* [Pull request] Minimal S5PV210 support
@ 2012-05-12 16:23 Alexey Galakhov
2012-05-13 9:09 ` Sascha Hauer
0 siblings, 1 reply; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-12 16:23 UTC (permalink / raw)
To: barebox
This is minimal working Samsung S5PV210 CPU support and very minimal
example Tiny210 board support. No working MMC or NAND drivers yet.
It is able to start from MMC using iROM, can blink LEDs and has working
command-line. It has working DRAM and clock initialization. Also there
is BL1 file cooker.
The checksummed image is named barebox.s5p and should be dd-ed from 1st
512-byte sector of an MMC card.
TODO: add S5P NAND driver, add MMC driver.
TODO: get rid of iROM booting.
TODO: support USB and DM9000 in Tiny210.
The following changes since commit c7c32736bcd428ef146fa49846defaeff0679fdb:
i2c: Fix barebox crash when 'count' is not set for i2c_read command
(2012-05-11 20:12:19 +0200)
are available in the git repository at:
git://github.com/agalakhov/barebox.git master
for you to fetch changes up to 1a50adbbea14a995e14301725b969680410a3f24:
S5P boot header and image generator (2012-05-12 22:08:58 +0600)
----------------------------------------------------------------
Alexey Galakhov (9):
Support most Samsung SoCs in S3C serial driver
Fine split S3C arch dependencies from generic code
Minimal S5PV210 + Tiny210 support (2nd stage only)
S5PV210 iROM magic boot code
S5P DRAM support
S5P lowlevel clock init
Revert "S5PV210 iROM magic boot code"
S5P iROM boot support - improved
S5P boot header and image generator
.gitignore | 2 +
arch/arm/Kconfig | 6 +
arch/arm/Makefile | 8 +
arch/arm/boards/a9m2410/a9m2410.c | 10 +-
arch/arm/boards/a9m2410/config.h | 2 +-
arch/arm/boards/a9m2410/lowlevel_init.S | 2 +-
arch/arm/boards/a9m2440/a9m2410dev.c | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 10 +-
arch/arm/boards/a9m2440/config.h | 2 +-
arch/arm/boards/a9m2440/lowlevel_init.S | 4 +-
arch/arm/boards/mini2440/config.h | 2 +-
arch/arm/boards/mini2440/lowlevel_init.S | 2 +-
arch/arm/boards/mini2440/mini2440.c | 10 +-
arch/arm/boards/tiny210/Makefile | 1 +
arch/arm/boards/tiny210/config.h | 23 +
arch/arm/boards/tiny210/lowlevel.c | 58 ++
arch/arm/boards/tiny210/tiny210.c | 113 +++
arch/arm/configs/a9m2410_defconfig | 2 +-
arch/arm/configs/a9m2440_defconfig | 4 +-
arch/arm/configs/mini2440_defconfig | 2 +-
arch/arm/mach-samsung/Kconfig | 63 +-
arch/arm/mach-samsung/Makefile | 8 +-
.../{s3c24xx-clocks.c => clocks-s3c24x0.c} | 17 +
arch/arm/mach-samsung/clocks-s5pcxx.c | 98 +++
arch/arm/mach-samsung/generic.c | 112 ---
arch/arm/mach-samsung/gpio-s3c24x0.c | 2 +-
arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++
.../arm/mach-samsung/include/mach/clocks-s3c24x0.h | 24 +
arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h | 55 ++
.../mach/{s3c24xx-gpio.h => gpio-s3c24x0.h} | 6 +-
arch/arm/mach-samsung/include/mach/gpio.h | 3 +
arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h | 69 ++
arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 52 ++
arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798
++++++++++++++++++++
.../mach/{s3c24xx-nand.h => nand-s3c24x0.h} | 4 +-
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 25 +-
arch/arm/mach-samsung/include/mach/s3c-generic.h | 13 +-
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 56 +-
arch/arm/mach-samsung/include/mach/s5pcxx-irom.h | 32 +
.../{lowlevel-init.S => lowlevel-s3c24x0.S} | 12 +-
arch/arm/mach-samsung/lowlevel-s5pcxx.c | 61 ++
arch/arm/mach-samsung/mem-s3c24x0.c | 143 ++++
arch/arm/mach-samsung/mem-s5pcxx.c | 260 +++++++
arch/arm/mach-samsung/s5p-irom-boot.c | 59 ++
drivers/mtd/nand/nand_s3c24xx.c | 16 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/serial_s3c.c | 55 +-
scripts/Makefile | 1 +
scripts/s5p_cksum.c | 140 ++++
49 files changed, 2319 insertions(+), 255 deletions(-)
create mode 100644 arch/arm/boards/tiny210/Makefile
create mode 100644 arch/arm/boards/tiny210/config.h
create mode 100644 arch/arm/boards/tiny210/lowlevel.c
create mode 100644 arch/arm/boards/tiny210/tiny210.c
rename arch/arm/mach-samsung/{s3c24xx-clocks.c => clocks-s3c24x0.c} (91%)
create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
rename arch/arm/mach-samsung/include/mach/{s3c24xx-gpio.h =>
gpio-s3c24x0.h} (96%)
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
rename arch/arm/mach-samsung/include/mach/{s3c24xx-nand.h =>
nand-s3c24x0.h} (95%)
create mode 100644 arch/arm/mach-samsung/include/mach/s5pcxx-irom.h
rename arch/arm/mach-samsung/{lowlevel-init.S => lowlevel-s3c24x0.S} (96%)
create mode 100644 arch/arm/mach-samsung/lowlevel-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/mem-s3c24x0.c
create mode 100644 arch/arm/mach-samsung/mem-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/s5p-irom-boot.c
create mode 100644 scripts/s5p_cksum.c
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [Pull request] Minimal S5PV210 support
2012-05-12 16:23 [Pull request] Minimal S5PV210 support Alexey Galakhov
@ 2012-05-13 9:09 ` Sascha Hauer
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
0 siblings, 1 reply; 28+ messages in thread
From: Sascha Hauer @ 2012-05-13 9:09 UTC (permalink / raw)
To: Alexey Galakhov; +Cc: barebox
Hi Alexey,
On Sat, May 12, 2012 at 10:23:02PM +0600, Alexey Galakhov wrote:
> This is minimal working Samsung S5PV210 CPU support and very minimal
> example Tiny210 board support. No working MMC or NAND drivers yet.
>
> It is able to start from MMC using iROM, can blink LEDs and has working
> command-line. It has working DRAM and clock initialization. Also there
> is BL1 file cooker.
>
> The checksummed image is named barebox.s5p and should be dd-ed from 1st
> 512-byte sector of an MMC card.
>
> TODO: add S5P NAND driver, add MMC driver.
> TODO: get rid of iROM booting.
> TODO: support USB and DM9000 in Tiny210.
>
> The following changes since commit c7c32736bcd428ef146fa49846defaeff0679fdb:
>
> i2c: Fix barebox crash when 'count' is not set for i2c_read command
> (2012-05-11 20:12:19 +0200)
>
> are available in the git repository at:
>
> git://github.com/agalakhov/barebox.git master
>
> for you to fetch changes up to 1a50adbbea14a995e14301725b969680410a3f24:
>
> S5P boot header and image generator (2012-05-12 22:08:58 +0600)
>
> ----------------------------------------------------------------
> Alexey Galakhov (9):
> Support most Samsung SoCs in S3C serial driver
> Fine split S3C arch dependencies from generic code
> Minimal S5PV210 + Tiny210 support (2nd stage only)
> S5PV210 iROM magic boot code
> S5P DRAM support
> S5P lowlevel clock init
> Revert "S5PV210 iROM magic boot code"
> S5P iROM boot support - improved
> S5P boot header and image generator
I can't see these patches on the list. Can you post them first?
Otherwise I can't pull this series.
Thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 0/9] Minimal S5PV210 support
2012-05-13 9:09 ` Sascha Hauer
@ 2012-05-13 12:39 ` Alexey Galakhov
2012-05-13 12:39 ` [PATCH 1/9] Support most Samsung SoCs in S3C serial driver Alexey Galakhov
` (8 more replies)
0 siblings, 9 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:39 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
This is minimal working Samsung S5PV210 CPU support and very minimal
example Tiny210 board support. No working MMC or NAND drivers yet.
It is able to start from MMC using iROM, can blink LEDs and has working
command-line. It has working DRAM and clock initialization. Also there
is BL1 file cooker.
The checksummed image is named barebox.s5p and should be dd-ed
from 1st 512-byte sector of an MMC card.
TODO: add S5P NAND driver, add MMC driver.
TODO: get rid of iROM booting.
TODO: support USB and DM9000 in Tiny210.
Alexey Galakhov (9):
Support most Samsung SoCs in S3C serial driver
Fine split S3C arch dependencies from generic code
Minimal S5PV210 + Tiny210 support (2nd stage only)
S5PV210 iROM magic boot code
S5P DRAM support
S5P lowlevel clock init
Revert "S5PV210 iROM magic boot code"
S5P iROM boot support - improved
S5P boot header and image generator
.gitignore | 2 +
arch/arm/Kconfig | 6 +
arch/arm/Makefile | 8 +
arch/arm/boards/a9m2410/a9m2410.c | 10 +-
arch/arm/boards/a9m2410/config.h | 2 +-
arch/arm/boards/a9m2410/lowlevel_init.S | 2 +-
arch/arm/boards/a9m2440/a9m2410dev.c | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 10 +-
arch/arm/boards/a9m2440/config.h | 2 +-
arch/arm/boards/a9m2440/lowlevel_init.S | 4 +-
arch/arm/boards/mini2440/config.h | 2 +-
arch/arm/boards/mini2440/lowlevel_init.S | 2 +-
arch/arm/boards/mini2440/mini2440.c | 10 +-
arch/arm/boards/tiny210/Makefile | 1 +
arch/arm/boards/tiny210/config.h | 23 +
arch/arm/boards/tiny210/lowlevel.c | 58 ++
arch/arm/boards/tiny210/tiny210.c | 113 +++
arch/arm/configs/a9m2410_defconfig | 2 +-
arch/arm/configs/a9m2440_defconfig | 4 +-
arch/arm/configs/mini2440_defconfig | 2 +-
arch/arm/mach-samsung/Kconfig | 63 +-
arch/arm/mach-samsung/Makefile | 8 +-
arch/arm/mach-samsung/clocks-s3c24x0.c | 157 ++++
arch/arm/mach-samsung/clocks-s5pcxx.c | 98 +++
arch/arm/mach-samsung/generic.c | 112 ---
arch/arm/mach-samsung/gpio-s3c24x0.c | 2 +-
arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++
.../arm/mach-samsung/include/mach/clocks-s3c24x0.h | 24 +
arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h | 55 ++
arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h | 77 ++
arch/arm/mach-samsung/include/mach/gpio.h | 3 +
arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h | 69 ++
arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 52 ++
arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798 ++++++++++++++++++++
arch/arm/mach-samsung/include/mach/nand-s3c24x0.h | 54 ++
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 25 +-
arch/arm/mach-samsung/include/mach/s3c-generic.h | 13 +-
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 56 +-
arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h | 77 --
arch/arm/mach-samsung/include/mach/s3c24xx-nand.h | 54 --
arch/arm/mach-samsung/include/mach/s5pcxx-irom.h | 32 +
arch/arm/mach-samsung/lowlevel-init.S | 317 --------
arch/arm/mach-samsung/lowlevel-s3c24x0.S | 317 ++++++++
arch/arm/mach-samsung/lowlevel-s5pcxx.c | 61 ++
arch/arm/mach-samsung/mem-s3c24x0.c | 143 ++++
arch/arm/mach-samsung/mem-s5pcxx.c | 260 +++++++
arch/arm/mach-samsung/s3c24xx-clocks.c | 140 ----
arch/arm/mach-samsung/s5p-irom-boot.c | 59 ++
drivers/mtd/nand/nand_s3c24xx.c | 16 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/serial_s3c.c | 55 +-
scripts/Makefile | 1 +
scripts/s5p_cksum.c | 140 ++++
53 files changed, 2896 insertions(+), 832 deletions(-)
create mode 100644 arch/arm/boards/tiny210/Makefile
create mode 100644 arch/arm/boards/tiny210/config.h
create mode 100644 arch/arm/boards/tiny210/lowlevel.c
create mode 100644 arch/arm/boards/tiny210/tiny210.c
create mode 100644 arch/arm/mach-samsung/clocks-s3c24x0.c
create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/nand-s3c24x0.h
delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h
delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
create mode 100644 arch/arm/mach-samsung/include/mach/s5pcxx-irom.h
delete mode 100644 arch/arm/mach-samsung/lowlevel-init.S
create mode 100644 arch/arm/mach-samsung/lowlevel-s3c24x0.S
create mode 100644 arch/arm/mach-samsung/lowlevel-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/mem-s3c24x0.c
create mode 100644 arch/arm/mach-samsung/mem-s5pcxx.c
delete mode 100644 arch/arm/mach-samsung/s3c24xx-clocks.c
create mode 100644 arch/arm/mach-samsung/s5p-irom-boot.c
create mode 100644 scripts/s5p_cksum.c
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 1/9] Support most Samsung SoCs in S3C serial driver
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
@ 2012-05-13 12:39 ` Alexey Galakhov
2012-05-13 12:39 ` [PATCH 2/9] Fine split S3C arch dependencies from generic code Alexey Galakhov
` (7 subsequent siblings)
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:39 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/mach-samsung/include/mach/s3c-generic.h | 4 ++
arch/arm/mach-samsung/s3c24xx-clocks.c | 17 +++++++
drivers/serial/serial_s3c.c | 55 +++++++++++++++-------
3 files changed, 59 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 4ea3dd7..5d3808e 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -30,5 +30,9 @@ uint32_t s3c_get_fclk(void);
uint32_t s3c_get_hclk(void);
uint32_t s3c_get_pclk(void);
uint32_t s3c_get_uclk(void);
+
+unsigned s3c_get_uart_clk(unsigned src);
+
uint32_t s3c24xx_get_memory_size(void);
+
void s3c24xx_disable_second_sdram_bank(void);
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
index a99d1b9..38d8b75 100644
--- a/arch/arm/mach-samsung/s3c24xx-clocks.c
+++ b/arch/arm/mach-samsung/s3c24xx-clocks.c
@@ -117,6 +117,23 @@ uint32_t s3c24_get_uclk(void)
return s3c_get_upllclk();
}
+/**
+ * Return correct UART frequency based on the UCON register
+ */
+unsigned s3c_get_uart_clk(unsigned src)
+{
+ switch (src & 3) {
+ case 0:
+ case 2:
+ return s3c_get_pclk();
+ case 1:
+ return 0; /* TODO UEXTCLK */
+ case 3:
+ return 0; /* TODO FCLK/n */
+ }
+ return 0; /* not reached, to make compiler happy */
+}
+
/**
* Show the user the current clock settings
*/
diff --git a/drivers/serial/serial_s3c.c b/drivers/serial/serial_s3c.c
index 2bdc1df..7a9b355 100644
--- a/drivers/serial/serial_s3c.c
+++ b/drivers/serial/serial_s3c.c
@@ -40,6 +40,17 @@
#define UTXH 0x20 /* transmitt */
#define URXH 0x24 /* receive */
#define UBRDIV 0x28 /* baudrate generator */
+#ifdef S3C_UART_HAS_UBRDIVSLOT
+# define UBRDIVSLOT 0x2c /* baudrate slot generator */
+#endif
+#ifdef S3C_UART_HAS_UINTM
+# define UINTM 0x38 /* interrupt mask register */
+#endif
+
+#ifndef S3C_UART_CLKSEL
+/* Use pclk */
+# define S3C_UART_CLKSEL 0
+#endif
struct s3c_uart {
void __iomem *regs;
@@ -51,26 +62,32 @@ struct s3c_uart {
static unsigned s3c_get_arch_uart_input_clock(void __iomem *base)
{
unsigned reg = readw(base + UCON);
-
- switch (reg & 0xc00) {
- case 0x000:
- case 0x800:
- return s3c_get_pclk();
- case 0x400:
- break; /* TODO UEXTCLK */
- case 0xc00:
- break; /* TODO FCLK/n */
- }
-
- return 0; /* not nice, but we can't emit an error message! */
+ reg = (reg >> 10) & 0x3;
+ return s3c_get_uart_clk(reg);
}
+#ifdef S3C_UART_HAS_UBRDIVSLOT
+/*
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register. Refer the datasheet
+ * for further details
+ */
+static const uint16_t udivslot_table[] __maybe_unused = {
+ 0x0000, 0x0080, 0x0808, 0x0888, 0x2222, 0x4924, 0x4A52, 0x54AA,
+ 0x5555, 0xD555, 0xD5D5, 0xDDD5, 0xDDDD, 0xDFDD, 0xDFDF, 0xFFDF,
+};
+#endif
+
static int s3c_serial_setbaudrate(struct console_device *cdev, int baudrate)
{
struct s3c_uart *priv = to_s3c_uart(cdev);
void __iomem *base = priv->regs;
unsigned val;
+#ifdef S3C_UART_HAS_UBRDIVSLOT
+ val = s3c_get_arch_uart_input_clock(base) / baudrate;
+ writew(udivslot_table[val & 15], base + UBRDIVSLOT);
+#endif
val = s3c_get_arch_uart_input_clock(base) / (16 * baudrate) - 1;
writew(val, base + UBRDIV);
@@ -88,11 +105,15 @@ static int s3c_serial_init_port(struct console_device *cdev)
/* Normal,No parity,1 stop,8 bit */
writeb(0x03, base + ULCON);
- /*
- * tx=level,rx=edge,disable timeout int.,enable rx error int.,
- * normal,interrupt or polling
- */
- writew(0x0245, base + UCON);
+
+ /* tx=level,rx=edge,disable timeout int.,enable rx error int.,
+ * normal, interrupt or polling, no pre-divider */
+ writew(0x0245 | ((S3C_UART_CLKSEL) << 10), base + UCON);
+
+#ifdef S3C_UART_HAS_UINTM
+ /* 'interrupt or polling mode' for both directions */
+ writeb(0xf, base + UINTM);
+#endif
#ifdef CONFIG_DRIVER_SERIAL_S3C_AUTOSYNC
writeb(0x10, base + UMCON); /* enable auto flow control */
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
2012-05-13 12:39 ` [PATCH 1/9] Support most Samsung SoCs in S3C serial driver Alexey Galakhov
@ 2012-05-13 12:39 ` Alexey Galakhov
2012-05-14 8:03 ` Juergen Beisert
2012-05-14 8:12 ` Sascha Hauer
2012-05-13 12:40 ` [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only) Alexey Galakhov
` (6 subsequent siblings)
8 siblings, 2 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:39 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/boards/a9m2410/a9m2410.c | 10 +-
arch/arm/boards/a9m2410/config.h | 2 +-
arch/arm/boards/a9m2410/lowlevel_init.S | 2 +-
arch/arm/boards/a9m2440/a9m2410dev.c | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 10 +-
arch/arm/boards/a9m2440/config.h | 2 +-
arch/arm/boards/a9m2440/lowlevel_init.S | 4 +-
arch/arm/boards/mini2440/config.h | 2 +-
arch/arm/boards/mini2440/lowlevel_init.S | 2 +-
arch/arm/boards/mini2440/mini2440.c | 10 +-
arch/arm/configs/a9m2410_defconfig | 2 +-
arch/arm/configs/a9m2440_defconfig | 4 +-
arch/arm/configs/mini2440_defconfig | 2 +-
arch/arm/mach-samsung/Kconfig | 30 +-
arch/arm/mach-samsung/Makefile | 5 +-
arch/arm/mach-samsung/clocks-s3c24x0.c | 157 ++++++++++
arch/arm/mach-samsung/generic.c | 112 -------
arch/arm/mach-samsung/gpio-s3c24x0.c | 2 +-
.../arm/mach-samsung/include/mach/clocks-s3c24x0.h | 24 ++
arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h | 77 +++++
arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h | 69 +++++
arch/arm/mach-samsung/include/mach/nand-s3c24x0.h | 54 ++++
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 22 +-
arch/arm/mach-samsung/include/mach/s3c-generic.h | 4 +-
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 53 +---
arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h | 77 -----
arch/arm/mach-samsung/include/mach/s3c24xx-nand.h | 54 ----
arch/arm/mach-samsung/lowlevel-init.S | 317 --------------------
arch/arm/mach-samsung/lowlevel-s3c24x0.S | 317 ++++++++++++++++++++
arch/arm/mach-samsung/mem-s3c24x0.c | 143 +++++++++
arch/arm/mach-samsung/s3c24xx-clocks.c | 157 ----------
drivers/mtd/nand/nand_s3c24xx.c | 16 +-
drivers/serial/Kconfig | 2 +-
33 files changed, 913 insertions(+), 833 deletions(-)
create mode 100644 arch/arm/mach-samsung/clocks-s3c24x0.c
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h
create mode 100644 arch/arm/mach-samsung/include/mach/nand-s3c24x0.h
delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h
delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
delete mode 100644 arch/arm/mach-samsung/lowlevel-init.S
create mode 100644 arch/arm/mach-samsung/lowlevel-s3c24x0.S
create mode 100644 arch/arm/mach-samsung/mem-s3c24x0.c
delete mode 100644 arch/arm/mach-samsung/s3c24xx-clocks.c
diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index 1a3181e..e416c8e 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -33,10 +33,10 @@
#include <nand.h>
#include <io.h>
#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-nand.h>
+#include <mach/nand-s3c24x0.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
// {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
static struct s3c24x0_nand_platform_data nand_info = {
@@ -51,7 +51,7 @@ static int a9m2410_mem_init(void)
* Note: On this card the second SDRAM page is not used
*/
s3c24xx_disable_second_sdram_bank();
- size = s3c24xx_get_memory_size();
+ size = s3c_get_memory_size();
/* ---------- configure the GPIOs ------------- */
writel(0x007FFFFF, S3C_GPACON);
@@ -136,10 +136,10 @@ static int a9m2410_devices_init(void)
device_initcall(a9m2410_devices_init);
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
void __bare_init nand_boot(void)
{
- s3c24x0_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
+ s3c_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
}
#endif
diff --git a/arch/arm/boards/a9m2410/config.h b/arch/arm/boards/a9m2410/config.h
index 87b05fc..4b8a9a2 100644
--- a/arch/arm/boards/a9m2410/config.h
+++ b/arch/arm/boards/a9m2410/config.h
@@ -115,7 +115,7 @@
#define A9M2410_TWRPH1 1
/* needed in the generic NAND boot code only */
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
# define BOARD_DEFAULT_NAND_TIMING CALC_NFCONF_TIMING(A9M2410_TACLS, A9M2410_TWRPH0, A9M2410_TWRPH1)
#endif
diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S
index a106d53..0463b26 100644
--- a/arch/arm/boards/a9m2410/lowlevel_init.S
+++ b/arch/arm/boards/a9m2410/lowlevel_init.S
@@ -28,7 +28,7 @@ board_init_lowlevel:
bl s3c24x0_sdram_init
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
mov lr, r10 /* restore the link register */
/* up to here we are running from the internal SRAM area */
b s3c24x0_nand_boot /* does return directly to our caller into SDRAM */
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
index bedb0f7..f23fc5d 100644
--- a/arch/arm/boards/a9m2440/a9m2410dev.c
+++ b/arch/arm/boards/a9m2440/a9m2410dev.c
@@ -30,7 +30,7 @@
#include <io.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
/**
* Initialize the CPU to be able to work with the a9m2410dev evaluation board
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 4094e31..0bb7298 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -33,10 +33,10 @@
#include <nand.h>
#include <io.h>
#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-nand.h>
+#include <mach/nand-s3c24x0.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
#include "baseboards.h"
@@ -99,7 +99,7 @@ static int a9m2440_mem_init(void)
break;
}
- arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c_get_memory_size());
return 0;
}
@@ -155,10 +155,10 @@ static int a9m2440_devices_init(void)
device_initcall(a9m2440_devices_init);
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
void __bare_init nand_boot(void)
{
- s3c24x0_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
+ s3c_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
}
#endif
diff --git a/arch/arm/boards/a9m2440/config.h b/arch/arm/boards/a9m2440/config.h
index 43cb6ab..09ad949 100644
--- a/arch/arm/boards/a9m2440/config.h
+++ b/arch/arm/boards/a9m2440/config.h
@@ -66,7 +66,7 @@
#define A9M2440_TWRPH1 1
/* needed in the generic NAND boot code only */
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
# define BOARD_DEFAULT_NAND_TIMING CALC_NFCONF_TIMING(A9M2440_TACLS, A9M2440_TWRPH0, A9M2440_TWRPH1)
#endif
diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
index e915a16..f6522f4 100644
--- a/arch/arm/boards/a9m2440/lowlevel_init.S
+++ b/arch/arm/boards/a9m2440/lowlevel_init.S
@@ -4,7 +4,7 @@
#include <config.h>
#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
.section ".text_bare_init.board_init_lowlevel","ax"
@@ -232,7 +232,7 @@ board_init_lowlevel:
bl sdram_init
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
mov lr, r10 /* restore the link register */
/* up to here we are running from the internal SRAM area */
b s3c24x0_nand_boot /* does return directly to our caller into SDRAM */
diff --git a/arch/arm/boards/mini2440/config.h b/arch/arm/boards/mini2440/config.h
index 8d36193..674d974 100644
--- a/arch/arm/boards/mini2440/config.h
+++ b/arch/arm/boards/mini2440/config.h
@@ -66,7 +66,7 @@
#define MINI2440_TWRPH1 1
/* needed in the generic NAND boot code only */
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
# define BOARD_DEFAULT_NAND_TIMING \
CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0, MINI2440_TWRPH1)
#endif
diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S
index 1c8860a..827cf00 100644
--- a/arch/arm/boards/mini2440/lowlevel_init.S
+++ b/arch/arm/boards/mini2440/lowlevel_init.S
@@ -30,7 +30,7 @@ board_init_lowlevel:
bl s3c24x0_sdram_init
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
mov lr, r10 /* restore the link register */
/* up to here we are running from the internal SRAM area */
b s3c24x0_nand_boot /* does return directly to our caller into SDRAM */
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 361a3e2..d5edd55 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -39,12 +39,12 @@
#include <io.h>
#include <mach/gpio.h>
#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-nand.h>
+#include <mach/nand-s3c24x0.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-mci.h>
#include <mach/s3c24xx-fb.h>
#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
static struct s3c24x0_nand_platform_data nand_info = {
.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
@@ -268,7 +268,7 @@ static const unsigned pin_usage[] = {
static int mini2440_mem_init(void)
{
- arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c_get_memory_size());
return 0;
}
@@ -326,10 +326,10 @@ static int mini2440_devices_init(void)
device_initcall(mini2440_devices_init);
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
void __bare_init nand_boot(void)
{
- s3c24x0_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
+ s3c_nand_load_image((void *)TEXT_BASE, 256 * 1024, 0);
}
#endif
diff --git a/arch/arm/configs/a9m2410_defconfig b/arch/arm/configs/a9m2410_defconfig
index 57e73c7..1955023 100644
--- a/arch/arm/configs/a9m2410_defconfig
+++ b/arch/arm/configs/a9m2410_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARCH_S3C24xx=y
-CONFIG_S3C24XX_NAND_BOOT=y
+CONFIG_S3C_NAND_BOOT=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_BROKEN=y
CONFIG_EXPERIMENTAL=y
diff --git a/arch/arm/configs/a9m2440_defconfig b/arch/arm/configs/a9m2440_defconfig
index ae7f523..ebdf64f 100644
--- a/arch/arm/configs/a9m2440_defconfig
+++ b/arch/arm/configs/a9m2440_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARCH_S3C24xx=y
CONFIG_MACH_A9M2440=y
-CONFIG_S3C24XX_SDRAM_INIT=y
-CONFIG_S3C24XX_NAND_BOOT=y
+CONFIG_S3C_SDRAM_INIT=y
+CONFIG_S3C_NAND_BOOT=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_BROKEN=y
CONFIG_EXPERIMENTAL=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 9b35dd5..efe76e4 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARCH_S3C24xx=y
CONFIG_MACH_MINI2440=y
CONFIG_MINI2440_VIDEO_N35=y
-CONFIG_S3C24XX_NAND_BOOT=y
+CONFIG_S3C_NAND_BOOT=y
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_TEXT_BASE=0x33e00000
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index bc283dc..4d5f7c5 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -30,8 +30,8 @@ config MACH_A9M2410
bool "Digi A9M2410"
select CPU_S3C2410
select MACH_HAS_LOWLEVEL_INIT
- select S3C24XX_PLL_INIT
- select S3C24XX_SDRAM_INIT
+ select S3C_PLL_INIT
+ select S3C_SDRAM_INIT
help
Say Y here if you are using Digi's Connect Core 9M equipped
with a Samsung S3C2410 Processor
@@ -40,7 +40,7 @@ config MACH_A9M2440
bool "Digi A9M2440"
select CPU_S3C2440
select MACH_HAS_LOWLEVEL_INIT
- select S3C24XX_PLL_INIT
+ select S3C_PLL_INIT
help
Say Y here if you are using Digi's Connect Core 9M equipped
with a Samsung S3C2440 Processor
@@ -50,8 +50,8 @@ config MACH_MINI2440
select CPU_S3C2440
select MACH_HAS_LOWLEVEL_INIT
select MACH_DO_LOWLEVEL_INIT
- select S3C24XX_PLL_INIT
- select S3C24XX_SDRAM_INIT
+ select S3C_PLL_INIT
+ select S3C_SDRAM_INIT
select HAS_DM9000
help
Say Y here if you are using Mini 2440 dev board equipped
@@ -78,34 +78,36 @@ source arch/arm/boards/mini2440/Kconfig
endmenu
-menu "S3C24X0 Features "
+endif
+
+menu "S3C Features "
-config S3C24XX_LOW_LEVEL_INIT
+config S3C_LOWLEVEL_INIT
bool
-config S3C24XX_PLL_INIT
+config S3C_PLL_INIT
bool
prompt "Reconfigure PLL"
- select S3C24XX_LOW_LEVEL_INIT
+ select S3C_LOWLEVEL_INIT
help
This adds generic code to reconfigure the internal PLL very early
after reset.
-config S3C24XX_SDRAM_INIT
+config S3C_SDRAM_INIT
bool
prompt "Initialize SDRAM"
- select S3C24XX_LOW_LEVEL_INIT
+ select S3C_LOWLEVEL_INIT
help
This adds generic code to configure the SDRAM controller after reset.
The initialisation will be skipped if the code is already running
from SDRAM.
-config S3C24XX_NAND_BOOT
+config S3C_NAND_BOOT
bool
prompt "Booting from NAND"
select MTD
select NAND
- select NAND_S3C24XX
+ select NAND_S3C
help
Add generic support to boot from NAND flash. Image loading will be
skipped if the code is running from NOR or already from SDRAM.
@@ -113,5 +115,3 @@ config S3C24XX_NAND_BOOT
endmenu
endif
-
-endif
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 2ba5c3f..8f032fb 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,3 +1,4 @@
obj-y += s3c-timer.o generic.o
-obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o s3c24xx-clocks.o
-obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
+obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
+obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
+obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/clocks-s3c24x0.c b/arch/arm/mach-samsung/clocks-s3c24x0.c
new file mode 100644
index 0000000..38d8b75
--- /dev/null
+++ b/arch/arm/mach-samsung/clocks-s3c24x0.c
@@ -0,0 +1,157 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-clocks.h>
+#include <mach/s3c-busctl.h>
+
+/**
+ * Calculate the current M-PLL clock.
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_mpllclk(void)
+{
+ uint32_t m, p, s, reg_val;
+
+ reg_val = readl(S3C_MPLLCON);
+ m = ((reg_val & 0xFF000) >> 12) + 8;
+ p = ((reg_val & 0x003F0) >> 4) + 2;
+ s = reg_val & 0x3;
+#ifdef CONFIG_CPU_S3C2410
+ return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
+#endif
+#ifdef CONFIG_CPU_S3C2440
+ return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s));
+#endif
+}
+
+/**
+ * Calculate the current U-PLL clock
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_upllclk(void)
+{
+ uint32_t m, p, s, reg_val;
+
+ reg_val = readl(S3C_UPLLCON);
+ m = ((reg_val & 0xFF000) >> 12) + 8;
+ p = ((reg_val & 0x003F0) >> 4) + 2;
+ s = reg_val & 0x3;
+
+ return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
+}
+
+/**
+ * Calculate the FCLK frequency used for the ARM CPU core
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_fclk(void)
+{
+ return s3c_get_mpllclk();
+}
+
+/**
+ * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral)
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_hclk(void)
+{
+ uint32_t f_clk;
+
+ f_clk = s3c_get_fclk();
+#ifdef CONFIG_CPU_S3C2410
+ if (readl(S3C_CLKDIVN) & 0x02)
+ return f_clk >> 1;
+#endif
+#ifdef CONFIG_CPU_S3C2440
+ switch(readl(S3C_CLKDIVN) & 0x06) {
+ case 2:
+ return f_clk >> 1;
+ case 4:
+ return f_clk >> 2; /* TODO consider CAMDIVN */
+ case 6:
+ return f_clk / 3; /* TODO consider CAMDIVN */
+ }
+#endif
+ return f_clk;
+}
+
+/**
+ * Calculate the PCLK frequency used for the slower peripherals
+ * @return Current frequency in Hz
+ */
+uint32_t s3c_get_pclk(void)
+{
+ uint32_t p_clk;
+
+ p_clk = s3c_get_hclk();
+ if (readl(S3C_CLKDIVN) & 0x01)
+ return p_clk >> 1;
+ return p_clk;
+}
+
+/**
+ * Calculate the UCLK frequency used by the USB host device
+ * @return Current frequency in Hz
+ */
+uint32_t s3c24_get_uclk(void)
+{
+ return s3c_get_upllclk();
+}
+
+/**
+ * Return correct UART frequency based on the UCON register
+ */
+unsigned s3c_get_uart_clk(unsigned src)
+{
+ switch (src & 3) {
+ case 0:
+ case 2:
+ return s3c_get_pclk();
+ case 1:
+ return 0; /* TODO UEXTCLK */
+ case 3:
+ return 0; /* TODO FCLK/n */
+ }
+ return 0; /* not reached, to make compiler happy */
+}
+
+/**
+ * Show the user the current clock settings
+ */
+int s3c24xx_dump_clocks(void)
+{
+ printf("refclk: %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000);
+ printf("mpll: %7d kHz\n", s3c_get_mpllclk() / 1000);
+ printf("upll: %7d kHz\n", s3c_get_upllclk() / 1000);
+ printf("fclk: %7d kHz\n", s3c_get_fclk() / 1000);
+ printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000);
+ printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000);
+ printf("SDRAM1: CL%d@%dMHz\n", ((readl(S3C_BANKCON6) & 0xc) >> 2) + 2,
+ s3c_get_hclk() / 1000000);
+ if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+ printf("SDRAM2: CL%d@%dMHz\n",
+ ((readl(S3C_BANKCON7) & 0xc) >> 2) + 2,
+ s3c_get_hclk() / 1000000);
+ return 0;
+}
+
+late_initcall(s3c24xx_dump_clocks);
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 7706be2..f919e24 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -25,65 +25,10 @@
#include <config.h>
#include <common.h>
#include <init.h>
-#include <clock.h>
#include <io.h>
-#include <sizes.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-generic.h>
-#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
-/**
- * Calculate the amount of connected and available memory
- * @return Memory size in bytes
- */
-uint32_t s3c24xx_get_memory_size(void)
-{
- uint32_t reg, size;
-
- /*
- * detect the current memory size
- */
- reg = readl(S3C_BANKSIZE);
-
- switch (reg & 0x7) {
- case 0:
- size = SZ_32M;
- break;
- case 1:
- size = SZ_64M;
- break;
- case 2:
- size = SZ_128M;
- break;
- case 4:
- size = SZ_2M;
- break;
- case 5:
- size = SZ_4M;
- break;
- case 6:
- size = SZ_8M;
- break;
- default:
- size = SZ_16M;
- break;
- }
-
- /*
- * Is bank7 also configured for SDRAM usage?
- */
- if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
- size <<= 1; /* also count this bank */
-
- return size;
-}
-
-void s3c24xx_disable_second_sdram_bank(void)
-{
- writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7);
- writel(readl(S3C_MISCCR) | (1 << 18), S3C_MISCCR); /* disable its clock */
-}
#define S3C_WTCON (S3C_WATCHDOG_BASE)
#define S3C_WTDAT (S3C_WATCHDOG_BASE + 0x04)
@@ -105,60 +50,3 @@ void __noreturn reset_cpu(unsigned long addr)
;
}
EXPORT_SYMBOL(reset_cpu);
-
-/**
-
-@page dev_s3c24xx_arch Samsung's S3C24xx Platforms in barebox
-
-@section s3c24xx_boards Boards using S3C24xx Processors
-
-@li @subpage arch/arm/boards/a9m2410/a9m2410.c
-@li @subpage arch/arm/boards/a9m2440/a9m2440.c
-
-@section s3c24xx_arch Documentation for S3C24xx Architectures Files
-
-@li @subpage arch/arm/mach-s3c24xx/generic.c
-
-@section s3c24xx_mem_map SDRAM Memory Map
-
-SDRAM starts at address 0x3000.0000 up to the available amount of connected
-SDRAM memory. Physically this CPU can handle up to 256MiB (two areas with
-up to 128MiB each).
-
-@subsection s3c24xx_mem_generic_map Generic Map
-- 0x0000.0000 Start of the internal SRAM when booting from NAND flash memory or CS signal to a NOR flash memory.
-- 0x0800.0000 Start of I/O space.
-- 0x3000.0000 Start of SDRAM area.
- - 0x3000.0100 Start of the TAG list area.
- - 0x3000.8000 Start of the linux kernel (physical address).
-- 0x4000.0000 Start of internal SRAM, when booting from NOR flash memory
-- 0x4800.0000 Start of the internal I/O area
-
-@section s3c24xx_asm_arm include/asm-arm/arch-s3c24xx directory guidelines
-All S3C24xx common headers are located here.
-
-@note Do not add board specific header files/information here.
-*/
-
-/** @page dev_s3c24xx_mach Samsung's S3C24xx based platforms
-
-@par barebox Map
-
-The location of the @a barebox itself depends on the available amount of
-installed SDRAM memory:
-
-- 0x30fc.0000 Start of @a barebox when 16MiB SDRAM is available
-- 0x31fc.0000 Start of @a barebox when 32MiB SDRAM is available
-- 0x33fc.0000 Start of @a barebox when 64MiB SDRAM is available
-
-Adjust the @p CONFIG_TEXT_BASE/CONFIG_ARCH_TEXT_BASE symbol in accordance to
-the available memory.
-
-@note The RAM based filesystem and the stack resides always below the
-@a barebox start address.
-
-@li @subpage dev_s3c24xx_wd_handling
-@li @subpage dev_s3c24xx_pll_handling
-@li @subpage dev_s3c24xx_sdram_handling
-@li @subpage dev_s3c24xx_nandboot_handling
-*/
diff --git a/arch/arm/mach-samsung/gpio-s3c24x0.c b/arch/arm/mach-samsung/gpio-s3c24x0.c
index 4f1c5cc..baeaf4f 100644
--- a/arch/arm/mach-samsung/gpio-s3c24x0.c
+++ b/arch/arm/mach-samsung/gpio-s3c24x0.c
@@ -20,7 +20,7 @@
#include <io.h>
#include <mach/s3c-iomap.h>
#include <mach/gpio.h>
-#include <mach/s3c24xx-gpio.h>
+#include <mach/gpio-s3c24x0.h>
static const unsigned char group_offset[] =
{
diff --git a/arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h b/arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h
new file mode 100644
index 0000000..839dfe3
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/clocks-s3c24x0.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+# define S3C_LOCKTIME (S3C_CLOCK_POWER_BASE)
+# define S3C_MPLLCON (S3C_CLOCK_POWER_BASE + 0x4)
+# define S3C_UPLLCON (S3C_CLOCK_POWER_BASE + 0x8)
+# define S3C_CLKCON (S3C_CLOCK_POWER_BASE + 0xc)
+# define S3C_CLKSLOW (S3C_CLOCK_POWER_BASE + 0x10)
+# define S3C_CLKDIVN (S3C_CLOCK_POWER_BASE + 0x14)
+
+# define S3C_MPLLCON_GET_MDIV(x) ((((x) >> 12) & 0xff) + 8)
+# define S3C_MPLLCON_GET_PDIV(x) ((((x) >> 4) & 0x3f) + 2)
+# define S3C_MPLLCON_GET_SDIV(x) ((x) & 0x3)
diff --git a/arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h b/arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h
new file mode 100644
index 0000000..ffb57fb
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_S3C24X0_H
+# define __MACH_GPIO_S3C24X0_H
+
+#define S3C_GPACON (S3C_GPIO_BASE)
+#define S3C_GPADAT (S3C_GPIO_BASE + 0x04)
+
+#define S3C_GPBCON (S3C_GPIO_BASE + 0x10)
+#define S3C_GPBDAT (S3C_GPIO_BASE + 0x14)
+#define S3C_GPBUP (S3C_GPIO_BASE + 0x18)
+
+#define S3C_GPCCON (S3C_GPIO_BASE + 0x20)
+#define S3C_GPCDAT (S3C_GPIO_BASE + 0x24)
+#define S3C_GPCUP (S3C_GPIO_BASE + 0x28)
+
+#define S3C_GPDCON (S3C_GPIO_BASE + 0x30)
+#define S3C_GPDDAT (S3C_GPIO_BASE + 0x34)
+#define S3C_GPDUP (S3C_GPIO_BASE + 0x38)
+
+#define S3C_GPECON (S3C_GPIO_BASE + 0x40)
+#define S3C_GPEDAT (S3C_GPIO_BASE + 0x44)
+#define S3C_GPEUP (S3C_GPIO_BASE + 0x48)
+
+#define S3C_GPFCON (S3C_GPIO_BASE + 0x50)
+#define S3C_GPFDAT (S3C_GPIO_BASE + 0x54)
+#define S3C_GPFUP (S3C_GPIO_BASE + 0x58)
+
+#define S3C_GPGCON (S3C_GPIO_BASE + 0x60)
+#define S3C_GPGDAT (S3C_GPIO_BASE + 0x64)
+#define S3C_GPGUP (S3C_GPIO_BASE + 0x68)
+
+#define S3C_GPHCON (S3C_GPIO_BASE + 0x70)
+#define S3C_GPHDAT (S3C_GPIO_BASE + 0x74)
+#define S3C_GPHUP (S3C_GPIO_BASE + 0x78)
+
+#ifdef CONFIG_CPU_S3C2440
+# define S3C_GPJCON (S3C_GPIO_BASE + 0xd0)
+# define S3C_GPJDAT (S3C_GPIO_BASE + 0xd4)
+# define S3C_GPJUP (S3C_GPIO_BASE + 0xd8)
+#endif
+
+#define S3C_MISCCR (S3C_GPIO_BASE + 0x80)
+#define S3C_DCLKCON (S3C_GPIO_BASE + 0x84)
+#define S3C_EXTINT0 (S3C_GPIO_BASE + 0x88)
+#define S3C_EXTINT1 (S3C_GPIO_BASE + 0x8c)
+#define S3C_EXTINT2 (S3C_GPIO_BASE + 0x90)
+#define S3C_EINTFLT0 (S3C_GPIO_BASE + 0x94)
+#define S3C_EINTFLT1 (S3C_GPIO_BASE + 0x98)
+#define S3C_EINTFLT2 (S3C_GPIO_BASE + 0x9c)
+#define S3C_EINTFLT3 (S3C_GPIO_BASE + 0xa0)
+#define S3C_EINTMASK (S3C_GPIO_BASE + 0xa4)
+#define S3C_EINTPEND (S3C_GPIO_BASE + 0xa8)
+#define S3C_GSTATUS0 (S3C_GPIO_BASE + 0xac)
+#define S3C_GSTATUS1 (S3C_GPIO_BASE + 0xb0)
+#define S3C_GSTATUS2 (S3C_GPIO_BASE + 0xb4)
+#define S3C_GSTATUS3 (S3C_GPIO_BASE + 0xb8)
+#define S3C_GSTATUS4 (S3C_GPIO_BASE + 0xbc)
+
+#ifdef CONFIG_CPU_S3C2440
+# define S3C_DSC0 (S3C_GPIO_BASE + 0xc4)
+# define S3C_DSC1 (S3C_GPIO_BASE + 0xc8)
+#endif
+
+#endif /* __MACH_GPIO_S3C24X0_H */
diff --git a/arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h b/arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h
new file mode 100644
index 0000000..60d44e3
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/iomap-s3c24x0.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2009 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* S3C2410 device base addresses */
+#define S3C_MEMCTL_BASE 0x48000000
+#define S3C2410_USB_HOST_BASE 0x49000000
+#define S3C2410_INTERRUPT_BASE 0x4A000000
+#define S3C2410_DMA_BASE 0x4B000000
+#define S3C_CLOCK_POWER_BASE 0x4C000000
+#define S3C2410_LCD_BASE 0x4D000000
+#define S3C24X0_NAND_BASE 0x4E000000
+#define S3C_UART_BASE 0x50000000
+#define S3C_TIMER_BASE 0x51000000
+#define S3C2410_USB_DEVICE_BASE 0x52000140
+#define S3C_WATCHDOG_BASE 0x53000000
+#define S3C2410_I2C_BASE 0x54000000
+#define S3C2410_I2S_BASE 0x55000000
+#define S3C_GPIO_BASE 0x56000000
+#define S3C2410_RTC_BASE 0x57000000
+#define S3C2410_ADC_BASE 0x58000000
+#define S3C2410_SPI_BASE 0x59000000
+#define S3C2410_SDI_BASE 0x5A000000
+
+/* external IO space */
+#define S3C_CS0_BASE 0x00000000
+#define S3C_CS1_BASE 0x08000000
+#define S3C_CS2_BASE 0x10000000
+#define S3C_CS3_BASE 0x18000000
+#define S3C_CS4_BASE 0x20000000
+#define S3C_CS5_BASE 0x28000000
+#define S3C_CS6_BASE 0x30000000
+
+#define S3C_SDRAM_BASE S3C_CS6_BASE
+#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000)
+
+/*
+ * if we are booting from NAND, its internal SRAM occures at
+ * a different address than without this feature
+ */
+#ifdef CONFIG_S3C_NAND_BOOT
+# define NFC_RAM_AREA 0x00000000
+#else
+# define NFC_RAM_AREA 0x40000000
+#endif
+#define NFC_RAM_SIZE 4096
+
+#define S3C_UART1_BASE (S3C_UART_BASE)
+#define S3C_UART1_SIZE 0x4000
+#define S3C_UART2_BASE (S3C_UART_BASE + 0x4000)
+#define S3C_UART2_SIZE 0x4000
+#define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
+#define S3C_UART3_SIZE 0x4000
diff --git a/arch/arm/mach-samsung/include/mach/nand-s3c24x0.h b/arch/arm/mach-samsung/include/mach/nand-s3c24x0.h
new file mode 100644
index 0000000..88d29d4
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/nand-s3c24x0.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2009 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifdef CONFIG_S3C_NAND_BOOT
+extern void s3c_nand_load_image(void*, int, int);
+#endif
+
+/**
+ * Locate the timing bits for the NFCONF register
+ * @param setup is the TACLS clock count
+ * @param access is the TWRPH0 clock count
+ * @param hold is the TWRPH1 clock count
+ *
+ * @note A clock count of 0 means always 1 HCLK clock.
+ * @note Clock count settings depend on the NAND flash requirements and the current HCLK speed
+ */
+#ifdef CONFIG_CPU_S3C2410
+# define CALC_NFCONF_TIMING(setup, access, hold) \
+ ((setup << 8) + (access << 4) + (hold << 0))
+#endif
+#ifdef CONFIG_CPU_S3C2440
+# define CALC_NFCONF_TIMING(setup, access, hold) \
+ ((setup << 12) + (access << 8) + (hold << 4))
+#endif
+
+/**
+ * Define platform specific data for the NAND controller and its device
+ */
+struct s3c24x0_nand_platform_data {
+ uint32_t nand_timing; /**< value for the NFCONF register (timing bits only) */
+ char flash_bbt; /**< force a flash based BBT */
+};
+
+/**
+ * @file
+ * @brief Basic declaration to use the s3c24x0 NAND driver
+ */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-clocks.h b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
index 44b2a6c..f4ca8fa 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-clocks.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -10,22 +11,19 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
*/
#ifndef __MACH_S3C_CLOCKS_H
-# define __MACH_S3C_CLOCKS_H
+#define __MACH_S3C_CLOCKS_H
#ifdef CONFIG_ARCH_S3C24xx
-# define S3C_LOCKTIME (S3C_CLOCK_POWER_BASE)
-# define S3C_MPLLCON (S3C_CLOCK_POWER_BASE + 0x4)
-# define S3C_UPLLCON (S3C_CLOCK_POWER_BASE + 0x8)
-# define S3C_CLKCON (S3C_CLOCK_POWER_BASE + 0xc)
-# define S3C_CLKSLOW (S3C_CLOCK_POWER_BASE + 0x10)
-# define S3C_CLKDIVN (S3C_CLOCK_POWER_BASE + 0x14)
-
-# define S3C_MPLLCON_GET_MDIV(x) ((((x) >> 12) & 0xff) + 8)
-# define S3C_MPLLCON_GET_PDIV(x) ((((x) >> 4) & 0x3f) + 2)
-# define S3C_MPLLCON_GET_SDIV(x) ((x) & 0x3)
+# include <mach/clocks-s3c24x0.h>
#endif
#endif /* __MACH_S3C_CLOCKS_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 5d3808e..62d2c93 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -33,6 +33,8 @@ uint32_t s3c_get_uclk(void);
unsigned s3c_get_uart_clk(unsigned src);
-uint32_t s3c24xx_get_memory_size(void);
+uint32_t s3c_get_memory_size(void);
+#ifdef CONFIG_ARCH_S3C24xx
void s3c24xx_disable_second_sdram_bank(void);
+#endif
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 9e867f8..b1305da 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2009 Juergen Beisert, Pengutronix
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -18,52 +19,6 @@
*
*/
-/* S3C2410 device base addresses */
-#define S3C_MEMCTL_BASE 0x48000000
-#define S3C2410_USB_HOST_BASE 0x49000000
-#define S3C2410_INTERRUPT_BASE 0x4A000000
-#define S3C2410_DMA_BASE 0x4B000000
-#define S3C_CLOCK_POWER_BASE 0x4C000000
-#define S3C2410_LCD_BASE 0x4D000000
-#define S3C24X0_NAND_BASE 0x4E000000
-#define S3C_UART_BASE 0x50000000
-#define S3C_TIMER_BASE 0x51000000
-#define S3C2410_USB_DEVICE_BASE 0x52000140
-#define S3C_WATCHDOG_BASE 0x53000000
-#define S3C2410_I2C_BASE 0x54000000
-#define S3C2410_I2S_BASE 0x55000000
-#define S3C_GPIO_BASE 0x56000000
-#define S3C2410_RTC_BASE 0x57000000
-#define S3C2410_ADC_BASE 0x58000000
-#define S3C2410_SPI_BASE 0x59000000
-#define S3C2410_SDI_BASE 0x5A000000
-
-/* external IO space */
-#define S3C_CS0_BASE 0x00000000
-#define S3C_CS1_BASE 0x08000000
-#define S3C_CS2_BASE 0x10000000
-#define S3C_CS3_BASE 0x18000000
-#define S3C_CS4_BASE 0x20000000
-#define S3C_CS5_BASE 0x28000000
-#define S3C_CS6_BASE 0x30000000
-
-#define S3C_SDRAM_BASE S3C_CS6_BASE
-#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000)
-
-/*
- * if we are booting from NAND, its internal SRAM occures at
- * a different address than without this feature
- */
-#ifdef CONFIG_S3C24XX_NAND_BOOT
-# define NFC_RAM_AREA 0x00000000
-#else
-# define NFC_RAM_AREA 0x40000000
+#ifdef CONFIG_ARCH_S3C24xx
+# include <mach/iomap-s3c24x0.h>
#endif
-#define NFC_RAM_SIZE 4096
-
-#define S3C_UART1_BASE (S3C_UART_BASE)
-#define S3C_UART1_SIZE 0x4000
-#define S3C_UART2_BASE (S3C_UART_BASE + 0x4000)
-#define S3C_UART2_SIZE 0x4000
-#define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
-#define S3C_UART3_SIZE 0x4000
diff --git a/arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h b/arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h
deleted file mode 100644
index c835974..0000000
--- a/arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2011 Juergen Beisert, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_S3C24XX_GPIO_H
-# define __MACH_S3C24XX_GPIO_H
-
-#define S3C_GPACON (S3C_GPIO_BASE)
-#define S3C_GPADAT (S3C_GPIO_BASE + 0x04)
-
-#define S3C_GPBCON (S3C_GPIO_BASE + 0x10)
-#define S3C_GPBDAT (S3C_GPIO_BASE + 0x14)
-#define S3C_GPBUP (S3C_GPIO_BASE + 0x18)
-
-#define S3C_GPCCON (S3C_GPIO_BASE + 0x20)
-#define S3C_GPCDAT (S3C_GPIO_BASE + 0x24)
-#define S3C_GPCUP (S3C_GPIO_BASE + 0x28)
-
-#define S3C_GPDCON (S3C_GPIO_BASE + 0x30)
-#define S3C_GPDDAT (S3C_GPIO_BASE + 0x34)
-#define S3C_GPDUP (S3C_GPIO_BASE + 0x38)
-
-#define S3C_GPECON (S3C_GPIO_BASE + 0x40)
-#define S3C_GPEDAT (S3C_GPIO_BASE + 0x44)
-#define S3C_GPEUP (S3C_GPIO_BASE + 0x48)
-
-#define S3C_GPFCON (S3C_GPIO_BASE + 0x50)
-#define S3C_GPFDAT (S3C_GPIO_BASE + 0x54)
-#define S3C_GPFUP (S3C_GPIO_BASE + 0x58)
-
-#define S3C_GPGCON (S3C_GPIO_BASE + 0x60)
-#define S3C_GPGDAT (S3C_GPIO_BASE + 0x64)
-#define S3C_GPGUP (S3C_GPIO_BASE + 0x68)
-
-#define S3C_GPHCON (S3C_GPIO_BASE + 0x70)
-#define S3C_GPHDAT (S3C_GPIO_BASE + 0x74)
-#define S3C_GPHUP (S3C_GPIO_BASE + 0x78)
-
-#ifdef CONFIG_CPU_S3C2440
-# define S3C_GPJCON (S3C_GPIO_BASE + 0xd0)
-# define S3C_GPJDAT (S3C_GPIO_BASE + 0xd4)
-# define S3C_GPJUP (S3C_GPIO_BASE + 0xd8)
-#endif
-
-#define S3C_MISCCR (S3C_GPIO_BASE + 0x80)
-#define S3C_DCLKCON (S3C_GPIO_BASE + 0x84)
-#define S3C_EXTINT0 (S3C_GPIO_BASE + 0x88)
-#define S3C_EXTINT1 (S3C_GPIO_BASE + 0x8c)
-#define S3C_EXTINT2 (S3C_GPIO_BASE + 0x90)
-#define S3C_EINTFLT0 (S3C_GPIO_BASE + 0x94)
-#define S3C_EINTFLT1 (S3C_GPIO_BASE + 0x98)
-#define S3C_EINTFLT2 (S3C_GPIO_BASE + 0x9c)
-#define S3C_EINTFLT3 (S3C_GPIO_BASE + 0xa0)
-#define S3C_EINTMASK (S3C_GPIO_BASE + 0xa4)
-#define S3C_EINTPEND (S3C_GPIO_BASE + 0xa8)
-#define S3C_GSTATUS0 (S3C_GPIO_BASE + 0xac)
-#define S3C_GSTATUS1 (S3C_GPIO_BASE + 0xb0)
-#define S3C_GSTATUS2 (S3C_GPIO_BASE + 0xb4)
-#define S3C_GSTATUS3 (S3C_GPIO_BASE + 0xb8)
-#define S3C_GSTATUS4 (S3C_GPIO_BASE + 0xbc)
-
-#ifdef CONFIG_CPU_S3C2440
-# define S3C_DSC0 (S3C_GPIO_BASE + 0xc4)
-# define S3C_DSC1 (S3C_GPIO_BASE + 0xc8)
-#endif
-
-#endif /* __MACH_S3C24XX_GPIO_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c24xx-nand.h b/arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
deleted file mode 100644
index 7610b4e..0000000
--- a/arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2009 Juergen Beisert, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifdef CONFIG_S3C24XX_NAND_BOOT
-extern void s3c24x0_nand_load_image(void*, int, int);
-#endif
-
-/**
- * Locate the timing bits for the NFCONF register
- * @param setup is the TACLS clock count
- * @param access is the TWRPH0 clock count
- * @param hold is the TWRPH1 clock count
- *
- * @note A clock count of 0 means always 1 HCLK clock.
- * @note Clock count settings depend on the NAND flash requirements and the current HCLK speed
- */
-#ifdef CONFIG_CPU_S3C2410
-# define CALC_NFCONF_TIMING(setup, access, hold) \
- ((setup << 8) + (access << 4) + (hold << 0))
-#endif
-#ifdef CONFIG_CPU_S3C2440
-# define CALC_NFCONF_TIMING(setup, access, hold) \
- ((setup << 12) + (access << 8) + (hold << 4))
-#endif
-
-/**
- * Define platform specific data for the NAND controller and its device
- */
-struct s3c24x0_nand_platform_data {
- uint32_t nand_timing; /**< value for the NFCONF register (timing bits only) */
- char flash_bbt; /**< force a flash based BBT */
-};
-
-/**
- * @file
- * @brief Basic declaration to use the s3c24x0 NAND driver
- */
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
deleted file mode 100644
index 31c6196..0000000
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * (C) Copyright 2009
- * Juergen Beisert <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mach/s3c-iomap.h>
-
- .section ".text_bare_init.s3c24x0_disable_wd","ax"
-
-/*
- * Disable the watchdog, else it continues to bark
- */
-.globl s3c24x0_disable_wd
-s3c24x0_disable_wd:
-
- ldr r0, =S3C_WATCHDOG_BASE
- mov r1, #0x0
- str r1, [r0]
- mov pc, lr
-
-/**
-@page dev_s3c24xx_wd_handling Watchdog handling
-
-The watchdog must be disabled very early, because if it resets the system
-it is still active and will continue to reset the system. So, call this
-routine very early in your board_init_lowlevel routine.
-*/
-
-/*
- * S3C2410 PLL configuration
- * -------------------------
- *
- * Basic frequency calculation
- *
- * m * REFclk s = SDIV
- * PLLclk = ------------ p = PDIV + 2
- * p * 2^s m = MDIV + 8
- *
- * After reset the PLL of the s3c2410 processor uses:
- *
- * MPLL UPLL
- * MDIV 0x5c 0x28
- * PDIV 0x08 0x08
- * SDIV 0x0 0x0
- *
- * 100 * 12MHz 1200MHz
- * MPLLclk = ------------- = -------- = 120MHz
- * 10 * 2^0 10
- *
- * 48 * 12MHz 576MHz
- * UPLLclk = ------------- = -------- = 57,6MHz
- * 10 * 2^0 10
- *
- * Note: Do not use "r10" here in this code
- */
-
-#ifdef CONFIG_S3C24XX_PLL_INIT
-
- .section ".text_bare_init.s3c24x0_pll_init","ax"
-
-.globl s3c24x0_pll_init
-s3c24x0_pll_init:
-
- mov r0, #S3C_CLOCK_POWER_BASE
-
- /* configure internal clock ratio */
- mov r1, #BOARD_SPECIFIC_CLKDIVN
- str r1, [r0, #20]
-
- /* enable all devices on this chip */
- mov r1, #0xFFFFFFF0
- str r1, [r0, #12]
-
- /* ??????? */
-#ifdef CONFIG_CPU_S3C2440
- mov r1, #0xFFFFFFFF
-#endif
-#ifdef CONFIG_CPU_S3C2410
- mov r1, #0x00FFFFFF
-#endif
- str r1, [r0, #0]
-
-#ifdef CONFIG_CPU_S3C2440
- /*
- * Most of the time HDIVN is not 0, so we must use the
- * asynchronous bus mode (refer datasheet "Clock and Power Management")
- */
- mrc p15, 0, r1, c1, c0, 0
- orr r1, r1, #0xc0000000
- mcr p15, 0, r1, c1, c0, 0
-#endif
-
- /* configure UPLL */
- ldr r1, =BOARD_SPECIFIC_UPLL
- str r1, [r0, #8]
-
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- /* configure MPLL */
- ldr r1, =BOARD_SPECIFIC_MPLL
- str r1, [r0, #4]
-
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- mov pc, lr
-
-#endif
-
-/**
-@page dev_s3c24xx_pll_handling PLL clock handling
-
-To control the speed of your machine the PLLs must be reconfigured after reset.
-
-For example the S3C2410 CPU wakes up after reset at 120MHz main PLL speed,
-shared with all other system on chip components. Most of the time this
-configuration is to slow for the CPU and to fast for the other components.
-
-PLL reprogramming can be done in the machine specific manner very early when
-the CONFIG_S3C24XX_PLL_INIT and CONFIG_MACH_HAS_LOWLEVEL_INIT symbols are
-defined. The board must provide a board_init_lowlevel() assembler function in
-this case and calling the s3c24x0_pll_init() assembler function.
-
-If the s3c24x0_pll_init() is called a few further symbols must be defined to
-setup the correct values for the machine.
-
-Define in the machine specific config.h the following symbols:
-
-- S3C24XX_CLOCK_REFERENCE with the frequency in Hz of your reference crystal.
-- BOARD_SPECIFIC_CLKDIVN with the value for the main clock ratio register (CLKDIVN)
-- BOARD_SPECIFIC_MPLL with the value for the main PLL setup register
-- BOARD_SPECIFIC_UPLL with the value for the USB PLL setup register
-
-@note Valid values for the PLL settings can be found in the CPU manual.
-
-@par Background: PLL frequency calculation for the S3C2410 CPU (both PLLs) and S3C2440 (UPLL only)
-
-@f[
- f_{PLL} = \frac{m * f_{Ref}}{p * 2^s}
-@f]
-
-With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
-
-@par Background: PLL frequency calculation for the S3C2440 CPU (MPLL only)
-
-@f[
- f_{PLL} = \frac{2 * m * f_{Ref}}{p * 2^s}
-@f]
-
-With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
-
-@note This routine can be used for the S3C2410 and the S3C2440 CPU.
-
-*/
-
-/* ----------------------------------------------------------------------- */
-
-#ifdef CONFIG_S3C24XX_SDRAM_INIT
-
- .section ".text_bare_init.s3c24x0_sdram_init","ax"
-
- .globl s3c24x0_sdram_init
-s3c24x0_sdram_init:
-
- adr r0, SDRAMDATA /* get the current relative address of the table */
- mov r1, #S3C_MEMCTL_BASE
- mov r2, #6 /* we *know* it contains 6 entries */
-
- ldr r3, [r0], #4 /* write BSWCON first */
- str r3, [r1], #0x1c /* post add register offset for bank6 */
-/*
- * Initializing the SDRAM controller is very simple:
- * Just write some useful values into the SDRAM controller.
- */
-0: ldr r3, [r0], #4
- str r3, [r1], #4
- subs r2, r2, #1
- bne 0b
-
- mov pc, lr
-
-SDRAMDATA:
- .word BOARD_SPECIFIC_BWSCON
- .word BOARD_SPECIFIC_BANKCON6
- .word BOARD_SPECIFIC_BANKCON7
- .word BOARD_SPECIFIC_REFRESH
- .word BOARD_SPECIFIC_BANKSIZE
- .word BOARD_SPECIFIC_MRSRB6
- .word BOARD_SPECIFIC_MRSRB7
-
-#endif
-
-/**
-@page dev_s3c24xx_sdram_handling SDRAM controller initialisation
-
-The SDRAM controller is very simple and its initialisation requires only a
-few steps. barebox provides a generic routine to do this step.
-
-Enable CONFIG_S3C24XX_SDRAM_INIT and CONFIG_MACH_HAS_LOWLEVEL_INIT to be able
-to call the generic s3c24x0_sdram_init() assembler function from within the
-machine specific board_init_lowlevel() assembler function.
-
-To use the s3c24x0_sdram_init() assembler function a few symbols must be
-defined to setup correct values for the machine.
-
-Define in the machine specific config.h the following list of symbols:
-
-- BOARD_SPECIFIC_BWSCON with the values for SDRAM banks 6 and 7
-- BOARD_SPECIFIC_BANKCON6 with the value for the BANKCON6 register
-- BOARD_SPECIFIC_BANKCON7 with the value for the BANKCON7 register
-- BOARD_SPECIFIC_REFRESH with the value for the REFRESH register
-- BOARD_SPECIFIC_BANKSIZE with the value for the BANKSIZE register
-- BOARD_SPECIFIC_MRSRB6 with the value for the MRSRB6 register
-- BOARD_SPECIFIC_MRSRB7 with the value for the MRSRB7 register
-*/
-
-/* ----------------------------------------------------------------------- */
-
-#ifdef CONFIG_S3C24XX_NAND_BOOT
-
- .section ".text_bare_init.s3c24x0_nand_boot","ax"
-
- .globl s3c24x0_nand_boot
-s3c24x0_nand_boot:
-/*
- * In the case of NOR boot we are running from the same address space.
- * Detect this case to handle it correctly.
- */
- mov r1, #S3C_MEMCTL_BASE
- ldr r3, [r1]
- and r3, r3, #0x6
- cmp r3, #0x0 /* check for NAND case */
- beq 2f
- mov pc, lr /* NOR case: nothing to do here */
-
-2: ldr sp, =TEXT_BASE /* Setup a temporary stack in SDRAM */
-/*
- * We still run at a location we are not linked to. But lets still running
- * from the internal SRAM, this may speed up the boot
- */
- push {lr}
- bl nand_boot
- pop {lr}
-/*
- * Adjust the return address to the correct address in SDRAM
- */
- ldr r1, =TEXT_BASE
- add lr, lr, r1
-
- mov pc, lr
-
-#endif
-
-/**
-@page dev_s3c24xx_nandboot_handling Booting from NAND
-
-To be able to boot from NAND memory only, enable the S3C24x0 NAND driver. Also
-enable CONFIG_S3C24XX_NAND_BOOT and CONFIG_MACH_HAS_LOWLEVEL_INIT to be
-able to call the s3c24x0_nand_boot() assembler routine from within the
-machine specific board_init_lowlevel() assembler function.
-
-@note This routine assumes an already working SDRAM controller and
-an initialized stack pointer.
-
-@note Basicly this routine runs from inside the internal SRAM. After load of
-the whole barebox image from the NAND flash memory into the SDRAM it adjusts
-the link register to the final SDRAM adress and returns.
-
-@note In the NAND boot mode, ECC is not checked. So, the first x KBytes used
-by barebox should have no bit error.
-
-Due to the fact the code to load the whole barebox from NAND must fit into
-the first 4kiB of the barebox image, the shrinked NAND driver is very
-minimalistic. Setup the NAND access timing is done in a safe manner, what
-means: Slowest possible values are used. If you want to increase the speed you
-should define the BOARD_DEFAULT_NAND_TIMING to a valid setting into the
-NFCONF register and add it to your board specific config.h. Refer S3C24x0's
-datasheet for further details. The macro #CALC_NFCONF_TIMING could help to
-calculate the register setting in a hardware independent manner.
-
-@note The regular NAND driver uses a platform data structure to define the
-NAND access timings.
-
-@note Its still possible to boot this image from NOR memory. If this routine
-detects it is running from NOR instead of the internal SRAM it skips any
-loading and returns immediately.
-
-*/
diff --git a/arch/arm/mach-samsung/lowlevel-s3c24x0.S b/arch/arm/mach-samsung/lowlevel-s3c24x0.S
new file mode 100644
index 0000000..e9471a5
--- /dev/null
+++ b/arch/arm/mach-samsung/lowlevel-s3c24x0.S
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2009
+ * Juergen Beisert <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <mach/s3c-iomap.h>
+
+ .section ".text_bare_init.s3c24x0_disable_wd","ax"
+
+/*
+ * Disable the watchdog, else it continues to bark
+ */
+.globl s3c24x0_disable_wd
+s3c24x0_disable_wd:
+
+ ldr r0, =S3C_WATCHDOG_BASE
+ mov r1, #0x0
+ str r1, [r0]
+ mov pc, lr
+
+/**
+@page dev_s3c24xx_wd_handling Watchdog handling
+
+The watchdog must be disabled very early, because if it resets the system
+it is still active and will continue to reset the system. So, call this
+routine very early in your board_init_lowlevel routine.
+*/
+
+/*
+ * S3C2410 PLL configuration
+ * -------------------------
+ *
+ * Basic frequency calculation
+ *
+ * m * REFclk s = SDIV
+ * PLLclk = ------------ p = PDIV + 2
+ * p * 2^s m = MDIV + 8
+ *
+ * After reset the PLL of the s3c2410 processor uses:
+ *
+ * MPLL UPLL
+ * MDIV 0x5c 0x28
+ * PDIV 0x08 0x08
+ * SDIV 0x0 0x0
+ *
+ * 100 * 12MHz 1200MHz
+ * MPLLclk = ------------- = -------- = 120MHz
+ * 10 * 2^0 10
+ *
+ * 48 * 12MHz 576MHz
+ * UPLLclk = ------------- = -------- = 57,6MHz
+ * 10 * 2^0 10
+ *
+ * Note: Do not use "r10" here in this code
+ */
+
+#ifdef CONFIG_S3C_PLL_INIT
+
+ .section ".text_bare_init.s3c24x0_pll_init","ax"
+
+.globl s3c24x0_pll_init
+s3c24x0_pll_init:
+
+ mov r0, #S3C_CLOCK_POWER_BASE
+
+ /* configure internal clock ratio */
+ mov r1, #BOARD_SPECIFIC_CLKDIVN
+ str r1, [r0, #20]
+
+ /* enable all devices on this chip */
+ mov r1, #0xFFFFFFF0
+ str r1, [r0, #12]
+
+ /* ??????? */
+#ifdef CONFIG_CPU_S3C2440
+ mov r1, #0xFFFFFFFF
+#endif
+#ifdef CONFIG_CPU_S3C2410
+ mov r1, #0x00FFFFFF
+#endif
+ str r1, [r0, #0]
+
+#ifdef CONFIG_CPU_S3C2440
+ /*
+ * Most of the time HDIVN is not 0, so we must use the
+ * asynchronous bus mode (refer datasheet "Clock and Power Management")
+ */
+ mrc p15, 0, r1, c1, c0, 0
+ orr r1, r1, #0xc0000000
+ mcr p15, 0, r1, c1, c0, 0
+#endif
+
+ /* configure UPLL */
+ ldr r1, =BOARD_SPECIFIC_UPLL
+ str r1, [r0, #8]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* configure MPLL */
+ ldr r1, =BOARD_SPECIFIC_MPLL
+ str r1, [r0, #4]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ mov pc, lr
+
+#endif
+
+/**
+@page dev_s3c24xx_pll_handling PLL clock handling
+
+To control the speed of your machine the PLLs must be reconfigured after reset.
+
+For example the S3C2410 CPU wakes up after reset at 120MHz main PLL speed,
+shared with all other system on chip components. Most of the time this
+configuration is to slow for the CPU and to fast for the other components.
+
+PLL reprogramming can be done in the machine specific manner very early when
+the CONFIG_S3C_PLL_INIT and CONFIG_MACH_HAS_LOWLEVEL_INIT symbols are
+defined. The board must provide a board_init_lowlevel() assembler function in
+this case and calling the s3c24x0_pll_init() assembler function.
+
+If the s3c24x0_pll_init() is called a few further symbols must be defined to
+setup the correct values for the machine.
+
+Define in the machine specific config.h the following symbols:
+
+- S3C24XX_CLOCK_REFERENCE with the frequency in Hz of your reference crystal.
+- BOARD_SPECIFIC_CLKDIVN with the value for the main clock ratio register (CLKDIVN)
+- BOARD_SPECIFIC_MPLL with the value for the main PLL setup register
+- BOARD_SPECIFIC_UPLL with the value for the USB PLL setup register
+
+@note Valid values for the PLL settings can be found in the CPU manual.
+
+@par Background: PLL frequency calculation for the S3C2410 CPU (both PLLs) and S3C2440 (UPLL only)
+
+@f[
+ f_{PLL} = \frac{m * f_{Ref}}{p * 2^s}
+@f]
+
+With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
+
+@par Background: PLL frequency calculation for the S3C2440 CPU (MPLL only)
+
+@f[
+ f_{PLL} = \frac{2 * m * f_{Ref}}{p * 2^s}
+@f]
+
+With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
+
+@note This routine can be used for the S3C2410 and the S3C2440 CPU.
+
+*/
+
+/* ----------------------------------------------------------------------- */
+
+#ifdef CONFIG_S3C_SDRAM_INIT
+
+ .section ".text_bare_init.s3c24x0_sdram_init","ax"
+
+ .globl s3c24x0_sdram_init
+s3c24x0_sdram_init:
+
+ adr r0, SDRAMDATA /* get the current relative address of the table */
+ mov r1, #S3C_MEMCTL_BASE
+ mov r2, #6 /* we *know* it contains 6 entries */
+
+ ldr r3, [r0], #4 /* write BSWCON first */
+ str r3, [r1], #0x1c /* post add register offset for bank6 */
+/*
+ * Initializing the SDRAM controller is very simple:
+ * Just write some useful values into the SDRAM controller.
+ */
+0: ldr r3, [r0], #4
+ str r3, [r1], #4
+ subs r2, r2, #1
+ bne 0b
+
+ mov pc, lr
+
+SDRAMDATA:
+ .word BOARD_SPECIFIC_BWSCON
+ .word BOARD_SPECIFIC_BANKCON6
+ .word BOARD_SPECIFIC_BANKCON7
+ .word BOARD_SPECIFIC_REFRESH
+ .word BOARD_SPECIFIC_BANKSIZE
+ .word BOARD_SPECIFIC_MRSRB6
+ .word BOARD_SPECIFIC_MRSRB7
+
+#endif
+
+/**
+@page dev_s3c24xx_sdram_handling SDRAM controller initialisation
+
+The SDRAM controller is very simple and its initialisation requires only a
+few steps. barebox provides a generic routine to do this step.
+
+Enable CONFIG_S3C_SDRAM_INIT and CONFIG_MACH_HAS_LOWLEVEL_INIT to be able
+to call the generic s3c24x0_sdram_init() assembler function from within the
+machine specific board_init_lowlevel() assembler function.
+
+To use the s3c24x0_sdram_init() assembler function a few symbols must be
+defined to setup correct values for the machine.
+
+Define in the machine specific config.h the following list of symbols:
+
+- BOARD_SPECIFIC_BWSCON with the values for SDRAM banks 6 and 7
+- BOARD_SPECIFIC_BANKCON6 with the value for the BANKCON6 register
+- BOARD_SPECIFIC_BANKCON7 with the value for the BANKCON7 register
+- BOARD_SPECIFIC_REFRESH with the value for the REFRESH register
+- BOARD_SPECIFIC_BANKSIZE with the value for the BANKSIZE register
+- BOARD_SPECIFIC_MRSRB6 with the value for the MRSRB6 register
+- BOARD_SPECIFIC_MRSRB7 with the value for the MRSRB7 register
+*/
+
+/* ----------------------------------------------------------------------- */
+
+#ifdef CONFIG_S3C_NAND_BOOT
+
+ .section ".text_bare_init.s3c24x0_nand_boot","ax"
+
+ .globl s3c24x0_nand_boot
+s3c24x0_nand_boot:
+/*
+ * In the case of NOR boot we are running from the same address space.
+ * Detect this case to handle it correctly.
+ */
+ mov r1, #S3C_MEMCTL_BASE
+ ldr r3, [r1]
+ and r3, r3, #0x6
+ cmp r3, #0x0 /* check for NAND case */
+ beq 2f
+ mov pc, lr /* NOR case: nothing to do here */
+
+2: ldr sp, =TEXT_BASE /* Setup a temporary stack in SDRAM */
+/*
+ * We still run at a location we are not linked to. But lets still running
+ * from the internal SRAM, this may speed up the boot
+ */
+ push {lr}
+ bl nand_boot
+ pop {lr}
+/*
+ * Adjust the return address to the correct address in SDRAM
+ */
+ ldr r1, =TEXT_BASE
+ add lr, lr, r1
+
+ mov pc, lr
+
+#endif
+
+/**
+@page dev_s3c24xx_nandboot_handling Booting from NAND
+
+To be able to boot from NAND memory only, enable the S3C24x0 NAND driver. Also
+enable CONFIG_S3C_NAND_BOOT and CONFIG_MACH_HAS_LOWLEVEL_INIT to be
+able to call the s3c24x0_nand_boot() assembler routine from within the
+machine specific board_init_lowlevel() assembler function.
+
+@note This routine assumes an already working SDRAM controller and
+an initialized stack pointer.
+
+@note Basicly this routine runs from inside the internal SRAM. After load of
+the whole barebox image from the NAND flash memory into the SDRAM it adjusts
+the link register to the final SDRAM adress and returns.
+
+@note In the NAND boot mode, ECC is not checked. So, the first x KBytes used
+by barebox should have no bit error.
+
+Due to the fact the code to load the whole barebox from NAND must fit into
+the first 4kiB of the barebox image, the shrinked NAND driver is very
+minimalistic. Setup the NAND access timing is done in a safe manner, what
+means: Slowest possible values are used. If you want to increase the speed you
+should define the BOARD_DEFAULT_NAND_TIMING to a valid setting into the
+NFCONF register and add it to your board specific config.h. Refer S3C24x0's
+datasheet for further details. The macro #CALC_NFCONF_TIMING could help to
+calculate the register setting in a hardware independent manner.
+
+@note The regular NAND driver uses a platform data structure to define the
+NAND access timings.
+
+@note Its still possible to boot this image from NOR memory. If this routine
+detects it is running from NOR instead of the internal SRAM it skips any
+loading and returns immediately.
+
+*/
diff --git a/arch/arm/mach-samsung/mem-s3c24x0.c b/arch/arm/mach-samsung/mem-s3c24x0.c
new file mode 100644
index 0000000..6944504
--- /dev/null
+++ b/arch/arm/mach-samsung/mem-s3c24x0.c
@@ -0,0 +1,143 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/**
+ * @file
+ * @brief Basic clock, sdram and timer handling for S3C24xx CPUs
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <sizes.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
+#include <mach/gpio-s3c24x0.h>
+
+/**
+ * Calculate the amount of connected and available memory
+ * @return Memory size in bytes
+ */
+uint32_t s3c_get_memory_size(void)
+{
+ uint32_t reg, size;
+
+ /*
+ * detect the current memory size
+ */
+ reg = readl(S3C_BANKSIZE);
+
+ switch (reg & 0x7) {
+ case 0:
+ size = SZ_32M;
+ break;
+ case 1:
+ size = SZ_64M;
+ break;
+ case 2:
+ size = SZ_128M;
+ break;
+ case 4:
+ size = SZ_2M;
+ break;
+ case 5:
+ size = SZ_4M;
+ break;
+ case 6:
+ size = SZ_8M;
+ break;
+ default:
+ size = SZ_16M;
+ break;
+ }
+
+ /*
+ * Is bank7 also configured for SDRAM usage?
+ */
+ if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+ size <<= 1; /* also count this bank */
+
+ return size;
+}
+
+void s3c24xx_disable_second_sdram_bank(void)
+{
+ writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7);
+ writel(readl(S3C_MISCCR) | (1 << 18), S3C_MISCCR); /* disable its clock */
+}
+
+/**
+
+@page dev_s3c24xx_arch Samsung's S3C24xx Platforms in barebox
+
+@section s3c24xx_boards Boards using S3C24xx Processors
+
+@li @subpage arch/arm/boards/a9m2410/a9m2410.c
+@li @subpage arch/arm/boards/a9m2440/a9m2440.c
+
+@section s3c24xx_arch Documentation for S3C24xx Architectures Files
+
+@li @subpage arch/arm/mach-s3c24xx/generic.c
+
+@section s3c24xx_mem_map SDRAM Memory Map
+
+SDRAM starts at address 0x3000.0000 up to the available amount of connected
+SDRAM memory. Physically this CPU can handle up to 256MiB (two areas with
+up to 128MiB each).
+
+@subsection s3c24xx_mem_generic_map Generic Map
+- 0x0000.0000 Start of the internal SRAM when booting from NAND flash memory or CS signal to a NOR flash memory.
+- 0x0800.0000 Start of I/O space.
+- 0x3000.0000 Start of SDRAM area.
+ - 0x3000.0100 Start of the TAG list area.
+ - 0x3000.8000 Start of the linux kernel (physical address).
+- 0x4000.0000 Start of internal SRAM, when booting from NOR flash memory
+- 0x4800.0000 Start of the internal I/O area
+
+@section s3c24xx_asm_arm include/asm-arm/arch-s3c24xx directory guidelines
+All S3C24xx common headers are located here.
+
+@note Do not add board specific header files/information here.
+*/
+
+/** @page dev_s3c24xx_mach Samsung's S3C24xx based platforms
+
+@par barebox Map
+
+The location of the @a barebox itself depends on the available amount of
+installed SDRAM memory:
+
+- 0x30fc.0000 Start of @a barebox when 16MiB SDRAM is available
+- 0x31fc.0000 Start of @a barebox when 32MiB SDRAM is available
+- 0x33fc.0000 Start of @a barebox when 64MiB SDRAM is available
+
+Adjust the @p CONFIG_TEXT_BASE/CONFIG_ARCH_TEXT_BASE symbol in accordance to
+the available memory.
+
+@note The RAM based filesystem and the stack resides always below the
+@a barebox start address.
+
+@li @subpage dev_s3c24xx_wd_handling
+@li @subpage dev_s3c24xx_pll_handling
+@li @subpage dev_s3c24xx_sdram_handling
+@li @subpage dev_s3c24xx_nandboot_handling
+*/
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
deleted file mode 100644
index 38d8b75..0000000
--- a/arch/arm/mach-samsung/s3c24xx-clocks.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <config.h>
-#include <common.h>
-#include <init.h>
-#include <clock.h>
-#include <io.h>
-#include <mach/s3c-iomap.h>
-#include <mach/s3c-generic.h>
-#include <mach/s3c-clocks.h>
-#include <mach/s3c-busctl.h>
-
-/**
- * Calculate the current M-PLL clock.
- * @return Current frequency in Hz
- */
-uint32_t s3c_get_mpllclk(void)
-{
- uint32_t m, p, s, reg_val;
-
- reg_val = readl(S3C_MPLLCON);
- m = ((reg_val & 0xFF000) >> 12) + 8;
- p = ((reg_val & 0x003F0) >> 4) + 2;
- s = reg_val & 0x3;
-#ifdef CONFIG_CPU_S3C2410
- return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
-#endif
-#ifdef CONFIG_CPU_S3C2440
- return 2 * m * (S3C24XX_CLOCK_REFERENCE / (p << s));
-#endif
-}
-
-/**
- * Calculate the current U-PLL clock
- * @return Current frequency in Hz
- */
-uint32_t s3c_get_upllclk(void)
-{
- uint32_t m, p, s, reg_val;
-
- reg_val = readl(S3C_UPLLCON);
- m = ((reg_val & 0xFF000) >> 12) + 8;
- p = ((reg_val & 0x003F0) >> 4) + 2;
- s = reg_val & 0x3;
-
- return (S3C24XX_CLOCK_REFERENCE * m) / (p << s);
-}
-
-/**
- * Calculate the FCLK frequency used for the ARM CPU core
- * @return Current frequency in Hz
- */
-uint32_t s3c_get_fclk(void)
-{
- return s3c_get_mpllclk();
-}
-
-/**
- * Calculate the HCLK frequency used for the AHB bus (CPU to main peripheral)
- * @return Current frequency in Hz
- */
-uint32_t s3c_get_hclk(void)
-{
- uint32_t f_clk;
-
- f_clk = s3c_get_fclk();
-#ifdef CONFIG_CPU_S3C2410
- if (readl(S3C_CLKDIVN) & 0x02)
- return f_clk >> 1;
-#endif
-#ifdef CONFIG_CPU_S3C2440
- switch(readl(S3C_CLKDIVN) & 0x06) {
- case 2:
- return f_clk >> 1;
- case 4:
- return f_clk >> 2; /* TODO consider CAMDIVN */
- case 6:
- return f_clk / 3; /* TODO consider CAMDIVN */
- }
-#endif
- return f_clk;
-}
-
-/**
- * Calculate the PCLK frequency used for the slower peripherals
- * @return Current frequency in Hz
- */
-uint32_t s3c_get_pclk(void)
-{
- uint32_t p_clk;
-
- p_clk = s3c_get_hclk();
- if (readl(S3C_CLKDIVN) & 0x01)
- return p_clk >> 1;
- return p_clk;
-}
-
-/**
- * Calculate the UCLK frequency used by the USB host device
- * @return Current frequency in Hz
- */
-uint32_t s3c24_get_uclk(void)
-{
- return s3c_get_upllclk();
-}
-
-/**
- * Return correct UART frequency based on the UCON register
- */
-unsigned s3c_get_uart_clk(unsigned src)
-{
- switch (src & 3) {
- case 0:
- case 2:
- return s3c_get_pclk();
- case 1:
- return 0; /* TODO UEXTCLK */
- case 3:
- return 0; /* TODO FCLK/n */
- }
- return 0; /* not reached, to make compiler happy */
-}
-
-/**
- * Show the user the current clock settings
- */
-int s3c24xx_dump_clocks(void)
-{
- printf("refclk: %7d kHz\n", S3C24XX_CLOCK_REFERENCE / 1000);
- printf("mpll: %7d kHz\n", s3c_get_mpllclk() / 1000);
- printf("upll: %7d kHz\n", s3c_get_upllclk() / 1000);
- printf("fclk: %7d kHz\n", s3c_get_fclk() / 1000);
- printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000);
- printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000);
- printf("SDRAM1: CL%d@%dMHz\n", ((readl(S3C_BANKCON6) & 0xc) >> 2) + 2,
- s3c_get_hclk() / 1000000);
- if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
- printf("SDRAM2: CL%d@%dMHz\n",
- ((readl(S3C_BANKCON7) & 0xc) >> 2) + 2,
- s3c_get_hclk() / 1000000);
- return 0;
-}
-
-late_initcall(s3c24xx_dump_clocks);
diff --git a/drivers/mtd/nand/nand_s3c24xx.c b/drivers/mtd/nand/nand_s3c24xx.c
index dbf2e14..2799496 100644
--- a/drivers/mtd/nand/nand_s3c24xx.c
+++ b/drivers/mtd/nand/nand_s3c24xx.c
@@ -32,11 +32,11 @@
#include <linux/mtd/nand.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-nand.h>
+#include <mach/nand-s3c24x0.h>
#include <io.h>
#include <asm-generic/errno.h>
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
# define __nand_boot_init __bare_init
# ifndef BOARD_DEFAULT_NAND_TIMING
# define BOARD_DEFAULT_NAND_TIMING 0x0737
@@ -49,7 +49,7 @@
* Define this symbol for testing purpose. It will add a command to read an
* image from the NAND like it the boot strap code will do.
*/
-#define CONFIG_NAND_S3C24XX_BOOT_DEBUG
+#define CONFIG_NAND_S3C_BOOT_DEBUG
/* NAND controller's register */
@@ -497,7 +497,7 @@ static struct driver_d s3c24x0_nand_driver = {
.probe = s3c24x0_nand_probe,
};
-#ifdef CONFIG_S3C24XX_NAND_BOOT
+#ifdef CONFIG_S3C_NAND_BOOT
static void __nand_boot_init wait_for_completion(void __iomem *host)
{
@@ -545,7 +545,7 @@ static void __nand_boot_init nfc_addr(void __iomem *host, uint32_t offs,
* This function must be located in the first 4kiB of the barebox image
* (guess why).
*/
-void __nand_boot_init s3c24x0_nand_load_image(void *dest, int size, int page)
+void __nand_boot_init s3c_nand_load_image(void *dest, int size, int page)
{
void __iomem *host = (void __iomem *)S3C24X0_NAND_BASE;
unsigned pagesize;
@@ -603,7 +603,7 @@ void __nand_boot_init s3c24x0_nand_load_image(void *dest, int size, int page)
disable_nand_controller(host);
}
-#ifdef CONFIG_NAND_S3C24XX_BOOT_DEBUG
+#ifdef CONFIG_NAND_S3C_BOOT_DEBUG
#include <command.h>
static int do_nand_boot_test(int argc, char *argv[])
@@ -617,7 +617,7 @@ static int do_nand_boot_test(int argc, char *argv[])
dest = (void *)strtoul_suffix(argv[1], NULL, 0);
size = strtoul_suffix(argv[2], NULL, 0);
- s3c24x0_nand_load_image(dest, size, 0);
+ s3c_nand_load_image(dest, size, 0);
/* re-enable the controller again, as this was a test only */
enable_nand_controller((void *)S3C24X0_NAND_BASE,
@@ -636,7 +636,7 @@ BAREBOX_CMD_START(nand_boot_test)
BAREBOX_CMD_END
#endif
-#endif /* CONFIG_S3C24XX_NAND_BOOT */
+#endif /* CONFIG_S3C_NAND_BOOT */
/*
* Main initialization routine
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 186b596..a9383da 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -80,7 +80,7 @@ config DRIVER_SERIAL_PL010
config DRIVER_SERIAL_S3C
bool "Samsung S3C serial driver"
- depends on ARCH_S3C24xx
+ depends on ARCH_SAMSUNG
default y
help
Say Y here if you want to use the CONS on a Samsung S3C CPU
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
2012-05-13 12:39 ` [PATCH 1/9] Support most Samsung SoCs in S3C serial driver Alexey Galakhov
2012-05-13 12:39 ` [PATCH 2/9] Fine split S3C arch dependencies from generic code Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-14 8:13 ` Juergen Beisert
2012-05-13 12:40 ` [PATCH 4/9] S5PV210 iROM magic boot code Alexey Galakhov
` (5 subsequent siblings)
8 siblings, 1 reply; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/Kconfig | 6 +
arch/arm/Makefile | 1 +
arch/arm/boards/tiny210/Makefile | 1 +
arch/arm/boards/tiny210/config.h | 1 +
arch/arm/boards/tiny210/lowlevel.c | 41 +
arch/arm/boards/tiny210/tiny210.c | 113 +++
arch/arm/mach-samsung/Kconfig | 24 +
arch/arm/mach-samsung/Makefile | 1 +
arch/arm/mach-samsung/clocks-s5pcxx.c | 98 +++
arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++
arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h | 55 ++
arch/arm/mach-samsung/include/mach/gpio.h | 3 +
arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 49 ++
arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798 ++++++++++++++++++++
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 3 +
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 3 +
16 files changed, 1320 insertions(+)
create mode 100644 arch/arm/boards/tiny210/Makefile
create mode 100644 arch/arm/boards/tiny210/config.h
create mode 100644 arch/arm/boards/tiny210/lowlevel.c
create mode 100644 arch/arm/boards/tiny210/tiny210.c
create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8a4e1a2..f465084 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -73,6 +73,12 @@ config ARCH_S3C24xx
select CPU_ARM920T
select GENERIC_GPIO
+config ARCH_S5PCxx
+ bool "Samsung S5PC110, S5PV210"
+ select ARCH_SAMSUNG
+ select CPU_V7
+ select GENERIC_GPIO
+
config ARCH_VERSATILE
bool "ARM Versatile boards (ARM926EJ-S)"
select CPU_ARM926T
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d0bfd71..1af1090 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -133,6 +133,7 @@ board-$(CONFIG_MACH_TX25) := karo-tx25
board-$(CONFIG_MACH_TQMA53) := tqma53
board-$(CONFIG_MACH_TX51) := karo-tx51
board-$(CONFIG_MACH_MX6Q_ARM2) := freescale-mx6-arm2
+board-$(CONFIG_MACH_TINY210) := tiny210
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
diff --git a/arch/arm/boards/tiny210/Makefile b/arch/arm/boards/tiny210/Makefile
new file mode 100644
index 0000000..9c38e60
--- /dev/null
+++ b/arch/arm/boards/tiny210/Makefile
@@ -0,0 +1 @@
+obj-y += tiny210.o lowlevel.o
diff --git a/arch/arm/boards/tiny210/config.h b/arch/arm/boards/tiny210/config.h
new file mode 100644
index 0000000..ebf661e
--- /dev/null
+++ b/arch/arm/boards/tiny210/config.h
@@ -0,0 +1 @@
+#define S5PCXX_CLOCK_REFERENCE 24000000
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
new file mode 100644
index 0000000..8926fda
--- /dev/null
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-clocks.h>
+
+void __bare_init board_init_lowlevel(void)
+{
+ /* TODO: initialize PLL here */
+
+ if (get_pc() < 0xD0000000) /* Are we running from iRAM? */
+ return; /* No, we don't. */
+
+ /* TODO: initialize DRAM here */
+
+ /* TODO: load barebox to DRAM here */
+
+ while (1) { } /* hang */
+}
diff --git a/arch/arm/boards/tiny210/tiny210.c b/arch/arm/boards/tiny210/tiny210.c
new file mode 100644
index 0000000..eb23196
--- /dev/null
+++ b/arch/arm/boards/tiny210/tiny210.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ * Based on Mini6410 code by Juergen Beisert
+ *
+ * Copyright (C) 2012 Juergen Beisert, Pengutronix
+ *
+ * In some ways inspired by code
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <sizes.h>
+#include <generated/mach-types.h>
+#include <dm9000.h>
+#include <gpio.h>
+#include <led.h>
+#include <io.h>
+#include <nand.h>
+#include <asm/armlinux.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-clocks.h>
+#include <mach/s3c-generic.h>
+
+
+static const unsigned pin_usage[] = {
+ /* TODO */
+};
+
+static struct gpio_led leds[] = {
+ {
+ .gpio = GPJ20,
+ .led = {
+ .name = "led1",
+ }
+ }, {
+ .gpio = GPJ21,
+ .led = {
+ .name = "led2",
+ }
+ }, {
+ .gpio = GPJ22,
+ .led = {
+ .name = "led3",
+ }
+ }, {
+ .gpio = GPJ23,
+ .led = {
+ .name = "led4",
+ }
+ }
+};
+
+static int tiny210_mem_init(void)
+{
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, (512 << 20));
+ return 0;
+}
+mem_initcall(tiny210_mem_init);
+
+static int tiny210_console_init(void)
+{
+ /*
+ * configure the UART1 right now, as barebox will
+ * start to send data immediately
+ */
+ s3c_gpio_mode(GPA00_RXD0 | ENABLE_PU);
+ s3c_gpio_mode(GPA01_TXD0);
+ s3c_gpio_mode(GPA02_NCTS0 | ENABLE_PU);
+ s3c_gpio_mode(GPA03_NRTS0);
+
+ add_generic_device("s3c_serial", -1, NULL,
+ S3C_UART1_BASE, S3C_UART1_SIZE,
+ IORESOURCE_MEM, NULL);
+ return 0;
+}
+console_initcall(tiny210_console_init);
+
+static int tiny210_devices_init(void)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
+ s3c_gpio_mode(pin_usage[i]);
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+ leds[i].active_low = 1;
+ gpio_direction_output(leds[i].gpio, leds[i].active_low);
+ led_gpio_register(&leds[i]);
+ }
+
+ armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
+ armlinux_set_architecture(MACH_TYPE_MINI210);
+
+ return 0;
+}
+device_initcall(tiny210_devices_init);
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 4d5f7c5..fcef677 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -13,6 +13,7 @@ config BOARDINFO
default "Mini 2440" if MACH_MINI2440
default "Digi A9M2440" if MACH_A9M2440
default "Digi A9M2410" if MACH_A9M2410
+ default "Tiny 210" if MACH_TINY210
if ARCH_S3C24xx
@@ -80,6 +81,29 @@ endmenu
endif
+if ARCH_S5PCxx
+
+config CPU_S5PC110
+ bool
+
+config CPU_S5PV210
+ bool
+
+choice
+
+ prompt "S5PCxx board type"
+
+config MACH_TINY210
+ bool "Tiny 210"
+ select CPU_S5PV210
+ select MACH_HAS_LOWLEVEL_INIT
+ select MACH_DO_LOWLEVEL_INIT
+
+endchoice
+
+endif
+
+
menu "S3C Features "
config S3C_LOWLEVEL_INIT
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 8f032fb..66f3fd2 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,4 +1,5 @@
obj-y += s3c-timer.o generic.o
obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
+obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o
obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/clocks-s5pcxx.c b/arch/arm/mach-samsung/clocks-s5pcxx.c
new file mode 100644
index 0000000..1f4790b
--- /dev/null
+++ b/arch/arm/mach-samsung/clocks-s5pcxx.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ * Copyright (C) 2012 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-clocks.h>
+
+static inline uint32_t clkdiv(uint32_t clk, unsigned bit, unsigned mask)
+{
+ uint32_t ratio = (readl(S5P_CLK_DIV0) >> bit) & mask;
+ return clk / (ratio + 1);
+}
+
+uint32_t s3c_get_mpllclk(void)
+{
+ uint32_t m, p, s;
+ uint32_t reg = readl(S5P_xPLL_CON + S5P_MPLL);
+ m = (reg >> 16) & 0x3ff;
+ p = (reg >> 8) & 0x3f;
+ s = (reg >> 0) & 0x7;
+ return m * ((S5PCXX_CLOCK_REFERENCE) / (p << s));
+}
+
+uint32_t s3c_get_apllclk(void)
+{
+ uint32_t m, p, s;
+ uint32_t reg = readl(S5P_xPLL_CON + S5P_APLL);
+ m = (reg >> 16) & 0x3ff;
+ p = (reg >> 8) & 0x3f;
+ s = (reg >> 0) & 0x7;
+ s -= 1;
+ return m * ((S5PCXX_CLOCK_REFERENCE) / (p << s));
+}
+
+static uint32_t s5p_get_a2mclk(void)
+{
+ return clkdiv(s3c_get_apllclk(), 4, 0x7);
+}
+
+static uint32_t s5p_get_moutpsysclk(void)
+{
+ if (readl(S5P_CLK_SRC0) & (1 << 24)) /* MUX_PSYS */
+ return s5p_get_a2mclk();
+ else
+ return s3c_get_mpllclk();
+}
+
+uint32_t s3c_get_hclk(void)
+{
+ return clkdiv(s5p_get_moutpsysclk(), 24, 0xf);
+}
+
+uint32_t s3c_get_pclk(void)
+{
+ return clkdiv(s3c_get_hclk(), 28, 0x7);
+}
+
+/* we are using the internal 'uclk1' as the UART source */
+static unsigned s3c_get_uart_clk_uclk1(void)
+{
+ unsigned clk = s3c_get_mpllclk(); /* TODO check for EPLL */
+ unsigned uartpdiv = ((readl(S5P_CLK_DIV4) >> 16) & 0x3) + 1; /* TODO this is UART0 only */
+ return clk / uartpdiv;
+}
+
+unsigned s3c_get_uart_clk(unsigned src) {
+ return (src & 1) ? s3c_get_uart_clk_uclk1() : s3c_get_pclk();
+}
+
+int s5pcxx_dump_clocks(void)
+{
+ printf("refclk: %7d kHz\n", S5PCXX_CLOCK_REFERENCE / 1000);
+ printf("apll: %7d kHz\n", s3c_get_apllclk() / 1000);
+ printf("mpll: %7d kHz\n", s3c_get_mpllclk() / 1000);
+/* printf("CPU: %7d kHz\n", s3c_get_cpuclk() / 1000); */
+ printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000);
+ printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000);
+ return 0;
+}
+
+late_initcall(s5pcxx_dump_clocks);
diff --git a/arch/arm/mach-samsung/gpio-s5pcxx.c b/arch/arm/mach-samsung/gpio-s5pcxx.c
new file mode 100644
index 0000000..604a63f
--- /dev/null
+++ b/arch/arm/mach-samsung/gpio-s5pcxx.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ * Copyright (C) 2012 Juergen Beisert, Pengutronix
+ *
+ * This codes bases partially on code from the Linux kernel:
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <io.h>
+#include <gpio.h>
+#include <mach/s3c-iomap.h>
+
+#define S3C_GPACON (S3C_GPIO_BASE)
+#define S3C_GPADAT (S3C_GPIO_BASE + 0x04)
+#define S3C_GPAPUD (S3C_GPIO_BASE + 0x08)
+
+static inline unsigned group_offset(unsigned group)
+{
+ return group * 0x20;
+}
+
+void gpio_set_value(unsigned gpio, int value)
+{
+ unsigned group = GET_GROUP(gpio);
+ unsigned bit = GET_BIT(gpio);
+ unsigned offset = group_offset(group);
+ uint32_t reg;
+
+ reg = readl(S3C_GPADAT + offset);
+ reg &= ~(1 << bit);
+ reg |= (!!value) << bit;
+ writel(reg, S3C_GPADAT + offset);
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ unsigned group = GET_GROUP(gpio);
+ unsigned bit = GET_BIT(gpio);
+ unsigned offset = group_offset(group);
+ uint32_t reg;
+
+ /* value */
+ reg = readl(S3C_GPADAT + offset);
+
+ return !!(reg & (1 << bit));
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ unsigned group = GET_GROUP(gpio);
+ unsigned bit = GET_BIT(gpio);
+ unsigned offset = group_offset(group);
+ uint32_t reg;
+
+ bit <<= 2;
+ reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+ writel(reg, S3C_GPACON + offset);
+
+ return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned group = GET_GROUP(gpio);
+ unsigned bit = GET_BIT(gpio);
+ unsigned offset = group_offset(group);
+ uint32_t reg;
+
+ gpio_set_value(gpio, value);
+
+ bit <<= 2;
+ reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+ reg |= 0x1 << bit;
+ writel(reg, S3C_GPACON + offset);
+
+ return 0;
+}
+
+
+/* 'gpio_mode' must be one of the 'GP?_*' macros */
+void s3c_gpio_mode(unsigned gpio_mode)
+{
+ unsigned group = GET_GROUP(gpio_mode);
+ unsigned bit = GET_BIT(gpio_mode);
+ unsigned func = GET_FUNC(gpio_mode);
+ unsigned offset = group_offset(group);
+ unsigned reg;
+
+ bit <<= 1;
+ if (PUD_PRESENT(gpio_mode)) {
+ reg = readl(S3C_GPAPUD + offset);
+ reg &= ~(PUD_MASK << bit);
+ reg |= GET_PUD(gpio_mode) << bit;
+ writel(reg, S3C_GPAPUD + offset);
+ }
+
+ bit <<= 1;
+ reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+ writel(reg | (func << bit), S3C_GPACON + offset);
+
+ if (func == 1) { /* output? if yes, also set the initial value */
+ reg = readl(S3C_GPADAT + offset) & ~(1 << (bit >> 2));
+ reg |= GET_GPIOVAL(gpio_mode) << (bit >> 2);
+ writel(reg, S3C_GPADAT + offset);
+ }
+
+}
diff --git a/arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h b/arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
new file mode 100644
index 0000000..f9d49c5
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+# define S5P_APLL 0x00
+# define S5P_MPLL 0x08
+# define S5P_EPLL 0x10
+# define S5P_VPLL 0x20
+# define S5P_xPLL_LOCK (S5P_CLOCK_POWER_BASE)
+# define S5P_xPLL_CON (S5P_CLOCK_POWER_BASE + 0x100)
+# define S5P_xPLL_CON0 (S5P_xPLL_CON)
+# define S5P_xPLL_CON1 (S5P_xPLL_CON + 0x4)
+
+# define S5P_xPLLCON_GET_MDIV(x) (((x) >> 16) & 0x3ff)
+# define S5P_xPLLCON_GET_PDIV(x) (((x) >> 8) & 0x3f)
+# define S5P_xPLLCON_GET_SDIV(x) ((x) & 0x3)
+
+# define S5P_CLK_SRC0 (S5P_CLOCK_POWER_BASE + 0x200)
+# define S5P_CLK_SRC1 (S5P_CLOCK_POWER_BASE + 0x204)
+# define S5P_CLK_SRC2 (S5P_CLOCK_POWER_BASE + 0x208)
+# define S5P_CLK_SRC3 (S5P_CLOCK_POWER_BASE + 0x20C)
+# define S5P_CLK_SRC4 (S5P_CLOCK_POWER_BASE + 0x210)
+# define S5P_CLK_SRC5 (S5P_CLOCK_POWER_BASE + 0x214)
+# define S5P_CLK_SRC6 (S5P_CLOCK_BASE + 0x218)
+
+# define S5P_CLK_DIV0 (S5P_CLOCK_POWER_BASE + 0x300)
+# define S5P_CLK_DIV1 (S5P_CLOCK_POWER_BASE + 0x304)
+# define S5P_CLK_DIV2 (S5P_CLOCK_POWER_BASE + 0x308)
+# define S5P_CLK_DIV3 (S5P_CLOCK_POWER_BASE + 0x30C)
+# define S5P_CLK_DIV4 (S5P_CLOCK_POWER_BASE + 0x310)
+# define S5P_CLK_DIV5 (S5P_CLOCK_POWER_BASE + 0x314)
+# define S5P_CLK_DIV6 (S5P_CLOCK_POWER_BASE + 0x318)
+# define S5P_CLK_DIV7 (S5P_CLOCK_POWER_BASE + 0x31C)
+
+# define S5P_CLK_GATE_SCLK (S5P_CLOCK_POWER_BASE + 0x444)
+# define S5P_CLK_GATE_IP0 (S5P_CLOCK_POWER_BASE + 0x460)
+# define S5P_CLK_GATE_IP1 (S5P_CLOCK_POWER_BASE + 0x464)
+# define S5P_CLK_GATE_IP2 (S5P_CLOCK_POWER_BASE + 0x468)
+# define S5P_CLK_GATE_IP3 (S5P_CLOCK_POWER_BASE + 0x46C)
+# define S5P_CLK_GATE_IP4 (S5P_CLOCK_POWER_BASE + 0x470)
+# define S5P_CLK_GATE_BLOCK (S5P_CLOCK_POWER_BASE + 0x480)
+# define S5P_CLK_GATE_IP5 (S5P_CLOCK_POWER_BASE + 0x484)
+
+# define S5P_OTHERS (S5P_CLOCK_POWER_BASE + 0xE000)
+# define S5P_USB_PHY_CONTROL (S5P_CLOCK_POWER_BASE + 0xE80C)
diff --git a/arch/arm/mach-samsung/include/mach/gpio.h b/arch/arm/mach-samsung/include/mach/gpio.h
index 3723394..4d7d217 100644
--- a/arch/arm/mach-samsung/include/mach/gpio.h
+++ b/arch/arm/mach-samsung/include/mach/gpio.h
@@ -16,6 +16,9 @@
#ifdef CONFIG_ARCH_S3C24xx
# include <mach/iomux-s3c24x0.h>
#endif
+#ifdef CONFIG_ARCH_S5PCxx
+# include <mach/iomux-s5pcxx.h>
+#endif
void gpio_set_value(unsigned, int);
int gpio_direction_input(unsigned);
diff --git a/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h b/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
new file mode 100644
index 0000000..cb05527
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* S5PV210 device base addresses */
+
+#define S5P_CLOCK_POWER_BASE 0xE0100000
+#define S3C_GPIO_BASE 0xE0200000
+#define S3C_TIMER_BASE 0xE2500000
+#define S3C_WATCHDOG_BASE 0xE2700000
+#define S3C_UART_BASE 0xE2900000
+#define S3C_USB_HOST_BASE 0xEC200000
+#define S3C_NAND_BASE 0xB0E00000
+
+/* external IO space */
+#define S3C_CS0_BASE 0x80000000
+#define S3C_CS1_BASE 0x88000000
+#define S3C_CS2_BASE 0x90000000
+#define S3C_CS3_BASE 0x98000000
+#define S3C_CS4_BASE 0xA0000000
+#define S3C_CS5_BASE 0xA8000000
+
+#define S3C_SDRAM_BASE 0x20000000
+#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x60000000)
+
+#define S3C_UART1_BASE (S3C_UART_BASE)
+#define S3C_UART1_SIZE 0x400
+#define S3C_UART2_BASE (S3C_UART_BASE + 0x400)
+#define S3C_UART2_SIZE 0x400
+#define S3C_UART3_BASE (S3C_UART_BASE + 0x800)
+#define S3C_UART3_SIZE 0x400
+#define S3C_UART_HAS_UBRDIVSLOT
+#define S3C_UART_HAS_UINTM
diff --git a/arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h b/arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
new file mode 100644
index 0000000..0677de4
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
@@ -0,0 +1,798 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Tested with S5PV210 */
+
+#ifndef __MACH_IOMUX_S5PCXX_H
+# define __MACH_IOMUX_S5PCXX_H
+
+/* 3322222222221111111111
+ * 10987654321098765432109876543210
+ * ^^^^^^_ Bit offset
+ * ^^^^^_______ Group Number
+ * ^^^^____________ Function
+ * ^________________ initial GPIO out value
+ * ^_________________ Pull up/down feature present
+ * ^^__________________ initial pull up/down setting
+ */
+
+#define PIN(group,bit) ((group << 6) + bit)
+#define FUNC(x) (((x) & 0xf) << 11)
+#define GET_FUNC(x) (((x) >> 11) & 0xf)
+#define GET_GROUP(x) (((x) >> 6) & 0x1f)
+#define GET_BIT(x) ((x) & 0x3f)
+#define GET_GPIOVAL(x) (!!((x) & (1 << 15)))
+#define GPIO_OUT (1 << 11)
+#define GPIO_IN (0 << 11)
+#define GPIO_VAL(x) ((!!(x)) << 15)
+#define PUD_MASK 0x3
+#define PUD (1 << 16)
+#define PUD_PRESENT(x) (!!((x) & (1 << 16)))
+#define DISABLE_PUD (0 << 17)
+#define ENABLE_PU (2 << 17)
+#define ENABLE_PD (1 << 17)
+#define GET_PUD(x) (((x) >> 17) & PUD_MASK)
+
+/*
+ * To have a chance for simple GPIO manipulation routines
+ * define the GPIO numbers with a real simple scheme.
+ *
+ * Keep in mind: The 'GPIO_2_NO' creates a value to be used with the real gpio
+ * routines and *not* for the multiplexer routines!
+ */
+#define GPIO_2_NO(x,y) (PIN(x,y))
+
+/*
+ * Group A0: GPIO 0...7
+ * Used GPIO: 0...7
+ * These pins can also act as GPIO outputs
+ */
+#define GPA00 (PIN(0,0) | PUD)
+#define GPA00_GPIO (GPA00 | FUNC(0))
+#define GPA00_RXD0 (GPA00 | FUNC(2))
+#define GPA01 (PIN(0,1) | PUD)
+#define GPA01_GPIO (GPA01 | FUNC(0))
+#define GPA01_TXD0 (GPA01 | FUNC(2))
+#define GPA02 (PIN(0,2) | PUD)
+#define GPA02_GPIO (GPA02 | FUNC(0))
+#define GPA02_NCTS0 (GPA02 | FUNC(2))
+#define GPA03 (PIN(0,3) | PUD)
+#define GPA03_GPIO (GPA03 | FUNC(0))
+#define GPA03_NRTS0 (GPA03 | FUNC(2))
+#define GPA04 (PIN(0,4) | PUD)
+#define GPA04_GPIO (GPA04 | FUNC(0))
+#define GPA04_RXD1 (GPA04 | FUNC(2))
+#define GPA05 (PIN(0,5) | PUD)
+#define GPA05_GPIO (GPA05 | FUNC(0))
+#define GPA05_TXD1 (GPA05 | FUNC(2))
+#define GPA06 (PIN(0,6) | PUD)
+#define GPA06_GPIO (GPA06 | FUNC(0))
+#define GPA06_NCTS1 (GPA06 | FUNC(2))
+#define GPA07 (PIN(0,7) | PUD)
+#define GPA07_GPIO (GPA07 | FUNC(0))
+#define GPA07_NRTS1 (GPA07 | FUNC(2))
+
+/*
+ * Group A1: GPIO 0..3
+ * Used GPIO: 0..3
+ * These pins can also act as GPIO outputs
+ */
+#define GPA10 (PIN(1,0) | PUD)
+#define GPA10_GPIO (GPA10 | FUNC(0))
+#define GPA10_RXD2 (GPA10 | FUNC(2))
+#define GPA10_RXDAUD (GPA0 | FUNC(4))
+#define GPA11 (PIN(1,1) | PUD)
+#define GPA11_GPIO (GPA11 | FUNC(0))
+#define GPA11_TXD2 (GPA11 | FUNC(2))
+#define GPA11_TXDAUD (GPA1 | FUNC(4))
+#define GPA12 (PIN(1,2) | PUD)
+#define GPA12_GPIO (GPA12 | FUNC(0))
+#define GPA12_RXD3 (GPA12 | FUNC(2))
+#define GPA12_NCTS2 (GPA12 | FUNC(3))
+#define GPA13 (PIN(1,3) | PUD)
+#define GPA13_GPIO (GPA13 | FUNC(0))
+#define GPA13_TXD3 (GPA13 | FUNC(2))
+#define GPA13_NRTS2 (GPA13 | FUNC(3))
+
+
+/*
+ * Group B: GPIO 0...7
+ * Used GPIO: 0...7
+ * These pins can also act as GPIO outputs
+ */
+#define GPB0 (PIN(2,0) | PUD)
+#define GPB0_GPIO (GPB0 | FUNC(0))
+#define GPB0_SPI0_CLK (GPB0 | FUNC(2))
+#define GPB1 (PIN(2,1) | PUD)
+#define GPB1_GPIO (GPB1 | FUNC(0))
+#define GPB1_SPI0_NCS (GPB1 | FUNC(2))
+#define GPB2 (PIN(2,2) | PUD)
+#define GPB2_GPIO (GPB2 | FUNC(0))
+#define GPB2_SPI0_MISO (GPB2 | FUNC(2))
+#define GPB3 (PIN(2,3) | PUD)
+#define GPB3_GPIO (GPB3 | FUNC(0))
+#define GPB3_SPI0_MOSI (GPB3 | FUNC(2))
+#define GPB4 (PIN(2,4) | PUD)
+#define GPB4_GPIO (GPB4 | FUNC(0))
+#define GPB4_SPI1_CLK (GPB4 | FUNC(2))
+#define GPB5 (PIN(2,5) | PUD)
+#define GPB5_GPIO (GPB5 | FUNC(0))
+#define GPB5_SPI1_NCS (GPB5 | FUNC(0))
+#define GPB6 (PIN(2,6) | PUD)
+#define GPB6_GPIO (GPB6 | FUNC(0))
+#define GPB6_SPI1_MISO (GPB6 | FUNC(0))
+#define GPB7 (PIN(2,7) | PUD)
+#define GPB7_GPIO (GPB7 | FUNC(0))
+#define GPB7_SPI1_MOSI (GPB7 | FUNC(0))
+
+/*
+ * Group C0: GPIO 0...4
+ */
+#define GPC00 (PIN(3,0) | PUD)
+#define GPC00_GPIO (GPC00 | FUNC(0))
+#define GPC00_I2S1_SCLK (GPC00 | FUNC(2))
+#define GPC00_PCM1_SCLK (GPC00 | FUNC(3))
+#define GPC00_AC97_BITCLK (GPC00 | FUNC(4))
+#define GPC01 (PIN(3,1) | PUD)
+#define GPC01_GPIO (GPC01 | FUNC(0))
+#define GPC01_I2S1_CDCLK (GPC01 | FUNC(2))
+#define GPC01_PCM1_EXTCLK (GPC01 | FUNC(3))
+#define GPC01_AC97_NRESET (GPC01 | FUNC(4))
+#define GPC02 (PIN(3,2) | PUD)
+#define GPC02_GPIO (GPC02 | FUNC(0))
+#define GPC02_I2S1_LRCK (GPC02 | FUNC(2))
+#define GPC02_PCM1_FSYNC (GPC02 | FUNC(3))
+#define GPC02_AC97_SYNC (GPC02 | FUNC(4))
+#define GPC03 (PIN(3,3) | PUD)
+#define GPC03_GPIO (GPC03 | FUNC(0))
+#define GPC03_I2S1_SDI (GPC03 | FUNC(2))
+#define GPC03_PCM1_SIN (GPC03 | FUNC(3))
+#define GPC03_AC97_SDI (GPC03 | FUNC(4))
+#define GPC04 (PIN(3,4) | PUD)
+#define GPC04_GPIO (GPC04 | FUNC(0))
+#define GPC04_I2S1_SDO (GPC04 | FUNC(2))
+#define GPC04_PCM1_SOUT (GPC04 | FUNC(3))
+#define GPC04_AC97_SDO (GPC04 | FUNC(4))
+
+/*
+ * Group C1: GPIO 0...4
+ */
+#define GPC10 (PIN(4,0) | PUD)
+#define GPC10_GPIO (GPC10 | FUNC(0))
+#define GPC10_PCM2_SCLK (GPC10 | FUNC(2))
+#define GPC10_SPDIF_0_OUT (GPC10 | FUNC(3))
+#define GPC10_I2S2_SCLK (GPC10 | FUNC(4))
+#define GPC11 (PIN(4,1) | PUD)
+#define GPC11_GPIO (GPC11 | FUNC(0))
+#define GPC11_PCM2_EXTCLK (GPC11 | FUNC(2))
+#define GPC11_SPDIF_EXTCLK (GPC11 | FUNC(3))
+#define GPC11_I2S2_CDCLK (GPC11 | FUNC(4))
+#define GPC12 (PIN(4,2) | PUD)
+#define GPC12_GPIO (GPC12 | FUNC(0))
+#define GPC12_PCM2_FSYNC (GPC12 | FUNC(2))
+#define GPC12_LCD_FRM (GPC12 | FUNC(3))
+#define GPC12_I2S2_LRCK (GPC12 | FUNC(4))
+#define GPC13 (PIN(4,3) | PUD)
+#define GPC13_GPIO (GPC13 | FUNC(0))
+#define GPC13_PCM2_SIN (GPC13 | FUNC(2))
+#define GPC13_I2S2_SDI (GPC13 | FUNC(4))
+#define GPC14 (PIN(4,4) | PUD)
+#define GPC14_GPIO (GPC14 | FUNC(0))
+#define GPC14_PCM2_SOUT (GPC14 | FUNC(2))
+#define GPC14_I2S2_SDO (GPC14 | FUNC(4))
+
+/*
+ * Group D0: GPIO 0...3
+ */
+#define GPD00 (PIN(5,0) | PUD)
+#define GPD00_GPIO (GPD00 | FUNC(0))
+#define GPD00_TOUT_0 (GPD00 | FUNC(2))
+#define GPD01 (PIN(5,1) | PUD)
+#define GPD01_GPIO (GPD01 | FUNC(0))
+#define GPD01_TOUT_1 (GPD01 | FUNC(2))
+#define GPD02 (PIN(5,2) | PUD)
+#define GPD02_GPIO (GPD02 | FUNC(0))
+#define GPD02_TOUT_2 (GPD02 | FUNC(2))
+#define GPD03 (PIN(5,3) | PUD)
+#define GPD03_GPIO (GPD03 | FUNC(0))
+#define GPD03_TOUT_3 (GPD03 | FUNC(2))
+
+/*
+ * Group D1: GPIO 0...5
+ */
+#define GPD10 (PIN(6,0) | PUD)
+#define GPD10_GPIO (GPD10 | FUNC(0))
+#define GPD10_I2C0_SDA (GPD10 | FUNC(2))
+#define GPD11 (PIN(6,0) | PUD)
+#define GPD11_GPIO (GPD11 | FUNC(0))
+#define GPD11_I2C0_SCL (GPD11 | FUNC(2))
+#define GPD12 (PIN(6,0) | PUD)
+#define GPD12_GPIO (GPD12 | FUNC(0))
+#define GPD12_I2C1_SDA (GPD12 | FUNC(2))
+#define GPD13 (PIN(6,0) | PUD)
+#define GPD13_GPIO (GPD13 | FUNC(0))
+#define GPD13_I2C1_SCL (GPD13 | FUNC(2))
+#define GPD14 (PIN(6,0) | PUD)
+#define GPD14_GPIO (GPD14 | FUNC(0))
+#define GPD14_I2C2_SDA (GPD14 | FUNC(2))
+#define GPD15 (PIN(6,0) | PUD)
+#define GPD15_GPIO (GPD15 | FUNC(0))
+#define GPD15_I2C2_SCL (GPD15 | FUNC(2))
+
+/*
+ * Group E0: GPIO 0...7
+ */
+#define GPE00 (PIN(7,0) | PUD)
+#define GPE00_GPIO (GPE00 | FUNC(0))
+#define GPE00_CAM_A_PCLK (GPE00 | FUNC(2))
+#define GPE01 (PIN(7,1) | PUD)
+#define GPE01_GPIO (GPE01 | FUNC(0))
+#define GPE01_CAM_A_VSYNC (GPE01 | FUNC(2))
+#define GPE02 (PIN(7,2) | PUD)
+#define GPE02_GPIO (GPE02 | FUNC(0))
+#define GPE02_CAM_A_HREF (GPE02 | FUNC(2))
+#define GPE03 (PIN(7,3) | PUD)
+#define GPE03_GPIO (GPE03 | FUNC(0))
+#define GPE03_CAM_A_DATA0 (GPE03 | FUNC(2))
+#define GPE04 (PIN(7,4) | PUD)
+#define GPE04_GPIO (GPE04 | FUNC(0))
+#define GPE04_CAM_A_DATA1 (GPE04 | FUNC(2))
+#define GPE05 (PIN(7,5) | PUD)
+#define GPE05_GPIO (GPE05 | FUNC(0))
+#define GPE05_CAM_A_DATA2 (GPE05 | FUNC(2))
+#define GPE06 (PIN(7,6) | PUD)
+#define GPE06_GPIO (GPE06 | FUNC(0))
+#define GPE06_CAM_A_DATA3 (GPE06 | FUNC(2))
+#define GPE07 (PIN(7,7) | PUD)
+#define GPE07_GPIO (GPE07 | FUNC(0))
+#define GPE07_CAM_A_DATA4 (GPE07 | FUNC(2))
+
+/*
+ * Group E1: GPIO 0...4
+ */
+#define GPE10 (PIN(8,0) | PUD)
+#define GPE10_GPIO (GPE10 | FUNC(0))
+#define GPE10_CAM_A_DATA5 (GPE10 | FUNC(2))
+#define GPE11 (PIN(8,1) | PUD)
+#define GPE11_GPIO (GPE11 | FUNC(0))
+#define GPE11_CAM_A_DATA6 (GPE11 | FUNC(2))
+#define GPE12 (PIN(8,2) | PUD)
+#define GPE12_GPIO (GPE12 | FUNC(0))
+#define GPE12_CAM_A_DATA7 (GPE12 | FUNC(2))
+#define GPE13 (PIN(8,3) | PUD)
+#define GPE13_GPIO (GPE13 | FUNC(0))
+#define GPE13_CAM_A_CLKOUT (GPE13 | FUNC(2))
+#define GPE14 (PIN(8,4) | PUD)
+#define GPE14_GPIO (GPE14 | FUNC(0))
+#define GPE14_CAM_A_FIELD (GPE14 | FUNC(2))
+
+/*
+ * Group F0: GPIO 0...7
+ */
+#define GPF00 (PIN(9,0) | PUD)
+#define GPF00_GPIO (GPF00 | FUNC(0))
+#define GPF00_LCD_HSYNC (GPF00 | FUNC(2))
+#define GPF00_SYS_CS0 (GPF00 | FUNC(3))
+#define GPF00_VEN_HSYNC (GPF00 | FUNC(4))
+#define GPF01 (PIN(9,1) | PUD)
+#define GPF01_GPIO (GPF01 | FUNC(0))
+#define GPF01_LCD_VSYNC (GPF01 | FUNC(2))
+#define GPF01_SYS_CS1 (GPF01 | FUNC(3))
+#define GPF01_VEN_VSYNC (GPF01 | FUNC(4))
+#define GPF02 (PIN(9,2) | PUD)
+#define GPF02_GPIO (GPF02 | FUNC(0))
+#define GPF02_LCD_VDEN (GPF02 | FUNC(2))
+#define GPF02_SYS_RS (GPF02 | FUNC(3))
+#define GPF02_VEN_HREF (GPF02 | FUNC(4))
+#define GPF03 (PIN(9,3) | PUD)
+#define GPF03_GPIO (GPF03 | FUNC(0))
+#define GPF03_LCD_VCLK (GPF03 | FUNC(2))
+#define GPF03_SYS_WE (GPF03 | FUNC(3))
+#define GPF03_V601_CLK (GPF03 | FUNC(4))
+#define GPF04 (PIN(9,4) | PUD)
+#define GPF04_GPIO (GPF04 | FUNC(0))
+#define GPF04_LCD_VD0 (GPF04 | FUNC(2))
+#define GPF04_SYS_VS0 (GPF04 | FUNC(3))
+#define GPF04_VEN_DATA0 (GPF04 | FUNC(4))
+#define GPF05 (PIN(9,5) | PUD)
+#define GPF05_GPIO (GPF05 | FUNC(0))
+#define GPF05_LCD_VD1 (GPF05 | FUNC(2))
+#define GPF05_SYS_VD1 (GPF05 | FUNC(3))
+#define GPF05_VEN_DATA1 (GPF05 | FUNC(4))
+#define GPF06 (PIN(9,6) | PUD)
+#define GPF06_GPIO (GPF06 | FUNC(0))
+#define GPF06_LCD_VD2 (GPF06 | FUNC(2))
+#define GPF06_SYS_VD2 (GPF06 | FUNC(3))
+#define GPF06_VEN_DATA2 (GPF06 | FUNC(4))
+#define GPF07 (PIN(9,7) | PUD)
+#define GPF07_GPIO (GPF07 | FUNC(0))
+#define GPF07_LCD_VD3 (GPF07 | FUNC(2))
+#define GPF07_SYS_VD3 (GPF07 | FUNC(3))
+#define GPF07_VEN_DATA3 (GPF07 | FUNC(4))
+
+/*
+ * Group F1: GPIO 0...7
+ */
+#define GPF10 (PIN(10,0) | PUD)
+#define GPF10_GPIO (GPF10 | FUNC(0))
+#define GPF10_LCD_VD4 (GPF10 | FUNC(2))
+#define GPF10_SYS_VD4 (GPF10 | FUNC(3))
+#define GPF10_VEN_DATA4 (GPF10 | FUNC(4))
+#define GPF11 (PIN(10,1) | PUD)
+#define GPF11_GPIO (GPF11 | FUNC(0))
+#define GPF11_LCD_VD5 (GPF11 | FUNC(2))
+#define GPF11_SYS_VD5 (GPF11 | FUNC(3))
+#define GPF11_VEN_DATA5 (GPF11 | FUNC(4))
+#define GPF12 (PIN(10,2) | PUD)
+#define GPF12_GPIO (GPF12 | FUNC(0))
+#define GPF12_LCD_VD6 (GPF12 | FUNC(2))
+#define GPF12_SYS_VD6 (GPF12 | FUNC(3))
+#define GPF12_VEN_DATA6 (GPF12 | FUNC(4))
+#define GPF13 (PIN(10,3) | PUD)
+#define GPF13_GPIO (GPF13 | FUNC(0))
+#define GPF13_LCD_VD7 (GPF13 | FUNC(2))
+#define GPF13_SYS_VD7 (GPF13 | FUNC(3))
+#define GPF13_VEN_DATA7 (GPF13 | FUNC(4))
+#define GPF14 (PIN(10,4) | PUD)
+#define GPF14_GPIO (GPF14 | FUNC(0))
+#define GPF14_LCD_VD8 (GPF14 | FUNC(2))
+#define GPF14_SYS_VD8 (GPF14 | FUNC(3))
+#define GPF14_V656_DATA0 (GPF14 | FUNC(4))
+#define GPF15 (PIN(10,5) | PUD)
+#define GPF15_GPIO (GPF15 | FUNC(0))
+#define GPF15_LCD_VD9 (GPF15 | FUNC(2))
+#define GPF15_SYS_VD9 (GPF15 | FUNC(3))
+#define GPF15_V656_DATA1 (GPF15 | FUNC(4))
+#define GPF16 (PIN(10,6) | PUD)
+#define GPF16_GPIO (GPF16 | FUNC(0))
+#define GPF16_LCD_VD10 (GPF16 | FUNC(2))
+#define GPF16_SYS_VD10 (GPF16 | FUNC(3))
+#define GPF16_V656_DATA2 (GPF16 | FUNC(4))
+#define GPF17 (PIN(10,7) | PUD)
+#define GPF17_GPIO (GPF17 | FUNC(0))
+#define GPF17_LCD_VD11 (GPF17 | FUNC(2))
+#define GPF17_SYS_VD11 (GPF17 | FUNC(3))
+#define GPF17_V656_DATA3 (GPF17 | FUNC(4))
+
+/*
+ * Group F2: GPIO 0...7
+ */
+#define GPF20 (PIN(11,0) | PUD)
+#define GPF20_GPIO (GPF20 | FUNC(0))
+#define GPF20_LCD_VD_12 (GPF20 | FUNC(2))
+#define GPF20_SYS_VD_12 (GPF20 | FUNC(3))
+#define GPF20_V656_DATA_4 (GPF20 | FUNC(4))
+#define GPF21 (PIN(11,1) | PUD)
+#define GPF21_GPIO (GPF21 | FUNC(0))
+#define GPF21_LCD_VD_13 (GPF21 | FUNC(2))
+#define GPF21_SYS_VD_13 (GPF21 | FUNC(3))
+#define GPF21_V656_DATA_5 (GPF21 | FUNC(4))
+#define GPF22 (PIN(11,2) | PUD)
+#define GPF22_GPIO (GPF22 | FUNC(0))
+#define GPF22_LCD_VD_14 (GPF22 | FUNC(2))
+#define GPF22_SYS_VD_14 (GPF22 | FUNC(3))
+#define GPF22_V656_DATA_6 (GPF22 | FUNC(4))
+#define GPF23 (PIN(11,3) | PUD)
+#define GPF23_GPIO (GPF23 | FUNC(0))
+#define GPF23_LCD_VD_15 (GPF23 | FUNC(2))
+#define GPF23_SYS_VD_15 (GPF23 | FUNC(3))
+#define GPF23_V656_DATA_7 (GPF23 | FUNC(4))
+#define GPF24 (PIN(11,4) | PUD)
+#define GPF24_GPIO (GPF24 | FUNC(0))
+#define GPF24_LCD_VD_16 (GPF24 | FUNC(2))
+#define GPF24_SYS_VD_16 (GPF24 | FUNC(3))
+#define GPF25 (PIN(11,5) | PUD)
+#define GPF25_GPIO (GPF25 | FUNC(0))
+#define GPF25_LCD_VD_17 (GPF25 | FUNC(2))
+#define GPF25_SYS_VD_17 (GPF25 | FUNC(3))
+#define GPF26 (PIN(11,6) | PUD)
+#define GPF26_GPIO (GPF26 | FUNC(0))
+#define GPF26_LCD_VD_18 (GPF26 | FUNC(2))
+#define GPF26_SYS_VD_18 (GPF26 | FUNC(3))
+#define GPF27 (PIN(11,7) | PUD)
+#define GPF27_GPIO (GPF27 | FUNC(0))
+#define GPF27_LCD_VD_19 (GPF27 | FUNC(2))
+#define GPF27_SYS_VD_19 (GPF27 | FUNC(3))
+
+/*
+ * Group F3: GPIO 0...5
+ */
+#define GPF30 (PIN(12,0) | PUD)
+#define GPF30_GPIO (GPF30 | FUNC(0))
+#define GPF30_LCD_VD20 (GPF30 | FUNC(2))
+#define GPF30_SYS_VD20 (GPF30 | FUNC(3))
+#define GPF31 (PIN(12,1) | PUD)
+#define GPF31_GPIO (GPF31 | FUNC(0))
+#define GPF31_LCD_VD21 (GPF31 | FUNC(2))
+#define GPF31_SYS_VD21 (GPF31 | FUNC(3))
+#define GPF32 (PIN(12,2) | PUD)
+#define GPF32_GPIO (GPF32 | FUNC(0))
+#define GPF32_LCD_VD22 (GPF32 | FUNC(2))
+#define GPF32_SYS_VD22 (GPF32 | FUNC(3))
+#define GPF33 (PIN(12,3) | PUD)
+#define GPF33_GPIO (GPF33 | FUNC(0))
+#define GPF33_LCD_VD23 (GPF33 | FUNC(2))
+#define GPF33_SYS_VD23 (GPF33 | FUNC(3))
+#define GPF33_V656_CLK (GPF33 | FUNC(4))
+#define GPF34 (PIN(12,4) | PUD)
+#define GPF34_GPIO (GPF34 | FUNC(0))
+#define GPF34_VSYNC_LDI (GPF34 | FUNC(3))
+#define GPF35 (PIN(12,5) | PUD)
+#define GPF35_GPIO (GPF35 | FUNC(0))
+#define GPF35_SYS_OE (GPF35 | FUNC(3))
+#define GPF35_VEN_FIELD (GPF35 | FUNC(4))
+
+/*
+ * Group G0: GPIO 0...6
+ */
+#define GPG00 (PIN(13,0) | PUD)
+#define GPG00_GPIO (GPG00 | FUNC(0))
+#define GPG00_SD0_CLK (GPG00 | FUNC(2))
+#define GPG01 (PIN(13,1) | PUD)
+#define GPG01_GPIO (GPG01 | FUNC(0))
+#define GPG01_SD0_CMD (GPG01 | FUNC(2))
+#define GPG02 (PIN(13,2) | PUD)
+#define GPG02_GPIO (GPG02 | FUNC(0))
+#define GPG02_SD0_NCD (GPG02 | FUNC(2))
+#define GPG03 (PIN(13,3) | PUD)
+#define GPG03_GPIO (GPG03 | FUNC(0))
+#define GPG03_SD0_DATA0 (GPG03 | FUNC(2))
+#define GPG04 (PIN(13,4) | PUD)
+#define GPG04_GPIO (GPG04 | FUNC(0))
+#define GPG04_SD0_DATA1 (GPG04 | FUNC(2))
+#define GPG05 (PIN(13,5) | PUD)
+#define GPG05_GPIO (GPG05 | FUNC(0))
+#define GPG05_SD0_DATA2 (GPG05 | FUNC(2))
+#define GPG06 (PIN(13,6) | PUD)
+#define GPG06_GPIO (GPG06 | FUNC(0))
+#define GPG06_SD0_DATA3 (GPG06 | FUNC(2))
+
+/*
+ * Group G1: GPIO 0...6
+ */
+#define GPG10 (PIN(14,0) | PUD)
+#define GPG10_GPIO (GPG10 | FUNC(0))
+#define GPG10_SD1_CLK (GPG10 | FUNC(2))
+#define GPG11 (PIN(14,1) | PUD)
+#define GPG11_GPIO (GPG11 | FUNC(0))
+#define GPG11_SD1_CMD (GPG11 | FUNC(2))
+#define GPG12 (PIN(14,2) | PUD)
+#define GPG12_GPIO (GPG12 | FUNC(0))
+#define GPG12_SD1_NCD (GPG12 | FUNC(2))
+#define GPG13 (PIN(14,3) | PUD)
+#define GPG13_GPIO (GPG13 | FUNC(0))
+#define GPG13_SD1_DATA0 (GPG13 | FUNC(2))
+#define GPG13_SD0_DATA4 (GPG13 | FUNC(3))
+#define GPG14 (PIN(14,4) | PUD)
+#define GPG14_GPIO (GPG14 | FUNC(0))
+#define GPG14_SD1_DATA1 (GPG14 | FUNC(2))
+#define GPG14_SD0_DATA5 (GPG14 | FUNC(3))
+#define GPG15 (PIN(14,5) | PUD)
+#define GPG15_GPIO (GPG15 | FUNC(0))
+#define GPG15_SD1_DATA2 (GPG15 | FUNC(2))
+#define GPG15_SD0_DATA6 (GPG15 | FUNC(3))
+#define GPG16 (PIN(14,6) | PUD)
+#define GPG16_GPIO (GPG16 | FUNC(0))
+#define GPG16_SD1_DATA3 (GPG16 | FUNC(2))
+#define GPG16_SD0_DATA7 (GPG16 | FUNC(3))
+
+/*
+ * Group G2: GPIO 0...6
+ */
+#define GPG20 (PIN(15,0) | PUD)
+#define GPG20_GPIO (GPG20 | FUNC(0))
+#define GPG20_SD2_CLK (GPG20 | FUNC(2))
+#define GPG21 (PIN(15,1) | PUD)
+#define GPG21_GPIO (GPG21 | FUNC(0))
+#define GPG21_SD2_CMD (GPG21 | FUNC(2))
+#define GPG22 (PIN(15,2) | PUD)
+#define GPG22_GPIO (GPG22 | FUNC(0))
+#define GPG22_SD2_NCD (GPG22 | FUNC(2))
+#define GPG23 (PIN(15,3) | PUD)
+#define GPG23_GPIO (GPG23 | FUNC(0))
+#define GPG23_SD2_DATA0 (GPG23 | FUNC(2))
+#define GPG24 (PIN(15,4) | PUD)
+#define GPG24_GPIO (GPG24 | FUNC(0))
+#define GPG24_SD2_DATA1 (GPG24 | FUNC(2))
+#define GPG25 (PIN(15,5) | PUD)
+#define GPG25_GPIO (GPG25 | FUNC(0))
+#define GPG25_SD2_DATA2 (GPG25 | FUNC(2))
+#define GPG26 (PIN(15,6) | PUD)
+#define GPG26_GPIO (GPG26 | FUNC(0))
+#define GPG26_SD2_DATA3 (GPG26 | FUNC(2))
+
+/*
+ * Group G3: GPIO 0...6
+ */
+#define GPG30 (PIN(16,0) | PUD)
+#define GPG30_GPIO (GPG30 | FUNC(0))
+#define GPG30_SD3_CLK (GPG30 | FUNC(2))
+#define GPG31 (PIN(16,1) | PUD)
+#define GPG31_GPIO (GPG31 | FUNC(0))
+#define GPG31_SD3_CMD (GPG31 | FUNC(2))
+#define GPG32 (PIN(16,2) | PUD)
+#define GPG32_GPIO (GPG32 | FUNC(0))
+#define GPG32_SD3_NCD (GPG32 | FUNC(2))
+#define GPG33 (PIN(16,3) | PUD)
+#define GPG33_GPIO (GPG33 | FUNC(0))
+#define GPG33_SD3_DATA0 (GPG33 | FUNC(2))
+#define GPG33_SD2_DATA4 (GPG33 | FUNC(3))
+#define GPG34 (PIN(16,4) | PUD)
+#define GPG34_GPIO (GPG34 | FUNC(0))
+#define GPG34_SD3_DATA1 (GPG34 | FUNC(2))
+#define GPG34_SD2_DATA5 (GPG34 | FUNC(3))
+#define GPG35 (PIN(16,5) | PUD)
+#define GPG35_GPIO (GPG35 | FUNC(0))
+#define GPG35_SD3_DATA2 (GPG35 | FUNC(2))
+#define GPG35_SD2_DATA6 (GPG35 | FUNC(3))
+#define GPG36 (PIN(16,6) | PUD)
+#define GPG36_GPIO (GPG36 | FUNC(0))
+#define GPG36_SD3_DATA3 (GPG36 | FUNC(2))
+#define GPG36_SD2_DATA7 (GPG36 | FUNC(3))
+
+/*
+ * Group I - no GPIO
+ */
+#define GPI0 (PIN(17,0) | PUD)
+#define GPI0_I2S0_SCLK (GPI0 | FUNC(2))
+#define GPI0_PCM0_SCLK (GPI0 | FUNC(3))
+#define GPI1 (PIN(17,1) | PUD)
+#define GPI1_I2S0_CDCLK (GPI1 | FUNC(2))
+#define GPI1_PCM0_EXTCLK (GPI1 | FUNC(3))
+#define GPI2 (PIN(17,2) | PUD)
+#define GPI2_I2S0_LRCK (GPI2 | FUNC(2))
+#define GPI2_PCM0_FSYNC (GPI2 | FUNC(3))
+#define GPI3 (PIN(17,3) | PUD)
+#define GPI3_I2S0_SDI (GPI3 | FUNC(2))
+#define GPI3_PCM0_SIN (GPI3 | FUNC(3))
+#define GPI4 (PIN(17,4) | PUD)
+#define GPI4_I2S0_SDO0 (GPI4 | FUNC(2))
+#define GPI4_PCM0_SOUT (GPI4 | FUNC(3))
+#define GPI5 (PIN(17,5) | PUD)
+#define GPI5_I2S0_SDO1 (GPI5 | FUNC(2))
+#define GPI6 (PIN(17,6) | PUD)
+#define GPI6_I2S0_SDO2 (GPI6 | FUNC(2))
+
+/*
+ * Group J0: GPIO 0...7
+ */
+#define GPJ00 (PIN(18,0) | PUD)
+#define GPJ00_GPIO (GPJ00 | FUNC(0))
+#define GPJ00_MSM_ADDR0 (GPJ00 | FUNC(2))
+#define GPJ00_CAM_B_DATA0 (GPJ00 | FUNC(3))
+#define GPJ00_CF_ADDR0 (GPJ00 | FUNC(4))
+#define GPJ00_MIPI_BYTE_CLK (GPJ00 | FUNC(5))
+#define GPJ01 (PIN(18,1) | PUD)
+#define GPJ01_GPIO (GPJ01 | FUNC(0))
+#define GPJ01_MSM_ADDR1 (GPJ01 | FUNC(2))
+#define GPJ01_CAM_B_DATA1 (GPJ01 | FUNC(3))
+#define GPJ01_CF_ADDR1 (GPJ01 | FUNC(4))
+#define GPJ01_MIPI_ESC_CLK (GPJ01 | FUNC(5))
+#define GPJ02 (PIN(18,2) | PUD)
+#define GPJ02_GPIO (GPJ02 | FUNC(0))
+#define GPJ02_MSM_ADDR2 (GPJ02 | FUNC(2))
+#define GPJ02_CAM_B_DATA2 (GPJ02 | FUNC(3))
+#define GPJ02_CF_ADDR2 (GPJ02 | FUNC(4))
+#define GPJ02_TS_CLK (GPJ02 | FUNC(5))
+#define GPJ03 (PIN(18,3) | PUD)
+#define GPJ03_GPIO (GPJ03 | FUNC(0))
+#define GPJ03_MSM_ADDR3 (GPJ03 | FUNC(2))
+#define GPJ03_CAM_B_DATA3 (GPJ03 | FUNC(3))
+#define GPJ03_CF_IORDY (GPJ03 | FUNC(4))
+#define GPJ03_TS_SYNC (GPJ03 | FUNC(5))
+#define GPJ04 (PIN(18,4) | PUD)
+#define GPJ04_GPIO (GPJ04 | FUNC(0))
+#define GPJ04_MSM_ADDR4 (GPJ04 | FUNC(2))
+#define GPJ04_CAM_B_DATA4 (GPJ04 | FUNC(3))
+#define GPJ04_CF_INTRQ (GPJ04 | FUNC(4))
+#define GPJ04_TS_VAL (GPJ04 | FUNC(5))
+#define GPJ05 (PIN(18,5) | PUD)
+#define GPJ05_GPIO (GPJ05 | FUNC(0))
+#define GPJ05_MSM_ADDR5 (GPJ05 | FUNC(2))
+#define GPJ05_CAM_B_DATA5 (GPJ05 | FUNC(3))
+#define GPJ05_CF_DMARQ (GPJ05 | FUNC(4))
+#define GPJ05_TS_DATA (GPJ05 | FUNC(5))
+#define GPJ06 (PIN(18,6) | PUD)
+#define GPJ06_GPIO (GPJ06 | FUNC(0))
+#define GPJ06_MSM_ADDR6 (GPJ06 | FUNC(2))
+#define GPJ06_CAM_B_DATA6 (GPJ06 | FUNC(3))
+#define GPJ06_CF_NDRESET (GPJ06 | FUNC(4))
+#define GPJ06_TS_ERROR (GPJ06 | FUNC(5))
+#define GPJ07 (PIN(18,7) | PUD)
+#define GPJ07_GPIO (GPJ07 | FUNC(0))
+#define GPJ07_MSM_ADDR7 (GPJ07 | FUNC(2))
+#define GPJ07_CAM_B_DATA7 (GPJ07 | FUNC(3))
+#define GPJ07_CF_NDMACK (GPJ07 | FUNC(4))
+#define GPJ07_MHL_D0 (GPJ07 | FUNC(5))
+
+/*
+ * Group J1: GPIO 0...5
+ */
+#define GPJ10 (PIN(19,0) | PUD)
+#define GPJ10_GPIO (GPJ10 | FUNC(0))
+#define GPJ10_MSM_ADDR8 (GPJ10 | FUNC(2))
+#define GPJ10_CAM_B_PCLK (GPJ10 | FUNC(3))
+#define GPJ10_SROM_ADDR_16to220 (GPJ10 | FUNC(4))
+#define GPJ10_MHL_D1 (GPJ10 | FUNC(5))
+#define GPJ11 (PIN(19,1) | PUD)
+#define GPJ11_GPIO (GPJ11 | FUNC(0))
+#define GPJ11_MSM_ADDR9 (GPJ11 | FUNC(2))
+#define GPJ11_CAM_B_VSYNC (GPJ11 | FUNC(3))
+#define GPJ11_SROM_ADDR_16to221 (GPJ11 | FUNC(4))
+#define GPJ11_MHL_D2 (GPJ11 | FUNC(5))
+#define GPJ12 (PIN(19,2) | PUD)
+#define GPJ12_GPIO (GPJ12 | FUNC(0))
+#define GPJ12_MSM_ADDR10 (GPJ12 | FUNC(2))
+#define GPJ12_CAM_B_HREF (GPJ12 | FUNC(3))
+#define GPJ12_SROM_ADDR_16to222 (GPJ12 | FUNC(4))
+#define GPJ12_MHL_D3 (GPJ12 | FUNC(5))
+#define GPJ13 (PIN(19,3) | PUD)
+#define GPJ13_GPIO (GPJ13 | FUNC(0))
+#define GPJ13_MSM_ADDR11 (GPJ13 | FUNC(2))
+#define GPJ13_CAM_B_FIELD (GPJ13 | FUNC(3))
+#define GPJ13_SROM_ADDR_16to223 (GPJ13 | FUNC(4))
+#define GPJ13_MHL_D4 (GPJ13 | FUNC(5))
+#define GPJ14 (PIN(19,4) | PUD)
+#define GPJ14_GPIO (GPJ14 | FUNC(0))
+#define GPJ14_MSM_ADDR12 (GPJ14 | FUNC(2))
+#define GPJ14_CAM_B_CLKOUT (GPJ14 | FUNC(3))
+#define GPJ14_SROM_ADDR_16to224 (GPJ14 | FUNC(4))
+#define GPJ14_MHL_D5 (GPJ14 | FUNC(5))
+#define GPJ15 (PIN(19,5) | PUD)
+#define GPJ15_GPIO (GPJ15 | FUNC(0))
+#define GPJ15_MSM_ADDR13 (GPJ15 | FUNC(2))
+#define GPJ15_KP_COL0 (GPJ15 | FUNC(3))
+#define GPJ15_SROM_ADDR_16to225 (GPJ15 | FUNC(4))
+#define GPJ15_MHL_D6 (GPJ15 | FUNC(5))
+
+/*
+ * Group J2: GPIO 0...7
+ */
+#define GPJ20 (PIN(20,0) | PUD)
+#define GPJ20_GPIO (GPJ20 | FUNC(0))
+#define GPJ20_MSM_DATA0 (GPJ20 | FUNC(2))
+#define GPJ20_KP_COL1 (GPJ20 | FUNC(3))
+#define GPJ20_CF_DATA0 (GPJ20 | FUNC(4))
+#define GPJ20_MHL_D7 (GPJ20 | FUNC(5))
+#define GPJ21 (PIN(20,1) | PUD)
+#define GPJ21_GPIO (GPJ21 | FUNC(0))
+#define GPJ21_MSM_DATA1 (GPJ21 | FUNC(2))
+#define GPJ21_KP_COL2 (GPJ21 | FUNC(3))
+#define GPJ21_CF_DATA1 (GPJ21 | FUNC(4))
+#define GPJ21_MHL_D8 (GPJ21 | FUNC(5))
+#define GPJ22 (PIN(20,2) | PUD)
+#define GPJ22_GPIO (GPJ22 | FUNC(0))
+#define GPJ22_MSM_DATA2 (GPJ22 | FUNC(2))
+#define GPJ22_KP_COL3 (GPJ22 | FUNC(3))
+#define GPJ22_CF_DATA2 (GPJ22 | FUNC(4))
+#define GPJ22_MHL_D9 (GPJ22 | FUNC(5))
+#define GPJ23 (PIN(20,3) | PUD)
+#define GPJ23_GPIO (GPJ23 | FUNC(0))
+#define GPJ23_MSM_DATA3 (GPJ23 | FUNC(2))
+#define GPJ23_KP_COL4 (GPJ23 | FUNC(3))
+#define GPJ23_CF_DATA3 (GPJ23 | FUNC(4))
+#define GPJ23_MHL_D10 (GPJ23 | FUNC(5))
+#define GPJ24 (PIN(20,4) | PUD)
+#define GPJ24_GPIO (GPJ24 | FUNC(0))
+#define GPJ24_MSM_DATA4 (GPJ24 | FUNC(2))
+#define GPJ24_KP_COL5 (GPJ24 | FUNC(3))
+#define GPJ24_CF_DATA4 (GPJ24 | FUNC(4))
+#define GPJ24_MHL_D11 (GPJ24 | FUNC(5))
+#define GPJ25 (PIN(20,5) | PUD)
+#define GPJ25_GPIO (GPJ25 | FUNC(0))
+#define GPJ25_MSM_DATA5 (GPJ25 | FUNC(2))
+#define GPJ25_KP_COL6 (GPJ25 | FUNC(3))
+#define GPJ25_CF_DATA5 (GPJ25 | FUNC(4))
+#define GPJ25_MHL_D12 (GPJ25 | FUNC(5))
+#define GPJ26 (PIN(20,6) | PUD)
+#define GPJ26_GPIO (GPJ26 | FUNC(0))
+#define GPJ26_MSM_DATA6 (GPJ26 | FUNC(2))
+#define GPJ26_KP_COL7 (GPJ26 | FUNC(3))
+#define GPJ26_CF_DATA6 (GPJ26 | FUNC(4))
+#define GPJ26_MHL_D13 (GPJ26 | FUNC(5))
+#define GPJ27 (PIN(20,7) | PUD)
+#define GPJ27_GPIO (GPJ27 | FUNC(0))
+#define GPJ27_MSM_DATA7 (GPJ27 | FUNC(2))
+#define GPJ27_KP_ROW0 (GPJ27 | FUNC(3))
+#define GPJ27_CF_DATA7 (GPJ27 | FUNC(4))
+#define GPJ27_MHL_D14 (GPJ27 | FUNC(5))
+
+/*
+ * Group J3: GPIO 0...7
+ */
+#define GPJ30 (PIN(21,0) | PUD)
+#define GPJ30_GPIO (GPJ30 | FUNC(0))
+#define GPJ30_MSM_DATA8 (GPJ30 | FUNC(2))
+#define GPJ30_KP_ROW1 (GPJ30 | FUNC(3))
+#define GPJ30_CF_DATA8 (GPJ30 | FUNC(4))
+#define GPJ30_MHL_D15 (GPJ30 | FUNC(5))
+#define GPJ31 (PIN(21,1) | PUD)
+#define GPJ31_GPIO (GPJ31 | FUNC(0))
+#define GPJ31_MSM_DATA9 (GPJ31 | FUNC(2))
+#define GPJ31_KP_ROW2 (GPJ31 | FUNC(3))
+#define GPJ31_CF_DATA9 (GPJ31 | FUNC(4))
+#define GPJ31_MHL_D16 (GPJ31 | FUNC(5))
+#define GPJ32 (PIN(21,2) | PUD)
+#define GPJ32_GPIO (GPJ32 | FUNC(0))
+#define GPJ32_MSM_DATA10 (GPJ32 | FUNC(2))
+#define GPJ32_KP_ROW3 (GPJ32 | FUNC(3))
+#define GPJ32_CF_DATA10 (GPJ32 | FUNC(4))
+#define GPJ32_MHL_D17 (GPJ32 | FUNC(5))
+#define GPJ33 (PIN(21,3) | PUD)
+#define GPJ33_GPIO (GPJ33 | FUNC(0))
+#define GPJ33_MSM_DATA11 (GPJ33 | FUNC(2))
+#define GPJ33_KP_ROW4 (GPJ33 | FUNC(3))
+#define GPJ33_CF_DATA11 (GPJ33 | FUNC(4))
+#define GPJ33_MHL_D18 (GPJ33 | FUNC(5))
+#define GPJ34 (PIN(21,4) | PUD)
+#define GPJ34_GPIO (GPJ34 | FUNC(0))
+#define GPJ34_MSM_DATA12 (GPJ34 | FUNC(2))
+#define GPJ34_KP_ROW5 (GPJ34 | FUNC(3))
+#define GPJ34_CF_DATA12 (GPJ34 | FUNC(4))
+#define GPJ34_MHL_D19 (GPJ34 | FUNC(5))
+#define GPJ35 (PIN(21,5) | PUD)
+#define GPJ35_GPIO (GPJ35 | FUNC(0))
+#define GPJ35_MSM_DATA13 (GPJ35 | FUNC(2))
+#define GPJ35_KP_ROW6 (GPJ35 | FUNC(3))
+#define GPJ35_CF_DATA13 (GPJ35 | FUNC(4))
+#define GPJ35_MHL_D20 (GPJ35 | FUNC(5))
+#define GPJ36 (PIN(21,6) | PUD)
+#define GPJ36_GPIO (GPJ36 | FUNC(0))
+#define GPJ36_MSM_DATA14 (GPJ36 | FUNC(2))
+#define GPJ36_KP_ROW7 (GPJ36 | FUNC(3))
+#define GPJ36_CF_DATA14 (GPJ36 | FUNC(4))
+#define GPJ36_MHL_D21 (GPJ36 | FUNC(5))
+#define GPJ37 (PIN(21,7) | PUD)
+#define GPJ37_GPIO (GPJ37 | FUNC(0))
+#define GPJ37_MSM_DATA15 (GPJ37 | FUNC(2))
+#define GPJ37_KP_ROW8 (GPJ37 | FUNC(3))
+#define GPJ37_CF_DATA15 (GPJ37 | FUNC(4))
+#define GPJ37_MHL_D22 (GPJ37 | FUNC(5))
+
+/*
+ * Group J4: GPIO 0...4
+ */
+#define GPJ40 (PIN(22,0) | PUD)
+#define GPJ40_GPIO (GPJ40 | FUNC(0))
+#define GPJ40_MSM_NCS (GPJ40 | FUNC(2))
+#define GPJ40_KP_ROW9 (GPJ40 | FUNC(3))
+#define GPJ40_CF_NCS0 (GPJ40 | FUNC(4))
+#define GPJ40_MHL_D23 (GPJ40 | FUNC(5))
+#define GPJ41 (PIN(22,1) | PUD)
+#define GPJ41_GPIO (GPJ41 | FUNC(0))
+#define GPJ41_MSM_NWE (GPJ41 | FUNC(2))
+#define GPJ41_KP_ROW10 (GPJ41 | FUNC(3))
+#define GPJ41_CF_NCS1 (GPJ41 | FUNC(4))
+#define GPJ41_MHL_IDCK (GPJ41 | FUNC(5))
+#define GPJ42 (PIN(22,2) | PUD)
+#define GPJ42_GPIO (GPJ42 | FUNC(0))
+#define GPJ42_MSM_NR (GPJ42 | FUNC(2))
+#define GPJ42_KP_ROW11 (GPJ42 | FUNC(3))
+#define GPJ42_CF_IORN (GPJ42 | FUNC(4))
+#define GPJ42_MHL_IDCK (GPJ42 | FUNC(5))
+#define GPJ43 (PIN(22,3) | PUD)
+#define GPJ43_GPIO (GPJ43 | FUNC(0))
+#define GPJ43_MSM_NIRQ (GPJ43 | FUNC(2))
+#define GPJ43_KP_ROW12 (GPJ43 | FUNC(3))
+#define GPJ43_CF_IOWN (GPJ43 | FUNC(4))
+#define GPJ43_MHL_VSYNC (GPJ43 | FUNC(5))
+#define GPJ44 (PIN(22,4) | PUD)
+#define GPJ44_GPIO (GPJ44 | FUNC(0))
+#define GPJ44_MSM_ADVN (GPJ44 | FUNC(2))
+#define GPJ44_KP_ROW13 (GPJ44 | FUNC(3))
+#define GPJ44_SROM_ADDR_16to226 (GPJ44 | FUNC(4))
+#define GPJ44_MHL_DE (GPJ44 | FUNC(5))
+
+#endif /* __MACH_IOMUX_S5PCXX_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-clocks.h b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
index f4ca8fa..8f9d27b 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-clocks.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
@@ -25,5 +25,8 @@
#ifdef CONFIG_ARCH_S3C24xx
# include <mach/clocks-s3c24x0.h>
#endif
+#ifdef CONFIG_ARCH_S5PCxx
+# include <mach/clocks-s5pcxx.h>
+#endif
#endif /* __MACH_S3C_CLOCKS_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index b1305da..a4d9505 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -22,3 +22,6 @@
#ifdef CONFIG_ARCH_S3C24xx
# include <mach/iomap-s3c24x0.h>
#endif
+#ifdef CONFIG_ARCH_S5PCxx
+# include <mach/iomap-s5pcxx.h>
+#endif
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 4/9] S5PV210 iROM magic boot code
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (2 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only) Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-14 7:51 ` Sascha Hauer
2012-05-13 12:40 ` [PATCH 5/9] S5P DRAM support Alexey Galakhov
` (4 subsequent siblings)
8 siblings, 1 reply; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/Kconfig | 1 +
arch/arm/boards/tiny210/lowlevel.c | 11 +++-
arch/arm/lib/barebox.lds.S | 4 ++
arch/arm/mach-samsung/Kconfig | 1 +
arch/arm/mach-samsung/Makefile | 1 +
arch/arm/mach-samsung/include/mach/s3c-generic.h | 4 ++
arch/arm/mach-samsung/s5p-irom-boot.c | 64 ++++++++++++++++++++++
common/Kconfig | 24 ++++++++
8 files changed, 108 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-samsung/s5p-irom-boot.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f465084..6012a1a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -16,6 +16,7 @@ config ARM
select HAS_MODULES
select HAVE_CONFIGURABLE_MEMORY_LAYOUT
select HAVE_CONFIGURABLE_TEXT_BASE
+ select HAVE_BARE_INIT_PADDING
default y
config ARM_AMBA
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
index 8926fda..fe43565 100644
--- a/arch/arm/boards/tiny210/lowlevel.c
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -23,11 +23,15 @@
#include <init.h>
#include <io.h>
#include <asm/barebox-arm.h>
+#include <asm/sections.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-clocks.h>
+#include <mach/s3c-generic.h>
void __bare_init board_init_lowlevel(void)
{
+ unsigned r;
+
/* TODO: initialize PLL here */
if (get_pc() < 0xD0000000) /* Are we running from iRAM? */
@@ -35,7 +39,10 @@ void __bare_init board_init_lowlevel(void)
/* TODO: initialize DRAM here */
- /* TODO: load barebox to DRAM here */
+ if (! s5p_irom_mmc_load((void*)TEXT_BASE - 16, 1, (barebox_image_size + 16 + 511) / 512))
+ while (1) { } /* hang */
- while (1) { } /* hang */
+ /* Jump to SDRAM */
+ r = (unsigned)TEXT_BASE;
+ __asm__ __volatile__("mov pc, %0" : : "r"(r));
}
diff --git a/arch/arm/lib/barebox.lds.S b/arch/arm/lib/barebox.lds.S
index 3fd271b..4d02eda 100644
--- a/arch/arm/lib/barebox.lds.S
+++ b/arch/arm/lib/barebox.lds.S
@@ -49,6 +49,10 @@ SECTIONS
__bare_init_start = .;
*(.text_bare_init*)
__bare_init_end = .;
+#ifdef CONFIG_BAREBOX_BARE_INIT_PADDING
+ . = (. + (CONFIG_BAREBOX_BARE_INIT_PADDING_SIZE));
+ . = ALIGN(CONFIG_BAREBOX_BARE_INIT_PADDING_ALIGN);
+#endif
__exceptions_start = .;
KEEP(*(.text_exceptions*))
__exceptions_stop = .;
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index fcef677..183b84d 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -98,6 +98,7 @@ config MACH_TINY210
select CPU_S5PV210
select MACH_HAS_LOWLEVEL_INIT
select MACH_DO_LOWLEVEL_INIT
+ select BAREBOX_BARE_INIT_PADDING
endchoice
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 66f3fd2..0123743 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -2,4 +2,5 @@ obj-y += s3c-timer.o generic.o
obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o
+obj-$(CONFIG_ARCH_S5PCxx) += s5p-irom-boot.o
obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 62d2c93..d6d1a3e 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -38,3 +38,7 @@ uint32_t s3c_get_memory_size(void);
#ifdef CONFIG_ARCH_S3C24xx
void s3c24xx_disable_second_sdram_bank(void);
#endif
+
+#ifdef CONFIG_ARCH_S5PCxx
+int s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count);
+#endif
diff --git a/arch/arm/mach-samsung/s5p-irom-boot.c b/arch/arm/mach-samsung/s5p-irom-boot.c
new file mode 100644
index 0000000..8fa0de4
--- /dev/null
+++ b/arch/arm/mach-samsung/s5p-irom-boot.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <mach/s3c-generic.h>
+
+/*
+ * These magical address values are from u-boot
+ * Not sure what they really mean but they work
+ */
+#if 1 /* S5PV210 and other CPUs */
+# define MADDR_CH 0xD0037488
+# define MADDR_CP 0xD0037F98
+#else /* not sure when, some older CPUs */
+# define MADDR_CH 0xD003A508
+# define MADDR_CP 0xD003E008
+#endif
+
+typedef uint32_t (*mmc2mem_func)
+(uint32_t channel, uint32_t start_block, uint16_t block_count, uint32_t *dest, uint32_t init);
+
+/*
+ * Call to the magical iROM code present on S5P CPUs
+ * Block seems to be 512 bytes
+ */
+int __bare_init s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count)
+{
+ uint32_t ret;
+ uint32_t chan;
+ uint32_t ch = *(volatile uint32_t*)(MADDR_CH);
+ mmc2mem_func cp_func = (mmc2mem_func)(*(uint32_t*)(MADDR_CP));
+ switch (ch)
+ {
+ case 0xEB000000:
+ chan = 0;
+ break;
+ case 0xEB200000:
+ chan = 2;
+ break;
+ default:
+ return 0;
+ }
+
+ ret = cp_func(chan, start_block, block_count, (uint32_t*)dest, 0);
+ if (ret == 0)
+ return 0; /* error */
+ return 1;
+}
diff --git a/common/Kconfig b/common/Kconfig
index 73d620a..199268e 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -124,6 +124,30 @@ config BAREBOX_MAX_BARE_INIT_SIZE
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
+config HAVE_BARE_INIT_PADDING
+ bool
+
+config BAREBOX_BARE_INIT_PADDING
+ depends on HAVE_BARE_INIT_PADDING
+ bool "Enable bare_init tail padding"
+ default n
+ help
+ Some architectures require that 1st stage loader is padded
+ with zeroes. This will add zero padding at the end of
+ bare_init block. If unsure, say n.
+
+config BAREBOX_BARE_INIT_PADDING_SIZE
+ depends on BAREBOX_BARE_INIT_PADDING
+ prompt "Minimal bare_init padding size"
+ hex
+ default 0x4
+
+config BAREBOX_BARE_INIT_PADDING_ALIGN
+ depends on BAREBOX_BARE_INIT_PADDING
+ prompt "bare_init end alignment"
+ hex
+ default 0x200
+
config HAVE_CONFIGURABLE_MEMORY_LAYOUT
bool
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 5/9] S5P DRAM support
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (3 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 4/9] S5PV210 iROM magic boot code Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 6/9] S5P lowlevel clock init Alexey Galakhov
` (3 subsequent siblings)
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/boards/tiny210/config.h | 9 +
arch/arm/boards/tiny210/lowlevel.c | 4 +-
arch/arm/boards/tiny210/tiny210.c | 2 +-
arch/arm/mach-samsung/Makefile | 2 +-
arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 3 +
arch/arm/mach-samsung/include/mach/s3c-generic.h | 1 +
arch/arm/mach-samsung/mem-s5pcxx.c | 260 +++++++++++++++++++++
7 files changed, 278 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-samsung/mem-s5pcxx.c
diff --git a/arch/arm/boards/tiny210/config.h b/arch/arm/boards/tiny210/config.h
index ebf661e..83cb0b4 100644
--- a/arch/arm/boards/tiny210/config.h
+++ b/arch/arm/boards/tiny210/config.h
@@ -1 +1,10 @@
#define S5PCXX_CLOCK_REFERENCE 24000000
+
+#define S5P_DRAM_DDR2
+
+#define S5P_DRAM_WR 3
+#define S5P_DRAM_CAS 4
+#define DMC_TIMING_AREF 0x00000618
+#define DMC_TIMING_ROW 0x2B34438A
+#define DMC_TIMING_DATA 0x24240000
+#define DMC_TIMING_PWR 0x0BDC0343
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
index fe43565..dcf4091 100644
--- a/arch/arm/boards/tiny210/lowlevel.c
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -37,7 +37,9 @@ void __bare_init board_init_lowlevel(void)
if (get_pc() < 0xD0000000) /* Are we running from iRAM? */
return; /* No, we don't. */
- /* TODO: initialize DRAM here */
+#ifdef CONFIG_S3C_SDRAM_INIT
+ s5p_init_dram_bank(S5P_DMC0_BASE, 0x20E00323, 0);
+#endif
if (! s5p_irom_mmc_load((void*)TEXT_BASE - 16, 1, (barebox_image_size + 16 + 511) / 512))
while (1) { } /* hang */
diff --git a/arch/arm/boards/tiny210/tiny210.c b/arch/arm/boards/tiny210/tiny210.c
index eb23196..f3a5d33 100644
--- a/arch/arm/boards/tiny210/tiny210.c
+++ b/arch/arm/boards/tiny210/tiny210.c
@@ -70,7 +70,7 @@ static struct gpio_led leds[] = {
static int tiny210_mem_init(void)
{
- arm_add_mem_device("ram0", S3C_SDRAM_BASE, (512 << 20));
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c_get_memory_size());
return 0;
}
mem_initcall(tiny210_mem_init);
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 0123743..ac59d7b 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,6 +1,6 @@
obj-y += s3c-timer.o generic.o
obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
-obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o
+obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o mem-s5pcxx.o
obj-$(CONFIG_ARCH_S5PCxx) += s5p-irom-boot.o
obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h b/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
index cb05527..248f868 100644
--- a/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
+++ b/arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
@@ -47,3 +47,6 @@
#define S3C_UART3_SIZE 0x400
#define S3C_UART_HAS_UBRDIVSLOT
#define S3C_UART_HAS_UINTM
+
+#define S5P_DMC0_BASE 0xF0000000
+#define S5P_DMC1_BASE 0xF1400000
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index d6d1a3e..381ad7b 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -40,5 +40,6 @@ void s3c24xx_disable_second_sdram_bank(void);
#endif
#ifdef CONFIG_ARCH_S5PCxx
+void s5p_init_dram_bank(uint32_t base, uint32_t mc0, uint32_t mc1);
int s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count);
#endif
diff --git a/arch/arm/mach-samsung/mem-s5pcxx.c b/arch/arm/mach-samsung/mem-s5pcxx.c
new file mode 100644
index 0000000..f3d325a
--- /dev/null
+++ b/arch/arm/mach-samsung/mem-s5pcxx.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <io.h>
+#include <init.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-iomap.h>
+
+#define S5P_DMC_CONCONTROL 0x00
+#define S5P_DMC_MEMCONTROL 0x04
+#define S5P_DMC_MEMCONFIG0 0x08
+#define S5P_DMC_MEMCONFIG1 0x0C
+#define S5P_DMC_DIRECTCMD 0x10
+#define S5P_DMC_PRECHCONFIG 0x14
+#define S5P_DMC_PHYCONTROL0 0x18
+#define S5P_DMC_PHYCONTROL1 0x1C
+#define S5P_DMC_PWRDNCONFIG 0x28
+#define S5P_DMC_TIMINGAREF 0x30
+#define S5P_DMC_TIMINGROW 0x34
+#define S5P_DMC_TIMINGDATA 0x38
+#define S5P_DMC_TIMINGPOWER 0x3C
+#define S5P_DMC_PHYSTATUS 0x40
+
+/* DRAM commands */
+#define CMD(x) ((x) << 24)
+#define BANK(x) ((x) << 16)
+#define CHIP(x) ((x) << 20)
+#define ADDR(x) (x)
+
+/**
+ * MR definition:
+ * 1 11
+ * 2 1098 7654 3210
+ * | | ^^^- burst length, 010=4, 011=8
+ * | | ^- burst type 0=sequnential, 1=interleaved
+ * | ^^^-- CAS latency
+ * | ^----- test, 0=normal, 1=test
+ * |^---- DLL reset, 1=yes
+ * ^^^----- WR, 1=2, 2=3 etc.
+ * ^------- PD, 0=fast exit, 1=low power
+ *
+ * EMR1 definition:
+ * 1 11
+ * 2 1098 7654 3210
+ * | ^- DLL, 0=enable
+ * | ^-- output strength, 0=full, 1=reduced
+ * |^.. .^--- Rtt, 00=off, 01=75, 10=150, 11=50 Ohm
+ * | ^^ ^-- Posted CAS# AL, 0-6
+ * ^^ ^------ OCD: 000=OCD exit, 111=enable defaults
+ * ^------ DQS#, 0=enable, 1=disable
+ * ^------- RDQS enable, 0=no, 1=yes
+ * ^-------- outputs, 0=enabled, 1=disabled
+ *
+ * EMR2 definition:
+ * bit 7
+ * 1 1
+ * 2 1098 7654 3210
+ * ^-- SRT, 0=1x (0-85 deg.C), 1=2x (>85 deg.C)
+ * all other bits = 0
+ *
+ * EMR3 definition: all bits 0
+ */
+
+#define MRS CMD(0x0)
+#define PALL CMD(0x1)
+#define PRE CMD(0x2)
+#define DPD CMD(0x3)
+#define REFS CMD(0x4)
+#define REFA CMD(0x5)
+#define CKEL CMD(0x6)
+#define NOP CMD(0x7)
+#define REFSX CMD(0x8)
+#define MRR CMD(0x9)
+
+#define EMRS1 (MRS | BANK(1))
+#define EMRS2 (MRS | BANK(2))
+#define EMRS3 (MRS | BANK(3))
+
+/* Burst is (1 << S5P_DRAM_BURST), i.e. S5P_DRAM_BURST=2 for burst 4 */
+#ifndef S5P_DRAM_BURST
+/* (LP)DDR2 supports burst 4 only, make it default */
+# define S5P_DRAM_BURST 2
+#endif
+
+/**
+ * Initialization sequences for different kinds of DRAM
+ */
+#define dcmd(x) writel((x) | CHIP(chip), base + S5P_DMC_DIRECTCMD)
+
+/* TODO: LPDDR and LPDDR2 */
+
+#ifdef S5P_DRAM_DDR2
+static void __bare_init init_seq(uint32_t base, unsigned chip)
+{
+ const uint32_t emr = 0x400; /* DQS disable */
+ const uint32_t mr = (((S5P_DRAM_WR) - 1) << 9)
+ | ((S5P_DRAM_CAS) << 4)
+ | (S5P_DRAM_BURST);
+ dcmd(NOP);
+ /* FIXME wait here? */
+ dcmd(PALL); dcmd(EMRS2); dcmd(EMRS3);
+ dcmd(EMRS1 | ADDR(emr)); /* DQS disable */
+ dcmd(MRS | ADDR(mr | 0x100)); /* DLL reset */
+ dcmd(PALL); dcmd(REFA); dcmd(REFA);
+ dcmd(MRS | ADDR(mr)); /* DLL no reset */
+ dcmd(EMRS1 | ADDR(emr | 0x380)); /* OCD defaults */
+ dcmd(EMRS1 | ADDR(emr)); /* OCD exit */
+}
+#endif
+
+#undef dcmd
+
+
+static inline void __bare_init start_dll(uint32_t base)
+{
+ uint32_t pc0 = 0x00101000; /* the only legal initial value */
+ uint32_t lv;
+ /* Init DLL */
+ writel(pc0, base + S5P_DMC_PHYCONTROL0);
+#ifdef S5P_DRAM_DDR2
+ /* refcount 8, 180 deg. shift */
+ writel(0x00000086, base + S5P_DMC_PHYCONTROL1);
+#else
+ /* refcount 8, 90 deg. shift */
+ writel(0x00000085, base + S5P_DMC_PHYCONTROL1);
+#endif
+ /* DLL on */
+ pc0 |= 0x2;
+ writel(pc0, base + S5P_DMC_PHYCONTROL0);
+ /* DLL start */
+ pc0 |= 0x1;
+ writel(pc0, base + S5P_DMC_PHYCONTROL0);
+
+ /* Find lock val */
+ do {
+ lv = readl(base + S5P_DMC_PHYSTATUS);
+ } while ((lv & 0x7) != 0x7);
+
+ lv >>= 6;
+ lv &= 0xff; /* ctrl_lock_value[9:2] - coarse */
+ pc0 |= (lv << 24); /* ctrl_force */
+ writel(pc0, base + S5P_DMC_PHYCONTROL0); /* force value locking */
+}
+
+
+
+void __bare_init s5p_init_dram_bank(uint32_t base, uint32_t mc0, uint32_t mc1)
+{
+#ifdef S5P_DRAM_LPDDR
+ uint32_t reg = 0x100;
+#endif
+#ifdef S5P_DRAM_LPDDR2
+ uint32_t reg = 0x200;
+#endif
+#ifdef S5P_DRAM_DDR2
+ uint32_t reg = 0x400;
+#endif
+ reg |= (S5P_DRAM_BURST) << 20;
+#ifdef S5P_DRAM_16BIT
+ reg |= 0x1000;
+#else /* 32-bit */
+ reg |= 0x2000;
+#endif
+ if (mc1)
+ reg |= 0x10000; /* two chips */
+
+ start_dll(base);
+ writel(reg, base + S5P_DMC_MEMCONTROL);
+
+ /* Set up memory layout */
+ writel(mc0, base + S5P_DMC_MEMCONFIG0);
+ if (mc1)
+ writel(mc1, base + S5P_DMC_MEMCONFIG1);
+ /* Open page precharge policy - reasonable defaults */
+ writel(0xFF000000, base + S5P_DMC_PRECHCONFIG);
+ /* Set up timings */
+ writel(DMC_TIMING_AREF, base + S5P_DMC_TIMINGAREF);
+ writel(DMC_TIMING_ROW, base + S5P_DMC_TIMINGROW);
+ writel(DMC_TIMING_DATA, base + S5P_DMC_TIMINGDATA);
+ writel(DMC_TIMING_PWR, base + S5P_DMC_TIMINGPOWER);
+
+ /* Start-Up Commands */
+ init_seq(base, 0);
+ if (mc1)
+ init_seq(base, 1);
+
+ /* Reasonable defaults and auto-refresh on */
+ writel(0x0FFF1070, base + S5P_DMC_CONCONTROL);
+ /* Reasonable defaults */
+ writel(0xFFFF00FF, base + S5P_DMC_PWRDNCONFIG);
+}
+
+
+#define BANK_ENABLED(base) (readl((base) + S5P_DMC_PHYCONTROL0) & 1)
+#define NUM_EXTRA_CHIPS(base) ((readl((base) + S5P_DMC_MEMCONTROL) >> 16) & 0xF)
+
+#define BANK_START(x) ((x) & 0xFF000000)
+#define BANK_END(x) (BANK_START(x) | ~(((x) & 0x00FF0000) << 8))
+#define BANK_LEN(x) (BANK_END(x) - BANK_START(x) + 1)
+
+static inline void sortswap(uint32_t *x, uint32_t *y)
+{
+ if (*y < *x) {
+ *x ^= *y;
+ *y ^= *x;
+ *x ^= *y;
+ }
+}
+
+uint32_t s3c_get_memory_size(void)
+{
+ int i;
+ uint32_t len;
+ uint32_t mc[4] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
+ /* Read MEMCONFIG registers */
+ if (BANK_ENABLED(S5P_DMC0_BASE)) {
+ mc[0] = readl(S5P_DMC0_BASE + S5P_DMC_MEMCONFIG0);
+ if (NUM_EXTRA_CHIPS(S5P_DMC0_BASE) > 0)
+ mc[1] = readl(S5P_DMC0_BASE + S5P_DMC_MEMCONFIG1);
+ }
+ if (BANK_ENABLED(S5P_DMC1_BASE)) {
+ mc[2] = readl(S5P_DMC1_BASE + S5P_DMC_MEMCONFIG0);
+ if (NUM_EXTRA_CHIPS(S5P_DMC1_BASE) > 0)
+ mc[3] = readl(S5P_DMC1_BASE + S5P_DMC_MEMCONFIG1);
+ }
+ /* Sort using a sorting network */
+ sortswap(mc + 0, mc + 2);
+ sortswap(mc + 1, mc + 3);
+ sortswap(mc + 0, mc + 1);
+ sortswap(mc + 2, mc + 3);
+ sortswap(mc + 1, mc + 2);
+ /* Is at least one chip enabled? */
+ if (mc[0] == 0xFFFFFFFF)
+ return 0;
+ /* Determine maximum continuous region at start */
+ len = BANK_LEN(mc[0]);
+ for (i = 1; i < 4; ++i) {
+ if (BANK_START(mc[i]) == BANK_END(mc[i - 1]) + 1)
+ len += BANK_LEN(mc[i]);
+ else
+ break;
+ }
+ return len;
+}
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 6/9] S5P lowlevel clock init
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (4 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 5/9] S5P DRAM support Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 7/9] Revert "S5PV210 iROM magic boot code" Alexey Galakhov
` (2 subsequent siblings)
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
arch/arm/boards/tiny210/config.h | 13 +++++
arch/arm/boards/tiny210/lowlevel.c | 4 +-
arch/arm/mach-samsung/Makefile | 1 +
arch/arm/mach-samsung/include/mach/s3c-generic.h | 1 +
arch/arm/mach-samsung/lowlevel-s5pcxx.c | 61 ++++++++++++++++++++++
5 files changed, 79 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-samsung/lowlevel-s5pcxx.c
diff --git a/arch/arm/boards/tiny210/config.h b/arch/arm/boards/tiny210/config.h
index 83cb0b4..36f0601 100644
--- a/arch/arm/boards/tiny210/config.h
+++ b/arch/arm/boards/tiny210/config.h
@@ -8,3 +8,16 @@
#define DMC_TIMING_ROW 0x2B34438A
#define DMC_TIMING_DATA 0x24240000
#define DMC_TIMING_PWR 0x0BDC0343
+
+#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+#define BOARD_APLL_VAL set_pll(0x7d, 0x3, 0x1)
+#define BOARD_MPLL_VAL set_pll(0x29b, 0xc, 0x1)
+#define BOARD_EPLL_VAL set_pll(0x60, 0x6, 0x2)
+#define BOARD_VPLL_VAL set_pll(0x6c, 0x6, 0x3)
+
+#define BOARD_CLK_DIV0_MASK 0xFFFFFFFF
+#define BOARD_CLK_DIV0_VAL 0x14131440
+#define BOARD_APLL_LOCKTIME 0x2cf
+
+
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
index dcf4091..344be6a 100644
--- a/arch/arm/boards/tiny210/lowlevel.c
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -32,7 +32,9 @@ void __bare_init board_init_lowlevel(void)
{
unsigned r;
- /* TODO: initialize PLL here */
+#ifdef CONFIG_S3C_PLL_INIT
+ s5p_init_pll();
+#endif
if (get_pc() < 0xD0000000) /* Are we running from iRAM? */
return; /* No, we don't. */
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index ac59d7b..becf2a7 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -1,5 +1,6 @@
obj-y += s3c-timer.o generic.o
obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
+obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o mem-s5pcxx.o
obj-$(CONFIG_ARCH_S5PCxx) += s5p-irom-boot.o
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 381ad7b..53bb95d 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -40,6 +40,7 @@ void s3c24xx_disable_second_sdram_bank(void);
#endif
#ifdef CONFIG_ARCH_S5PCxx
+void s5p_init_pll(void);
void s5p_init_dram_bank(uint32_t base, uint32_t mc0, uint32_t mc1);
int s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count);
#endif
diff --git a/arch/arm/mach-samsung/lowlevel-s5pcxx.c b/arch/arm/mach-samsung/lowlevel-s5pcxx.c
new file mode 100644
index 0000000..15afa47
--- /dev/null
+++ b/arch/arm/mach-samsung/lowlevel-s5pcxx.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <io.h>
+#include <init.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-clocks.h>
+#include <mach/s3c-generic.h>
+
+#ifdef CONFIG_S3C_PLL_INIT
+void __bare_init s5p_init_pll(void)
+{
+ uint32_t reg;
+ int i;
+
+ /* Set Mux to FIN */
+ writel(0, S5P_CLK_SRC0);
+
+ writel(BOARD_APLL_LOCKTIME, S5P_xPLL_LOCK + S5P_APLL);
+
+ /* Disable PLL */
+ writel(0, S5P_xPLL_CON + S5P_APLL);
+ writel(0, S5P_xPLL_CON + S5P_MPLL);
+
+ /* Set up dividers */
+ reg = readl(S5P_CLK_DIV0);
+ reg &= ~(BOARD_CLK_DIV0_MASK);
+ reg |= (BOARD_CLK_DIV0_VAL);
+ writel(reg, S5P_CLK_DIV0);
+
+ /* Set up PLLs */
+ writel(BOARD_APLL_VAL, S5P_xPLL_CON + S5P_APLL);
+ writel(BOARD_MPLL_VAL, S5P_xPLL_CON + S5P_MPLL);
+ writel(BOARD_EPLL_VAL, S5P_xPLL_CON + S5P_EPLL);
+ writel(BOARD_VPLL_VAL, S5P_xPLL_CON + S5P_VPLL);
+
+ /* Wait for sync */
+ for (i = 0; i < 0x10000; ++i)
+ barrier();
+
+ reg = readl(S5P_CLK_SRC0);
+ reg |= 0x1111; /* switch MUX to PLL outputs */
+ writel(reg, S5P_CLK_SRC0);
+}
+#endif /* CONFIG_S3C_PLL_INIT */
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 7/9] Revert "S5PV210 iROM magic boot code"
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (5 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 6/9] S5P lowlevel clock init Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 8/9] S5P iROM boot support - improved Alexey Galakhov
2012-05-13 12:40 ` [PATCH 9/9] S5P boot header and image generator Alexey Galakhov
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
This reverts commit 4d6b83126d870ce3f0667d0a46077b8717521381.
Conflicts:
arch/arm/boards/tiny210/lowlevel.c
arch/arm/mach-samsung/Makefile
arch/arm/mach-samsung/include/mach/s3c-generic.h
---
arch/arm/Kconfig | 1 -
arch/arm/boards/tiny210/lowlevel.c | 9 +--
arch/arm/lib/barebox.lds.S | 4 --
arch/arm/mach-samsung/Kconfig | 1 -
arch/arm/mach-samsung/Makefile | 1 -
arch/arm/mach-samsung/include/mach/s3c-generic.h | 1 -
arch/arm/mach-samsung/s5p-irom-boot.c | 64 ----------------------
common/Kconfig | 24 --------
8 files changed, 2 insertions(+), 103 deletions(-)
delete mode 100644 arch/arm/mach-samsung/s5p-irom-boot.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6012a1a..f465084 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -16,7 +16,6 @@ config ARM
select HAS_MODULES
select HAVE_CONFIGURABLE_MEMORY_LAYOUT
select HAVE_CONFIGURABLE_TEXT_BASE
- select HAVE_BARE_INIT_PADDING
default y
config ARM_AMBA
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
index 344be6a..d14b9eb 100644
--- a/arch/arm/boards/tiny210/lowlevel.c
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -23,14 +23,12 @@
#include <init.h>
#include <io.h>
#include <asm/barebox-arm.h>
-#include <asm/sections.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-clocks.h>
#include <mach/s3c-generic.h>
void __bare_init board_init_lowlevel(void)
{
- unsigned r;
#ifdef CONFIG_S3C_PLL_INIT
s5p_init_pll();
@@ -43,10 +41,7 @@ void __bare_init board_init_lowlevel(void)
s5p_init_dram_bank(S5P_DMC0_BASE, 0x20E00323, 0);
#endif
- if (! s5p_irom_mmc_load((void*)TEXT_BASE - 16, 1, (barebox_image_size + 16 + 511) / 512))
- while (1) { } /* hang */
+ /* TODO: load barebox to DRAM here */
- /* Jump to SDRAM */
- r = (unsigned)TEXT_BASE;
- __asm__ __volatile__("mov pc, %0" : : "r"(r));
+ while (1) { } /* hang */
}
diff --git a/arch/arm/lib/barebox.lds.S b/arch/arm/lib/barebox.lds.S
index 4d02eda..3fd271b 100644
--- a/arch/arm/lib/barebox.lds.S
+++ b/arch/arm/lib/barebox.lds.S
@@ -49,10 +49,6 @@ SECTIONS
__bare_init_start = .;
*(.text_bare_init*)
__bare_init_end = .;
-#ifdef CONFIG_BAREBOX_BARE_INIT_PADDING
- . = (. + (CONFIG_BAREBOX_BARE_INIT_PADDING_SIZE));
- . = ALIGN(CONFIG_BAREBOX_BARE_INIT_PADDING_ALIGN);
-#endif
__exceptions_start = .;
KEEP(*(.text_exceptions*))
__exceptions_stop = .;
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 183b84d..fcef677 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -98,7 +98,6 @@ config MACH_TINY210
select CPU_S5PV210
select MACH_HAS_LOWLEVEL_INIT
select MACH_DO_LOWLEVEL_INIT
- select BAREBOX_BARE_INIT_PADDING
endchoice
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index becf2a7..e05d292 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -3,5 +3,4 @@ obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o mem-s5pcxx.o
-obj-$(CONFIG_ARCH_S5PCxx) += s5p-irom-boot.o
obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 53bb95d..9a5a642 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -42,5 +42,4 @@ void s3c24xx_disable_second_sdram_bank(void);
#ifdef CONFIG_ARCH_S5PCxx
void s5p_init_pll(void);
void s5p_init_dram_bank(uint32_t base, uint32_t mc0, uint32_t mc1);
-int s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count);
#endif
diff --git a/arch/arm/mach-samsung/s5p-irom-boot.c b/arch/arm/mach-samsung/s5p-irom-boot.c
deleted file mode 100644
index 8fa0de4..0000000
--- a/arch/arm/mach-samsung/s5p-irom-boot.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2012 Alexey Galakhov
- *
- * Based on code from u-boot found somewhere on the web
- * that seems to originate from Samsung
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <config.h>
-#include <common.h>
-#include <init.h>
-#include <mach/s3c-generic.h>
-
-/*
- * These magical address values are from u-boot
- * Not sure what they really mean but they work
- */
-#if 1 /* S5PV210 and other CPUs */
-# define MADDR_CH 0xD0037488
-# define MADDR_CP 0xD0037F98
-#else /* not sure when, some older CPUs */
-# define MADDR_CH 0xD003A508
-# define MADDR_CP 0xD003E008
-#endif
-
-typedef uint32_t (*mmc2mem_func)
-(uint32_t channel, uint32_t start_block, uint16_t block_count, uint32_t *dest, uint32_t init);
-
-/*
- * Call to the magical iROM code present on S5P CPUs
- * Block seems to be 512 bytes
- */
-int __bare_init s5p_irom_mmc_load(void *dest, uint32_t start_block, uint16_t block_count)
-{
- uint32_t ret;
- uint32_t chan;
- uint32_t ch = *(volatile uint32_t*)(MADDR_CH);
- mmc2mem_func cp_func = (mmc2mem_func)(*(uint32_t*)(MADDR_CP));
- switch (ch)
- {
- case 0xEB000000:
- chan = 0;
- break;
- case 0xEB200000:
- chan = 2;
- break;
- default:
- return 0;
- }
-
- ret = cp_func(chan, start_block, block_count, (uint32_t*)dest, 0);
- if (ret == 0)
- return 0; /* error */
- return 1;
-}
diff --git a/common/Kconfig b/common/Kconfig
index 199268e..73d620a 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -124,30 +124,6 @@ config BAREBOX_MAX_BARE_INIT_SIZE
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
-config HAVE_BARE_INIT_PADDING
- bool
-
-config BAREBOX_BARE_INIT_PADDING
- depends on HAVE_BARE_INIT_PADDING
- bool "Enable bare_init tail padding"
- default n
- help
- Some architectures require that 1st stage loader is padded
- with zeroes. This will add zero padding at the end of
- bare_init block. If unsure, say n.
-
-config BAREBOX_BARE_INIT_PADDING_SIZE
- depends on BAREBOX_BARE_INIT_PADDING
- prompt "Minimal bare_init padding size"
- hex
- default 0x4
-
-config BAREBOX_BARE_INIT_PADDING_ALIGN
- depends on BAREBOX_BARE_INIT_PADDING
- prompt "bare_init end alignment"
- hex
- default 0x200
-
config HAVE_CONFIGURABLE_MEMORY_LAYOUT
bool
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 8/9] S5P iROM boot support - improved
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (6 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 7/9] Revert "S5PV210 iROM magic boot code" Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 9/9] S5P boot header and image generator Alexey Galakhov
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
---
arch/arm/boards/tiny210/lowlevel.c | 13 ++++-
arch/arm/mach-samsung/Kconfig | 11 ++++
arch/arm/mach-samsung/Makefile | 1 +
arch/arm/mach-samsung/include/mach/s5pcxx-irom.h | 32 ++++++++++++
arch/arm/mach-samsung/s5p-irom-boot.c | 59 ++++++++++++++++++++++
5 files changed, 115 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-samsung/include/mach/s5pcxx-irom.h
create mode 100644 arch/arm/mach-samsung/s5p-irom-boot.c
diff --git a/arch/arm/boards/tiny210/lowlevel.c b/arch/arm/boards/tiny210/lowlevel.c
index d14b9eb..d8e1fca 100644
--- a/arch/arm/boards/tiny210/lowlevel.c
+++ b/arch/arm/boards/tiny210/lowlevel.c
@@ -23,12 +23,16 @@
#include <init.h>
#include <io.h>
#include <asm/barebox-arm.h>
+#include <asm/sections.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-clocks.h>
#include <mach/s3c-generic.h>
+#include <mach/s5pcxx-irom.h>
+
void __bare_init board_init_lowlevel(void)
{
+ uint32_t r;
#ifdef CONFIG_S3C_PLL_INIT
s5p_init_pll();
@@ -41,7 +45,14 @@ void __bare_init board_init_lowlevel(void)
s5p_init_dram_bank(S5P_DMC0_BASE, 0x20E00323, 0);
#endif
- /* TODO: load barebox to DRAM here */
+#ifdef CONFIG_S5P_USE_IROM
+ /* FIXME this boots from MMC only */
+ if (! s5p_irom_load_mmc((void*)TEXT_BASE - 16, 1, (barebox_image_size + 16 + 511) / 512))
+ while (1) { } /* hang */
+#endif
+ /* Jump to SDRAM */
+ r = (unsigned)TEXT_BASE;
+ __asm__ __volatile__("mov pc, %0" : : "r"(r));
while (1) { } /* hang */
}
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index fcef677..1387d05 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -98,6 +98,7 @@ config MACH_TINY210
select CPU_S5PV210
select MACH_HAS_LOWLEVEL_INIT
select MACH_DO_LOWLEVEL_INIT
+ select S5P_USE_IROM
endchoice
@@ -136,6 +137,16 @@ config S3C_NAND_BOOT
Add generic support to boot from NAND flash. Image loading will be
skipped if the code is running from NOR or already from SDRAM.
+if ARCH_S5PCxx
+
+config S5P_USE_IROM
+ bool
+ prompt "Use iROM for booting"
+ help
+ Use CPU built-in iROM code for booting. If unsure, say N.
+
+endif
+
endmenu
endif
diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index e05d292..0e23eae 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -3,4 +3,5 @@ obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24x0.o mem-s3c24x0.o
obj-$(CONFIG_ARCH_S5PCxx) += gpio-s5pcxx.o clocks-s5pcxx.o mem-s5pcxx.o
+obj-$(CONFIG_S5P_USE_IROM) += s5p-irom-boot.o
obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/s5pcxx-irom.h b/arch/arm/mach-samsung/include/mach/s5pcxx-irom.h
new file mode 100644
index 0000000..65c2fb4
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s5pcxx-irom.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * Using iROM to boot is generally not a good idea. However we don't have
+ * another method of booting yet.
+ * TODO: implement NAND and SD booting and remove this file.
+ */
+
+#ifndef __S5PCXX_IROM_H
+#define __S5PCXX_IROM_H
+
+#include <config.h>
+#include <common.h>
+
+int __bare_init s5p_irom_load_mmc(void *dest, uint32_t start_block, uint16_t block_count);
+
+#endif /* __S5PCXX_IROM_H */
diff --git a/arch/arm/mach-samsung/s5p-irom-boot.c b/arch/arm/mach-samsung/s5p-irom-boot.c
new file mode 100644
index 0000000..dd47f072
--- /dev/null
+++ b/arch/arm/mach-samsung/s5p-irom-boot.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * Based on code from u-boot found somewhere on the web
+ * that seems to originate from Samsung
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * Using iROM to boot is generally not a good idea. However we don't have
+ * another method of booting yet.
+ * TODO: implement NAND and SD booting and remove this file.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <mach/s3c-generic.h>
+#include <mach/s5pcxx-irom.h>
+
+/* Magical addressed from S5PV210 Application Note */
+
+/* Variables */
+#define ADDR_globalBlockSize 0xD0037480
+#define ADDR_globalSDHCInfoBit 0xD0037484
+#define ADDR_V210_SDMMC_BASE 0xD0037488
+/* Functions */
+#define ADDR_NF8_ReadPage_Adv 0xD0037F90
+#define ADDR_NF16_ReadPage_Adv 0xD0037F94
+#define ADDR_CopySDMMCtoMem 0xD0037F98
+#define ADDR_CopyMMC4_3toMem 0xD0037F9C
+#define ADDR_CopyOND_ReadMultiPages 0xD0037FA0
+#define ADDR_CopyOND_ReadMultiPages_Adv 0xD0037FA4
+#define ADDR_Copy_eSSDtoMem 0xD0037FA8
+#define ADDR_Copy_eSSDtoMem_Adv 0xD0037FAC
+#define ADDR_NF8_ReadPage_Adv128p 0xD0037FB0
+
+#define R(x) (*(volatile uint32_t*)(x))
+
+int __bare_init s5p_irom_load_mmc(void *dest, uint32_t start_block, uint16_t block_count)
+{
+ typedef uint32_t (*func_t) (int32_t, uint32_t, uint16_t, uint32_t*, int8_t);
+ uint32_t ret;
+ uint32_t chbase = R(ADDR_V210_SDMMC_BASE);
+ func_t func = (func_t)R(ADDR_CopySDMMCtoMem);
+ int chan = (chbase - 0xEB000000) >> 20;
+ if (chan != 0 && chan != 2)
+ return 0;
+ return func(chan, start_block, block_count, (uint32_t*)dest, 0) ? 1 : 0;
+}
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 9/9] S5P boot header and image generator
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
` (7 preceding siblings ...)
2012-05-13 12:40 ` [PATCH 8/9] S5P iROM boot support - improved Alexey Galakhov
@ 2012-05-13 12:40 ` Alexey Galakhov
8 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-13 12:40 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
---
.gitignore | 2 +
arch/arm/Makefile | 7 +++
scripts/Makefile | 1 +
scripts/s5p_cksum.c | 140 +++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 150 insertions(+)
create mode 100644 scripts/s5p_cksum.c
diff --git a/.gitignore b/.gitignore
index 8a5c583..5f76602 100644
--- a/.gitignore
+++ b/.gitignore
@@ -33,6 +33,7 @@ barebox.S
barebox.bin
barebox.srec
barebox.netx
+barebox.s5p
barebox.map
System.map
Module.symvers
@@ -63,3 +64,4 @@ cscope.*
# patches
*.patch
scripts/gen_netx_image
+scripts/s5p_cksum
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1af1090..fc29aca 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -165,6 +165,13 @@ ifeq ($(machine-y),netx)
KBUILD_IMAGE := barebox.netx
endif
+barebox.s5p: barebox.bin
+ $(Q)scripts/s5p_cksum barebox.bin barebox.s5p
+
+ifeq ($(CONFIG_ARCH_S5PCxx),y)
+KBUILD_IMAGE := barebox.s5p
+endif
+
MLO: barebox.bin
@echo " IFT " $@
$(Q)scripts/omap_signGP barebox.bin $(TEXT_BASE) 1
diff --git a/scripts/Makefile b/scripts/Makefile
index cb049fd..784d205 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -10,6 +10,7 @@ hostprogs-y += mkimage
hostprogs-y += bareboxenv
hostprogs-$(CONFIG_ARCH_NETX) += gen_netx_image
hostprogs-$(CONFIG_ARCH_OMAP) += omap_signGP
+hostprogs-$(CONFIG_ARCH_S5PCxx) += s5p_cksum
always := $(hostprogs-y) $(hostprogs-m)
diff --git a/scripts/s5p_cksum.c b/scripts/s5p_cksum.c
new file mode 100644
index 0000000..7142532
--- /dev/null
+++ b/scripts/s5p_cksum.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2012 Alexey Galakhov
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stddef.h>
+#include <errno.h>
+
+#define DEFAULT_BUF_SIZE 8192
+
+static int usage(const char* me)
+{
+ printf("Usage: %s <input> <output> [<bufsize]\n", me);
+ return 1;
+}
+
+static void put32(uint8_t *ptr, uint32_t value)
+{
+ ptr[0] = value & 0xFF;
+ ptr[1] = (value >> 8) & 0xFF;
+ ptr[2] = (value >> 16) & 0xFF;
+ ptr[3] = (value >> 24) & 0xFF;
+}
+
+static size_t safe_fread(void *buf, size_t len, FILE* file)
+{
+ size_t rd = fread(buf, 1, len, file);
+ if (! rd) {
+ if (ferror(file))
+ fprintf(stderr, "Error reading file: %s\n", strerror(errno));
+ else
+ fprintf(stderr, "Unexpected end of file\n");
+ }
+ return rd;
+}
+
+static size_t safe_fwrite(const void *buf, size_t len, FILE* file)
+{
+ size_t wr = fwrite(buf, 1, len, file);
+ if (wr != len) {
+ fprintf(stderr, "Error writing file: %s\n", strerror(errno));
+ return 0;
+ }
+ return wr;
+}
+
+static int process(FILE *input, FILE *output, uint8_t *buf, unsigned bufsize)
+{
+ size_t rd;
+ unsigned i;
+ uint32_t cksum;
+ /* Read first chunk */
+ rd = safe_fread(buf + 16, bufsize - 16, input);
+ if (! rd)
+ return 4;
+ /* Calculate header */
+ put32(buf + 0, bufsize);
+ cksum = 0;
+ for (i = 16; i < bufsize; ++i)
+ cksum += (uint32_t)buf[i];
+ put32(buf + 8, cksum);
+ if (! safe_fwrite(buf, bufsize, output))
+ return 4;
+ /* Copy the rest of file */
+ while (! feof(input)) {
+ rd = safe_fread(buf, bufsize, input);
+ if (! rd)
+ return 4;
+ if (! safe_fwrite(buf, rd, output))
+ return 4;
+ }
+ return 0;
+}
+
+static int work(const char* me, const char *infile, const char *outfile, unsigned bufsize)
+{
+ uint8_t *buf;
+ FILE *input;
+ FILE *output;
+ int ret;
+ if (bufsize < 512 || bufsize > 65536)
+ return usage(me);
+ buf = calloc(1, bufsize);
+ if (! buf) {
+ fprintf(stderr, "Unable to allocate %u bytes of memory\n", bufsize);
+ return 2;
+ }
+ input = fopen(infile, "r");
+ if (! input) {
+ fprintf(stderr, "Cannot open `%s' for reading\n", infile);
+ free(buf);
+ return 3;
+ }
+ output = fopen(outfile, "w");
+ if (! output) {
+ fprintf(stderr, "Cannot open `%s' for writing\n", outfile);
+ fclose(input);
+ free(buf);
+ return 3;
+ }
+
+ ret = process(input, output, buf, bufsize);
+
+ fclose(output);
+ fclose(input);
+ free(buf);
+ return ret;
+}
+
+int main(int argc, char** argv)
+{
+ switch (argc) {
+ case 3:
+ return work(argv[0], argv[1], argv[2], DEFAULT_BUF_SIZE);
+ case 4:
+ return work(argv[0], argv[1], argv[2], atoi(argv[3]));
+ default:
+ return usage(argv[0]);
+ }
+}
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 4/9] S5PV210 iROM magic boot code
2012-05-13 12:40 ` [PATCH 4/9] S5PV210 iROM magic boot code Alexey Galakhov
@ 2012-05-14 7:51 ` Sascha Hauer
2012-05-14 8:55 ` Alexey Galakhov
0 siblings, 1 reply; 28+ messages in thread
From: Sascha Hauer @ 2012-05-14 7:51 UTC (permalink / raw)
To: Alexey Galakhov; +Cc: barebox
On Sun, May 13, 2012 at 06:40:01PM +0600, Alexey Galakhov wrote:
> Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/boards/tiny210/lowlevel.c | 11 +++-
> arch/arm/lib/barebox.lds.S | 4 ++
> arch/arm/mach-samsung/Kconfig | 1 +
> arch/arm/mach-samsung/Makefile | 1 +
> arch/arm/mach-samsung/include/mach/s3c-generic.h | 4 ++
> arch/arm/mach-samsung/s5p-irom-boot.c | 64 ++++++++++++++++++++++
> common/Kconfig | 24 ++++++++
> 8 files changed, 108 insertions(+), 2 deletions(-)
Please clean up your series. This patch gets reverted in 7/9 so
no reason to introduce it in the first place.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-13 12:39 ` [PATCH 2/9] Fine split S3C arch dependencies from generic code Alexey Galakhov
@ 2012-05-14 8:03 ` Juergen Beisert
2012-05-14 8:54 ` Alexey Galakhov
2012-05-14 8:12 ` Sascha Hauer
1 sibling, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 8:03 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Alexey Galakhov wrote:
> Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
> ---
> arch/arm/boards/a9m2410/a9m2410.c | 10 +-
> arch/arm/boards/a9m2440/a9m2410dev.c | 2 +-
> arch/arm/boards/a9m2440/a9m2440.c | 10 +-
> arch/arm/boards/mini2440/mini2440.c | 10 +-
> [...]
> delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h
> create mode 100644 arch/arm/mach-samsung/include/mach/gpio-s3c24x0.h
> [...]
> create mode 100644 arch/arm/mach-samsung/include/mach/nand-s3c24x0.h
> delete mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-nand.h
> [...]
> diff --git a/arch/arm/boards/a9m2410/a9m2410.c
> b/arch/arm/boards/a9m2410/a9m2410.c index 1a3181e..e416c8e 100644
> --- a/arch/arm/boards/a9m2410/a9m2410.c
> +++ b/arch/arm/boards/a9m2410/a9m2410.c
> @@ -33,10 +33,10 @@
> #include <nand.h>
> #include <io.h>
> #include <mach/s3c-iomap.h>
> -#include <mach/s3c24xx-nand.h>
> +#include <mach/nand-s3c24x0.h>
> #include <mach/s3c-generic.h>
> #include <mach/s3c-busctl.h>
> -#include <mach/s3c24xx-gpio.h>
> +#include <mach/gpio-s3c24x0.h>
> [...]
> delete mode 100644 arch/arm/mach-samsung/s3c24xx-clocks.c
You have to touch all S3C24xx based board files just to rename these files
from "<socname>-<function>.h" to "<function>-<socname>.h"?
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-13 12:39 ` [PATCH 2/9] Fine split S3C arch dependencies from generic code Alexey Galakhov
2012-05-14 8:03 ` Juergen Beisert
@ 2012-05-14 8:12 ` Sascha Hauer
1 sibling, 0 replies; 28+ messages in thread
From: Sascha Hauer @ 2012-05-14 8:12 UTC (permalink / raw)
To: Alexey Galakhov; +Cc: barebox
On Sun, May 13, 2012 at 06:39:59PM +0600, Alexey Galakhov wrote:
> Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
> ---
>
> // {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
> static struct s3c24x0_nand_platform_data nand_info = {
> @@ -51,7 +51,7 @@ static int a9m2410_mem_init(void)
> * Note: On this card the second SDRAM page is not used
> */
> s3c24xx_disable_second_sdram_bank();
> - size = s3c24xx_get_memory_size();
> + size = s3c_get_memory_size();
s3c24xx_get_memory_size is a s3c24xx specific function, which is called
from a s3c24xx specific context, so please keep the name like it is.
Generally if two functions need to be implemented differently on
different SoCs they should have a different name. We learned that
the hard way in the kernel where we tend to build multiple SoCs in
a single image. With a generic s3c_ this won't work.
Not that we want to compile in multiple SoC support into barebox in the
near future, but the above already *is* done right, so don't change it.
> diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
> index bedb0f7..f23fc5d 100644
> --- a/arch/arm/boards/a9m2440/a9m2410dev.c
> +++ b/arch/arm/boards/a9m2440/a9m2410dev.c
> @@ -30,7 +30,7 @@
> #include <io.h>
> #include <mach/s3c-iomap.h>
> #include <mach/s3c-busctl.h>
> -#include <mach/s3c24xx-gpio.h>
> +#include <mach/gpio-s3c24x0.h>
Don't rename files if you don't really have to. One may argue if one
name or the other is better, but once the files are there you need
really good reasons to change them because tracking git history over renames
is hard.
If you really want to change filenames, please generate your patches
with git format-patch -M which will make it easier to review.
> #include <mach/s3c-iomap.h>
> -#include <mach/s3c24xx-nand.h>
> +#include <mach/nand-s3c24x0.h>
Same here.
Overall this patch introduces a lot of churn without explaining why it
is useful. The series would be much better if you just drop this patch.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-13 12:40 ` [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only) Alexey Galakhov
@ 2012-05-14 8:13 ` Juergen Beisert
2012-05-14 8:57 ` Alexey Galakhov
0 siblings, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 8:13 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Alexey Galakhov wrote:
> Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
> ---
> arch/arm/Kconfig | 6 +
> arch/arm/Makefile | 1 +
> arch/arm/boards/tiny210/Makefile | 1 +
> arch/arm/boards/tiny210/config.h | 1 +
> arch/arm/boards/tiny210/lowlevel.c | 41 +
> arch/arm/boards/tiny210/tiny210.c | 113 +++
> arch/arm/mach-samsung/Kconfig | 24 +
> arch/arm/mach-samsung/Makefile | 1 +
> arch/arm/mach-samsung/clocks-s5pcxx.c | 98 +++
> arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++
> arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h | 55 ++
> arch/arm/mach-samsung/include/mach/gpio.h | 3 +
> arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 49 ++
> arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798 ++++++++++++++++++++
> arch/arm/mach-samsung/include/mach/s3c-clocks.h | 3 +
> arch/arm/mach-samsung/include/mach/s3c-iomap.h | 3 +
> 16 files changed, 1320 insertions(+)
> create mode 100644 arch/arm/boards/tiny210/Makefile
> create mode 100644 arch/arm/boards/tiny210/config.h
> create mode 100644 arch/arm/boards/tiny210/lowlevel.c
> create mode 100644 arch/arm/boards/tiny210/tiny210.c
> create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
> create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
> create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h
> create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h
> create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
> [...]
This patch series reflects your development steps (2nd stage first, then
native boot support). But this is not useful when including the results into
the Barebox repository.
For example you should add your new platform at the end of this patch series
after all the required preparations are done to make it work.
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-14 8:03 ` Juergen Beisert
@ 2012-05-14 8:54 ` Alexey Galakhov
2012-05-14 8:57 ` Sascha Hauer
2012-05-14 9:00 ` Juergen Beisert
0 siblings, 2 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 8:54 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
On 14.05.2012 14:03, Juergen Beisert wrote:
> You have to touch all S3C24xx based board files just to rename these files
> from "<socname>-<function>.h" to "<function>-<socname>.h"?
>
> jbe
>
Not exactly so. Yes, I have to rename file - to make space for another
one. Having just one file with lots of #ifdefs for two very different
architectures seems to be worse than this.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 4/9] S5PV210 iROM magic boot code
2012-05-14 7:51 ` Sascha Hauer
@ 2012-05-14 8:55 ` Alexey Galakhov
0 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 8:55 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 14.05.2012 13:51, Sascha Hauer wrote:
> On Sun, May 13, 2012 at 06:40:01PM +0600, Alexey Galakhov wrote:
>> Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
>> ---
>> arch/arm/Kconfig | 1 +
>> arch/arm/boards/tiny210/lowlevel.c | 11 +++-
>> arch/arm/lib/barebox.lds.S | 4 ++
>> arch/arm/mach-samsung/Kconfig | 1 +
>> arch/arm/mach-samsung/Makefile | 1 +
>> arch/arm/mach-samsung/include/mach/s3c-generic.h | 4 ++
>> arch/arm/mach-samsung/s5p-irom-boot.c | 64 ++++++++++++++++++++++
>> common/Kconfig | 24 ++++++++
>> 8 files changed, 108 insertions(+), 2 deletions(-)
>
> Please clean up your series. This patch gets reverted in 7/9 so
> no reason to introduce it in the first place.
Ok. That's because I pushed the patch to public github before I reverted it.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-14 8:13 ` Juergen Beisert
@ 2012-05-14 8:57 ` Alexey Galakhov
2012-05-14 9:04 ` Juergen Beisert
0 siblings, 1 reply; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 8:57 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
On 14.05.2012 14:13, Juergen Beisert wrote:
> This patch series reflects your development steps (2nd stage first, then
> native boot support). But this is not useful when including the results into
> the Barebox repository.
>
> For example you should add your new platform at the end of this patch series
> after all the required preparations are done to make it work.
Ok, I'll rebase them.
The reason to do so was to introduce (harmless?) refactoring first and
to add new features next to make git bisect work.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-14 8:54 ` Alexey Galakhov
@ 2012-05-14 8:57 ` Sascha Hauer
2012-05-14 8:59 ` Alexey Galakhov
2012-05-14 9:00 ` Juergen Beisert
1 sibling, 1 reply; 28+ messages in thread
From: Sascha Hauer @ 2012-05-14 8:57 UTC (permalink / raw)
To: Alexey Galakhov; +Cc: barebox, Juergen Beisert
On Mon, May 14, 2012 at 02:54:08PM +0600, Alexey Galakhov wrote:
> On 14.05.2012 14:03, Juergen Beisert wrote:
>
> > You have to touch all S3C24xx based board files just to rename these files
> > from "<socname>-<function>.h" to "<function>-<socname>.h"?
> >
> > jbe
> >
>
> Not exactly so. Yes, I have to rename file - to make space for another
> one.
Hm? The SoC name already is in the filename, so there *is* space for a
new file.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-14 8:57 ` Sascha Hauer
@ 2012-05-14 8:59 ` Alexey Galakhov
0 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 8:59 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox, Juergen Beisert
On 14.05.2012 14:57, Sascha Hauer wrote:
> Hm? The SoC name already is in the filename, so there *is* space for a
> new file.
I'll move this to a separate rename-only patch. If you don't apply them,
nothing will break.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-14 8:54 ` Alexey Galakhov
2012-05-14 8:57 ` Sascha Hauer
@ 2012-05-14 9:00 ` Juergen Beisert
2012-05-14 9:30 ` Alexey Galakhov
1 sibling, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 9:00 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Alexey Galakhov wrote:
> On 14.05.2012 14:03, Juergen Beisert wrote:
> > You have to touch all S3C24xx based board files just to rename these
> > files from "<socname>-<function>.h" to "<function>-<socname>.h"?
>
> Not exactly so. Yes, I have to rename file - to make space for another
> one. Having just one file with lots of #ifdefs for two very different
> architectures seems to be worse than this.
Did you really read my answer?
Here again:
...just to rename these files from "<socname>-<function>.h"
to "<function>-<socname>.h"
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-14 8:57 ` Alexey Galakhov
@ 2012-05-14 9:04 ` Juergen Beisert
[not found] ` <4FB0D058.3070206@gmail.com>
0 siblings, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 9:04 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Alexey Galakhov wrote:
> On 14.05.2012 14:13, Juergen Beisert wrote:
> > This patch series reflects your development steps (2nd stage first, then
> > native boot support). But this is not useful when including the results
> > into the Barebox repository.
> >
> > For example you should add your new platform at the end of this patch
> > series after all the required preparations are done to make it work.
>
> Ok, I'll rebase them.
>
> The reason to do so was to introduce (harmless?) refactoring first and
> to add new features next to make git bisect work.
It would be all right if you had introduce the basic support first and it is
now part of the repository. And *then* add the native boot support as a
really second step and separate patch series.
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 2/9] Fine split S3C arch dependencies from generic code
2012-05-14 9:00 ` Juergen Beisert
@ 2012-05-14 9:30 ` Alexey Galakhov
0 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 9:30 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
> Did you really read my answer?
>
> Here again:
>
> ...just to rename these files from "<socname>-<function>.h"
> to "<function>-<socname>.h"
Sorry, I misunderstood. Going to fix now.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
[not found] ` <4FB0D058.3070206@gmail.com>
@ 2012-05-14 9:57 ` Juergen Beisert
2012-05-14 11:07 ` Alexey Galakhov
0 siblings, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 9:57 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Hi Alexey,
please keep the mailing list at least on CC.
Alexey Galakhov wrote:
> > It would be all right if you had introduce the basic support first and it
> > is now part of the repository. And *then* add the native boot support as
> > a really second step and separate patch series.
>
> The iROM support should be separated anyway. The reason is, iROM is only
> a temporary solution until we have a working replacement. This patch is
> designed to be easily reverted separately as soon as we'll able to boot
> without it.
>
> Using iROM to boot is generally a bad idea, but there's no alternative
> right now.
For you there might be no alternative right now. But for Barebox its all right
if only a basic support for this new CPU is available.
> I think the correct patch series should look like that:
>
> * make some space for everything (not introducing anything new, to be
> able to use git bisect if things do break)
> * add support of the new architecture to the existing code
> * add support for specific PLL
> * add support for specific DRAM
> * add support for iROM
Skip the iROM entirely in your patch series if you want to remove it later on.
What sense would it make to include it and then remove it again?
> * finally, add new board.
Yes. This step makes use of all the steps above (but not the iROM).
> The point is, if one reverts these patches one by one from the end, the
> rest will be usable.
There is almost _never_ a reason to revert a complete patch. If an older patch
has introduced a regression then there will be a new patch that fixes it and
explains why and how to fix.
> However, there's one bad thing: it's better to add at least one board to
> Kconfig with the new arch.
?
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-14 9:57 ` Juergen Beisert
@ 2012-05-14 11:07 ` Alexey Galakhov
2012-05-14 13:07 ` Juergen Beisert
0 siblings, 1 reply; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 11:07 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
Hi,
On 14.05.2012 15:57, Juergen Beisert wrote:
> Hi Alexey,
>
> please keep the mailing list at least on CC.
Oops. Sorry. Wrong button :)
>> Using iROM to boot is generally a bad idea, but there's no alternative
>> right now.
>
> For you there might be no alternative right now. But for Barebox its all right
> if only a basic support for this new CPU is available.
Even if it's not bootable?
Ok, there's better plan. Instead of adding iROM in a separate file, I'll
just call its magic address in board's lowlevel init. So this will be
for tiny210 only.
> Skip the iROM entirely in your patch series if you want to remove it later on.
> What sense would it make to include it and then remove it again?
It depends on what one means "remove again". This may happen after a
year or so. While I think I can implement NAND quite fast, I'm not so
optimistic about MMC.
>> However, there's one bad thing: it's better to add at least one board to
>> Kconfig with the new arch.
>
> ?
If there are no BOARDINFO and board-y defined, barebox cannot be built.
So one cannot compile barebox with CONFIG_ARCH_something if there are no
boards utilizing it, right? How to test the compilation then? Is it Ok?
Regards,
Alex
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-14 11:07 ` Alexey Galakhov
@ 2012-05-14 13:07 ` Juergen Beisert
2012-05-14 13:38 ` Alexey Galakhov
0 siblings, 1 reply; 28+ messages in thread
From: Juergen Beisert @ 2012-05-14 13:07 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Hi Alexey,
Alexey Galakhov wrote:
> >> Using iROM to boot is generally a bad idea, but there's no alternative
> >> right now.
> >
> > For you there might be no alternative right now. But for Barebox its all
> > right if only a basic support for this new CPU is available.
>
> Even if it's not bootable?
At least it can act as a second stage bootloader (network boot for example).
This is also the stage at which my S3C6410 currently is.
> Ok, there's better plan. Instead of adding iROM in a separate file, I'll
> just call its magic address in board's lowlevel init. So this will be
> for tiny210 only.
>
> > Skip the iROM entirely in your patch series if you want to remove it
> > later on. What sense would it make to include it and then remove it
> > again?
>
> It depends on what one means "remove again". This may happen after a
> year or so. While I think I can implement NAND quite fast, I'm not so
> optimistic about MMC.
In this case MMC boot support just not exists. If it will work with an ugly
solution there is no more pressure to develop a correct solution for it...and
it will stay forever.
Keep it in your repository if you need it for your work.
> >> However, there's one bad thing: it's better to add at least one board to
> >> Kconfig with the new arch.
> >
> > ?
>
> If there are no BOARDINFO and board-y defined, barebox cannot be built.
> So one cannot compile barebox with CONFIG_ARCH_something if there are no
> boards utilizing it, right? How to test the compilation then? Is it Ok?
But you can't first add the consumer of a new API (=board file) and after that
the API itself!
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only)
2012-05-14 13:07 ` Juergen Beisert
@ 2012-05-14 13:38 ` Alexey Galakhov
0 siblings, 0 replies; 28+ messages in thread
From: Alexey Galakhov @ 2012-05-14 13:38 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
Hi Juergen,
I mostly finished rebasing the patches according to your comments.
Now looks like that:
* Support most Samsung SoCs in S3C serial driver
* Fine split S3C arch dependencies from generic code
* Add support for Samsung S5P architecture (S5PV210)
* S5P boot header and image generator
* S5P lowlevel clock init
* S5P DRAM support
* Add FriendlyArm Tiny210 board (S5PV210)
Lowlevel clock and DRAM inits may be skipped for 2nd stage only
bootloader. iROM support is now part of board's lowlevel.c and has
nothing to do with mach-samsung.
Alex
On 14.05.2012 19:07, Juergen Beisert wrote:
> Hi Alexey,
>
> Alexey Galakhov wrote:
>>>> Using iROM to boot is generally a bad idea, but there's no alternative
>>>> right now.
>>>
>>> For you there might be no alternative right now. But for Barebox its all
>>> right if only a basic support for this new CPU is available.
>>
>> Even if it's not bootable?
>
> At least it can act as a second stage bootloader (network boot for example).
> This is also the stage at which my S3C6410 currently is.
>
>> Ok, there's better plan. Instead of adding iROM in a separate file, I'll
>> just call its magic address in board's lowlevel init. So this will be
>> for tiny210 only.
>>
>>> Skip the iROM entirely in your patch series if you want to remove it
>>> later on. What sense would it make to include it and then remove it
>>> again?
>>
>> It depends on what one means "remove again". This may happen after a
>> year or so. While I think I can implement NAND quite fast, I'm not so
>> optimistic about MMC.
>
> In this case MMC boot support just not exists. If it will work with an ugly
> solution there is no more pressure to develop a correct solution for it...and
> it will stay forever.
> Keep it in your repository if you need it for your work.
>
>>>> However, there's one bad thing: it's better to add at least one board to
>>>> Kconfig with the new arch.
>>>
>>> ?
>>
>> If there are no BOARDINFO and board-y defined, barebox cannot be built.
>> So one cannot compile barebox with CONFIG_ARCH_something if there are no
>> boards utilizing it, right? How to test the compilation then? Is it Ok?
>
> But you can't first add the consumer of a new API (=board file) and after that
> the API itself!
>
> jbe
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2012-05-14 13:38 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-12 16:23 [Pull request] Minimal S5PV210 support Alexey Galakhov
2012-05-13 9:09 ` Sascha Hauer
2012-05-13 12:39 ` [PATCH 0/9] " Alexey Galakhov
2012-05-13 12:39 ` [PATCH 1/9] Support most Samsung SoCs in S3C serial driver Alexey Galakhov
2012-05-13 12:39 ` [PATCH 2/9] Fine split S3C arch dependencies from generic code Alexey Galakhov
2012-05-14 8:03 ` Juergen Beisert
2012-05-14 8:54 ` Alexey Galakhov
2012-05-14 8:57 ` Sascha Hauer
2012-05-14 8:59 ` Alexey Galakhov
2012-05-14 9:00 ` Juergen Beisert
2012-05-14 9:30 ` Alexey Galakhov
2012-05-14 8:12 ` Sascha Hauer
2012-05-13 12:40 ` [PATCH 3/9] Minimal S5PV210 + Tiny210 support (2nd stage only) Alexey Galakhov
2012-05-14 8:13 ` Juergen Beisert
2012-05-14 8:57 ` Alexey Galakhov
2012-05-14 9:04 ` Juergen Beisert
[not found] ` <4FB0D058.3070206@gmail.com>
2012-05-14 9:57 ` Juergen Beisert
2012-05-14 11:07 ` Alexey Galakhov
2012-05-14 13:07 ` Juergen Beisert
2012-05-14 13:38 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 4/9] S5PV210 iROM magic boot code Alexey Galakhov
2012-05-14 7:51 ` Sascha Hauer
2012-05-14 8:55 ` Alexey Galakhov
2012-05-13 12:40 ` [PATCH 5/9] S5P DRAM support Alexey Galakhov
2012-05-13 12:40 ` [PATCH 6/9] S5P lowlevel clock init Alexey Galakhov
2012-05-13 12:40 ` [PATCH 7/9] Revert "S5PV210 iROM magic boot code" Alexey Galakhov
2012-05-13 12:40 ` [PATCH 8/9] S5P iROM boot support - improved Alexey Galakhov
2012-05-13 12:40 ` [PATCH 9/9] S5P boot header and image generator Alexey Galakhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox