From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin
Date: Mon, 23 Jul 2012 08:24:40 +0200 [thread overview]
Message-ID: <20120723062440.GT30009@pengutronix.de> (raw)
In-Reply-To: <1342985496-18182-1-git-send-email-plagnioj@jcrosoft.com>
Hi Jean-Christophe,
On Sun, Jul 22, 2012 at 09:31:36PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Keep the previous target untouched.
> This will allow to do not brake the modules support.
This breaks images which use barebox.bin as an input for their SoC
specific image, like MLO (Omap xload), barebox.netx, barebox.s5p
Sascha
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> This patch apply over my previous patch series that add gzip support
>
> Best Regards,
> J.
> Makefile | 49 ++++++++++++++++++++++++++-----------------------
> piggy.gzip.S | 2 +-
> piggy.lzo.S | 2 +-
> 3 files changed, 28 insertions(+), 25 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 1003786..16a81d3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -300,6 +300,7 @@ CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
> AFLAGS := -D__ASSEMBLY__
>
> LDFLAGS_barebox := -Map barebox.map
> +LDFLAGS_zbarebox := -Map zbarebox.map
>
> # Read KERNELRELEASE from include/config/kernel.release (if it exists)
> KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
> @@ -441,7 +442,10 @@ endif # $(dot-config)
> # command line.
> # This allow a user to issue only 'make' to build a kernel
> # Defaults barebox but it is usually overridden in the arch makefile
> -all: barebox.bin
> +
> +zbarebox.bin-$(CONFIG_IMAGE_COMPRESSION) := zbarebox.bin
> +
> +all: barebox.bin $(zbarebox.bin-y)
>
> include $(srctree)/arch/$(ARCH)/Makefile
>
> @@ -672,11 +676,13 @@ quiet_cmd_objcopy = OBJCOPY $@
> cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
>
> OBJCOPYFLAGS_barebox.bin = -O binary
> -OBJCOPYFLAGS_barebox-uncompressed.bin = -O binary
> +OBJCOPYFLAGS_zbarebox.bin = -O binary
>
> barebox.bin: barebox FORCE
> $(call if_changed,objcopy)
> +ifndef CONFIG_IMAGE_COMPRESSION
> $(call cmd,check_file_size,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE))
> +endif
>
> ifdef CONFIG_X86
> barebox.S: barebox
> @@ -706,46 +712,43 @@ quiet_cmd_disasm = DISASM $@
>
> barebox.S: barebox FORCE
> $(call if_changed,disasm)
> -barebox-uncompressed.S: barebox-uncompressed FORCE
> +zbarebox.S: zbarebox FORCE
> $(call if_changed,disasm)
> endif
>
> # barebox image
> -barebox-uncompressed: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o)
> +barebox: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o) FORCE
> $(call barebox-modpost)
> $(call if_changed_rule,barebox__)
> $(Q)rm -f .old_version
>
> -barebox-uncompressed.bin: barebox-uncompressed
> - $(call if_changed,objcopy)
> -
> suffix_$(CONFIG_IMAGE_COMPRESSION_GZIP) = gzip
> suffix_$(CONFIG_IMAGE_COMPRESSION_LZO) = lzo
>
> -barebox-uncompressed.bin.gzip: barebox-uncompressed.bin
> +barebox.bin.gzip: barebox.bin
> @echo " GZIP " $@
> - $(Q)gzip -n -9 -c barebox-uncompressed.bin > $@
> + $(Q)gzip -n -9 -c barebox.bin > $@
>
> -barebox-uncompressed.bin.lzo: barebox-uncompressed.bin
> +barebox.bin.lzo: barebox.bin
> @echo " LZO " $@
> - $(Q)lzop -f -9 -o $@ barebox-uncompressed.bin
> + $(Q)lzop -f -9 -o $@ barebox.bin
>
> -piggy.$(suffix_y).o: barebox-uncompressed.bin.$(suffix_y) $(src)/piggy.$(suffix_y).S
> +piggy.$(suffix_y).o: barebox.bin.$(suffix_y) FORCE
> @echo " CC " $@
> $(Q)$(CC) $(CFLAGS) $(CPPFLAGS) -c $(src)/piggy.$(suffix_y).S -o $@
>
> -ifdef CONFIG_IMAGE_COMPRESSION
> -barebox: piggy.$(suffix_y).o $(barebox-comp)
> +zbarebox: piggy.$(suffix_y).o $(barebox-comp) FORCE
> @echo " LD " $@ $(barebox-comp)
> - $(Q)$(LD) $(LDFLAGS) $(LDFLAGS_barebox) -o $@ \
> + $(Q)$(LD) $(LDFLAGS) $(LDFLAGS_zbarebox) -o $@ \
> -T $(barebox-compressed-lds) \
> --start-group $(barebox-comp) $(comp-arch-y) piggy.$(suffix_y).o --end-group
> -else
> -barebox: $(barebox-lds) $(barebox-head) $(barebox-common) $(kallsyms.o) FORCE
> - $(call barebox-modpost)
> - $(call if_changed_rule,barebox__)
> - $(Q)rm -f .old_version
> -endif
> +
> +zbarebox.bin: zbarebox
> + $(call if_changed,objcopy)
> + $(call cmd,check_file_size,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE))
> +
> +zbarebox.srec: zbarebox
> + $(OBJCOPY) -O srec $< $@
>
> barebox.srec: barebox
> $(OBJCOPY) -O srec $< $@
> @@ -1040,11 +1043,11 @@ endif # CONFIG_MODULES
> # Directories & files removed with 'make clean'
> CLEAN_DIRS += $(MODVERDIR)
> CLEAN_FILES += barebox System.map include/generated/barebox_default_env.h \
> - .tmp_version .tmp_barebox* barebox.bin barebox.map barebox.S \
> + .tmp_version .tmp_barebox* barebox.* \
> .tmp_kallsyms* barebox_default_env* barebox.ldr \
> scripts/bareboxenv-target \
> Doxyfile.version barebox.srec barebox.s5p \
> - barebox-uncompressed barebox-uncompressed.bin*
> + zbarebox*
>
> # Directories & files removed with 'make mrproper'
> MRPROPER_DIRS += include/config include2 usr/include
> diff --git a/piggy.gzip.S b/piggy.gzip.S
> index 2ca7d78..ffd85cb 100644
> --- a/piggy.gzip.S
> +++ b/piggy.gzip.S
> @@ -1,6 +1,6 @@
> .section .piggydata,#alloc
> .globl input_data
> input_data:
> - .incbin "barebox-uncompressed.bin.gzip"
> + .incbin "barebox.bin.gzip"
> .globl input_data_end
> input_data_end:
> diff --git a/piggy.lzo.S b/piggy.lzo.S
> index 6cc618d..ae5b2db 100644
> --- a/piggy.lzo.S
> +++ b/piggy.lzo.S
> @@ -1,6 +1,6 @@
> .section .piggydata,#alloc
> .globl input_data
> input_data:
> - .incbin "barebox-uncompressed.bin.lzo"
> + .incbin "barebox.bin.lzo"
> .globl input_data_end
> input_data_end:
> --
> 1.7.10
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-07-23 6:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-22 19:31 Jean-Christophe PLAGNIOL-VILLARD
2012-07-23 6:24 ` Sascha Hauer [this message]
2012-07-23 6:26 ` Sascha Hauer
2012-07-23 6:30 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-23 6:28 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120723062440.GT30009@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox