From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org,
Patrice Vilchez <patrice.vilchez@atmel.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: Re: [PATCH 0/9] AT91 update rm9200ek support and add sam9x5 support
Date: Mon, 2 Apr 2012 11:14:23 +0200 [thread overview]
Message-ID: <20120402091423.GS3852@pengutronix.de> (raw)
In-Reply-To: <20120330045639.GZ444@game.jcrosoft.org>
On Fri, Mar 30, 2012 at 06:56:39AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> HI,
>
> this patch serie update the rm9200 support with
>
> - USB OHCI
> - USB Device (USB serial)
> - leds
>
> and add the basic support for the sam9x5 series
>
> NB: the hardware ecc PMECC is not yet supported
>
> please pull
> The following changes since commit 79ea2bb5284cc4b5b28a3fa3fee6ede7304e4179:
>
> at91rm9200ek: adjust kernel partition to be able to flash mainline kernel (2012-03-30 12:51:54 +0800)
>
> are available in the git repository at:
>
> git://git.jcrosoft.org/barebox.git at91
Applied, thanks.
If you send pull requests please make sure they don't contain any other
patches. This pull request has the at91-fixes branch in it.
Sascha
>
> for you to fetch changes up to bfd880f58915ae8098a6a0603e1003efc9d6feae:
>
> AT91: at91sam9x5: add chip and board file (2012-03-30 13:00:23 +0800)
>
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (9):
> at91rm9200ek: add ohci support
> at91rm9200ek: add leds support
> at91rm9200ek: add usb serial support
> at91rm9200ek: update defconfig
> atmel_nand: add on_flash_btt option to enable bbt option
> ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro
> ARM: at91: allow to pass the interface id to at91_add_device_eth
> ARM: at91/pio: add new PIO3 features
> AT91: at91sam9x5: add chip and board file
>
> arch/arm/Makefile | 1 +
> arch/arm/boards/at91rm9200ek/env/bin/init_board | 11 +
> arch/arm/boards/at91rm9200ek/init.c | 65 ++++-
> arch/arm/boards/at91sam9260ek/init.c | 2 +-
> arch/arm/boards/at91sam9263ek/init.c | 2 +-
> arch/arm/boards/at91sam9m10g45ek/init.c | 2 +-
> arch/arm/boards/at91sam9x5ek/Makefile | 1 +
> arch/arm/boards/at91sam9x5ek/config.h | 6 +
> arch/arm/boards/at91sam9x5ek/env/config | 38 +++
> arch/arm/boards/at91sam9x5ek/init.c | 167 +++++++++++
> arch/arm/boards/dss11/init.c | 2 +-
> arch/arm/boards/mmccpu/init.c | 2 +-
> arch/arm/boards/pm9263/init.c | 2 +-
> arch/arm/boards/pm9g45/init.c | 2 +-
> arch/arm/boards/tny-a926x/init.c | 2 +-
> arch/arm/boards/usb-a926x/init.c | 2 +-
> arch/arm/configs/at91rm9200ek_defconfig | 18 +-
> arch/arm/configs/at91sam9x5ek_defconfig | 69 +++++
> arch/arm/mach-at91/Kconfig | 25 ++
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/at91rm9200_devices.c | 4 +-
> arch/arm/mach-at91/at91sam9260_devices.c | 4 +-
> arch/arm/mach-at91/at91sam9263_devices.c | 4 +-
> arch/arm/mach-at91/at91sam9g45_devices.c | 4 +-
> arch/arm/mach-at91/at91sam9x5.c | 314 ++++++++++++++++++++
> arch/arm/mach-at91/at91sam9x5_devices.c | 270 +++++++++++++++++
> arch/arm/mach-at91/clock.c | 82 ++++-
> arch/arm/mach-at91/gpio.c | 129 ++++++++-
> arch/arm/mach-at91/include/mach/at91_pio.h | 25 ++
> arch/arm/mach-at91/include/mach/at91_pmc.h | 68 ++++-
> arch/arm/mach-at91/include/mach/at91sam9x5.h | 179 +++++++++++
> .../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 139 +++++++++
> arch/arm/mach-at91/include/mach/board.h | 2 +-
> arch/arm/mach-at91/include/mach/cpu.h | 28 ++
> arch/arm/mach-at91/include/mach/gpio.h | 6 +
> arch/arm/mach-at91/include/mach/hardware.h | 2 +
> drivers/mtd/nand/atmel_nand.c | 6 +
> 37 files changed, 1628 insertions(+), 58 deletions(-)
> create mode 100644 arch/arm/boards/at91rm9200ek/env/bin/init_board
> create mode 100644 arch/arm/boards/at91sam9x5ek/Makefile
> create mode 100644 arch/arm/boards/at91sam9x5ek/config.h
> create mode 100644 arch/arm/boards/at91sam9x5ek/env/config
> create mode 100644 arch/arm/boards/at91sam9x5ek/init.c
> create mode 100644 arch/arm/configs/at91sam9x5ek_defconfig
> create mode 100644 arch/arm/mach-at91/at91sam9x5.c
> create mode 100644 arch/arm/mach-at91/at91sam9x5_devices.c
> create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
> create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
>
> Best Regards,
> J.
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-04-02 9:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-30 4:56 Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 1/9] at91rm9200ek: add ohci support Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 2/9] at91rm9200ek: add leds support Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 3/9] at91rm9200ek: add usb serial support Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 4/9] at91rm9200ek: update defconfig Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 5/9] atmel_nand: add on_flash_btt option to enable bbt option Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 6/9] ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 7/9] ARM: at91: allow to pass the interface id to at91_add_device_eth Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 4:58 ` [PATCH 8/9] ARM: at91/pio: add new PIO3 features Jean-Christophe PLAGNIOL-VILLARD
2012-03-30 5:38 ` [PATCH 9/9] AT91: at91sam9x5: add chip and board file Jean-Christophe PLAGNIOL-VILLARD
2012-04-02 9:14 ` Sascha Hauer [this message]
2012-04-02 9:21 ` [PATCH 0/9] AT91 update rm9200ek support and add sam9x5 support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120402091423.GS3852@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=patrice.vilchez@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox