From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp3-g21.free.fr ([2a01:e0c:1:1599::12]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1Rzvuf-0002IQ-H4 for barebox@lists.infradead.org; Tue, 21 Feb 2012 20:02:18 +0000 Date: Tue, 21 Feb 2012 21:02:05 +0100 From: Eric =?ISO-8859-1?B?QuluYXJk?= Message-ID: <20120221210205.0733d834@eb-e6520> In-Reply-To: References: Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: mx53 loco boot procedure To: George Stefan Cc: barebox@lists.infradead.org Hi George, Le Tue, 21 Feb 2012 20:38:24 +0200, George Stefan a =E9crit : > Hello guys, > After dd if=3Dbarebox.bin of=3D/dev/sdb bs=3D512 and dd if=3Darch/arm/bo= ot/uImage > of=3D/dev/sdb bs=3D512 seek=3D768 i am getting > = > Board: Freescale i.MX53 LOCO registered netconsole as cs1 eth@eth0: got M= AC > address from EEPROM: 00:04:9F:01:B4:5B mci@mci0: No partition table found > Cannot reset the SD/MMC interface Malloc space: 0x7df00000 -> 0x7fefffff > (size 32 MB) Stack space : 0x7def8000 -> 0x7df00000 (size 32 kB) envfs: > wrong magic on /dev/env0 no valid environment found on /dev/env0. Using > default environment running /env/bin/init... Hit any key to stop autoboot: > 1 phy0: Link is up - 100/Full T DHCP client bound to address > 128.224.168.167 TFTP from server 128.224.168.11 ('zImage-loco' -> '/image= ') > = > Wasn't the board suppose to boot from sd card by default? > = it will if you configure it correctly (ie: check env/config and put the right settings inside to tell it to get the kernel from disk instead of tftp). Eric -- = http://eukrea.com/en/news/104-2012 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox