* [PATCH 1/2] input: Add i.MX matrix keypad driver
2012-07-16 11:40 [PATCH 0/2] imx: add matrix keypad (kpp) input driver Christian Kapeller
@ 2012-07-16 11:40 ` Christian Kapeller
2012-07-16 11:40 ` [PATCH 2/2] input: add i.MX51 platform code for " Christian Kapeller
2012-07-17 18:46 ` [PATCH 0/2] imx: add matrix keypad (kpp) input driver Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Christian Kapeller @ 2012-07-16 11:40 UTC (permalink / raw)
To: barebox
create mode 100644 drivers/input/imx_keypad.c
create mode 100644 include/matrix_keypad.h
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index b488553..a5aec03 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -16,4 +16,17 @@ config KEYBOARD_GPIO
setup logic must also provide a platform device,
with configuration data saying which GPIOs are used.
+config KEYBOARD_IMX_KEYPAD
+ bool "IMX Keypad"
+ depends on ARCH_IMX
+ select POLLER
+ help
+ This driver implements support for buttons connected
+ to the IMX keypad matrix.
+
+ Say Y here if your device has buttons connected
+ to the IMX keypad matrix. Your board-specific
+ setup logic must also provide a 'matrix_keymap_data' structure,
+ defining the used keys.
+
endmenu
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 7784d52..3d105cc 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_IMX_KEYPAD) += imx_keypad.o
diff --git a/drivers/input/imx_keypad.c b/drivers/input/imx_keypad.c
new file mode 100644
index 0000000..bd9c6dc
--- /dev/null
+++ b/drivers/input/imx_keypad.c
@@ -0,0 +1,463 @@
+/*
+ * Driver for the IMX keypad port.
+ * Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2012 Christian Kapeller <christian.kapeller@cmotion.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ To use the imx keypad driver, you have to define the keys in your platform
+ code.
+
+ 1. Configure the imx keypad row & column pads used by your board
+ 2. Define the keys you want to use:
+
+ #define BTN_1 0x101
+ #define BTN_2 0x102
+ #define BTN_3 0x103
+
+ static uint32_t keypad_codes[] = {
+ // specify your keymap with KEY(row, col, keycode)
+ KEY(0, 1, BTN_1),
+ KEY(1, 0, BTN_2),
+ KEY(1, 1, BTN_3),
+ };
+
+ static struct matrix_keymap_data keypad_data = {
+ .keymap = keypad_codes,
+ .keymap_size = ARRAY_SIZE(keypad_codes),
+ };
+
+ 3. Add the keypad to your platform in your devices init callback:
+
+ imx51_add_kpp(&keypad_data);
+
+ 4. Compile , flash, and enjoy
+*/
+
+#include <common.h>
+#include <errno.h>
+#include <init.h>
+#include <io.h>
+#include <poller.h>
+#include <kfifo.h>
+#include <malloc.h>
+#include <matrix_keypad.h>
+
+/*
+ * Keypad Controller registers (halfword)
+ */
+#define KPCR 0x00 /* Keypad Control Register */
+
+#define KPSR 0x02 /* Keypad Status Register */
+#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
+#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
+#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
+#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/
+#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */
+#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */
+#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */
+
+#define KDDR 0x04 /* Keypad Data Direction Register */
+#define KPDR 0x06 /* Keypad Data Register */
+
+#define MAX_MATRIX_KEY_ROWS 8
+#define MAX_MATRIX_KEY_COLS 8
+#define MATRIX_ROW_SHIFT 3
+
+#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct imx_keypad {
+ struct clk *clk;
+ struct device_d *dev;
+ struct console_device cdev;
+ void __iomem *mmio_base;
+
+ /* optional */
+ int fifo_size;
+
+ struct kfifo *recv_fifo;
+ struct poller_struct poller;
+
+ /*
+ * The matrix is stable only if no changes are detected after
+ * IMX_KEYPAD_SCANS_FOR_STABILITY scans
+ */
+#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
+ int stable_count;
+
+ /* Masks for enabled rows/cols */
+ unsigned short rows_en_mask;
+ unsigned short cols_en_mask;
+
+ unsigned short keycodes[MAX_MATRIX_KEY_NUM];
+
+ /*
+ * Matrix states:
+ * -stable: achieved after a complete debounce process.
+ * -unstable: used in the debouncing process.
+ */
+ unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS];
+ unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS];
+};
+
+static inline struct imx_keypad *
+poller_to_imx_kp_pdata(struct poller_struct *poller)
+{
+ return container_of(poller, struct imx_keypad, poller);
+}
+
+static inline struct imx_keypad *
+cdev_to_imx_kp_pdata(struct console_device *cdev)
+{
+ return container_of(cdev, struct imx_keypad, cdev);
+}
+
+static int imx_keypad_tstc(struct console_device *cdev)
+{
+ struct imx_keypad *kp = cdev_to_imx_kp_pdata(cdev);
+
+ return (kfifo_len(kp->recv_fifo) == 0) ? 0 : 1;
+}
+
+static int imx_keypad_getc(struct console_device *cdev)
+{
+ int code = 0;
+ struct imx_keypad *kp = cdev_to_imx_kp_pdata(cdev);
+
+ kfifo_get(kp->recv_fifo, (u_char*)&code, sizeof(int));
+ return code;
+}
+
+/* Scan the matrix and return the new state in *matrix_volatile_state. */
+static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
+ unsigned short *matrix_volatile_state)
+{
+ int col;
+ unsigned short reg_val;
+
+ for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+ if ((keypad->cols_en_mask & (1 << col)) == 0)
+ continue;
+ /*
+ * Discharge keypad capacitance:
+ * 2. write 1s on column data.
+ * 3. configure columns as totem-pole to discharge capacitance.
+ * 4. configure columns as open-drain.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val |= 0xff00;
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ udelay(2);
+
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val |= (keypad->cols_en_mask & 0xff) << 8;
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ /*
+ * 5. Write a single column to 0, others to 1.
+ * 6. Sample row inputs and save data.
+ * 7. Repeat steps 2 - 6 for remaining columns.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= ~(1 << (8 + col));
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ /*
+ * Delay added to avoid propagating the 0 from column to row
+ * when scanning.
+ */
+ udelay(5);
+
+ /*
+ * 1s in matrix_volatile_state[col] means key pressures
+ * throw data from non enabled rows.
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
+ }
+
+ /*
+ * Return in standby mode:
+ * 9. write 0s to columns
+ */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= 0x00ff;
+ writew(reg_val, keypad->mmio_base + KPDR);
+}
+
+/*
+ * Compare the new matrix state (volatile) with the stable one stored in
+ * keypad->matrix_stable_state and fire events if changes are detected.
+ */
+static void imx_keypad_fire_events(struct imx_keypad *keypad,
+ unsigned short *matrix_volatile_state)
+{
+ int row, col;
+
+ for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+ unsigned short bits_changed;
+ int code;
+
+ if ((keypad->cols_en_mask & (1 << col)) == 0)
+ continue; /* Column is not enabled */
+
+ bits_changed = keypad->matrix_stable_state[col] ^
+ matrix_volatile_state[col];
+
+ if (bits_changed == 0)
+ continue; /* Column does not contain changes */
+
+ for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+ if ((keypad->rows_en_mask & (1 << row)) == 0)
+ continue; /* Row is not enabled */
+ if ((bits_changed & (1 << row)) == 0)
+ continue; /* Row does not contain changes */
+
+ code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+
+ kfifo_put(keypad->recv_fifo, (u_char*)(&keypad->keycodes[code]), sizeof(int));
+
+ pr_debug("Event code: %d, val: %d",
+ keypad->keycodes[code],
+ matrix_volatile_state[col] & (1 << row));
+ }
+ }
+}
+
+/*
+ * imx_keypad_check_for_events is the timer handler.
+ */
+static void imx_keypad_check_for_events(struct poller_struct *poller)
+{
+ struct imx_keypad *keypad = (struct imx_keypad *) poller_to_imx_kp_pdata(poller);
+ unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
+ unsigned short reg_val;
+ bool state_changed, is_zero_matrix;
+ int i;
+
+ memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
+
+ imx_keypad_scan_matrix(keypad, matrix_volatile_state);
+
+ state_changed = false;
+ for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+ if ((keypad->cols_en_mask & (1 << i)) == 0)
+ continue;
+
+ if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
+ state_changed = true;
+ break;
+ }
+ }
+
+ /*
+ * If the matrix state is changed from the previous scan
+ * (Re)Begin the debouncing process, saving the new state in
+ * keypad->matrix_unstable_state.
+ * else
+ * Increase the count of number of scans with a stable state.
+ */
+ if (state_changed) {
+ memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
+ sizeof(matrix_volatile_state));
+ keypad->stable_count = 0;
+ } else
+ keypad->stable_count++;
+
+ /*
+ * If the matrix is not as stable as we want reschedule scan
+ * in the near future.
+ */
+ if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
+ return;
+ }
+
+ /*
+ * If the matrix state is stable, fire the events and save the new
+ * stable state. Note, if the matrix is kept stable for longer
+ * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
+ * events have already been generated.
+ */
+ if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
+ imx_keypad_fire_events(keypad, matrix_volatile_state);
+
+ memcpy(keypad->matrix_stable_state, matrix_volatile_state,
+ sizeof(matrix_volatile_state));
+ }
+
+ is_zero_matrix = true;
+ for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+ if (matrix_volatile_state[i] != 0) {
+ is_zero_matrix = false;
+ break;
+ }
+ }
+
+
+ if (is_zero_matrix) {
+ /*
+ * All keys have been released. Enable only the KDI
+ * interrupt for future key presses (clear the KDI
+ * status bit and its sync chain before that).
+ */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KDIE;
+ reg_val &= ~KBD_STAT_KRIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+ } else {
+ /*
+ * Some keys are still pressed. Schedule a rescan in
+ * attempt to detect multiple key presses and enable
+ * the KRI interrupt to react quickly to key release
+ * event.
+ */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KRIE;
+ reg_val &= ~KBD_STAT_KDIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+ }
+}
+
+static void imx_keypad_config(struct imx_keypad *keypad)
+{
+ unsigned short reg_val;
+
+ /*
+ * Include enabled rows in interrupt generation (KPCR[7:0])
+ * Configure keypad columns as open-drain (KPCR[15:8])
+ */
+ reg_val = readw(keypad->mmio_base + KPCR);
+ reg_val |= keypad->rows_en_mask & 0xff; /* rows */
+ reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */
+ writew(reg_val, keypad->mmio_base + KPCR);
+
+ /* Write 0's to KPDR[15:8] (Colums) */
+ reg_val = readw(keypad->mmio_base + KPDR);
+ reg_val &= 0x00ff;
+ writew(reg_val, keypad->mmio_base + KPDR);
+
+ /* Configure columns as output, rows as input (KDDR[15:0]) */
+ writew(0xff00, keypad->mmio_base + KDDR);
+
+ /*
+ * Clear Key Depress and Key Release status bit.
+ * Clear both synchronizer chain.
+ */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
+ KBD_STAT_KDSC | KBD_STAT_KRSS;
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ /* Enable KDI and disable KRI (avoid false release events). */
+ reg_val |= KBD_STAT_KDIE;
+ reg_val &= ~KBD_STAT_KRIE;
+ writew(reg_val, keypad->mmio_base + KPSR);
+}
+
+static void imx_keypad_inhibit(struct imx_keypad *keypad)
+{
+ unsigned short reg_val;
+
+ /* Inhibit KDI and KRI interrupts. */
+ reg_val = readw(keypad->mmio_base + KPSR);
+ reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+ writew(reg_val, keypad->mmio_base + KPSR);
+
+ /* Colums as open drain and disable all rows */
+ writew(0xff00, keypad->mmio_base + KPCR);
+}
+
+static int __init imx_keypad_probe(struct device_d *dev)
+{
+ struct imx_keypad *keypad;
+ const struct matrix_keymap_data *keymap_data = dev->platform_data;
+ struct console_device *cdev;
+ int error, i;
+
+ keypad = xzalloc(sizeof(struct imx_keypad));
+ if (!keypad) {
+ pr_err("not enough memory for driver data\n");
+ error = -ENOMEM;
+ }
+
+ if (!keymap_data) {
+ pr_err("no keymap defined\n");
+ return -ENODEV;
+ }
+
+ keypad->dev = dev;
+ keypad->mmio_base = dev_request_mem_region(dev, 0);
+
+ if(!keypad->fifo_size)
+ keypad->fifo_size = 50;
+
+ keypad->recv_fifo = kfifo_alloc(keypad->fifo_size);
+
+ /* Search for rows and cols enabled */
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
+ keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
+ }
+
+ if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
+ keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+ pr_err("invalid key data (too many rows or colums)\n");
+ error = -EINVAL;
+ //goto failed_clock_put;
+ }
+ pr_debug("enabled rows mask: %x\n", keypad->rows_en_mask);
+ pr_debug("enabled cols mask: %x\n", keypad->cols_en_mask);
+
+ matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
+ keypad->keycodes);
+
+ imx_keypad_config(keypad);
+
+ /* Ensure that the keypad will stay dormant until opened */
+ imx_keypad_inhibit(keypad);
+
+ keypad->poller.func = imx_keypad_check_for_events;
+
+ cdev = &keypad->cdev;
+ dev->type_data = cdev;
+ cdev->dev = dev;
+ cdev->tstc = imx_keypad_tstc;
+ cdev->getc = imx_keypad_getc;
+ cdev->f_caps = CONSOLE_STDIN;
+ cdev->f_active = CONSOLE_STDIN;
+
+ console_register(&keypad->cdev);
+
+ return poller_register(&keypad->poller);
+
+}
+
+static struct driver_d imx_keypad_driver = {
+ .name = "imx-kpp",
+ .probe = imx_keypad_probe,
+};
+
+static int imx_keypad_init(void)
+{
+ register_driver(&imx_keypad_driver);
+ return 0;
+}
+device_initcall(imx_keypad_init);
diff --git a/include/matrix_keypad.h b/include/matrix_keypad.h
new file mode 100644
index 0000000..60de428
--- /dev/null
+++ b/include/matrix_keypad.h
@@ -0,0 +1,59 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#define MATRIX_MAX_ROWS 32
+#define MATRIX_MAX_COLS 32
+
+#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+ (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+ ((val) & 0xffff))
+
+#define KEY_ROW(k) (((k) >> 24) & 0xff)
+#define KEY_COL(k) (((k) >> 16) & 0xff)
+#define KEY_VAL(k) ((k) & 0xffff)
+
+#define MATRIX_SCAN_CODE(row, col, row_shift) (((row) << (row_shift)) + (col))
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ * representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+ const uint32_t *keymap;
+ unsigned int keymap_size;
+};
+
+/**
+ * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
+ * @keymap_data: keymap supplied by the platform code
+ * @row_shift: number of bits to shift row value by to advance to the next
+ * line in the keymap
+ * @keymap: expanded version of keymap that is suitable for use by
+ * matrix keyboad driver
+ * This function converts platform keymap (encoded with KEY() macro) into
+ * an array of keycodes that is suitable for using in a standard matrix
+ * keyboard driver that uses row and col as indices.
+ */
+static inline void
+matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
+ unsigned int row_shift,
+ unsigned short *keymap)
+{
+ int i;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
+
+ keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+ }
+}
+
+#endif /* _MATRIX_KEYPAD_H */
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/2] input: add i.MX51 platform code for matrix keypad driver
2012-07-16 11:40 [PATCH 0/2] imx: add matrix keypad (kpp) input driver Christian Kapeller
2012-07-16 11:40 ` [PATCH 1/2] input: Add i.MX matrix keypad driver Christian Kapeller
@ 2012-07-16 11:40 ` Christian Kapeller
2012-07-17 18:46 ` [PATCH 0/2] imx: add matrix keypad (kpp) input driver Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Christian Kapeller @ 2012-07-16 11:40 UTC (permalink / raw)
To: barebox
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 6cd50f3..8120f56 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -52,3 +52,8 @@ struct device_d *imx_add_esdhc(void *base, int id, struct esdhc_platform_data *p
{
return imx_add_device("imx-esdhc", id, base, 0x1000, pdata);
}
+
+struct device_d *imx_add_kpp(void *base, struct matrix_keymap_data *pdata)
+{
+ return imx_add_device("imx-kpp", -1, base, 0x1000, pdata);
+}
diff --git a/arch/arm/mach-imx/include/mach/devices-imx51.h b/arch/arm/mach-imx/include/mach/devices-imx51.h
index dbf5862..3d7ff72 100644
--- a/arch/arm/mach-imx/include/mach/devices-imx51.h
+++ b/arch/arm/mach-imx/include/mach/devices-imx51.h
@@ -89,3 +89,7 @@ static inline struct device_d *imx51_add_nand(struct imx_nand_platform_data *pda
return dev;
}
+static inline struct device_d *imx51_add_kpp(struct matrix_keymap_data *pdata)
+{
+ return imx_add_kpp((void *)MX51_KPP_BASE_ADDR, pdata);
+}
diff --git a/arch/arm/mach-imx/include/mach/devices.h b/arch/arm/mach-imx/include/mach/devices.h
index f0f730a..da91646 100644
--- a/arch/arm/mach-imx/include/mach/devices.h
+++ b/arch/arm/mach-imx/include/mach/devices.h
@@ -1,5 +1,6 @@
#include <fec.h>
+#include <matrix_keypad.h>
#include <i2c/i2c.h>
#include <mach/spi.h>
#include <mach/imx-nand.h>
@@ -16,4 +17,5 @@ struct device_d *imx_add_fb(void *base, struct imx_fb_platform_data *pdata);
struct device_d *imx_add_ipufb(void *base, struct imx_ipu_fb_platform_data *pdata);
struct device_d *imx_add_mmc(void *base, int id, void *pdata);
struct device_d *imx_add_esdhc(void *base, int id, struct esdhc_platform_data *pdata);
+struct device_d *imx_add_kpp(void *base, struct matrix_keymap_data *pdata);
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread