From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2012.07.0
Date: Mon, 2 Jul 2012 11:23:14 +0200 [thread overview]
Message-ID: <20120702092314.GJ2698@pengutronix.de> (raw)
Hi all,
Time for a july release. Here is what happened since the last
release.
Sascha
The following changes since commit 94418c2d0d3d7dbaa6995fb53f00a5d5fc9f4028:
Release v2012.06.0 (2012-06-06 14:10:34 +0200)
are available in the git repository at:
git://git.pengutronix.de/git/barebox.git tags/v2012.07.0
for you to fetch changes up to 9d0b51ea7e5b3fece57f91e17349b79a5b4b37e7:
Release v2012.07.0 (2012-07-02 10:31:52 +0200)
----------------------------------------------------------------
Release v2012.07.0
----------------------------------------------------------------
Alan Ott (2):
common: Make MENU depend on PROCESS_ESCAPE_SEQUENCE
README: change path to sandbox environment
Alexander Shiyan (20):
i2c: Added switch for allowing usage 16bit register addresses
PCM038: Update board description
PCM038: Call power_init() after initializing SPI.
PCM038: Remove unused includes
PCM038: Initial PCM970 development board support
Removed duplicate definition for DEVFS_PARTITION_xxx
Add compressed barebox_default_env to .gitignore
PCM038: Move USBH2 initialization to PCM970
PCM038: Removed unnecessary call to gpio_set_value
i.MX SPI: Setup SPI chipselect to inactive state while initializing device
PCM038: Remove now unused preset for SPI chipselect.
i.MX51: Changed naming registers and procedures for SPI
i.MX51: Added helper for SDHC3 registration.
PCM970: Added support for CompactFlash
i.MX51: Raise frequency for SDHC by switch to PLL2 source
i.MX51 clock: Added lp_apm clock support for frequency calculations.
i.MX51 clock: Added USB clock to dump_clocks command.
block: Fix printf warning
Unused files removed
commands: uncompress: fix description
Alexey Galakhov (6):
Support most Samsung SoCs in S3C serial driver
Make S3C24xx config options available for all S3Cs
Split S3C generic and S3C24xx specific code
Add support for Samsung S5P architecture (S5PV210)
S5P boot header and image generator
S5P lowlevel clock init
Anand Gadiyar (3):
panda: add i2c and twlcore to panda
panda: add LED support
panda: update defconfig for i2c and led support
Antony Pavlov (19):
MIPS: start.S: add "barebox" label at _start + 0x10
MIPS: bootm: add "MIPS barebox" handler
MIPS: add common header file for DEBUG_LL via NS16550
MIPS: malta: use common DEBUG_LL code for NS16550
fix typo funtion -> function
MIPS: add XBurst processor family support
MIPS: XBurst: add JZ4755 CPU support
MIPS: XBurst: add Ritmix RZX-50 board support
MIPS: add defconfig for Ritmix RZX-50 board
MIPS: introduce C architecture-specific low-level init
MIPS: import CPU and cache detection code from Linux 3.4
MIPS: cpuinfo: import CPU message from Linux 3.4
ARM: initial Tegra support
ARM: Tegra: add Toshiba AC100 support
usb: set MAXINTERFACES = 16
toshiba_ac100: add USB host support
toshiba_ac100: add defconfig
MIPS: make possible board-specific header files
MIPS: XBurst: suitable solution for per-board debug_ll
Dirk Hörner (3):
hostcc tools: include "compiler.h", fix included headers
scripts/compiler.h: fixup endianess defines on OS X
scripts/genenv: always pass template to mktemp
Eric Bénard (9):
eukrea_cpuimx25: workaround ENGcm09152
eukrea_cpuimx25: add display choice in environment
eukrea_cpuimx35: add display choice in environment
eukrea_cpuimx51: updated env
eukrea_cpuimx25/35/51: update defconfig
eukrea_cpuimx25&35: use switch action to launch usbserial or dfu
iim: fix compilation when NET is not selected
eukrea_cpuimx25: fix PHY address
eukrea_cpuimx35: fix PHY address and clean code
Jan Luebbe (3):
arm: update mach-types
ohci-hcd: use dma_flush/inv_range to allow using the driver with enabled MMU
drivers/spi/spi.c: use DEVICE_ID_DYNAMIC when allocating a struct device_d
Jan Weitzel (1):
ramfs: rember last accessed chunk
Johannes Stezenbach (5):
m25p80: prevent endless loop in erase
m25p80: allow erase to be interrupted
m25p80: progressbar tweak
devfs: don't erase past the end of the partition
fs: limit flash erase and protect to the partiton boundary
Krzysztof Halasa (7):
ARM: remove unused struct param_struct and related info.
Fix big endian MMIO primitives.
ARM: put a valid "barebox" signature in the header on big-endian systems.
NOR flash: reduce size of cfiword_t if not using 64-bit bus.
Fix sha224sum panic by registering SHA224 hash name.
Fix a panic in crypto hash calculations due to uninitialized variable.
Fix SHA224 to produce 28 bytes of hash (instead of 32).
Renaud Barbier (12):
ppc io.h: update following MMIO primitives fix
ppc reloc.S: use a common trap relocation function
linux/types.h: define phys_size_t
Initial Freescale 85xx Headers.
Initial e500v2 start up code
e500v2 traps and TLB support code
85xx: LAW and LBC initialization
85xx clocking support
MPC85xx start-up support code
Set _text_base to the firmware relocation address
85xx core support build files
Minimal P2020RDB platform support and configuration file
Robert Jarzmik (5):
arm/board: mioa701 align kernel options with kernel mtd
arch/arm: mioa701 make autoboot of Linux work
arch/arm: mioa701 add IPL and DPS1 updater
arch/arm: mioa701 use maximum CPU frequency
arch/arm: mioa701 improve barebox_update script
Sam Ravnborg (1):
kbuild: Use Elfnn_Half as replacement for Elfnn_Section
Sascha Hauer (54):
ARM startup: invalidate I-cache before jumping to relocated binary
parameter: return empty string for unset parameters
parameter: remove unused struct member
Merge branch 'pu/parameter' into next
Make errno a positive value
fs: Add NFS support
timeout: allow to set a variable with the key pressed
add 'global' command
booting: more flexible Linux bootargs generation
Merge branch 'pu/globalvar' into next
add qsort support
glob: Add sorted output support
fs readdir: check for NULL pointer again
magicvar: Add magicvar macro with additional name argument
flexible bootargs: Add magicvar descriptions
Merge branch 'pu/globsort' into next
Merge branch 'pu/magicvar' into next
edit: Add a status line
Merge branch 'pu/edit' into next
Merge branch 'master' into next
lseek: return -1 instead of -errno
bootm: Add default images variables
Add next generation default environment template
ARM pcm038: Switch to new environment
Merge branch 'ppc' into next
run_shell: run again on ctrl-c
Merge branch 'pu/defenv-2' into next
ARM Freescale i.MX51 babbage: switch to new default env
Merge branch 'pu/hush' into next
hush: do not convert to return code too early
defaultenv-2: automount script: run mount only when ifup succeeds
ARM startup: Do call __mmu_cache_flush during startup
Merge branch 'pu/defenv-2' into next
usb storage: fix driver name
usb ehci: Use zalloc to allocate ehci structure
Merge branch 'pu/cache' into next
Merge branch 'pu/hush' into next
ppc 85xx: Fix whitespaces
ARM samsung: disable board selection
block: propagate error code from block_get
block: do not BUG() on failed block_get
usb ehci: Add resource sizes
Merge branch 'next'
ARM qil-a9260: Fix PARTITION_FIXED compilation
blackfin: Fix build due to missing __raw_* io accessors
openrisc: fix build due to redefined phys_size_t
fs tftp: Fix short file transfers
sandbox: fix 64bit build
x86 linux16 command: Add missing include
print out resource_size_t correctly
Merge branch 'pu/sandbox-fixes'
drivers/base: bail out if request_iomem_region fails
ehci: Fix resource size
Release v2012.07.0
Uwe Kleine-König (2):
fix typo addreee -> address
defaultenv: don't overwrite $user in config
.gitignore | 4 +-
Documentation/boards.dox | 2 +
Makefile | 4 +-
README | 2 +-
arch/arm/Kconfig | 12 +
arch/arm/Makefile | 9 +
arch/arm/boards/a9m2410/a9m2410.c | 6 +-
arch/arm/boards/a9m2410/config.h | 2 +-
arch/arm/boards/a9m2410/lowlevel_init.S | 2 +-
arch/arm/boards/a9m2440/a9m2440.c | 6 +-
arch/arm/boards/a9m2440/config.h | 2 +-
arch/arm/boards/a9m2440/lowlevel_init.S | 2 +-
arch/arm/boards/at91rm9200ek/init.c | 4 +-
arch/arm/boards/at91sam9260ek/init.c | 8 +-
arch/arm/boards/at91sam9261ek/init.c | 8 +-
arch/arm/boards/at91sam9263ek/init.c | 12 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 8 +-
arch/arm/boards/at91sam9x5ek/init.c | 8 +-
arch/arm/boards/dss11/init.c | 6 +-
arch/arm/boards/edb93xx/edb93xx.c | 4 +-
arch/arm/boards/eukrea_cpuimx25/env/bin/init_board | 21 +
arch/arm/boards/eukrea_cpuimx25/env/config | 4 +-
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 15 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 4 +-
arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S | 2 +-
arch/arm/boards/eukrea_cpuimx35/env/bin/init_board | 21 +
arch/arm/boards/eukrea_cpuimx35/env/config | 4 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 88 +-
arch/arm/boards/eukrea_cpuimx51/env/config | 10 +-
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 4 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 4 +-
.../boards/freescale-mx25-3-stack/lowlevel_init.S | 2 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 8 +-
.../boards/freescale-mx35-3-stack/lowlevel_init.S | 2 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 4 +-
arch/arm/boards/freescale-mx51-pdk/env/config | 47 -
.../freescale-mx51-pdk/env/init/bootargs-base | 8 +
.../boards/freescale-mx51-pdk/env/init/hostname | 8 +
arch/arm/boards/freescale-mx53-loco/board.c | 4 +-
arch/arm/boards/freescale-mx53-smd/board.c | 4 +-
arch/arm/boards/freescale-mx6-arm2/board.c | 4 +-
arch/arm/boards/guf-cupid/board.c | 4 +-
arch/arm/boards/guf-neso/board.c | 4 +-
arch/arm/boards/imx21ads/lowlevel_init.S | 2 +-
arch/arm/boards/imx27ads/imx27ads.c | 4 +-
arch/arm/boards/karo-tx25/board.c | 4 +-
arch/arm/boards/karo-tx51/tx51.c | 4 +-
arch/arm/boards/mini2440/config.h | 2 +-
arch/arm/boards/mini2440/lowlevel_init.S | 2 +-
arch/arm/boards/mini2440/mini2440.c | 6 +-
arch/arm/boards/mioa701/board.c | 13 +-
arch/arm/boards/mioa701/env/bin/barebox_update | 5 +
arch/arm/boards/mioa701/env/bin/dps1_unlock | 12 +
arch/arm/boards/mioa701/env/bin/dps1_update | 12 +
arch/arm/boards/mioa701/env/bin/init | 19 +-
arch/arm/boards/mioa701/env/data/dps1.raw.gz | Bin 0 -> 1239 bytes
arch/arm/boards/mmccpu/init.c | 4 +-
arch/arm/boards/netx/netx.c | 4 +-
arch/arm/boards/nhk8815/setup.c | 8 +-
arch/arm/boards/panda/board.c | 32 +
arch/arm/boards/pcm027/board.c | 4 +-
arch/arm/boards/pcm037/lowlevel_init.S | 2 +-
arch/arm/boards/pcm037/pcm037.c | 4 +-
arch/arm/boards/pcm038/Makefile | 5 +-
arch/arm/boards/pcm038/env/boot/nand-ubi | 10 +
arch/arm/boards/pcm038/env/config | 52 -
arch/arm/boards/pcm038/env/init/bootargs-base | 8 +
arch/arm/boards/pcm038/env/init/hostname | 8 +
arch/arm/boards/pcm038/env/init/mtdparts-nand | 11 +
arch/arm/boards/pcm038/env/init/mtdparts-nor | 11 +
arch/arm/boards/pcm038/pcm038.c | 183 ++--
arch/arm/boards/pcm038/pcm038.dox | 5 +-
arch/arm/boards/pcm038/pcm970.c | 187 ++++
arch/arm/boards/pcm043/pcm043.c | 8 +-
arch/arm/boards/pcm049/board.c | 6 +-
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 6 +-
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 6 +-
arch/arm/boards/phycard-i.MX27/lowlevel_init.S | 2 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 4 +-
arch/arm/boards/pm9261/init.c | 4 +-
arch/arm/boards/pm9263/init.c | 4 +-
arch/arm/boards/pm9g45/init.c | 4 +-
arch/arm/boards/qil-a9260/init.c | 8 +-
arch/arm/boards/scb9328/scb9328.c | 4 +-
arch/arm/boards/tny-a926x/init.c | 8 +-
arch/arm/boards/toshiba-ac100/Kconfig | 9 +
arch/arm/boards/toshiba-ac100/Makefile | 2 +
arch/arm/boards/toshiba-ac100/board.c | 49 +
arch/arm/boards/toshiba-ac100/config.h | 5 +
arch/arm/boards/toshiba-ac100/serial.c | 43 +
arch/arm/boards/toshiba-ac100/toshiba-ac100.dox | 37 +
arch/arm/boards/tqma53/board.c | 4 +-
arch/arm/boards/usb-a926x/init.c | 8 +-
arch/arm/boards/versatile/versatilepb.c | 4 +-
arch/arm/configs/a9m2410_defconfig | 2 +-
arch/arm/configs/a9m2440_defconfig | 4 +-
arch/arm/configs/eukrea_cpuimx25_defconfig | 17 +-
arch/arm/configs/eukrea_cpuimx35_defconfig | 19 +-
arch/arm/configs/eukrea_cpuimx51_defconfig | 19 +-
arch/arm/configs/freescale_mx51_babbage_defconfig | 16 +-
arch/arm/configs/mini2440_defconfig | 2 +-
arch/arm/configs/panda_defconfig | 8 +-
arch/arm/configs/pcm038_defconfig | 14 +-
arch/arm/configs/toshiba_ac100_defconfig | 39 +
arch/arm/cpu/cache-armv4.S | 1 -
arch/arm/cpu/cache-armv5.S | 1 -
arch/arm/cpu/cache-armv6.S | 1 -
arch/arm/cpu/cache-armv7.S | 1 -
arch/arm/cpu/start.c | 11 +-
arch/arm/include/asm/barebox-arm-head.h | 3 +-
arch/arm/include/asm/setup.h | 53 -
arch/arm/lib/armlinux.c | 2 +-
arch/arm/lib/bootm.c | 3 +-
arch/arm/mach-imx/Kconfig | 10 +
arch/arm/mach-imx/imx51.c | 2 +-
arch/arm/mach-imx/include/mach/devices-imx51.h | 13 +-
arch/arm/mach-imx/include/mach/imx27-regs.h | 13 +
arch/arm/mach-imx/include/mach/imx51-regs.h | 6 +-
arch/arm/mach-imx/speed-imx51.c | 50 +-
arch/arm/mach-omap/devices-gpmc-nand.c | 2 +-
arch/arm/mach-omap/xload.c | 2 +-
arch/arm/mach-samsung/Kconfig | 50 +-
arch/arm/mach-samsung/Makefile | 7 +-
arch/arm/mach-samsung/clocks-s5pcxx.c | 98 ++
arch/arm/mach-samsung/generic.c | 113 --
arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++
arch/arm/mach-samsung/include/mach/gpio.h | 3 +
arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798 ++++++++++++++
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 25 +-
arch/arm/mach-samsung/include/mach/s3c-generic.h | 9 +
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 56 +-
.../arm/mach-samsung/include/mach/s3c24xx-clocks.h | 24 +
arch/arm/mach-samsung/include/mach/s3c24xx-gpio.h | 6 +-
arch/arm/mach-samsung/include/mach/s3c24xx-iomap.h | 69 ++
arch/arm/mach-samsung/include/mach/s3c24xx-nand.h | 2 +-
arch/arm/mach-samsung/include/mach/s5pcxx-clocks.h | 55 +
arch/arm/mach-samsung/include/mach/s5pcxx-iomap.h | 49 +
.../{lowlevel-init.S => lowlevel-s3c24x0.S} | 12 +-
arch/arm/mach-samsung/lowlevel-s5pcxx.c | 61 ++
arch/arm/mach-samsung/mem-s3c24x0.c | 143 +++
arch/arm/mach-samsung/s3c24xx-clocks.c | 17 +
arch/arm/mach-tegra/Kconfig | 19 +
arch/arm/mach-tegra/Makefile | 2 +
arch/arm/mach-tegra/clock.c | 59 ++
arch/arm/mach-tegra/include/mach/debug_ll.h | 45 +
arch/arm/mach-tegra/include/mach/iomap.h | 292 ++++++
arch/arm/mach-tegra/reset.c | 42 +
arch/arm/tools/mach-types | 193 +++-
arch/blackfin/boards/ipe337/ipe337.c | 4 +-
arch/blackfin/include/asm/io.h | 7 +
arch/blackfin/lib/blackfin_linux.c | 2 +-
arch/mips/Kconfig | 8 +
arch/mips/Makefile | 5 +
arch/mips/boards/qemu-malta/init.c | 4 +-
arch/mips/boards/rzx50/Kconfig | 6 +
arch/mips/boards/rzx50/Makefile | 1 +
arch/mips/boards/rzx50/config.h | 19 +
arch/mips/boards/rzx50/include/board/debug_ll.h | 29 +
arch/mips/boards/rzx50/rzx50.dox | 46 +
arch/mips/boards/rzx50/serial.c | 66 ++
arch/mips/boot/Makefile | 1 +
arch/mips/boot/main_entry.c | 52 +
arch/mips/boot/start.S | 26 +-
arch/mips/configs/rzx50_defconfig | 29 +
arch/mips/include/asm/bitops.h | 2 +-
arch/mips/include/asm/cpu-features.h | 254 +++++
arch/mips/include/asm/cpu-info.h | 71 ++
arch/mips/include/asm/cpu.h | 143 +++
arch/mips/include/debug_ll_ns16550.h | 40 +
arch/mips/lib/Makefile | 5 +
arch/mips/lib/bootm.c | 43 +
arch/mips/lib/c-r4k.c | 97 ++
arch/mips/lib/cpu-probe.c | 143 +++
arch/mips/lib/cpuinfo.c | 27 +-
arch/mips/mach-malta/include/mach/debug_ll.h | 11 +-
arch/mips/mach-malta/include/mach/hardware.h | 1 +
arch/mips/mach-mips.dox | 4 +
arch/mips/mach-xburst/Kconfig | 21 +
arch/mips/mach-xburst/Makefile | 1 +
arch/mips/mach-xburst/csrc-jz4750.c | 61 ++
arch/mips/mach-xburst/include/mach/debug_ll.h | 30 +
arch/mips/mach-xburst/include/mach/jz4750d_regs.h | 80 ++
arch/mips/mach-xburst/mach-xburst.dox | 7 +
arch/mips/mach-xburst/reset-jz4750.c | 46 +
arch/nios2/boards/generic/generic.c | 4 +-
arch/nios2/lib/bootm.c | 2 +-
arch/openrisc/include/asm/types.h | 2 -
arch/ppc/Kconfig | 3 +
arch/ppc/Makefile | 8 +
arch/ppc/boards/freescale-p2020rdb/Makefile | 4 +
arch/ppc/boards/freescale-p2020rdb/barebox.lds.S | 144 +++
arch/ppc/boards/freescale-p2020rdb/config.h | 98 ++
arch/ppc/boards/freescale-p2020rdb/law.c | 31 +
arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 230 +++++
arch/ppc/boards/freescale-p2020rdb/tlb.c | 62 ++
arch/ppc/boards/pcm030/pcm030.c | 4 +-
arch/ppc/configs/p2020rdb_defconfig | 23 +
arch/ppc/cpu-85xx/Makefile | 4 +
arch/ppc/cpu-85xx/fixed_ivor.S | 61 ++
arch/ppc/cpu-85xx/resetvec.S | 2 +
arch/ppc/cpu-85xx/start.S | 1085 ++++++++++++++++++++
arch/ppc/cpu-85xx/tlb.c | 175 ++++
arch/ppc/cpu-85xx/traps.c | 272 +++++
arch/ppc/include/asm/cache.h | 2 +
arch/ppc/include/asm/config.h | 44 +
arch/ppc/include/asm/fsl_ddr_sdram.h | 33 +
arch/ppc/include/asm/fsl_law.h | 91 ++
arch/ppc/include/asm/fsl_lbc.h | 61 ++
arch/ppc/include/asm/io.h | 28 +
arch/ppc/lib/Makefile | 1 +
arch/ppc/lib/board.c | 4 +
arch/ppc/lib/reloc.S | 47 +
arch/ppc/mach-mpc5xxx/start.S | 14 -
arch/ppc/mach-mpc85xx/Kconfig | 41 +
arch/ppc/mach-mpc85xx/Makefile | 8 +
arch/ppc/mach-mpc85xx/cpu.c | 85 ++
arch/ppc/mach-mpc85xx/cpu_init.c | 127 +++
arch/ppc/mach-mpc85xx/cpuid.c | 73 ++
arch/ppc/mach-mpc85xx/fsl_law.c | 160 +++
arch/ppc/mach-mpc85xx/fsl_lbc.c | 17 +
arch/ppc/mach-mpc85xx/include/mach/clocks.h | 18 +
.../ppc/mach-mpc85xx/include/mach/config_mpc85xx.h | 39 +
arch/ppc/mach-mpc85xx/include/mach/early_udelay.h | 40 +
arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 132 +++
arch/ppc/mach-mpc85xx/include/mach/mmu.h | 47 +
arch/ppc/mach-mpc85xx/include/mach/mpc85xx.h | 23 +
arch/ppc/mach-mpc85xx/speed.c | 104 ++
arch/ppc/mach-mpc85xx/time.c | 53 +
arch/sandbox/include/asm/types.h | 7 +
commands/Kconfig | 20 +
commands/Makefile | 1 +
commands/bootm.c | 66 +-
commands/edit.c | 17 +-
commands/global.c | 62 ++
commands/i2c.c | 26 +-
commands/iomem.c | 3 +-
commands/linux16.c | 3 +-
commands/ls.c | 6 +-
commands/mem.c | 10 +-
commands/partition.c | 2 +-
commands/saveenv.c | 6 +-
commands/timeout.c | 16 +-
commands/uncompress.c | 4 +-
common/Kconfig | 29 +-
common/Makefile | 9 +
common/block.c | 30 +-
common/bootargs.c | 83 ++
common/digest.c | 2 +-
common/env.c | 2 +-
common/environment.c | 6 +-
common/filetype.c | 2 +
common/globalvar.c | 65 ++
common/hush.c | 26 +-
common/misc.c | 2 +-
common/oftree.c | 3 +-
crypto/sha2.c | 4 +-
defaultenv-2/base/bin/boot | 18 +
defaultenv-2/base/bin/bootargs-ip | 11 +
defaultenv-2/base/bin/bootargs-ip-barebox | 7 +
defaultenv-2/base/bin/bootargs-ip-dhcp | 5 +
defaultenv-2/base/bin/bootargs-ip-none | 5 +
defaultenv-2/base/bin/bootargs-root-initrd | 11 +
defaultenv-2/base/bin/bootargs-root-jffs2 | 9 +
defaultenv-2/base/bin/bootargs-root-nfs | 15 +
defaultenv-2/base/bin/bootargs-root-ubi | 13 +
defaultenv-2/base/bin/ifup | 59 ++
defaultenv-2/base/bin/init | 46 +
defaultenv-2/base/bin/mtdparts-add | 49 +
defaultenv-2/base/boot/initrd | 16 +
defaultenv-2/base/boot/net | 12 +
defaultenv-2/base/data/ansi-colors | 26 +
defaultenv-2/base/data/boot-template | 16 +
defaultenv-2/base/init/automount | 27 +
defaultenv-2/base/init/bootargs-base | 8 +
defaultenv-2/base/init/general | 18 +
defaultenv-2/base/init/hostname | 8 +
defaultenv-2/base/init/prompt | 7 +
defaultenv-2/base/network/eth0 | 15 +
defaultenv-2/menu/menu/boot-entries-collect | 13 +
defaultenv-2/menu/menu/boot-entries-edit | 20 +
defaultenv-2/menu/menu/boot-entries-remove | 18 +
defaultenv-2/menu/menu/boot-menu-add-entry | 5 +
defaultenv-2/menu/menu/boot-menu-new-boot-entry | 21 +
defaultenv-2/menu/menu/init-entries-collect | 9 +
defaultenv-2/menu/menu/init-entries-edit | 20 +
defaultenv-2/menu/menu/init-menu-add-entry | 3 +
defaultenv-2/menu/menu/mainmenu | 28 +
defaultenv/config | 4 +-
drivers/base/driver.c | 5 +-
drivers/base/resource.c | 2 +
drivers/mtd/nand/nand_imx.c | 2 +-
drivers/mtd/nand/nand_s3c24xx.c | 10 +-
drivers/nor/cfi_flash.h | 10 +
drivers/nor/m25p80.c | 8 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/serial_s3c.c | 55 +-
drivers/spi/imx_spi.c | 4 +
drivers/spi/spi.c | 2 +
drivers/usb/host/ehci-hcd.c | 2 +-
drivers/usb/host/ohci-hcd.c | 4 +
drivers/usb/storage/usb.c | 2 +-
fs/Kconfig | 4 +
fs/Makefile | 1 +
fs/devfs.c | 3 +
fs/fs.c | 363 ++++---
fs/nfs.c | 1054 +++++++++++++++++++
fs/ramfs.c | 47 +-
fs/tftp.c | 3 +-
include/boot.h | 16 +
include/envfs.h | 2 +
include/filetype.h | 1 +
include/globalvar.h | 12 +
include/image.h | 2 +-
include/io.h | 21 +-
include/linux/ioport.h | 6 +
include/linux/mtd/nand.h | 2 +-
include/linux/types.h | 2 +
include/magicvar.h | 8 +-
include/net.h | 7 +-
include/param.h | 1 -
include/partition.h | 3 -
include/qsort.h | 7 +
include/usb/usb.h | 2 +-
lib/Kconfig | 3 +
lib/Makefile | 1 +
lib/glob.c | 11 +-
lib/lzo/modules.builtin | 2 -
lib/make_directory.c | 13 +-
lib/parameter.c | 18 +-
lib/qsort.c | 79 ++
lib/zlib_inflate/modules.builtin | 1 -
scripts/Makefile | 1 +
scripts/bareboxenv.c | 2 +
scripts/compiler.h | 3 +
scripts/genenv | 2 +-
scripts/mod/modpost.c | 2 +-
scripts/mod/modpost.h | 4 +-
scripts/s5p_cksum.c | 140 +++
338 files changed, 10728 insertions(+), 1102 deletions(-)
delete mode 100644 arch/arm/boards/freescale-mx51-pdk/env/config
create mode 100644 arch/arm/boards/freescale-mx51-pdk/env/init/bootargs-base
create mode 100644 arch/arm/boards/freescale-mx51-pdk/env/init/hostname
create mode 100644 arch/arm/boards/mioa701/env/bin/dps1_unlock
create mode 100644 arch/arm/boards/mioa701/env/bin/dps1_update
create mode 100644 arch/arm/boards/mioa701/env/data/dps1.raw.gz
create mode 100644 arch/arm/boards/pcm038/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/pcm038/env/config
create mode 100644 arch/arm/boards/pcm038/env/init/bootargs-base
create mode 100644 arch/arm/boards/pcm038/env/init/hostname
create mode 100644 arch/arm/boards/pcm038/env/init/mtdparts-nand
create mode 100644 arch/arm/boards/pcm038/env/init/mtdparts-nor
create mode 100644 arch/arm/boards/pcm038/pcm970.c
create mode 100644 arch/arm/boards/toshiba-ac100/Kconfig
create mode 100644 arch/arm/boards/toshiba-ac100/Makefile
create mode 100644 arch/arm/boards/toshiba-ac100/board.c
create mode 100644 arch/arm/boards/toshiba-ac100/config.h
create mode 100644 arch/arm/boards/toshiba-ac100/serial.c
create mode 100644 arch/arm/boards/toshiba-ac100/toshiba-ac100.dox
create mode 100644 arch/arm/configs/toshiba_ac100_defconfig
create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h
create mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-clocks.h
create mode 100644 arch/arm/mach-samsung/include/mach/s3c24xx-iomap.h
create mode 100644 arch/arm/mach-samsung/include/mach/s5pcxx-clocks.h
create mode 100644 arch/arm/mach-samsung/include/mach/s5pcxx-iomap.h
rename arch/arm/mach-samsung/{lowlevel-init.S => lowlevel-s3c24x0.S} (96%)
create mode 100644 arch/arm/mach-samsung/lowlevel-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/mem-s3c24x0.c
create mode 100644 arch/arm/mach-tegra/Kconfig
create mode 100644 arch/arm/mach-tegra/Makefile
create mode 100644 arch/arm/mach-tegra/clock.c
create mode 100644 arch/arm/mach-tegra/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-tegra/include/mach/iomap.h
create mode 100644 arch/arm/mach-tegra/reset.c
create mode 100644 arch/mips/boards/rzx50/Kconfig
create mode 100644 arch/mips/boards/rzx50/Makefile
create mode 100644 arch/mips/boards/rzx50/config.h
create mode 100644 arch/mips/boards/rzx50/include/board/debug_ll.h
create mode 100644 arch/mips/boards/rzx50/rzx50.dox
create mode 100644 arch/mips/boards/rzx50/serial.c
create mode 100644 arch/mips/boot/main_entry.c
create mode 100644 arch/mips/configs/rzx50_defconfig
create mode 100644 arch/mips/include/asm/cpu-features.h
create mode 100644 arch/mips/include/asm/cpu-info.h
create mode 100644 arch/mips/include/asm/cpu.h
create mode 100644 arch/mips/include/debug_ll_ns16550.h
create mode 100644 arch/mips/lib/bootm.c
create mode 100644 arch/mips/lib/c-r4k.c
create mode 100644 arch/mips/lib/cpu-probe.c
create mode 100644 arch/mips/mach-xburst/Kconfig
create mode 100644 arch/mips/mach-xburst/Makefile
create mode 100644 arch/mips/mach-xburst/csrc-jz4750.c
create mode 100644 arch/mips/mach-xburst/include/mach/debug_ll.h
create mode 100644 arch/mips/mach-xburst/include/mach/jz4750d_regs.h
create mode 100644 arch/mips/mach-xburst/mach-xburst.dox
create mode 100644 arch/mips/mach-xburst/reset-jz4750.c
create mode 100644 arch/ppc/boards/freescale-p2020rdb/Makefile
create mode 100644 arch/ppc/boards/freescale-p2020rdb/barebox.lds.S
create mode 100644 arch/ppc/boards/freescale-p2020rdb/config.h
create mode 100644 arch/ppc/boards/freescale-p2020rdb/law.c
create mode 100644 arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
create mode 100644 arch/ppc/boards/freescale-p2020rdb/tlb.c
create mode 100644 arch/ppc/configs/p2020rdb_defconfig
create mode 100644 arch/ppc/cpu-85xx/Makefile
create mode 100644 arch/ppc/cpu-85xx/fixed_ivor.S
create mode 100644 arch/ppc/cpu-85xx/resetvec.S
create mode 100644 arch/ppc/cpu-85xx/start.S
create mode 100644 arch/ppc/cpu-85xx/tlb.c
create mode 100644 arch/ppc/cpu-85xx/traps.c
create mode 100644 arch/ppc/include/asm/config.h
create mode 100644 arch/ppc/include/asm/fsl_ddr_sdram.h
create mode 100644 arch/ppc/include/asm/fsl_law.h
create mode 100644 arch/ppc/include/asm/fsl_lbc.h
create mode 100644 arch/ppc/lib/reloc.S
create mode 100644 arch/ppc/mach-mpc85xx/Kconfig
create mode 100644 arch/ppc/mach-mpc85xx/Makefile
create mode 100644 arch/ppc/mach-mpc85xx/cpu.c
create mode 100644 arch/ppc/mach-mpc85xx/cpu_init.c
create mode 100644 arch/ppc/mach-mpc85xx/cpuid.c
create mode 100644 arch/ppc/mach-mpc85xx/fsl_law.c
create mode 100644 arch/ppc/mach-mpc85xx/fsl_lbc.c
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/clocks.h
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/config_mpc85xx.h
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/early_udelay.h
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/mmu.h
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/mpc85xx.h
create mode 100644 arch/ppc/mach-mpc85xx/speed.c
create mode 100644 arch/ppc/mach-mpc85xx/time.c
create mode 100644 commands/global.c
create mode 100644 common/bootargs.c
create mode 100644 common/globalvar.c
create mode 100644 defaultenv-2/base/bin/boot
create mode 100644 defaultenv-2/base/bin/bootargs-ip
create mode 100644 defaultenv-2/base/bin/bootargs-ip-barebox
create mode 100644 defaultenv-2/base/bin/bootargs-ip-dhcp
create mode 100644 defaultenv-2/base/bin/bootargs-ip-none
create mode 100644 defaultenv-2/base/bin/bootargs-root-initrd
create mode 100644 defaultenv-2/base/bin/bootargs-root-jffs2
create mode 100644 defaultenv-2/base/bin/bootargs-root-nfs
create mode 100644 defaultenv-2/base/bin/bootargs-root-ubi
create mode 100644 defaultenv-2/base/bin/ifup
create mode 100644 defaultenv-2/base/bin/init
create mode 100644 defaultenv-2/base/bin/mtdparts-add
create mode 100644 defaultenv-2/base/boot/initrd
create mode 100644 defaultenv-2/base/boot/net
create mode 100644 defaultenv-2/base/data/ansi-colors
create mode 100644 defaultenv-2/base/data/boot-template
create mode 100644 defaultenv-2/base/init/automount
create mode 100644 defaultenv-2/base/init/bootargs-base
create mode 100644 defaultenv-2/base/init/general
create mode 100644 defaultenv-2/base/init/hostname
create mode 100644 defaultenv-2/base/init/prompt
create mode 100644 defaultenv-2/base/network/eth0
create mode 100644 defaultenv-2/menu/menu/boot-entries-collect
create mode 100644 defaultenv-2/menu/menu/boot-entries-edit
create mode 100644 defaultenv-2/menu/menu/boot-entries-remove
create mode 100644 defaultenv-2/menu/menu/boot-menu-add-entry
create mode 100644 defaultenv-2/menu/menu/boot-menu-new-boot-entry
create mode 100644 defaultenv-2/menu/menu/init-entries-collect
create mode 100644 defaultenv-2/menu/menu/init-entries-edit
create mode 100644 defaultenv-2/menu/menu/init-menu-add-entry
create mode 100644 defaultenv-2/menu/menu/mainmenu
create mode 100644 fs/nfs.c
create mode 100644 include/globalvar.h
create mode 100644 include/qsort.h
delete mode 100644 lib/lzo/modules.builtin
create mode 100644 lib/qsort.c
delete mode 100644 lib/zlib_inflate/modules.builtin
create mode 100644 scripts/s5p_cksum.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-07-02 9:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120702092314.GJ2698@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox