From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp3-g21.free.fr ([2a01:e0c:1:1599::12]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1SWuKs-0001Sn-26 for barebox@lists.infradead.org; Tue, 22 May 2012 19:01:36 +0000 Date: Tue, 22 May 2012 21:01:19 +0200 From: Eric =?ISO-8859-1?B?QuluYXJk?= Message-ID: <20120522210119.00028117@eb-e6520> In-Reply-To: <20120522184838.GN30400@pengutronix.de> References: <20120522184838.GN30400@pengutronix.de> Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: SD card probe failure To: Sascha Hauer Cc: barebox@lists.infradead.org Hi, Le Tue, 22 May 2012 20:48:38 +0200, Sascha Hauer a =E9crit : > Does the SD card work in the first stage loader? If yes, you could try > to remove the mux setup from barebox, so that you can be sure that you > do not misconfigure things that were already configured correctly. > I have no hardware handy to test the driver on a i.MX25, but Erics > Eukrea board has MMC support, so I believe the driver should work in > general. > = I don't remembed if SD is working under barebox on the i.MX25 but at least our default configuration was booting from a SDCard the last time I tested it. Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox