2011-08-12 9:36 ` Jean-Christophe PLAGNIOL-VILLARD
2011-08-12 12:10 ` Sascha Hauer
2011-08-12 12:49 ` Jean-Christophe PLAGNIOL-VILLARD
2011-08-12 17:23 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110812064249.GI31404@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox