From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 1/7] add i2c clock support
Date: Mon, 27 Feb 2012 19:59:20 +0100 [thread overview]
Message-ID: <20120227185920.GH3852@pengutronix.de> (raw)
In-Reply-To: <1330330813-21605-1-git-send-email-eric@eukrea.com>
Applied this series.
Thanks
Sascha
On Mon, Feb 27, 2012 at 09:20:07AM +0100, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
> arch/arm/mach-imx/speed-imx53.c | 26 ++++++++++++++++++++++++++
> 1 files changed, 26 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-imx/speed-imx53.c b/arch/arm/mach-imx/speed-imx53.c
> index 0d6ac24..a2385fa 100644
> --- a/arch/arm/mach-imx/speed-imx53.c
> +++ b/arch/arm/mach-imx/speed-imx53.c
> @@ -169,6 +169,31 @@ unsigned long imx_get_fecclk(void)
> return imx_get_ipgclk();
> }
>
> +static unsigned long imx_get_ipg_perclk(void)
> +{
> + u32 reg;
> +
> + reg = ccm_readl(MX5_CCM_CBCDR);
> + if (!(reg & MX5_CCM_CBCDR_PERIPH_CLK_SEL))
> + return pll2_sw_get_rate();
> + reg = ccm_readl(MX5_CCM_CBCMR);
> + switch ((reg & MX5_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >>
> + MX5_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) {
> + case 0:
> + return pll1_main_get_rate();
> + case 1:
> + return pll3_sw_get_rate();
> + /* case 2:
> + TODO : LP_APM */
> + }
> + return 0;
> +}
> +
> +unsigned long imx_get_i2cclk(void)
> +{
> + return imx_get_ipg_perclk();
> +}
> +
> unsigned long imx_get_mmcclk(void)
> {
> u32 reg, prediv, podf, rate;
> @@ -201,4 +226,5 @@ void imx_dump_clocks(void)
> printf("ipg: %ld\n", imx_get_ipgclk());
> printf("fec: %ld\n", imx_get_fecclk());
> printf("gpt: %ld\n", imx_get_gptclk());
> + printf("i2c: %ld\n", imx_get_i2cclk());
> }
> --
> 1.7.7.6
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-02-27 18:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 0:27 [PATCH " Eric Bénard
2012-02-21 0:27 ` [PATCH 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-21 3:48 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 7:03 ` Eric Bénard
2012-02-21 13:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 13:22 ` Eric Bénard
2012-02-21 14:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 15:35 ` Eric Bénard
2012-02-21 15:38 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 20:45 ` Sascha Hauer
2012-02-21 21:09 ` Marc Reilly
2012-02-21 0:27 ` [PATCH 3/7] i.MX53: add silicn revision functions Eric Bénard
2012-02-22 7:33 ` Sascha Hauer
2012-02-27 8:20 ` [PATCH v2 1/7] add i2c clock support Eric Bénard
2012-02-27 8:20 ` [PATCH v2 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-27 8:20 ` [PATCH v2 3/7] i.MX53: add silicon revision functions Eric Bénard
2012-02-27 8:20 ` [PATCH v2 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-27 8:20 ` [PATCH v2 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-27 8:20 ` [PATCH v2 6/7] mx53-loco: add board revision support Eric Bénard
2012-02-27 15:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-27 18:58 ` Sascha Hauer
2012-02-27 8:20 ` [PATCH v2 7/7] mx53-loco: update defconfig Eric Bénard
2012-02-27 18:59 ` Sascha Hauer [this message]
2012-02-21 0:27 ` [PATCH 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-21 0:27 ` [PATCH 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-21 0:27 ` [PATCH 6/7] mx53-loco: add board revision support Eric Bénard
2012-02-21 3:50 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 0:27 ` [PATCH 7/7] mx53-loco: update defconfig Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120227185920.GH3852@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox