mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: George Stefan <stefan.george87@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: mx53 loco boot procedure
Date: Tue, 21 Feb 2012 21:02:05 +0100	[thread overview]
Message-ID: <20120221210205.0733d834@eb-e6520> (raw)
In-Reply-To: <CAACwSTKshGv05PfJWJkFTKzhof2q+hjupdh=U3VH2Fbdc-6VBQ@mail.gmail.com>

Hi George,

Le Tue, 21 Feb 2012 20:38:24 +0200,
George Stefan <stefan.george87@gmail.com> a écrit :

> Hello guys,
> After  dd if=barebox.bin of=/dev/sdb bs=512 and dd if=arch/arm/boot/uImage
> of=/dev/sdb bs=512 seek=768 i am getting
> 
> Board: Freescale i.MX53 LOCO registered netconsole as cs1 eth@eth0: got MAC
> address from EEPROM: 00:04:9F:01:B4:5B mci@mci0: No partition table found
> Cannot reset the SD/MMC interface Malloc space: 0x7df00000 -> 0x7fefffff
> (size 32 MB) Stack space : 0x7def8000 -> 0x7df00000 (size 32 kB) envfs:
> wrong magic on /dev/env0 no valid environment found on /dev/env0. Using
> default environment running /env/bin/init... Hit any key to stop autoboot:
> 1 phy0: Link is up - 100/Full T DHCP client bound to address
> 128.224.168.167 TFTP from server 128.224.168.11 ('zImage-loco' -> '/image')
> 
> Wasn't the board suppose to boot from sd card by default?
> 
it will if you configure it correctly (ie: check env/config and put
the right settings inside to tell it to get the kernel from disk
instead of tftp).

Eric
-- 
http://eukrea.com/en/news/104-2012

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-02-21 20:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-21 18:38 George Stefan
2012-02-21 20:02 ` Eric Bénard [this message]
2012-02-21 21:01 ` Sascha Hauer
2012-02-22  9:22   ` George Stefan
2012-02-23 20:13     ` Sascha Hauer
2012-02-23 20:40       ` George Stefan
2012-02-23 20:59         ` Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120221210205.0733d834@eb-e6520 \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    --cc=stefan.george87@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox