* Barebox hangs after boot
@ 2012-07-29 17:03 Alexey Galakhov
2012-07-29 17:22 ` Juergen Beisert
0 siblings, 1 reply; 4+ messages in thread
From: Alexey Galakhov @ 2012-07-29 17:03 UTC (permalink / raw)
To: barebox
Hello,
While debugging S5PV210 code I ran into the following problem. Barebox
starts, the barebox command line appears on the console but does not
react to keypresses. I found no obvious dependence on the config
settings.
What may be the cause of this problem and how do I debug it?
Regards,
Alex
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Barebox hangs after boot
2012-07-29 17:03 Barebox hangs after boot Alexey Galakhov
@ 2012-07-29 17:22 ` Juergen Beisert
2012-07-29 17:26 ` Alexey Galakhov
0 siblings, 1 reply; 4+ messages in thread
From: Juergen Beisert @ 2012-07-29 17:22 UTC (permalink / raw)
To: barebox; +Cc: Alexey Galakhov
Hi Alexey,
Alexey Galakhov wrote:
> While debugging S5PV210 code I ran into the following problem. Barebox
> starts, the barebox command line appears on the console but does not
> react to keypresses. I found no obvious dependence on the config
> settings.
>
> What may be the cause of this problem and how do I debug it?
Broken timer?
Regards,
Juergen
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Barebox hangs after boot
2012-07-29 17:22 ` Juergen Beisert
@ 2012-07-29 17:26 ` Alexey Galakhov
2012-07-29 17:46 ` Alexey Galakhov
0 siblings, 1 reply; 4+ messages in thread
From: Alexey Galakhov @ 2012-07-29 17:26 UTC (permalink / raw)
To: Juergen Beisert; +Cc: barebox
2012/7/29 Juergen Beisert <jbe@pengutronix.de>:
> Hi Alexey,
>
> Alexey Galakhov wrote:
>> While debugging S5PV210 code I ran into the following problem. Barebox
>> starts, the barebox command line appears on the console but does not
>> react to keypresses. I found no obvious dependence on the config
>> settings.
>>
>> What may be the cause of this problem and how do I debug it?
>
> Broken timer?
>
> Regards,
> Juergen
>
> --
> Pengutronix e.K. | Juergen Beisert |
> Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
Probably not:
running /env/bin/init...
Hit any key to stop autoboot: 3... 2... 1... 0 (keypresses have no effect)
Now I'm checking wires, it may be just broken RX-TX connection. But unlikely.
Regards,
Alex
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-07-29 17:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-29 17:03 Barebox hangs after boot Alexey Galakhov
2012-07-29 17:22 ` Juergen Beisert
2012-07-29 17:26 ` Alexey Galakhov
2012-07-29 17:46 ` Alexey Galakhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox