mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <shc@milas.spb.ru>
Cc: barebox@lists.infradead.org
Subject: Re: Add SD3 & I2C2 pin definitions for MX51
Date: Mon, 19 Sep 2011 12:05:49 +0200	[thread overview]
Message-ID: <20110919100549.GM31404@pengutronix.de> (raw)
In-Reply-To: <1315378747.14373@milas.spb.ru>

On Wed, Sep 07, 2011 at 10:59:07AM +0400, Alexander Shiyan wrote:
> --- barebox-v2011.09.0.orig/arch/arm/mach-imx/include/mach/iomux-mx51.h	2011-08-26 18:23:46.000000000 +0400
> +++ barebox-v2011.09.0/arch/arm/mach-imx/include/mach/iomux-mx51.h	2011-09-05 15:42:19.000000000 +0400
> @@ -146,24 +146,37 @@
> 
>  #define MX51_PAD_NANDF_CS7__NANDF_CS7			IOMUX_PAD(0x534, 0x14C, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_NANDF_CS7__FEC_TX_EN			IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_FEC_PAD_CTRL)
> +#define MX51_PAD_NANDF_CS7__SD3_CLK			IOMUX_PAD(0x534, 0x14C, 5, 0x0, 0, MX51_FEC_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		IOMUX_PAD(0x538, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_FEC_PAD_CTRL)
> +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			IOMUX_PAD(0x538, 0x150, 5 | IOMUX_CONFIG_SION, 0, 0, MX51_FEC_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D15__NANDF_D15			IOMUX_PAD(0x53C, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D15__SD3_DATA7			IOMUX_PAD(0x53C, 0x154, 5, 0x0, 0, NO_PAD_CTRL)
> +
>  #define MX51_PAD_NANDF_D14__NANDF_D14			IOMUX_PAD(0x540, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D14__SD3_DATA6			IOMUX_PAD(0x540, 0x158, 5, 0x0, 0, NO_PAD_CTRL)
> +
>  #define MX51_PAD_NANDF_D13__NANDF_D13			IOMUX_PAD(0x544, 0x15C, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D13__SD3_DATA5			IOMUX_PAD(0x544, 0x15C, 5, 0x0, 0, NO_PAD_CTRL)
> +
>  #define MX51_PAD_NANDF_D12__NANDF_D12			IOMUX_PAD(0x548, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D12__SD3_DATA4			IOMUX_PAD(0x548, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D11__NANDF_D11			IOMUX_PAD(0x54C, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_NANDF_D11__FEC_RX_DV			IOMUX_PAD(0x54C, 0x164, 2, 0x96c, 0, MX51_FEC_PAD_CTRL)
> +#define MX51_PAD_NANDF_D11__SD3_DATA3			IOMUX_PAD(0x54C, 0x164, 5, 0x948, 1, MX51_FEC_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D10__NANDF_D10			IOMUX_PAD(0x550, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D10__SD3_DATA2			IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D9__NANDF_D9			IOMUX_PAD(0x554, 0x16C, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_NANDF_D9__SD3_DATA1			IOMUX_PAD(0x554, 0x16C, 5, 0x940, 1, NO_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D8__NANDF_D8			IOMUX_PAD(0x558, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_NANDF_D8__FEC_TDATA0			IOMUX_PAD(0x558, 0x170, 2, 0x0, 0, MX51_FEC_PAD_CTRL)
> +#define MX51_PAD_NANDF_D8__SD3_DATA0			IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, MX51_FEC_PAD_CTRL)
> 
>  #define MX51_PAD_NANDF_D7__NANDF_D7			IOMUX_PAD(0x55C, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_NANDF_D6__NANDF_D6			IOMUX_PAD(0x560, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
> @@ -337,8 +350,13 @@
>  #define MX51_PAD_SD2_DATA1__SD2_DATA1			IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_SD2_DATA2__SD2_DATA2			IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_SD2_DATA3__SD2_DATA3			IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
> +
>  #define MX51_PAD_GPIO1_2__GPIO1_2			IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_GPIO1_2__I2C2_SCL			IOMUX_PAD(0x7D4, 0x3CC, 2 | IOMUX_CONFIG_SION, 0x9b8, 3, NO_PAD_CTRL)
> +

I think the i2c pads need a pullup, right?

Sascha

>  #define MX51_PAD_GPIO1_3__GPIO1_3			IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_GPIO1_3__I2C2_SDA			IOMUX_PAD(0x7D8, 0x3D0, 2 | IOMUX_CONFIG_SION, 0x9bc, 3, NO_PAD_CTRL)
> +
>  #define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_GPIO1_4__GPIO1_4			IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
>  #define MX51_PAD_GPIO1_5__GPIO1_5			IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)

> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-09-19 10:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-07  6:59 Alexander Shiyan
2011-09-19 10:05 ` Sascha Hauer [this message]
2011-09-20 10:10   ` Alexander Shiyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110919100549.GM31404@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=shc@milas.spb.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox