From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1StOsw-00009a-N1 for barebox@lists.infradead.org; Mon, 23 Jul 2012 20:05:51 +0000 Date: Mon, 23 Jul 2012 22:05:26 +0200 From: Sascha Hauer Message-ID: <20120723200526.GB30009@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Booting kernel from FAT partition on beagle board To: Bernhard Walle Cc: barebox@lists.infradead.org On Sun, Jul 22, 2012 at 05:29:44PM +0200, Bernhard Walle wrote: > Hi, > > Passing control to ARM Linux uImage handler > > Starting kernel at 0x80008000... > commandline: console=ttyO2,115200 vram=12M > omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi > root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait earlyprintk=ttyO2,115200 earlyprintk does not take options. Have you enabled earlyprintk support in your config? At least you should something then. > arch_number: 1546 > ------------------------------------------------------------ > > The same kernel boots fine using u-boot. I'm using Barebox 2012.07.0 and > u-boot 2012.07-rc1. > > Did I do something wrong? Or is that just a bug? What you tried should work, I can't see something obviously wrong. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox