* Currently broken defconfigs in barebox master branch
@ 2012-04-05 9:21 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2012-04-05 9:21 UTC (permalink / raw)
To: barebox
Hi All,
The following is the result of compiling all defconfigs in the current
master branch. Any help fixing these is very appreciated.
Thanks
Sascha
------------------------------------------------------------
Compiling arm defconfigs
Cross Compiler: /opt/OSELAS.Toolchain-2011.11.0/arm-v5te-linux-gnueabi/gcc-4.6.2-glibc-2.14.1-binutils-2.21.1a-kernel-2.6.39-sanitized/bin/arm-v5te-linux-gnueabi-
------------------------------------------------------------
config: a9m2410_defconfig
------------------------------------------------------------
config: a9m2440_defconfig
------------------------------------------------------------
config: at91rm9200ek_defconfig
------------------------------------------------------------
config: at91sam9260ek_defconfig
make: *** [barebox.bin] Error 1
------------------------------------------------------------
config: at91sam9261ek_defconfig
------------------------------------------------------------
config: at91sam9263ek_defconfig
------------------------------------------------------------
config: at91sam9g10ek_defconfig
------------------------------------------------------------
config: at91sam9g20ek_defconfig
make: *** [barebox.bin] Error 1
------------------------------------------------------------
config: at91sam9m10g45ek_defconfig
------------------------------------------------------------
config: at91sam9x5ek_defconfig
------------------------------------------------------------
config: chumbyone_defconfig
arch/arm/mach-mxs/iomux-imx.c: In function 'imx_gpio_mode':
arch/arm/mach-mxs/iomux-imx.c:131:2: warning: implicit declaration of function 'BK_PRESENT' [-Wimplicit-function-declaration]
arch/arm/mach-mxs/iomux-imx.c:133:3: warning: implicit declaration of function 'GET_BITKEEPER' [-Wimplicit-function-declaration]
arch/arm/mach-mxs/built-in.o: In function `imx_gpio_mode':
/home/sha/dude/barebox/barebox/arch/arm/mach-mxs/iomux-imx.c:131: undefined reference to `BK_PRESENT'
/home/sha/dude/barebox/barebox/arch/arm/mach-mxs/iomux-imx.c:133: undefined reference to `GET_BITKEEPER'
make: *** [barebox] Error 1
------------------------------------------------------------
config: cupid_defconfig
------------------------------------------------------------
config: dss11_defconfig
------------------------------------------------------------
config: edb93xx_defconfig
------------------------------------------------------------
config: eukrea_cpuimx25_defconfig
------------------------------------------------------------
config: eukrea_cpuimx27_defconfig
arch/arm/mach-imx/include/mach/imx27-regs.h: Assembler messages:
arch/arm/mach-imx/include/mach/imx27-regs.h:243: Error: bad instruction `static inline void imx27_setup_weimcs(size_t cs,unsigned upper,unsigned lower,unsigned addional)'
arch/arm/mach-imx/include/mach/imx27-regs.h:244: Error: junk at end of line, first unrecognized character is `{'
arch/arm/mach-imx/include/mach/imx27-regs.h:245: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:246: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:247: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:248: Error: junk at end of line, first unrecognized character is `}'
make[1]: *** [arch/arm/boards/eukrea_cpuimx27/lowlevel_init.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [arch/arm/boards/eukrea_cpuimx27] Error 2
make: *** Waiting for unfinished jobs....
------------------------------------------------------------
config: eukrea_cpuimx35_defconfig
------------------------------------------------------------
config: eukrea_cpuimx51_defconfig
------------------------------------------------------------
config: freescale_mx25_3stack_defconfig
------------------------------------------------------------
config: freescale_mx35_3stack_defconfig
------------------------------------------------------------
config: freescale_mx51_babbage_defconfig
------------------------------------------------------------
config: freescale_mx53_loco_defconfig
------------------------------------------------------------
config: freescale_mx53_smd_defconfig
------------------------------------------------------------
config: imx23evk_defconfig
arch/arm/mach-mxs/iomux-imx.c: In function 'imx_gpio_mode':
arch/arm/mach-mxs/iomux-imx.c:131:2: warning: implicit declaration of function 'BK_PRESENT' [-Wimplicit-function-declaration]
arch/arm/mach-mxs/iomux-imx.c:133:3: warning: implicit declaration of function 'GET_BITKEEPER' [-Wimplicit-function-declaration]
arch/arm/mach-mxs/built-in.o: In function `imx_gpio_mode':
/home/sha/dude/barebox/barebox/arch/arm/mach-mxs/iomux-imx.c:131: undefined reference to `BK_PRESENT'
/home/sha/dude/barebox/barebox/arch/arm/mach-mxs/iomux-imx.c:133: undefined reference to `GET_BITKEEPER'
make: *** [barebox] Error 1
------------------------------------------------------------
config: imx28evk_defconfig
------------------------------------------------------------
config: mini2440_defconfig
------------------------------------------------------------
config: mioa701_defconfig
------------------------------------------------------------
config: mmccpu_defconfig
------------------------------------------------------------
config: mx21ads_defconfig
------------------------------------------------------------
config: mx27ads_defconfig
arch/arm/mach-imx/include/mach/imx27-regs.h: Assembler messages:
arch/arm/mach-imx/include/mach/imx27-regs.h:243: Error: bad instruction `static inline void imx27_setup_weimcs(size_t cs,unsigned upper,unsigned lower,unsigned addional)'
arch/arm/mach-imx/include/mach/imx27-regs.h:244: Error: junk at end of line, first unrecognized character is `{'
arch/arm/mach-imx/include/mach/imx27-regs.h:245: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:246: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:247: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:248: Error: junk at end of line, first unrecognized character is `}'
make[1]: *** [arch/arm/boards/imx27ads/lowlevel_init.o] Error 1
make: *** [arch/arm/boards/imx27ads] Error 2
make: *** Waiting for unfinished jobs....
------------------------------------------------------------
config: neso_defconfig
arch/arm/mach-imx/include/mach/imx27-regs.h: Assembler messages:
arch/arm/mach-imx/include/mach/imx27-regs.h:243: Error: bad instruction `static inline void imx27_setup_weimcs(size_t cs,unsigned upper,unsigned lower,unsigned addional)'
arch/arm/mach-imx/include/mach/imx27-regs.h:244: Error: junk at end of line, first unrecognized character is `{'
arch/arm/mach-imx/include/mach/imx27-regs.h:245: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:246: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:247: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:248: Error: junk at end of line, first unrecognized character is `}'
make[1]: *** [arch/arm/boards/guf-neso/pll_init.o] Error 1
make: *** [arch/arm/boards/guf-neso] Error 2
make: *** Waiting for unfinished jobs....
------------------------------------------------------------
config: netx_nxdb500_defconfig
------------------------------------------------------------
config: nhk8815_defconfig
------------------------------------------------------------
config: omap3430_sdp3430_per_uart_defconfig
------------------------------------------------------------
config: omap3530_beagle_defconfig
------------------------------------------------------------
config: omap3530_beagle_per_uart_defconfig
------------------------------------------------------------
config: omap3530_beagle_xload_defconfig
------------------------------------------------------------
config: omap3_evm_defconfig
------------------------------------------------------------
config: panda_defconfig
------------------------------------------------------------
config: panda_xload_defconfig
------------------------------------------------------------
config: pca100_defconfig
arch/arm/mach-imx/include/mach/imx27-regs.h: Assembler messages:
arch/arm/mach-imx/include/mach/imx27-regs.h:243: Error: bad instruction `static inline void imx27_setup_weimcs(size_t cs,unsigned upper,unsigned lower,unsigned addional)'
arch/arm/mach-imx/include/mach/imx27-regs.h:244: Error: junk at end of line, first unrecognized character is `{'
arch/arm/mach-imx/include/mach/imx27-regs.h:245: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:246: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:247: Error: junk at end of line, first unrecognized character is `('
arch/arm/mach-imx/include/mach/imx27-regs.h:248: Error: junk at end of line, first unrecognized character is `}'
make[1]: *** [arch/arm/boards/phycard-i.MX27/lowlevel_init.o] Error 1
make: *** [arch/arm/boards/phycard-i.MX27] Error 2
make: *** Waiting for unfinished jobs....
------------------------------------------------------------
config: pcm037_defconfig
arch/arm/mach-imx/nand.c:108:2: warning: #warning using empty imx_nand_set_layout(). NAND flash will not work properly if not booting from it [-Wcpp]
------------------------------------------------------------
config: pcm038_defconfig
------------------------------------------------------------
config: pcm043_defconfig
------------------------------------------------------------
config: pcm049_defconfig
------------------------------------------------------------
config: pcm049_xload_defconfig
------------------------------------------------------------
config: phycard_a_l1_defconfig
------------------------------------------------------------
config: phycard_a_xl2_defconfig
------------------------------------------------------------
config: phycard_a_xl2_xload_defconfig
------------------------------------------------------------
config: pm9261_defconfig
------------------------------------------------------------
config: pm9263_defconfig
------------------------------------------------------------
config: pm9g45_defconfig
arch/arm/mach-at91/at91sam9g45_devices.c:305:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/mach-at91/at91sam9g45_devices.c:309:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
------------------------------------------------------------
config: scb9328_defconfig
------------------------------------------------------------
config: tny_a9260_defconfig
------------------------------------------------------------
config: tny_a9263_defconfig
------------------------------------------------------------
config: tny_a9g20_defconfig
------------------------------------------------------------
config: tqma53_defconfig
------------------------------------------------------------
config: tx25stk5_defconfig
------------------------------------------------------------
config: tx28stk5_defconfig
------------------------------------------------------------
config: usb_a9260_defconfig
------------------------------------------------------------
config: usb_a9263_128mib_defconfig
------------------------------------------------------------
config: usb_a9263_defconfig
------------------------------------------------------------
config: usb_a9g20_128mib_defconfig
------------------------------------------------------------
config: usb_a9g20_defconfig
------------------------------------------------------------
config: versatilepb_defconfig
------------------------------------------------------------
Compiling blackfin defconfigs
Cross Compiler: /opt/bfin/bfin-elf-2010R1-gcc-4.3/bin/bfin-elf-
------------------------------------------------------------
config: ipe337_defconfig
------------------------------------------------------------
Compiling mips defconfigs
Cross Compiler: /opt/OSELAS.Toolchain-2011.11.0/mipsel-softfloat-linux-gnu/gcc-4.2.3-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/bin/mipsel-softfloat-linux-gnu-
------------------------------------------------------------
config: dlink-dir-320_defconfig
------------------------------------------------------------
config: qemu-malta_defconfig
------------------------------------------------------------
Compiling nios2 defconfigs
Cross Compiler: /ptx/opt/Linux-i686/nios/nios2-linux-gcc-4.1.2-glibc-2.5-binutils-2.17/bin/nios2-linux-gnu-
------------------------------------------------------------
config: generic_defconfig
------------------------------------------------------------
Compiling openrisc defconfigs
Cross Compiler: /opt/openrisc/bin/or32-linux-
------------------------------------------------------------
config: generic_defconfig
------------------------------------------------------------
Compiling ppc defconfigs
Cross Compiler: /opt/OSELAS.Toolchain-2011.11.0/powerpc-603e-linux-gnu/gcc-4.6.2-glibc-2.14.1-binutils-2.21.1a-kernel-2.6.39-sanitized/bin/powerpc-603e-linux-gnu-
------------------------------------------------------------
config: pcm030_defconfig
------------------------------------------------------------
Compiling sandbox defconfigs
Cross Compiler:
------------------------------------------------------------
config: sandbox_defconfig
drivers/base/driver.c: In function ‘dev_get_mem_region’:
drivers/base/driver.c:251:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/base/driver.c: In function ‘dev_request_mem_region’:
drivers/base/driver.c:265:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
------------------------------------------------------------
Compiling x86 defconfigs
Cross Compiler: /opt/OSELAS.Toolchain-2011.03.1/i586-unknown-linux-gnu/gcc-4.5.2-glibc-2.13-binutils-2.21-kernel-2.6.36-sanitized/bin/i586-unknown-linux-gnu-
------------------------------------------------------------
config: generic_defconfig
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-04-05 9:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-05 9:21 Currently broken defconfigs in barebox master branch Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox