From: Sascha Hauer <s.hauer@pengutronix.de>
To: Fabian van der Werf <fvanderwerf@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] usb: fix unaligned access
Date: Sat, 22 Oct 2011 22:20:35 +0200 [thread overview]
Message-ID: <20111022202035.GK23421@pengutronix.de> (raw)
In-Reply-To: <1319289593-15251-1-git-send-email-fvanderwerf@gmail.com>
On Sat, Oct 22, 2011 at 03:19:53PM +0200, Fabian van der Werf wrote:
> ---
> drivers/usb/core/usb.c | 12 +++++++-----
> drivers/usb/host/ehci-hcd.c | 9 +++++++--
> 2 files changed, 14 insertions(+), 7 deletions(-)
Looks like a valid patch, I wonder that this never was a problem before.
ARM should break here aswell I think. What architecture are you using?
Sascha
>
> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
> index 7039a2c..369a393 100644
> --- a/drivers/usb/core/usb.c
> +++ b/drivers/usb/core/usb.c
> @@ -50,6 +50,7 @@
> #include <driver.h>
> #include <linux/ctype.h>
> #include <asm/byteorder.h>
> +#include <asm/unaligned.h>
> #include <xfuncs.h>
> #include <init.h>
>
> @@ -1071,6 +1072,7 @@ static int usb_hub_configure(struct usb_device *dev)
> struct usb_hub_status *hubsts;
> int i;
> struct usb_hub_device *hub;
> + unsigned short hub_chars;
>
> hub = xzalloc(sizeof (*hub));
> dev->hub = hub;
> @@ -1100,8 +1102,8 @@ static int usb_hub_configure(struct usb_device *dev)
> }
> memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
> /* adjust 16bit values */
> - hub->desc.wHubCharacteristics =
> - le16_to_cpu(descriptor->wHubCharacteristics);
> + hub_chars = le16_to_cpu(get_unaligned(&descriptor->wHubCharacteristics));
> + put_unaligned(hub_chars, &hub->desc.wHubCharacteristics);
> /* set the bitmap */
> bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
> /* devices not removable by default */
> @@ -1118,7 +1120,7 @@ static int usb_hub_configure(struct usb_device *dev)
> dev->maxchild = descriptor->bNbrPorts;
> USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
>
> - switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
> + switch (hub_chars & HUB_CHAR_LPSM) {
> case 0x00:
> USB_HUB_PRINTF("ganged power switching\n");
> break;
> @@ -1131,12 +1133,12 @@ static int usb_hub_configure(struct usb_device *dev)
> break;
> }
>
> - if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
> + if (hub_chars & HUB_CHAR_COMPOUND)
> USB_HUB_PRINTF("part of a compound device\n");
> else
> USB_HUB_PRINTF("standalone hub\n");
>
> - switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
> + switch (hub_chars & HUB_CHAR_OCPM) {
> case 0x00:
> USB_HUB_PRINTF("global over-current protection\n");
> break;
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index 72f1c14..20c518a 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -33,6 +33,7 @@
> #include <errno.h>
> #include <usb/ehci.h>
> #include <asm/mmu.h>
> +#include <asm/unaligned.h>
>
> #include "ehci.h"
>
> @@ -795,6 +796,7 @@ static int ehci_init(struct usb_host *host)
> struct ehci_priv *ehci = to_ehci(host);
> uint32_t reg;
> uint32_t cmd;
> + unsigned short hub_chars;
>
> ehci_halt(ehci);
>
> @@ -819,12 +821,15 @@ static int ehci_init(struct usb_host *host)
> reg = ehci_readl(&ehci->hccr->cr_hcsparams);
> descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
>
> + hub_chars = get_unaligned(&descriptor.hub.wHubCharacteristics);
> /* Port Indicators */
> if (HCS_INDICATOR(reg))
> - descriptor.hub.wHubCharacteristics |= 0x80;
> + hub_chars |= 0x80;
> /* Port Power Control */
> if (HCS_PPC(reg))
> - descriptor.hub.wHubCharacteristics |= 0x01;
> + hub_chars |= 0x01;
> +
> + put_unaligned(hub_chars, &descriptor.hub.wHubCharacteristics);
>
> /* Start the host controller. */
> cmd = ehci_readl(&ehci->hcor->or_usbcmd);
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2011-10-22 20:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-22 13:19 Fabian van der Werf
2011-10-22 20:20 ` Sascha Hauer [this message]
2011-10-23 9:29 ` Fabian van der Werf
2011-10-24 15:14 ` Antony Pavlov
2011-10-24 17:07 ` Sascha Hauer
2011-10-24 18:37 ` Fabian van der Werf
2011-10-24 19:02 ` Eric Bénard
2011-10-24 19:30 ` Sascha Hauer
2011-10-24 19:42 ` Eric Bénard
2011-10-25 18:36 ` Fabian van der Werf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111022202035.GK23421@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=fvanderwerf@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox