From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 16/16] eukrea_cpuimx25&35: update defconfig
Date: Thu, 17 May 2012 19:45:44 +0200 [thread overview]
Message-ID: <20120517174544.GG30400@pengutronix.de> (raw)
In-Reply-To: <1337269578-20570-16-git-send-email-eric@eukrea.com>
On Thu, May 17, 2012 at 05:46:18PM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric@eukrea.com>
> ---
> arch/arm/configs/eukrea_cpuimx25_defconfig | 10 +++-------
> arch/arm/configs/eukrea_cpuimx35_defconfig | 9 +++------
That's the third time these defconfigs are updated in this series. Is
this necessary?
Sascha
> 2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/configs/eukrea_cpuimx25_defconfig b/arch/arm/configs/eukrea_cpuimx25_defconfig
> index 32833f8..94ae670 100644
> --- a/arch/arm/configs/eukrea_cpuimx25_defconfig
> +++ b/arch/arm/configs/eukrea_cpuimx25_defconfig
> @@ -13,7 +13,6 @@ CONFIG_GLOB=y
> CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> -CONFIG_MENU=y
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_ALL=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> @@ -24,8 +23,6 @@ CONFIG_CMD_SAVEENV=y
> CONFIG_CMD_EXPORT=y
> CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_READLINE=y
> -CONFIG_CMD_MENU=y
> -CONFIG_CMD_MENU_MANAGEMENT=y
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_ECHO_E=y
> CONFIG_CMD_LOADB=y
> @@ -50,13 +47,14 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_UNCOMPRESS=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> +CONFIG_CMD_LED_TRIGGER=y
> CONFIG_NET=y
> CONFIG_NET_DHCP=y
> +CONFIG_NET_NFS=y
> CONFIG_NET_PING=y
> CONFIG_NET_TFTP=y
> CONFIG_NET_TFTP_PUSH=y
> CONFIG_NET_NETCONSOLE=y
> -CONFIG_NET_RESOLV=y
> CONFIG_DRIVER_NET_FEC_IMX=y
> # CONFIG_SPI is not set
> CONFIG_I2C=y
> @@ -64,9 +62,6 @@ CONFIG_I2C_IMX=y
> CONFIG_MTD=y
> CONFIG_MTD_RAW_DEVICE=y
> CONFIG_NAND=y
> -# CONFIG_NAND_ECC_SOFT is not set
> -# CONFIG_NAND_ECC_HW_SYNDROME is not set
> -# CONFIG_NAND_ECC_HW_NONE is not set
> CONFIG_NAND_IMX=y
> CONFIG_USB=y
> CONFIG_USB_EHCI=y
> @@ -80,6 +75,7 @@ CONFIG_MCI=y
> CONFIG_MCI_IMX_ESDHC=y
> CONFIG_LED=y
> CONFIG_LED_GPIO=y
> +CONFIG_LED_TRIGGERS=y
> CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> CONFIG_FS_FAT_LFN=y
> diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
> index 44be126..a888765 100644
> --- a/arch/arm/configs/eukrea_cpuimx35_defconfig
> +++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
> @@ -14,7 +14,6 @@ CONFIG_GLOB=y
> CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> -CONFIG_MENU=y
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_ALL=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> @@ -25,8 +24,6 @@ CONFIG_CMD_SAVEENV=y
> CONFIG_CMD_EXPORT=y
> CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_READLINE=y
> -CONFIG_CMD_MENU=y
> -CONFIG_CMD_MENU_MANAGEMENT=y
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_ECHO_E=y
> CONFIG_CMD_LOADB=y
> @@ -51,8 +48,10 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_UNCOMPRESS=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> +CONFIG_CMD_LED_TRIGGER=y
> CONFIG_NET=y
> CONFIG_NET_DHCP=y
> +CONFIG_NET_NFS=y
> CONFIG_NET_PING=y
> CONFIG_NET_TFTP=y
> CONFIG_NET_TFTP_PUSH=y
> @@ -64,9 +63,6 @@ CONFIG_I2C_IMX=y
> CONFIG_MTD=y
> CONFIG_MTD_RAW_DEVICE=y
> CONFIG_NAND=y
> -# CONFIG_NAND_ECC_SOFT is not set
> -# CONFIG_NAND_ECC_HW_SYNDROME is not set
> -# CONFIG_NAND_ECC_HW_NONE is not set
> CONFIG_NAND_IMX=y
> CONFIG_USB=y
> CONFIG_USB_EHCI=y
> @@ -80,6 +76,7 @@ CONFIG_MCI=y
> CONFIG_MCI_IMX_ESDHC=y
> CONFIG_LED=y
> CONFIG_LED_GPIO=y
> +CONFIG_LED_TRIGGERS=y
> CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> CONFIG_FS_FAT_LFN=y
> --
> 1.7.7.6
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-05-17 17:45 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-17 15:46 [PATCH 01/16] eukrea_cpuimx25: workaround ENGcm09152 Eric Bénard
2012-05-17 15:46 ` [PATCH 02/16] eukrea_cpuimx25: add display choice in environment Eric Bénard
2012-05-17 15:46 ` [PATCH 03/16] eukrea_cpuimx25: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 04/16] eukrea_cpuimx35: add display choice in environment Eric Bénard
2012-05-17 15:46 ` [PATCH 05/16] eukrea_cpuimx35: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 06/16] eukrea_cpuimx51: updated env Eric Bénard
2012-05-17 15:46 ` [PATCH 07/16] eukrea_cpuimx51: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 08/16] eukrea_cpuimx25: use switch action to launch usbserial or dfu Eric Bénard
2012-05-17 15:46 ` [PATCH 09/16] eukrea_cpuimx35: " Eric Bénard
2012-05-17 15:46 ` [PATCH 10/16] fs/tftp: depend on NET_TFTP Eric Bénard
2012-05-17 17:54 ` Sascha Hauer
2012-05-26 9:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-31 18:24 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 11/16] iim: don't try to set ethaddr when NET is not selected Eric Bénard
2012-05-17 17:40 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 12/16] fec_imx: restart aneg at open and not at init Eric Bénard
2012-05-17 17:36 ` Sascha Hauer
2012-05-17 19:32 ` Eric Bénard
2012-05-18 8:40 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 13/16] eukrea_cpuimx25: fix PHY address Eric Bénard
2012-05-17 15:46 ` [PATCH 14/16] eukrea_cpuimx35: " Eric Bénard
2012-05-17 17:42 ` Sascha Hauer
2012-05-17 19:33 ` Eric Bénard
2012-05-17 15:46 ` [PATCH 15/16] eukrea_cpuimx25&35: update init_board Eric Bénard
2012-05-17 15:46 ` [PATCH 16/16] eukrea_cpuimx25&35: update defconfig Eric Bénard
2012-05-17 17:45 ` Sascha Hauer [this message]
2012-05-17 19:34 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120517174544.GG30400@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox