From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1S2eAi-0007ie-4D for barebox@lists.infradead.org; Wed, 29 Feb 2012 07:42:02 +0000 Date: Wed, 29 Feb 2012 08:41:53 +0100 From: Sascha Hauer Message-ID: <20120229074153.GS3852@pengutronix.de> References: <1330436471-716-1-git-send-email-robert.jarzmik@free.fr> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1330436471-716-1-git-send-email-robert.jarzmik@free.fr> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH V3] arm/mach-pxa: add mioa701 board To: Robert Jarzmik Cc: barebox@lists.infradead.org On Tue, Feb 28, 2012 at 02:41:11PM +0100, Robert Jarzmik wrote: > Add Mitac MioA701 board initial support. > The support provides basic boot and : > - a console over USB (serial gadget). > - the SD card support > - the MTD docg3 support > - the LCD support > > Add a check in the default environment for a barebox.env > file on the first partition (FAT). If the file exists, > source it instead of the normal boot procedure. > > Signed-off-by: Robert Jarzmik Applied, thanks Sascha > > --- > Since V1: > - taken into account Marc's review > - added SD+MTD > > Since V2: > - added MFP setup for pxafb > - added pwm support for backlight > --- > arch/arm/Makefile | 1 + > arch/arm/boards/mioa701/Makefile | 1 + > arch/arm/boards/mioa701/board.c | 278 ++++++++++++++++++++++ > arch/arm/boards/mioa701/config.h | 22 ++ > arch/arm/boards/mioa701/env/bin/barebox_update | 5 + > arch/arm/boards/mioa701/env/bin/init | 35 +++ > arch/arm/boards/mioa701/env/bin/mtd_env_override | 4 + > arch/arm/boards/mioa701/env/bin/sdcard_override | 16 ++ > arch/arm/boards/mioa701/env/config | 5 + > arch/arm/boards/mioa701/mioa701.h | 81 +++++++ > arch/arm/configs/mioa701_defconfig | 62 +++++ > arch/arm/mach-pxa/Kconfig | 18 ++ > 12 files changed, 528 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boards/mioa701/Makefile > create mode 100644 arch/arm/boards/mioa701/board.c > create mode 100644 arch/arm/boards/mioa701/config.h > create mode 100644 arch/arm/boards/mioa701/env/bin/barebox_update > create mode 100644 arch/arm/boards/mioa701/env/bin/init > create mode 100644 arch/arm/boards/mioa701/env/bin/mtd_env_override > create mode 100644 arch/arm/boards/mioa701/env/bin/sdcard_override > create mode 100644 arch/arm/boards/mioa701/env/config > create mode 100644 arch/arm/boards/mioa701/mioa701.h > create mode 100644 arch/arm/configs/mioa701_defconfig > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 9926280..b28a5b2 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -83,6 +83,7 @@ board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack > board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack > board-$(CONFIG_MACH_IMX21ADS) := imx21ads > board-$(CONFIG_MACH_IMX27ADS) := imx27ads > +board-$(CONFIG_MACH_MIOA701) := mioa701 > board-$(CONFIG_MACH_MMCCPU) := mmccpu > board-$(CONFIG_MACH_MX1ADS) := mx1ads > board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815 > diff --git a/arch/arm/boards/mioa701/Makefile b/arch/arm/boards/mioa701/Makefile > new file mode 100644 > index 0000000..dcfc293 > --- /dev/null > +++ b/arch/arm/boards/mioa701/Makefile > @@ -0,0 +1 @@ > +obj-y += board.o > diff --git a/arch/arm/boards/mioa701/board.c b/arch/arm/boards/mioa701/board.c > new file mode 100644 > index 0000000..6a67a03 > --- /dev/null > +++ b/arch/arm/boards/mioa701/board.c > @@ -0,0 +1,278 @@ > +/* > + * (C) 2011 Robert Jarzmik > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#include "mioa701.h" > + > +/* > + * LTM0305A776C LCD panel timings > + * > + * see: > + * - the LTM0305A776C datasheet, > + * - and the PXA27x Programmers' manual > + */ > +static struct pxafb_videomode mioa701_ltm0305a776c = { > + { > + .pixclock = 220000, /* CLK=4.545 MHz */ > + .xres = 240, > + .yres = 320, > + .hsync_len = 4, > + .vsync_len = 2, > + .left_margin = 6, > + .right_margin = 4, > + .upper_margin = 5, > + .lower_margin = 3, > + }, > + .bpp = 16, > +}; > + > +static void mioa701_lcd_power(int on) > +{ > + gpio_set_value(GPIO87_LCD_POWER, on); > +} > + > +static void mioa701_lcd_backlight(int on) > +{ > + struct pwm_device *pwm0 = pwm_request("pxa_pwm0"); > + > + /* > + * The backlight has a base frequency of 250kHz (<=> 4 ms). > + */ > + if (on) { > + pwm_enable(pwm0); > + pwm_config(pwm0, 2000 * 1024, 4000 * 1024); > + } else { > + pwm_disable(pwm0); > + } > + pwm_free(pwm0); > +} > + > +static struct pxafb_platform_data mioa701_pxafb_info = { > + .mode = &mioa701_ltm0305a776c, > + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, > + .lcd_power = mioa701_lcd_power, > + .backlight_power = mioa701_lcd_backlight, > +}; > + > +#define MIO_LED(_name, _gpio) \ > + { .gpio = _gpio, .active_low = 1, .led = { .name = #_name, } } > +static struct gpio_led leds[] = { > + MIO_LED(charging, GPIO10_LED_nCharging), > + MIO_LED(blue, GPIO97_LED_nBlue), > + MIO_LED(orange, GPIO98_LED_nOrange), > + MIO_LED(vibra, GPIO82_LED_nVibra), > + MIO_LED(keyboard, GPIO115_LED_nKeyboard), > +}; > + > + > +static int is_usb_connected(void) > +{ > + return !gpio_get_value(GPIO13_nUSB_DETECT); > +} > + > +static struct pxa2xx_udc_mach_info mioa701_udc_info = { > + .udc_is_connected = is_usb_connected, > + .gpio_pullup = GPIO22_USB_ENABLE, > +}; > + > +static struct pxamci_platform_data mioa701_mmc_info = { > + .gpio_power = GPIO91_SDIO_EN, > +}; > + > +static int mioa701_devices_init(void) > +{ > + int i; > + void *docg3_iospace; > + > + pxa_add_pwm((void *)0x40b00000, 0); > + pxa_add_fb((void *)0x44000000, &mioa701_pxafb_info); > + pxa_add_mmc((void *)0x41100000, -1, &mioa701_mmc_info); > + docg3_iospace = map_io_sections(0x0, (void *)0xe0000000, 0x2000); > + add_generic_device("docg3", -1, NULL, (ulong) docg3_iospace, 0x2000, > + IORESOURCE_MEM, NULL); > + armlinux_set_bootparams((void *)0xa0000100); > + armlinux_set_architecture(MACH_TYPE_MIOA701); > + > + for (i = 0; i < ARRAY_SIZE(leds); i++) > + led_gpio_register(&leds[i]); > + add_generic_device("pxa27x-udc", 0, NULL, 0x40600000, > + 1024, IORESOURCE_MEM, &mioa701_udc_info); > + return 0; > +} > + > +device_initcall(mioa701_devices_init); > + > +static unsigned long mioa701_pin_config[] = { > + /* Mio global */ > + MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW), > + MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH), > + MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH), > + MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0), > + > + /* Backlight PWM 0 */ > + GPIO16_PWM0_OUT, > + > + /* LCD */ > + GPIOxx_LCD_TFT_16BPP, > + MIO_CFG_OUT(GPIO87_LCD_POWER, AF0, DRIVE_LOW), > + > + /* MMC */ > + GPIO32_MMC_CLK, > + GPIO92_MMC_DAT_0, > + GPIO109_MMC_DAT_1, > + GPIO110_MMC_DAT_2, > + GPIO111_MMC_DAT_3, > + GPIO112_MMC_CMD, > + MIO_CFG_IN(GPIO78_SDIO_RO, AF0), > + MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0), > + MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW), > + > + /* USB */ > + MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0), > + MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), > + > + /* QCI */ > + GPIO12_CIF_DD_7, > + GPIO17_CIF_DD_6, > + GPIO50_CIF_DD_3, > + GPIO51_CIF_DD_2, > + GPIO52_CIF_DD_4, > + GPIO53_CIF_MCLK, > + GPIO54_CIF_PCLK, > + GPIO55_CIF_DD_1, > + GPIO81_CIF_DD_0, > + GPIO82_CIF_DD_5, > + GPIO84_CIF_FV, > + GPIO85_CIF_LV, > + > + /* Bluetooth */ > + MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0), > + GPIO44_BTUART_CTS, > + GPIO42_BTUART_RXD, > + GPIO45_BTUART_RTS, > + GPIO43_BTUART_TXD, > + MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH), > + > + /* GPS */ > + MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW), > + GPIO46_STUART_RXD, > + GPIO47_STUART_TXD, > + > + /* GSM */ > + MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW), > + MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH), > + MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0), > + MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH, > + GPIO34_FFUART_RXD, > + GPIO35_FFUART_CTS, > + GPIO36_FFUART_DCD, > + GPIO37_FFUART_DSR, > + GPIO39_FFUART_TXD, > + GPIO40_FFUART_DTR, > + GPIO41_FFUART_RTS, > + > + /* Sound */ > + GPIO28_AC97_BITCLK, > + GPIO29_AC97_SDATA_IN_0, > + GPIO30_AC97_SDATA_OUT, > + GPIO31_AC97_SYNC, > + GPIO89_AC97_SYSCLK, > + MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0), > + > + /* Leds */ > + MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH), > + MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH), > + > + /* Keyboard */ > + MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH, > + MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0), > + MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0), > + GPIO100_KP_MKIN_0, > + GPIO101_KP_MKIN_1, > + GPIO102_KP_MKIN_2, > + GPIO103_KP_MKOUT_0, > + GPIO104_KP_MKOUT_1, > + GPIO105_KP_MKOUT_2, > + > + /* I2C */ > + GPIO117_I2C_SCL, > + GPIO118_I2C_SDA, > + > + /* Unknown */ > + MFP_CFG_IN(GPIO20, AF0), > + MFP_CFG_IN(GPIO21, AF0), > + MFP_CFG_IN(GPIO33, AF0), > + MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH), > + MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), > + MFP_CFG_IN(GPIO96, AF0), > + MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), > +}; > + > +static int mioa701_coredevice_init(void) > +{ > + unsigned int cclk; > + /* route pins */ > + pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); > + > + CCCR = CCCR_A | 0x20110; > + cclk = 0x02; > + asm volatile("mcr p14, 0, %0, c6, c0, 0 @ set CCLK" > + : : "r" (cclk) : "cc"); > + > + return 0; > +} > +coredevice_initcall(mioa701_coredevice_init); > + > +static int mioa701_mem_init(void) > +{ > + arm_add_mem_device("ram0", 0xa0000000, 64 * 1024 * 1024); > + return 0; > +} > +mem_initcall(mioa701_mem_init); > diff --git a/arch/arm/boards/mioa701/config.h b/arch/arm/boards/mioa701/config.h > new file mode 100644 > index 0000000..390aa30 > --- /dev/null > +++ b/arch/arm/boards/mioa701/config.h > @@ -0,0 +1,22 @@ > +/* > + * (C) 2011 Robert Jarzmik > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#endif /* __CONFIG_H */ > diff --git a/arch/arm/boards/mioa701/env/bin/barebox_update b/arch/arm/boards/mioa701/env/bin/barebox_update > new file mode 100644 > index 0000000..564549b > --- /dev/null > +++ b/arch/arm/boards/mioa701/env/bin/barebox_update > @@ -0,0 +1,5 @@ > +#!/bin/sh > + > +# Page+OOB specific partitions > +addpart /dev/mtdraw0 1081344@3649536(msipl) > +addpart /dev/mtdraw0 270336@3649536(barebox) > diff --git a/arch/arm/boards/mioa701/env/bin/init b/arch/arm/boards/mioa701/env/bin/init > new file mode 100644 > index 0000000..8a54da0 > --- /dev/null > +++ b/arch/arm/boards/mioa701/env/bin/init > @@ -0,0 +1,35 @@ > +#!/bin/sh > + > +PATH=/env/bin > +export PATH > + > +. /env/config > +addpart /dev/mtd0 $mtdparts > + > +usbserial -s "Mio A701 usb gadget" > +led keyboard 0 > + > +sdcard_override > + > +fb0.enable=1 > +bmp /dev/mtd0.barebox-logo > + > +mtd_env_override > +if [ $? = 0 ]; then > + echo "Switching to custom environment" > + /env/init > + exit > +fi > + > +echo "No custom environment found" > +echo -n "Hit any key to stop autoboot: " > +timeout -a $autoboot_timeout > +if [ $? != 0 ]; then > + echo > + echo "Welcome to barebox console" > + exit > +fi > + > +echo "Booting linux kernel on docg3 chip ..." > +bootargs="$bootargs mtdparts=mtd0:$mtdparts root=/dev/mtd4" > +bootm /dev/mtd0.kernel > diff --git a/arch/arm/boards/mioa701/env/bin/mtd_env_override b/arch/arm/boards/mioa701/env/bin/mtd_env_override > new file mode 100644 > index 0000000..faeb4d0 > --- /dev/null > +++ b/arch/arm/boards/mioa701/env/bin/mtd_env_override > @@ -0,0 +1,4 @@ > +#!/bin/sh > + > +loadenv /dev/mtd0.barebox-env > +exit $? > diff --git a/arch/arm/boards/mioa701/env/bin/sdcard_override b/arch/arm/boards/mioa701/env/bin/sdcard_override > new file mode 100644 > index 0000000..4b2ad51 > --- /dev/null > +++ b/arch/arm/boards/mioa701/env/bin/sdcard_override > @@ -0,0 +1,16 @@ > +#!/bin/sh > +# Script to switch to execute sdcard environment scripts if available > +# > +# This enables an override of the default environment if an SD Card > +# is inserted, has a FAT filesystem, and has a barebox.env file in > +# the root directory. > + > +mci0.probe=1 > +if [ $mci0.probe = 1 ]; then > + mkdir /sdcard > + mount /dev/disk0.0 fat /sdcard > + if [ -f /sdcard/barebox.env ]; then > + loadenv /sdcard/barebox.env /env.sd > + /env.sd/bin/init > + fi > +fi > diff --git a/arch/arm/boards/mioa701/env/config b/arch/arm/boards/mioa701/env/config > new file mode 100644 > index 0000000..2cc44fd > --- /dev/null > +++ b/arch/arm/boards/mioa701/env/config > @@ -0,0 +1,5 @@ > +#!/bin/sh > + > +autoboot_timeout=3 > + > +mtdparts="256k@3456k(barebox)ro,256k(barebox-logo),128k(barebox-env),4M(kernel),-(root)" > diff --git a/arch/arm/boards/mioa701/mioa701.h b/arch/arm/boards/mioa701/mioa701.h > new file mode 100644 > index 0000000..20b9b51 > --- /dev/null > +++ b/arch/arm/boards/mioa701/mioa701.h > @@ -0,0 +1,81 @@ > +/* > + * (C) 2011 Robert Jarzmik > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > +#ifndef _MIOA701_H_ > +#define _MIOA701_H_ > + > +#define MIO_CFG_IN(pin, af) \ > + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ > + (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN)) > + > +#define MIO_CFG_OUT(pin, af, state) \ > + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ > + (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) > + > +/* Global GPIOs */ > +#define GPIO9_CHARGE_EN 9 > +#define GPIO18_POWEROFF 18 > +#define GPIO87_LCD_POWER 87 > +#define GPIO96_AC_DETECT 96 > +#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */ > + > +/* USB */ > +#define GPIO13_nUSB_DETECT 13 > +#define GPIO22_USB_ENABLE 22 > + > +/* SDIO bits */ > +#define GPIO78_SDIO_RO 78 > +#define GPIO15_SDIO_INSERT 15 > +#define GPIO91_SDIO_EN 91 > + > +/* Bluetooth */ > +#define GPIO14_BT_nACTIVITY 14 > +#define GPIO83_BT_ON 83 > +#define GPIO77_BT_UNKNOWN1 77 > +#define GPIO86_BT_MAYBE_nRESET 86 > + > +/* GPS */ > +#define GPIO23_GPS_UNKNOWN1 23 > +#define GPIO26_GPS_ON 26 > +#define GPIO27_GPS_RESET 27 > +#define GPIO106_GPS_UNKNOWN2 106 > +#define GPIO107_GPS_UNKNOWN3 107 > + > +/* GSM */ > +#define GPIO24_GSM_MOD_RESET_CMD 24 > +#define GPIO88_GSM_nMOD_ON_CMD 88 > +#define GPIO90_GSM_nMOD_OFF_CMD 90 > +#define GPIO114_GSM_nMOD_DTE_UART_STATE 114 > +#define GPIO25_GSM_MOD_ON_STATE 25 > +#define GPIO113_GSM_EVENT 113 > + > +/* SOUND */ > +#define GPIO12_HPJACK_INSERT 12 > + > +/* LEDS */ > +#define GPIO10_LED_nCharging 10 > +#define GPIO97_LED_nBlue 97 > +#define GPIO98_LED_nOrange 98 > +#define GPIO82_LED_nVibra 82 > +#define GPIO115_LED_nKeyboard 115 > + > +/* Keyboard */ > +#define GPIO0_KEY_POWER 0 > +#define GPIO93_KEY_VOLUME_UP 93 > +#define GPIO94_KEY_VOLUME_DOWN 94 > + > +#endif /* _MIOA701_H */ > diff --git a/arch/arm/configs/mioa701_defconfig b/arch/arm/configs/mioa701_defconfig > new file mode 100644 > index 0000000..2bb3cec > --- /dev/null > +++ b/arch/arm/configs/mioa701_defconfig > @@ -0,0 +1,62 @@ > +CONFIG_ARCH_PXA=y > +CONFIG_AEABI=y > +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y > +CONFIG_ARM_UNWIND=y > +# CONFIG_BANNER is not set > +CONFIG_TEXT_BASE=0xa3f00000 > +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x262144 > +CONFIG_MALLOC_SIZE=0x1000000 > +CONFIG_EXPERIMENTAL=y > +CONFIG_LONGHELP=y > +CONFIG_GLOB=y > +CONFIG_HUSH_GETOPT=y > +CONFIG_CMDLINE_EDITING=y > +CONFIG_AUTO_COMPLETE=y > +CONFIG_MENU=y > +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/mioa701/env" > +CONFIG_DEBUG_INFO=y > +CONFIG_CMD_EDIT=y > +CONFIG_CMD_SLEEP=y > +CONFIG_CMD_SAVEENV=y > +CONFIG_CMD_EXPORT=y > +CONFIG_CMD_PRINTENV=y > +CONFIG_CMD_READLINE=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_ECHO_E=y > +CONFIG_CMD_LOADB=y > +CONFIG_CMD_LOADY=y > +CONFIG_CMD_LOADS=y > +CONFIG_CMD_SAVES=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_IOMEM=y > +CONFIG_CMD_CRC=y > +CONFIG_CMD_CRC_CMP=y > +CONFIG_CMD_FLASH=y > +CONFIG_CMD_BOOTM_SHOW_TYPE=y > +CONFIG_CMD_BOOTM_VERBOSE=y > +CONFIG_CMD_BOOTM_INITRD=y > +CONFIG_CMD_RESET=y > +CONFIG_CMD_TIMEOUT=y > +CONFIG_CMD_PARTITION=y > +CONFIG_CMD_BMP=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_UNCOMPRESS=y > +CONFIG_CMD_LED=y > +CONFIG_DRIVER_SERIAL_PXA=y > +# CONFIG_SPI is not set > +CONFIG_MTD=y > +CONFIG_MTD_RAW_DEVICE=y > +CONFIG_MTD_DOCG3=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_SERIAL=y > +CONFIG_VIDEO=y > +CONFIG_DRIVER_VIDEO_PXA=y > +CONFIG_MCI=y > +CONFIG_MCI_PXA=y > +CONFIG_LED=y > +CONFIG_LED_GPIO=y > +CONFIG_FS_CRAMFS=y > +CONFIG_FS_FAT=y > +CONFIG_FS_FAT_WRITE=y > +CONFIG_FS_FAT_LFN=y > +CONFIG_BZLIB=y > diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig > index 9ef11bb..750f466 100644 > --- a/arch/arm/mach-pxa/Kconfig > +++ b/arch/arm/mach-pxa/Kconfig > @@ -2,9 +2,11 @@ if ARCH_PXA > > config ARCH_TEXT_BASE > hex > + default 0xa0000000 if MACH_MIOA701 > > config BOARDINFO > string > + default "Scoter Mitac Mio A701" if MACH_MIOA701 > > # ---------------------------------------------------------- > > @@ -29,8 +31,24 @@ choice > prompt "PXA27x Board Type" > bool > > +config MACH_MIOA701 > + bool "Mitac Mio A701" > + select BCH_CONST_PARAMS > + select PWM > + help > + Say Y here if you are using a Mitac Mio A701 smartphone > + board > endchoice > > +if MACH_MIOA701 > +config BCH_CONST_M > + int > + default 14 if MACH_MIOA701 > +config BCH_CONST_T > + int > + default 4 if MACH_MIOA701 > +endif > + > endif > > # ---------------------------------------------------------- > -- > 1.7.5.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox