From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1SXbfV-0000iD-5x for barebox@lists.infradead.org; Thu, 24 May 2012 17:17:45 +0000 Date: Thu, 24 May 2012 19:17:38 +0200 From: Sascha Hauer Message-ID: <20120524171738.GZ30400@pengutronix.de> References: <20120522184240.GM30400@pengutronix.de> <20120523134733.6164c4fb@eb-e6520> <20120524145837.42085b83@eb-e6520> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Booting mx25 based device from SD and NOR To: Roberto Nibali Cc: barebox@lists.infradead.org On Thu, May 24, 2012 at 03:18:13PM +0200, Roberto Nibali wrote: > Hi Eric > = > On Thu, May 24, 2012 at 2:58 PM, Eric B=E9nard wrote: > = > = > = > I support WEIM configuration is done in the low level part, isn't it? = You don't need to do it in lowlevel init, just before registering the cfi device is enough. Usually it's good habit to do only the absolutely necessary things in lowlevel init. Doing things later increases the chance that you get useful debug output when something goes wrong Sascha -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox