From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Rut4L-0001jz-2s for barebox@lists.infradead.org; Tue, 07 Feb 2012 21:59:22 +0000 Date: Tue, 7 Feb 2012 22:59:06 +0100 From: Sascha Hauer Message-ID: <20120207215906.GE3852@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: "make distclean" doesn't remove generated MLO file To: "Robert P. J. Day" Cc: "U-Boot Version 2 (barebox)" On Tue, Feb 07, 2012 at 12:02:56PM -0500, Robert P. J. Day wrote: > On Tue, 7 Feb 2012, Premi, Sanjeev wrote: > > > I usually compile both stages together with a 'make clean' in > > between, hence decided to preserve MLO. Makes it easy to copy both > > MLO and barebox.bin at same time. > > is there any sort of requirement about cleaning in between those two > steps? if there is, that's a potential "gotcha" that should be > clearly documented. I'm not aware of any issues here. I only do a make clean when changing the architecture. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox