From: Sascha Hauer <s.hauer@pengutronix.de>
To: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] imx_nand_load_image: change all users to use barebox_image_size
Date: Tue, 13 Mar 2012 13:24:31 +0100 [thread overview]
Message-ID: <20120313122431.GX3852@pengutronix.de> (raw)
In-Reply-To: <20120309115821.GA14770@pengutronix.de>
On Fri, Mar 09, 2012 at 12:58:21PM +0100, Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 3 ++-
> arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 3 ++-
> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 3 ++-
> arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 3 ++-
> arch/arm/boards/freescale-mx25-3-stack/3stack.c | 3 ++-
> arch/arm/boards/freescale-mx35-3-stack/3stack.c | 3 ++-
> arch/arm/boards/guf-cupid/lowlevel.c | 3 ++-
> arch/arm/boards/guf-neso/lowlevel.c | 3 ++-
> arch/arm/boards/imx21ads/imx21ads.c | 3 ++-
> arch/arm/boards/karo-tx25/board.c | 3 ++-
> arch/arm/boards/karo-tx25/lowlevel.c | 3 ++-
> arch/arm/boards/pcm037/pcm037.c | 3 ++-
> arch/arm/boards/pcm038/lowlevel.c | 3 ++-
> arch/arm/boards/pcm043/lowlevel.c | 3 ++-
> arch/arm/boards/phycard-i.MX27/pca100.c | 3 ++-
> 15 files changed, 30 insertions(+), 15 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> index 695e75f..1e45779 100644
> --- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> +++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> @@ -28,6 +28,7 @@
> #include <environment.h>
> #include <mach/imx-regs.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <mach/gpio.h>
> #include <io.h>
> #include <asm/mmu.h>
> @@ -279,7 +280,7 @@ console_initcall(eukrea_cpuimx25_console_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> diff --git a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> index 1221973..ff66e92 100644
> --- a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> +++ b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> @@ -29,6 +29,7 @@
> #include <io.h>
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
> #include <asm/system.h>
>
> @@ -41,7 +42,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> index e2766fb..6b233b2 100644
> --- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> +++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
> @@ -30,6 +30,7 @@
> #include <notifier.h>
> #include <mach/gpio.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <generated/mach-types.h>
> #include <mach/pmic.h>
> #include <partition.h>
> @@ -268,7 +269,7 @@ late_initcall(eukrea_cpuimx27_late_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> index 969c813..552b0cf 100644
> --- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> +++ b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> @@ -29,6 +29,7 @@
> #include <io.h>
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
> #include <asm/system.h>
>
> @@ -52,7 +53,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/freescale-mx25-3-stack/3stack.c b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
> index d7e24cf..f684864 100644
> --- a/arch/arm/boards/freescale-mx25-3-stack/3stack.c
> +++ b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
> @@ -27,6 +27,7 @@
> #include <environment.h>
> #include <mach/imx-regs.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <mach/gpio.h>
> #include <io.h>
> #include <partition.h>
> @@ -298,7 +299,7 @@ console_initcall(imx25_console_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
> index 7ae2352..cb30e6c 100644
> --- a/arch/arm/boards/freescale-mx35-3-stack/3stack.c
> +++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
> @@ -37,6 +37,7 @@
> #include <partition.h>
>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <io.h>
> #include <generated/mach-types.h>
>
> @@ -450,6 +451,6 @@ void __bare_init nand_boot(void)
> * The driver is able to detect NAND's pagesize by CPU internal
> * fuses or external pull ups. But not the blocksize...
> */
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
> diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c
> index 396604d..bcaa199 100644
> --- a/arch/arm/boards/guf-cupid/lowlevel.c
> +++ b/arch/arm/boards/guf-cupid/lowlevel.c
> @@ -29,6 +29,7 @@
> #include <io.h>
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
> #include <asm/system.h>
>
> @@ -59,7 +60,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/guf-neso/lowlevel.c b/arch/arm/boards/guf-neso/lowlevel.c
> index b1ad621..a8718e7 100644
> --- a/arch/arm/boards/guf-neso/lowlevel.c
> +++ b/arch/arm/boards/guf-neso/lowlevel.c
> @@ -30,6 +30,7 @@
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> #include <asm/system.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
>
> #ifdef CONFIG_NAND_IMX_BOOT
> @@ -43,7 +44,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/imx21ads/imx21ads.c b/arch/arm/boards/imx21ads/imx21ads.c
> index fde6774..a0c9fb6 100644
> --- a/arch/arm/boards/imx21ads/imx21ads.c
> +++ b/arch/arm/boards/imx21ads/imx21ads.c
> @@ -27,6 +27,7 @@
> #include <environment.h>
> #include <mach/imx-regs.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <io.h>
> #include <mach/gpio.h>
> #include <partition.h>
> @@ -203,7 +204,7 @@ console_initcall(mx21ads_console_init);
> void __bare_init nand_boot(void)
> {
> PCCR0 |= PCCR0_NFC_EN;
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> diff --git a/arch/arm/boards/karo-tx25/board.c b/arch/arm/boards/karo-tx25/board.c
> index bfccd0c..451d91d 100644
> --- a/arch/arm/boards/karo-tx25/board.c
> +++ b/arch/arm/boards/karo-tx25/board.c
> @@ -27,6 +27,7 @@
> #include <environment.h>
> #include <mach/imx-regs.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <mach/gpio.h>
> #include <io.h>
> #include <partition.h>
> @@ -167,7 +168,7 @@ console_initcall(tx25_console_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> diff --git a/arch/arm/boards/karo-tx25/lowlevel.c b/arch/arm/boards/karo-tx25/lowlevel.c
> index 09c0339..35dfe9f 100644
> --- a/arch/arm/boards/karo-tx25/lowlevel.c
> +++ b/arch/arm/boards/karo-tx25/lowlevel.c
> @@ -28,6 +28,7 @@
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> #include <asm/system.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
>
> #ifdef CONFIG_NAND_IMX_BOOT
> @@ -39,7 +40,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/pcm037/pcm037.c b/arch/arm/boards/pcm037/pcm037.c
> index 42a543d..d59612f 100644
> --- a/arch/arm/boards/pcm037/pcm037.c
> +++ b/arch/arm/boards/pcm037/pcm037.c
> @@ -31,6 +31,7 @@
> #include <mach/imx-regs.h>
> #include <mach/iomux-mx31.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <mach/gpio.h>
> #include <io.h>
> #include <asm/mmu.h>
> @@ -245,6 +246,6 @@ console_initcall(imx31_console_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
> diff --git a/arch/arm/boards/pcm038/lowlevel.c b/arch/arm/boards/pcm038/lowlevel.c
> index 3239263..2bc89a0 100644
> --- a/arch/arm/boards/pcm038/lowlevel.c
> +++ b/arch/arm/boards/pcm038/lowlevel.c
> @@ -30,6 +30,7 @@
> #include <asm/barebox-arm.h>
> #include <asm/system.h>
> #include <asm-generic/memory_layout.h>
> +#include <asm-generic/sections.h>
>
> #include "pll.h"
>
> @@ -44,7 +45,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/pcm043/lowlevel.c b/arch/arm/boards/pcm043/lowlevel.c
> index 40e3204..69cc4f1 100644
> --- a/arch/arm/boards/pcm043/lowlevel.c
> +++ b/arch/arm/boards/pcm043/lowlevel.c
> @@ -29,6 +29,7 @@
> #include <io.h>
> #include <mach/imx-nand.h>
> #include <asm/barebox-arm.h>
> +#include <asm-generic/sections.h>
> #include <asm-generic/memory_layout.h>
> #include <asm/system.h>
>
> @@ -57,7 +58,7 @@ static void __bare_init __naked insdram(void)
> r = STACK_BASE + STACK_SIZE - 12;
> __asm__ __volatile__("mov sp, %0" : : "r"(r));
>
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
>
> board_init_lowlevel_return();
> }
> diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
> index 1b43951..a2ea05a 100644
> --- a/arch/arm/boards/phycard-i.MX27/pca100.c
> +++ b/arch/arm/boards/phycard-i.MX27/pca100.c
> @@ -26,6 +26,7 @@
> #include <fec.h>
> #include <mach/gpio.h>
> #include <asm/armlinux.h>
> +#include <asm-generic/sections.h>
> #include <generated/mach-types.h>
> #include <partition.h>
> #include <fs.h>
> @@ -327,7 +328,7 @@ console_initcall(pca100_console_init);
> #ifdef CONFIG_NAND_IMX_BOOT
> void __bare_init nand_boot(void)
> {
> - imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> + imx_nand_load_image((void *)TEXT_BASE, barebox_image_size);
> }
> #endif
>
> --
> 1.7.9.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-03-13 12:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-09 11:58 Michael Grzeschik
2012-03-13 12:24 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120313122431.GX3852@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.grzeschik@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox