mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Asen Chavdarov Dimov <dimov@ronetix.at>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 1/4] pm9g45: boot from NAND
Date: Fri, 2 Mar 2012 18:18:51 +0100	[thread overview]
Message-ID: <20120302171851.GD12248@game.jcrosoft.org> (raw)
In-Reply-To: <1330707323-8021-1-git-send-email-dimov@ronetix.at>

On 18:55 Fri 02 Mar     , Asen Chavdarov Dimov wrote:
> - change the kernel and rootfs locations
> - correct the NAND mtd partitions
> - fix the DDR RAM location(so BareBox load address)
> - expect the root file system type to be UBIFS
> 
> Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
> ---
> since v1:
> 	this patch I gorgot to send, so it pops-up now
> ---
>  arch/arm/boards/pm9g45/env/config |    8 +-
>  arch/arm/configs/pm9g45_defconfig |  339 +++++++++++++++++++++++++++++++++---
please use savedefconfig to generate the defconfig
>  2 files changed, 314 insertions(+), 33 deletions(-)
> 
> diff --git a/arch/arm/boards/pm9g45/env/config b/arch/arm/boards/pm9g45/env/config
> index 3dea724..1858292 100644
> --- a/arch/arm/boards/pm9g45/env/config
> +++ b/arch/arm/boards/pm9g45/env/config
> @@ -11,9 +11,9 @@ ip=dhcp
>  #eth0.serverip=a.b.c.d
>  
>  # can be either 'nfs', 'tftp' or 'nand'
> -kernel_loc=tftp
> +kernel_loc=nand
>  # can be either 'net', 'nand' or 'initrd'
> -rootfs_loc=net
> +rootfs_loc=nand
>  
>  # can be either 'jffs2' or 'ubifs'
>  rootfs_type=ubifs
> @@ -25,8 +25,8 @@ kernelimage=uImage
>  #kernelimage=Image.lzo
>  
>  nand_device=atmel_nand
> -nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
> -rootfs_mtdblock_nand=3
> +nand_parts="128k(bootstrap)ro,256k(barebox)ro,1664k(bareboxenv),3M(kernel.bb),-(root)"
use kerenel not kernel.bb

why env the 1664k?

Best Regards,
J.
> +rootfs_mtdblock_nand=4
>  
>  autoboot_timeout=3
>  
> diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
> index bf9af22..f05d4de 100644
> --- a/arch/arm/configs/pm9g45_defconfig
> +++ b/arch/arm/configs/pm9g45_defconfig
> @@ -1,55 +1,336 @@
> +#
> +# Automatically generated file; DO NOT EDIT.
> +# Linux/arm 2012.02.0 Barebox Configuration
> +#
> +# CONFIG_BOARD_LINKER_SCRIPT is not set
> +CONFIG_GENERIC_LINKER_SCRIPT=y
> +CONFIG_ARM=y
> +CONFIG_ARM_LINUX=y
> +
> +#
> +# System Type                   
> +#
> +CONFIG_ARCH_AT91=y
> +# CONFIG_ARCH_EP93XX is not set
> +# CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_MXS is not set
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_NOMADIK is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_PXA is not set
> +# CONFIG_ARCH_S3C24xx is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_32=y
> +CONFIG_CPU_ARM926T=y
> +CONFIG_CPU_32v5=y
> +
> +#
> +# processor features
> +#
> +# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> +CONFIG_ARCH_TEXT_BASE=0x73f00000
> +CONFIG_BOARDINFO="Ronetix PM9G45"
> +CONFIG_AT91SAM9G45_RESET=y
> +
> +#
> +# Atmel AT91 System-on-Chip
> +#
> +# CONFIG_ARCH_AT91RM9200 is not set
> +# CONFIG_ARCH_AT91SAM9260 is not set
> +# CONFIG_ARCH_AT91SAM9261 is not set
> +# CONFIG_ARCH_AT91SAM9263 is not set
> +# CONFIG_ARCH_AT91SAM9G10 is not set
> +# CONFIG_ARCH_AT91SAM9G20 is not set
>  CONFIG_ARCH_AT91SAM9G45=y
> +CONFIG_ARCH_BAREBOX_MAX_BARE_INIT_SIZE=0xF000
> +# CONFIG_MACH_AT91SAM9M10G45EK is not set
>  CONFIG_MACH_PM9G45=y
> -CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> -CONFIG_PROMPT="pm9g45:"
> +
> +#
> +# AT91 Board Options
> +#
> +CONFIG_AEABI=y
> +
> +#
> +# Arm specific settings         
> +#
> +CONFIG_CMD_ARM_CPUINFO=y
> +# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
> +CONFIG_ARM_EXCEPTIONS=y
> +# CONFIG_ARM_UNWIND is not set
> +CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
> +CONFIG_GREGORIAN_CALENDER=y
> +CONFIG_HAS_KALLSYMS=y
> +CONFIG_HAS_MODULES=y
> +CONFIG_CMD_MEMORY=y
> +CONFIG_ENV_HANDLING=y
> +CONFIG_GENERIC_GPIO=y
> +CONFIG_FILETYPE=y
> +
> +#
> +# General Settings              
> +#
> +CONFIG_LOCALVERSION=""
> +CONFIG_LOCALVERSION_AUTO=y
> +CONFIG_BANNER=y
> +CONFIG_ENVIRONMENT_VARIABLES=y
> +
> +#
> +# memory layout                 
> +#
> +# CONFIG_MMU is not set
> +CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
> +CONFIG_TEXT_BASE=0x73f00000
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> +CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
> +CONFIG_MEMORY_LAYOUT_DEFAULT=y
> +# CONFIG_MEMORY_LAYOUT_FIXED is not set
> +CONFIG_STACK_SIZE=0x8000
> +CONFIG_MALLOC_SIZE=0x400000
> +# CONFIG_BROKEN is not set
> +# CONFIG_EXPERIMENTAL is not set
> +CONFIG_MALLOC_DLMALLOC=y
> +# CONFIG_MALLOC_TLSF is not set
> +# CONFIG_KALLSYMS is not set
> +CONFIG_PROMPT="barebox:"
> +CONFIG_BAUDRATE=115200
>  CONFIG_LONGHELP=y
> -CONFIG_GLOB=y
> -CONFIG_PROMPT_HUSH_PS2="y"
> -CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CBSIZE=1024
> +CONFIG_MAXARGS=16
> +CONFIG_SHELL_HUSH=y
> +# CONFIG_SHELL_SIMPLE is not set
> +# CONFIG_GLOB is not set
> +CONFIG_PROMPT_HUSH_PS2="> "
> +# CONFIG_HUSH_FANCY_PROMPT is not set
> +CONFIG_HUSH_GETOPT=y
>  CONFIG_CMDLINE_EDITING=y
>  CONFIG_AUTO_COMPLETE=y
> -CONFIG_MENU=y
> -CONFIG_PASSWD_SUM_SHA1=y
> +# CONFIG_MENU is not set
> +# CONFIG_PASSWORD is not set
> +CONFIG_DYNAMIC_CRC_TABLE=y
> +CONFIG_ERRNO_MESSAGES=y
> +CONFIG_TIMESTAMP=y
> +CONFIG_CONSOLE_FULL=y
> +CONFIG_CONSOLE_ACTIVATE_FIRST=y
>  CONFIG_PARTITION=y
> +CONFIG_PARTITION_DISK=y
> +CONFIG_PARTITION_DISK_DOS=y
> +CONFIG_DEFAULT_ENVIRONMENT=y
>  CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
>  CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env"
> +CONFIG_POLLER=y
> +
> +#
> +# Debugging                     
> +#
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_ENABLE_FLASH_NOISE is not set
> +# CONFIG_ENABLE_PARTITION_NOISE is not set
> +CONFIG_ENABLE_DEVICE_NOISE=y
> +CONFIG_COMMAND_SUPPORT=y
> +
> +#
> +# commands                      
> +#
> +
> +#
> +# scripting                     
> +#
>  CONFIG_CMD_EDIT=y
> -CONFIG_CMD_SLEEP=y
> +# CONFIG_CMD_SLEEP is not set
>  CONFIG_CMD_SAVEENV=y
>  CONFIG_CMD_LOADENV=y
>  CONFIG_CMD_EXPORT=y
>  CONFIG_CMD_PRINTENV=y
>  CONFIG_CMD_READLINE=y
> -CONFIG_CMD_MENU=y
> -CONFIG_CMD_MENU_MANAGEMENT=y
> -CONFIG_CMD_PASSWD=y
> -CONFIG_CMD_ECHO_E=y
> -CONFIG_CMD_LOADB=y
> -CONFIG_CMD_MEMINFO=y
> -CONFIG_CMD_MTEST=y
> -CONFIG_CMD_MTEST_ALTERNATIVE=y
> +CONFIG_CMD_TRUE=y
> +CONFIG_CMD_FALSE=y
> +# CONFIG_CMD_LOGIN is not set
> +# CONFIG_CMD_PASSWD is not set
> +# CONFIG_CMD_TIME is not set
> +
> +#
> +# file commands                 
> +#
> +CONFIG_CMD_LS=y
> +CONFIG_CMD_RM=y
> +CONFIG_CMD_CAT=y
> +CONFIG_CMD_MKDIR=y
> +CONFIG_CMD_RMDIR=y
> +CONFIG_CMD_CP=y
> +CONFIG_CMD_PWD=y
> +CONFIG_CMD_CD=y
> +CONFIG_CMD_MOUNT=y
> +CONFIG_CMD_UMOUNT=y
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_NANDTEST is not set
> +
> +#
> +# console                       
> +#
> +CONFIG_CMD_CLEAR=y
> +CONFIG_CMD_ECHO=y
> +# CONFIG_CMD_ECHO_E is not set
> +
> +#
> +# memory                        
> +#
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +# CONFIG_CMD_MEMINFO is not set
> +# CONFIG_CMD_IOMEM is not set
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_CRC_CMP=y
> +# CONFIG_CMD_MD5SUM is not set
> +# CONFIG_CMD_SHA1SUM is not set
> +# CONFIG_CMD_SHA256SUM is not set
> +# CONFIG_CMD_SHA224SUM is not set
> +# CONFIG_CMD_MTEST is not set
> +
> +#
> +# flash                         
> +#
>  CONFIG_CMD_FLASH=y
> -CONFIG_CMD_BOOTM_ZLIB=y
> -CONFIG_CMD_BOOTM_BZLIB=y
> -CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_UBI=y
> +
> +#
> +# booting                       
> +#
> +CONFIG_CMD_BOOTM=y
> +# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
> +CONFIG_CMD_BOOTM_VERBOSE=y
> +# CONFIG_CMD_BOOTM_INITRD is not set
> +# CONFIG_CMD_BOOTM_OFTREE is not set
> +CONFIG_CMD_UIMAGE=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_BOOTU=y
>  CONFIG_CMD_RESET=y
>  CONFIG_CMD_GO=y
> +# CONFIG_CMD_OFTREE is not set
>  CONFIG_CMD_TIMEOUT=y
>  CONFIG_CMD_PARTITION=y
> -CONFIG_CMD_GPIO=y
> -CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_TEST=y
> +CONFIG_CMD_VERSION=y
> +CONFIG_CMD_HELP=y
> +# CONFIG_CMD_MAGICVAR is not set
> +CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_GPIO is not set
> +# CONFIG_CMD_UNCOMPRESS is not set
> +CONFIG_CMD_I2C=y
>  CONFIG_NET=y
>  CONFIG_NET_DHCP=y
> -CONFIG_NET_NFS=y
> +# CONFIG_NET_NFS is not set
>  CONFIG_NET_PING=y
> -CONFIG_NET_TFTP=y
> -CONFIG_NET_TFTP_PUSH=y
> -CONFIG_NET_NETCONSOLE=y
> -CONFIG_NET_RESOLV=y
> +# CONFIG_NET_TFTP is not set
> +# CONFIG_NET_TFTP_PUSH is not set
> +# CONFIG_NET_NETCONSOLE is not set
> +# CONFIG_NET_RESOLV is not set
> +
> +#
> +# Drivers                       
> +#
> +
> +#
> +# serial drivers                
> +#
> +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> +# CONFIG_DRIVER_SERIAL_NS16550 is not set
> +CONFIG_DRIVER_SERIAL_ATMEL=y
> +CONFIG_HAS_MACB=y
> +CONFIG_MIIDEV=y
> +
> +#
> +# Network drivers               
> +#
> +# CONFIG_DRIVER_NET_SMC911X is not set
> +# CONFIG_DRIVER_NET_SMC91111 is not set
>  CONFIG_DRIVER_NET_MACB=y
> -# CONFIG_SPI is not set
> -CONFIG_DRIVER_CFI=y
> -CONFIG_CFI_BUFFER_WRITE=y
> +
> +#
> +# SPI drivers                   
> +#
> +CONFIG_SPI=y
> +CONFIG_DRIVER_SPI_ATMEL=y
> +CONFIG_I2C=y
> +
> +#
> +# I2C Hardware Bus support
> +#
> +
> +#
> +# flash drivers                 
> +#
> +# CONFIG_DRIVER_CFI is not set
> +CONFIG_MTD_M25P80=y
> +CONFIG_MTD_SST25L=y
>  CONFIG_MTD=y
> +CONFIG_MTD_WRITE=y
> +CONFIG_MTD_OOB_DEVICE=y
> +# CONFIG_MTD_RAW_DEVICE is not set
> +
> +#
> +# Self contained MTD devices
> +#
> +# CONFIG_MTD_DOCG3 is not set
>  CONFIG_NAND=y
> +CONFIG_NAND_ECC_SOFT=y
> +CONFIG_NAND_ECC_HW=y
> +CONFIG_NAND_ECC_HW_SYNDROME=y
> +CONFIG_NAND_ECC_HW_NONE=y
> +CONFIG_NAND_INFO=y
> +CONFIG_NAND_READ_OOB=y
> +CONFIG_NAND_BBT=y
> +CONFIG_NAND_ATMEL=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +CONFIG_MTD_NAND_IDS=y
>  CONFIG_UBI=y
> +# CONFIG_DISK is not set
> +# CONFIG_USB is not set
> +# CONFIG_USB_GADGET is not set
> +# CONFIG_VIDEO is not set
> +# CONFIG_MCI is not set
> +CONFIG_CLKDEV_LOOKUP=y
> +
> +#
> +# MFD
> +#
> +# CONFIG_I2C_MC13892 is not set
> +# CONFIG_I2C_MC34704 is not set
> +# CONFIG_I2C_MC9SDZ60 is not set
> +# CONFIG_I2C_LP3972 is not set
> +# CONFIG_I2C_TWL6030 is not set
> +# CONFIG_DRIVER_SPI_MC13783 is not set
> +# CONFIG_LED is not set
> +
> +#
> +# EEPROM support
> +#
> +CONFIG_EEPROM_AT25=y
> +
> +#
> +# Filesystem support            
> +#
> +# CONFIG_FS_CRAMFS is not set
> +CONFIG_FS_RAMFS=y
> +CONFIG_FS_DEVFS=y
> +# CONFIG_FS_FAT is not set
> +CONFIG_PARTITION_NEED_MTD=y
> +
> +#
> +# Library routines
> +#
> +CONFIG_PARAMETER=y
> +CONFIG_UNCOMPRESS=y
> +# CONFIG_ZLIB is not set
> +# CONFIG_BZLIB is not set
> +# CONFIG_GENERIC_FIND_NEXT_BIT is not set
> +# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
> +# CONFIG_LZO_DECOMPRESS is not set
> +CONFIG_CRC32=y
> +# CONFIG_DIGEST is not set
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-03-02 17:28 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-01 16:21 [PATCH 1/3] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-01 16:21 ` [PATCH 2/3] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-01 17:10   ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 16:21 ` [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-01 17:12   ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 15:20     ` RONETIX - Asen Dimov
2012-03-02 17:13       ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 17:08 ` [PATCH 1/3] pm9g45: fix Ethernet Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55 ` [PATCH v2 1/4] pm9g45: boot from NAND Asen Chavdarov Dimov
2012-03-02 16:55   ` [PATCH v2 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-02 17:19     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55   ` [PATCH v2 3/4] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-02 17:21     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55   ` [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-02 17:22     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 17:18   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-03-08 11:37     ` [PATCH v2 1/4] pm9g45: boot from NAND RONETIX - Asen Dimov
2012-03-08 13:05       ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-21 16:43         ` RONETIX - Asen Dimov
2012-03-21 16:27 ` [PATCH v3 " Asen Chavdarov Dimov
2012-03-21 16:27   ` [PATCH v3 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-21 16:27   ` [PATCH v3 3/4] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-22 20:17     ` Sascha Hauer
2012-03-23 12:55       ` RONETIX - Asen Dimov
2012-03-23 15:18         ` Sascha Hauer
2012-03-21 16:27   ` [PATCH v3 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120302171851.GD12248@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=dimov@ronetix.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox