mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Jan Weitzel <j.weitzel@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/3] OMAP4460: ram init changes
Date: Fri, 27 Jul 2012 16:13:46 +0200	[thread overview]
Message-ID: <20120727141346.GV22657@game.jcrosoft.org> (raw)
In-Reply-To: <1343396404-10288-3-git-send-email-j.weitzel@phytec.de>

On 15:40 Fri 27 Jul     , Jan Weitzel wrote:
> configure  Memory Adapter for 4460
> 
> Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> ---
>  arch/arm/mach-omap/include/mach/omap4-silicon.h |    4 ++++
>  arch/arm/mach-omap/omap4_generic.c              |   21 +++++++++++++++++++--
>  2 files changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
> index d5517c5..4082bac 100644
> --- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
> +++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
> @@ -101,6 +101,10 @@
>  #define DMM_LISA_MAP_SYS_SIZE_MASK	(7 << 20)
>  #define DMM_LISA_MAP_SYS_SIZE_SHIFT	20
>  #define DMM_LISA_MAP_SYS_ADDR_MASK	(0xFF << 24)
> +
> +/* Memory Adapter (4460 onwards) */
> +#define OMAP44XX_MA_BASE		0x482AF000
> +
>  /*
>   * Hardware Register Details
>   */
> diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c
> index 07aa2b4..a368759 100644
> --- a/arch/arm/mach-omap/omap4_generic.c
> +++ b/arch/arm/mach-omap/omap4_generic.c
> @@ -29,6 +29,10 @@
>  #define OMAP4460_CONTROL_ID_CODE_ES1_0  0x0B94E02F
>  #define OMAP4460_CONTROL_ID_CODE_ES1_1  0x2B94E02F
>  
> +/* EMIF_L3_CONFIG register value */
> +#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0		0x0A0000FF
> +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0	0x0A300000
> +
>  void __noreturn reset_cpu(unsigned long addr)
>  {
>  	writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
> @@ -270,8 +274,7 @@ static void reset_phy(unsigned int base)
>  void omap4_ddr_init(const struct ddr_regs *ddr_regs,
>  		const struct dpll_param *core)
>  {
> -	unsigned int rev;
> -	rev = omap4_revision();
> +	unsigned int rev = omap4_revision();
>  
>  	if (rev == OMAP4430_ES2_0) {
>  		writel(0x9e9e9e9e, 0x4A100638);
> @@ -294,6 +297,13 @@ void omap4_ddr_init(const struct ddr_regs *ddr_regs,
>  	*(volatile int*)(OMAP44XX_DMM_BASE + DMM_LISA_MAP_2) = 0x00000000;
>  	*(volatile int*)(OMAP44XX_DMM_BASE + DMM_LISA_MAP_3) = 0xFF020100;
>  
> +	if (rev >= OMAP4460_ES1_0) {
> +		writel(0x80640300, OMAP44XX_MA_BASE + DMM_LISA_MAP_0);
> +
> +		*(volatile int*)(OMAP44XX_MA_BASE + DMM_LISA_MAP_2) = 0x00000000;
> +		*(volatile int*)(OMAP44XX_MA_BASE + DMM_LISA_MAP_3) = 0xFF020100;
??

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-07-27 14:14 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-27 13:40 [PATCH 0/3] omap: 4460 support Jan Weitzel
2012-07-27 13:40 ` [PATCH 1/3] Add support for OMAP4460 TPS62361 Jan Weitzel
2012-08-03 16:57   ` Sascha Hauer
2012-08-13  6:07     ` [PATCH 3/3] OMAP4460: clock init Jan Weitzel
2012-08-13 19:08       ` Sascha Hauer
2012-07-27 13:40 ` [PATCH 2/3] OMAP4460: ram init changes Jan Weitzel
2012-07-27 14:13   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-07-27 15:12     ` Sascha Hauer
2012-08-02 10:55       ` [PATCH] OMAP4: use writel and readl Jan Weitzel
2012-08-13 12:32         ` [PATCH v2] " Jan Weitzel
2012-08-13 18:42           ` Sascha Hauer
2012-07-27 13:40 ` [PATCH 3/3] OMAP4460: clock init Jan Weitzel
2012-07-27 14:18   ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-02 10:36     ` Jan Weitzel
2012-08-14  7:04 [PATCH 0/3 v2] omap: 4460 support Jan Weitzel
2012-08-14  7:04 ` [PATCH 2/3] OMAP4460: ram init changes Jan Weitzel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120727141346.GV22657@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=j.weitzel@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox