From: Sascha Hauer <s.hauer@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC] ns16550: support for UART with broken FIFO
Date: Tue, 17 Jan 2012 14:09:17 +0100 [thread overview]
Message-ID: <20120117130917.GZ5446@pengutronix.de> (raw)
In-Reply-To: <1326796746-8652-1-git-send-email-antonynpavlov@gmail.com>
On Tue, Jan 17, 2012 at 02:39:06PM +0400, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> drivers/serial/serial_ns16550.c | 19 +++++++++++++++++--
> include/ns16550.h | 2 ++
> 2 files changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index 1217a5f..01de964 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -139,6 +139,8 @@ static unsigned int ns16550_calc_divisor(struct console_device *cdev,
> static void ns16550_serial_init_port(struct console_device *cdev)
> {
> unsigned int baud_divisor;
> + struct NS16550_plat *plat = (struct NS16550_plat *)
> + cdev->dev->platform_data;
>
> /* Setup the serial port with the defaults first */
> baud_divisor = ns16550_calc_divisor(cdev, CONFIG_BAUDRATE);
> @@ -153,7 +155,13 @@ static void ns16550_serial_init_port(struct console_device *cdev)
> ns16550_write(cdev, (baud_divisor >> 8) & 0xff, dlm);
> ns16550_write(cdev, LCRVAL, lcr);
> ns16550_write(cdev, MCRVAL, mcr);
> - ns16550_write(cdev, FCRVAL, fcr);
> +
> + if (plat->flags & NS16650_FLAG_DISABLE_FIFO) {
> + ns16550_write(cdev, FCRVAL & ~FCR_FIFO_EN, fcr);
> + } else {
> + ns16550_write(cdev, FCRVAL, fcr);
> + }
unnecessary braces here..
> +
> #ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS
> ns16550_write(cdev, 0x00, mdr1);
> #endif
> @@ -211,6 +219,8 @@ static int ns16550_tstc(struct console_device *cdev)
> static int ns16550_setbaudrate(struct console_device *cdev, int baud_rate)
> {
> unsigned int baud_divisor = ns16550_calc_divisor(cdev, baud_rate);
> + struct NS16550_plat *plat = (struct NS16550_plat *)
> + cdev->dev->platform_data;
>
> ns16550_write(cdev, 0x00, ier);
> ns16550_write(cdev, LCR_BKSE, lcr);
> @@ -218,7 +228,12 @@ static int ns16550_setbaudrate(struct console_device *cdev, int baud_rate)
> ns16550_write(cdev, (baud_divisor >> 8) & 0xff, dlm);
> ns16550_write(cdev, LCRVAL, lcr);
> ns16550_write(cdev, MCRVAL, mcr);
> - ns16550_write(cdev, FCRVAL, fcr);
> + if (plat->flags & NS16650_FLAG_DISABLE_FIFO) {
> + ns16550_write(cdev, FCRVAL & ~FCR_FIFO_EN, fcr);
> + } else {
> + ns16550_write(cdev, FCRVAL, fcr);
> + }
and here. Otherwise this looks ok.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-01-17 13:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-17 10:39 Antony Pavlov
2012-01-17 13:09 ` Sascha Hauer [this message]
2012-01-17 13:27 ` Antony Pavlov
2012-01-17 14:53 ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-17 19:40 ` Antony Pavlov
2012-01-17 23:58 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120117130917.GZ5446@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox