From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2012.08.0
Date: Thu, 2 Aug 2012 10:53:26 +0200 [thread overview]
Message-ID: <20120802085326.GJ30009@pengutronix.de> (raw)
Hi All,
We have an August release. Most notable improvemt is 64bit support for
files and devices, so SD cards are no longer limited to 4GB. Some
subtile fixes for allocating DMA memory on ARM also make it worth
updating. There's more, so as usual, here is the complete list of
changes.
Sascha
----------------------------------------------------------------
Alexander Shiyan (8):
Move /dev/zero to separate unit
Added "/dev/full" and "/dev/null" devices
i.MX51: Synchronize iomux header file from kernel
ARM: initial ConnectCore® i.MX51 board support
I.MX clko: Using strtol function instead strtoul for getting argument for clko source
i.MX clko: Added support for more than one CLKO outputs
i.MX51: Added support for "clko" command
Setup UART-pads via iomux interface
Antony Pavlov (6):
clocksource: move the NSEC_PER_SEC constant to common header
MIPS: XBurst: fix the JZ4755's clocksource input frequency value
MIPS: XBurst: use clocks_calc_mult_shift() for JZ4755's clocksource
add 'poweroff' command
rzx50: add poweroff support
filetype: add forgotten mips barebox filetype_str
Jan Luebbe (4):
defaultenv/bin/init: skip autoboot if $autoboot_timeout is unset
fs/devfs.c: disallow write and erase if a partition is read-only
mmuinfo: add a command do display the result of virtual to physical translation
mtd: fix 'write: Invalid argument' while writing to nand-bb devices
Jean-Christophe PLAGNIOL-VILLARD (4):
vsprintf: fix EXPORT_SYMBOL typo on simple_strtoull
complete: add missing EXPORT_SYMBOL for {command, device, empty, command}_var_complete
version: add missing EXPORT_SYMBOL for version_string
command: add missing EXPORT_SYMBOL for find_cmd
Johannes Stezenbach (6):
drivers/net: add designware driver
miidev: fix auto negotiation
miidev: actually probe the PHY
miidev: add support for 1000Mbit
miidev: consistent md and mw on phy regs
eth: eth MAC addresses are six bytes
Juergen Beisert (8):
Add a simple watchdog framework
ARM/MXS: add a watchdog driver for i.MX28
ARM/MXS: add new way to reset the whole SoC
ARM/MXS: the GPIO bitkeeper enable logic is inverse to the pullup enable logic
ARM/Samsung: be able to include the nand header multiple times
ARM/Samsung: unify device registration for the S3C24XX SoCs
NAND/Samsung: remove a leftover from architeture clean ups
ARM/MXS: pull-up and bitkeeper must be handled differently
Marc Kleine-Budde (4):
ARM mmu: don't use CONFIG_MMU to disable mmu code, there are static inline versions
blackfin, mips, openrisc, ppc, sandbox, x86: add generic dma_alloc, dma_free inlines
nios: add dma_alloc, asm/dma.h
ARM mmu: add dma_alloc
Roberto Nibali (2):
Remove superfluous SYSCTL_RSTA
Deal properly with scripts/bareboxenv-target
Sascha Hauer (95):
menu: factor out a function to print an entry
net: Use dev_name directly
dos partitions: enable disk size guessing only for bios disks
Change byte order detection mechanism to kernel style
blackfin: add __ashrdi3
openrisc: link to libgcc
mips: Add missing ffs and fls include
nios2: Add missing ffs and fls include
x86: Add missing ffs and fls include
blackfin: Add missing fls include
ARM defconfigs: Use TLSF malloc on defconfigs getting too big
ARM at91sam9m10g45ek: Enable lzo decompression
include/linux/time.h: remove dead code
defaultenv-2 ifup: Always overwrite eth0.serverip
defaultenv-2: mount tftp server specified in $eth0.serverip
defaultenv-2: remove global.tftp.path
defaultenv-2 ifup: create network up state file for dhcp
USB gadget fsl: request cacheline aligned buffer
USB gadget: Fix dma memory allocations
USB core: allocate setup_packet using dma_alloc
USB core: device descriptor using dma_alloc
USB core: Allocate tmpbuf using dma_alloc
USB ehci: Use dma coherent buffers for qh/qtd
USB ehci: put fields of struct qTD directly into struct QH
USB storage: use dma_alloc where appropriate
block: use dma_alloc to allocate buffers
partition: Use dma_alloc for allocating buffers
USB ehci: rework cache handling
Makefile: echo size check error to stderr
ARM i.MX51 babbage: add mci1
remove dead rarpboot command
ARM i.MX23 usb: move to SoC specific functions
ARM i.MX28 usb: Add USBPHY support
ARM mxs: Add mxs_reset_block function
mtd: fix arguments to bad block ioctls
use loff_t for file offsets
introduce strtoull_suffix function
make parse_area_spec arguments loff_t
make memory display 64bit capable
make st_size in struct stat 64 bit
make cdev 64bit capable
memory commands: Make 64bit capable
partitions: Make 64bit capable
Add basename command
Add dirname command
fs: Fix file create bug when parent is not a directory
complete: fix parameter complete with multiple '.'
menu: use read_key
menu: store repaint state in variable
menu: implement KEY_HOME/KEY_END
MMC i.MX esdhc: Fix sparse warnings
tlsf: Use NULL instead of 0 for returning NULL pointers
qsort: declare strcmp_compar publically
Do not use iomem space for dev_get_mem_region
define __user empty
ARM i.MX speed: sparse fixes
USB ohci: Fix sparse warnings
net smc911x: Use __iomem for register base
ARM i.MX clocksource: put registers in iomem space
USB gadget fsl: Put registers into iomem space
fs FAT: fix warning: Using plain integer as NULL pointer
of: Fix usage of 0 as NULL pointer
resource: store 'end' instead of 'size' in struct resource
Merge branch 'for-next/64bit'
Merge branch 'for-next/basename-dirname'
Merge branch 'for-next/defenv-2'
Merge branch 'for-next/defconfig'
Merge branch 'for-next/dma-cache-align'
Merge branch 'for-next/misc'
Merge branch 'for-next/sparse'
Merge branch 'for-next/watchdog'
Merge branch 'for-next/net-designware'
Merge branch 'for-next/size-decrease'
Merge branch 'for-next/imx-clko'
Merge branch 'for-next/ethernet'
Merge branch 'for-next/fs'
Merge branch 'for-next/mx28-ocotp'
Merge branch 'for-next/mxs-reset'
Merge branch 'for-next/mxs-usb'
Merge branch 'for-next/mmuinfo'
Merge branch 'for-next/menu'
Merge branch 'for-next/devnull'
Merge branch 'for-next/mips-clocksource'
Merge branch 'for-next/poweroff'
Merge branch 'for-next/digi-connect-core'
Merge branch 'for-next/resource-size'
Merge branch 'for-next/mxs-nand'
ARM mmu: flush page tables in arm_mmu_remap_sdram()
fs: fix standard zero, full devices
ARM i.MX51 babbage: Use correct select for new environment
mem md: bail out without arguments
ARM: Enable unaligned accesses on armv6 and later
mtd: fix bad block ioctls
mem md: make md -s /dev/something work again
Release v2012.08.0
Steffen Trumtrar (2):
common: fix typo cammand_var_complete
commands: add msleep command
Svetlana Khafizova (1):
Makefile: update barebox version if CONFIG_KALLSYMS is not set
Teresa Gámez (1):
scripts/checkpatch.pl: reset rpt_cleaners warnings
Uwe Kleine-König (2):
commands/crc: assert newline after output with big offsets
i2c: fix printf format specifier
Wjatscheslaw Stoljarski (Slawa) (1):
ARM i.MX53: notify clocksource about changing clock
Wolfram Sang (12):
arm: mxs: get MAC from OCOTP for MX28EVK
arm: mxs: make get_hclk result useable for upcoming set_hclk
arm: mxs: add imx_set_hclk
dma: add mxs-apbh-dma driver
mtd nand: add mxs-nand driver
ARM mxs: add bcb command to create 'boot control block' for NAND boot
arm: mxs: add POWER_BASE for MX28, too
arm: mxs: refactor access to power domain
arm: mxs: add functions to get/set vddio
arm: mxs: refactor timeout routine for ocotp
arm: mxs: use consistent naming for #defines for ocotp
arm: mxs: add write support for ocotp
.gitignore | 1 +
Makefile | 8 +-
arch/arm/Kconfig | 10 +-
arch/arm/Makefile | 1 +
arch/arm/boards/a9m2410/a9m2410.c | 7 +-
arch/arm/boards/a9m2440/a9m2440.c | 7 +-
arch/arm/boards/ccxmx51/Makefile | 2 +
arch/arm/boards/ccxmx51/ccxmx51.c | 489 ++++++++
arch/arm/boards/ccxmx51/ccxmx51.dox | 7 +
arch/arm/boards/ccxmx51/ccxmx51.h | 35 +
arch/arm/boards/ccxmx51/ccxmx51js.c | 90 ++
arch/arm/boards/ccxmx51/config.h | 24 +
arch/arm/boards/ccxmx51/env/config | 37 +
arch/arm/boards/ccxmx51/flash_header.c | 84 ++
arch/arm/boards/chumby_falconwing/falconwing.c | 2 +-
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 11 +-
arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 30 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 13 +-
arch/arm/boards/mini2440/mini2440.c | 16 +-
arch/arm/boards/nhk8815/setup.c | 6 +-
arch/arm/boards/pcm038/pcm970.c | 2 +-
arch/arm/configs/at91sam9m10g45ek_defconfig | 2 +-
arch/arm/configs/ccmx51_defconfig | 55 +
arch/arm/configs/eukrea_cpuimx25_defconfig | 1 +
arch/arm/configs/eukrea_cpuimx35_defconfig | 1 +
arch/arm/configs/eukrea_cpuimx51_defconfig | 1 +
arch/arm/configs/usb_a9260_defconfig | 1 +
arch/arm/configs/usb_a9263_128mib_defconfig | 3 +-
arch/arm/configs/usb_a9263_defconfig | 2 +-
arch/arm/configs/usb_a9g20_128mib_defconfig | 3 +-
arch/arm/configs/usb_a9g20_defconfig | 1 +
arch/arm/cpu/Makefile | 1 +
arch/arm/cpu/mmu.c | 9 +-
arch/arm/cpu/mmuinfo.c | 111 ++
arch/arm/cpu/start.c | 12 +-
arch/arm/include/asm/dma.h | 8 +
arch/arm/include/asm/mmu.h | 13 +-
arch/arm/lib/bootm.c | 8 +-
arch/arm/mach-at91/at91sam9260_devices.c | 4 +-
arch/arm/mach-at91/at91sam9263_devices.c | 4 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 4 +-
arch/arm/mach-at91/at91sam9x5_devices.c | 4 +-
arch/arm/mach-imx/Kconfig | 23 +-
arch/arm/mach-imx/clko.c | 24 +-
arch/arm/mach-imx/clocksource.c | 12 +-
arch/arm/mach-imx/iim.c | 8 +-
arch/arm/mach-imx/imx53.c | 2 +
arch/arm/mach-imx/include/mach/clock.h | 6 +-
arch/arm/mach-imx/include/mach/devices-imx51.h | 4 +-
arch/arm/mach-imx/include/mach/devices-imx53.h | 4 +-
arch/arm/mach-imx/include/mach/iomux-mx51.h | 48 +-
arch/arm/mach-imx/speed-imx21.c | 11 +-
arch/arm/mach-imx/speed-imx25.c | 11 +-
arch/arm/mach-imx/speed-imx27.c | 12 +-
arch/arm/mach-imx/speed-imx35.c | 13 +-
arch/arm/mach-imx/speed-imx51.c | 75 +-
arch/arm/mach-imx/speed-imx53.c | 3 +-
arch/arm/mach-mxs/Kconfig | 20 +
arch/arm/mach-mxs/Makefile | 7 +-
arch/arm/mach-mxs/bcb.c | 399 +++++++
arch/arm/mach-mxs/common.c | 33 +
arch/arm/mach-mxs/include/mach/clock-imx23.h | 2 +
arch/arm/mach-mxs/include/mach/clock-imx28.h | 2 +
arch/arm/mach-mxs/include/mach/dma.h | 145 +++
arch/arm/mach-mxs/include/mach/imx23-regs.h | 3 +
arch/arm/mach-mxs/include/mach/imx28-regs.h | 9 +-
arch/arm/mach-mxs/include/mach/iomux-imx23.h | 5 +-
arch/arm/mach-mxs/include/mach/iomux-imx28.h | 5 +-
arch/arm/mach-mxs/include/mach/mxs.h | 6 +
arch/arm/mach-mxs/include/mach/power.h | 8 +
arch/arm/mach-mxs/include/mach/usb.h | 5 +-
arch/arm/mach-mxs/iomux-imx.c | 2 +-
arch/arm/mach-mxs/ocotp.c | 154 ++-
arch/arm/mach-mxs/power.c | 84 ++
arch/arm/mach-mxs/reset-imx.c | 61 -
arch/arm/mach-mxs/soc-imx23.c | 37 +
arch/arm/mach-mxs/soc-imx28.c | 37 +
arch/arm/mach-mxs/speed-imx23.c | 45 +-
arch/arm/mach-mxs/speed-imx28.c | 45 +-
arch/arm/mach-mxs/{usb.c => usb-imx23.c} | 35 +-
arch/arm/mach-mxs/usb-imx28.c | 101 ++
.../mach-samsung/include/mach/devices-s3c24xx.h | 55 +
arch/arm/mach-samsung/include/mach/s3c24xx-nand.h | 5 +
arch/blackfin/include/asm/bitops.h | 3 +
arch/blackfin/include/asm/dma.h | 13 +
arch/blackfin/lib/Makefile | 1 +
arch/blackfin/lib/ashrdi3.c | 36 +
arch/mips/include/asm/bitops.h | 3 +
arch/mips/include/asm/dma.h | 13 +
arch/mips/mach-xburst/Kconfig | 1 +
arch/mips/mach-xburst/csrc-jz4750.c | 7 +-
arch/mips/mach-xburst/include/mach/jz4750d_regs.h | 31 +
arch/mips/mach-xburst/reset-jz4750.c | 28 +
arch/nios2/boards/generic/generic.c | 6 +-
arch/nios2/include/asm/bitops.h | 5 +
arch/nios2/include/asm/dma-mapping.h | 10 +
arch/nios2/include/asm/dma.h | 8 +
arch/openrisc/Makefile | 4 +
arch/openrisc/include/asm/dma.h | 13 +
arch/ppc/include/asm/dma.h | 13 +
arch/ppc/mach-mpc85xx/include/mach/clocks.h | 2 -
arch/sandbox/board/hostfile.c | 4 +-
arch/sandbox/include/asm/dma.h | 13 +
arch/x86/include/asm/bitops.h | 7 +-
arch/x86/include/asm/dma.h | 13 +
commands/Kconfig | 46 +
commands/Makefile | 6 +
commands/basename.c | 47 +
commands/bootm.c | 6 +-
commands/crc.c | 11 +-
commands/digest.c | 4 +-
commands/dirname.c | 47 +
commands/flash.c | 4 +-
commands/go.c | 2 +-
commands/iomem.c | 3 +-
commands/ls.c | 2 +-
commands/mem.c | 81 +-
commands/msleep.c | 40 +
commands/nand.c | 3 +-
commands/nandtest.c | 4 +-
commands/net.c | 29 -
commands/poweroff.c | 37 +
commands/sleep.c | 2 +-
commands/stddev.c | 106 ++
commands/wd.c | 68 ++
common/block.c | 13 +-
common/command.c | 1 +
common/complete.c | 8 +-
common/filetype.c | 1 +
common/memory.c | 4 +-
common/menu.c | 113 +-
common/oftree.c | 2 +-
common/partitions.c | 36 +-
common/resource.c | 30 +-
common/tlsf.c | 12 +-
common/uimage.c | 6 +-
common/version.c | 2 +-
defaultenv-2/base/bin/ifup | 12 +-
defaultenv-2/base/bin/init | 2 -
defaultenv-2/base/boot/initrd | 5 +-
defaultenv-2/base/boot/net | 6 +-
defaultenv-2/base/init/automount | 11 +-
defaultenv-2/base/init/general | 3 -
defaultenv/bin/init | 2 +-
drivers/Kconfig | 3 +-
drivers/Makefile | 2 +
drivers/ata/disk_ata_drive.c | 2 +-
drivers/base/driver.c | 12 +-
drivers/base/resource.c | 14 +-
drivers/dma/Kconfig | 8 +
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 598 ++++++++++
drivers/eeprom/at25.c | 8 +-
drivers/i2c/i2c.c | 4 +-
drivers/mci/imx-esdhc.c | 20 +-
drivers/mci/imx-esdhc.h | 1 -
drivers/mfd/lp3972.c | 2 +-
drivers/mfd/mc13xxx.c | 4 +-
drivers/mfd/mc34704.c | 4 +-
drivers/mfd/mc34708.c | 6 +-
drivers/mfd/mc9sdz60.c | 4 +-
drivers/mfd/twl-core.c | 4 +-
drivers/mtd/core.c | 20 +-
drivers/mtd/mtdoob.c | 3 +-
drivers/mtd/mtdraw.c | 9 +-
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand-bb.c | 38 +-
drivers/mtd/nand/nand_mxs.c | 1258 ++++++++++++++++++++
drivers/mtd/ubi/cdev.c | 8 +-
drivers/mtd/ubi/ubi-barebox.h | 1 -
drivers/net/Kconfig | 16 +
drivers/net/Makefile | 1 +
drivers/net/designware.c | 436 +++++++
drivers/net/designware.h | 230 ++++
drivers/net/miidev.c | 76 +-
drivers/net/smc911x.c | 2 +-
drivers/nor/cfi_flash.c | 18 +-
drivers/nor/m25p80.c | 16 +-
drivers/usb/core/usb.c | 100 +-
drivers/usb/gadget/composite.c | 5 +-
drivers/usb/gadget/dfu.c | 5 +-
drivers/usb/gadget/fsl_udc.c | 7 +-
drivers/usb/host/ehci-hcd.c | 108 +-
drivers/usb/host/ehci.h | 10 +-
drivers/usb/host/ohci-at91.c | 2 +-
drivers/usb/host/ohci-hcd.c | 40 +-
drivers/usb/host/ohci.h | 2 +-
drivers/usb/storage/transport.c | 11 +-
drivers/video/fb.c | 4 +-
drivers/watchdog/Kconfig | 15 +
drivers/watchdog/Makefile | 2 +
drivers/watchdog/im28wd.c | 124 ++
drivers/watchdog/wd_core.c | 57 +
fs/cramfs/cramfs.c | 2 +-
fs/devfs-core.c | 17 +-
fs/devfs.c | 21 +-
fs/fat/fat.c | 6 +-
fs/fat/ff.c | 10 +-
fs/fs.c | 50 +-
fs/nfs.c | 2 +-
fs/ramfs.c | 2 +-
fs/tftp.c | 2 +-
include/clock.h | 2 +
include/common.h | 24 +-
include/complete.h | 2 +-
include/cramfs/cramfs_fs.h | 8 +-
include/dma.h | 30 +
include/driver.h | 31 +-
include/envfs.h | 22 +-
include/fs.h | 13 +-
include/linux/byteorder/generic.h | 7 -
include/linux/compiler.h | 2 +-
include/linux/ioport.h | 8 +-
include/linux/stat.h | 2 +-
include/linux/time.h | 152 +--
include/menu.h | 3 -
include/miidev.h | 4 +
include/net.h | 8 +-
include/net/designware.h | 9 +
include/partition.h | 2 +-
include/qsort.h | 2 +
include/usb/usb.h | 9 +-
include/watchdog.h | 24 +
lib/misc.c | 24 +-
lib/vsprintf.c | 1 +
net/eth.c | 6 +-
net/net.c | 4 +-
scripts/checkpatch.pl | 1 +
229 files changed, 6517 insertions(+), 1069 deletions(-)
create mode 100644 arch/arm/boards/ccxmx51/Makefile
create mode 100644 arch/arm/boards/ccxmx51/ccxmx51.c
create mode 100644 arch/arm/boards/ccxmx51/ccxmx51.dox
create mode 100644 arch/arm/boards/ccxmx51/ccxmx51.h
create mode 100644 arch/arm/boards/ccxmx51/ccxmx51js.c
create mode 100644 arch/arm/boards/ccxmx51/config.h
create mode 100644 arch/arm/boards/ccxmx51/env/config
create mode 100644 arch/arm/boards/ccxmx51/flash_header.c
create mode 100644 arch/arm/configs/ccmx51_defconfig
create mode 100644 arch/arm/cpu/mmuinfo.c
create mode 100644 arch/arm/include/asm/dma.h
create mode 100644 arch/arm/mach-mxs/bcb.c
create mode 100644 arch/arm/mach-mxs/common.c
create mode 100644 arch/arm/mach-mxs/include/mach/dma.h
create mode 100644 arch/arm/mach-mxs/include/mach/mxs.h
create mode 100644 arch/arm/mach-mxs/include/mach/power.h
create mode 100644 arch/arm/mach-mxs/power.c
delete mode 100644 arch/arm/mach-mxs/reset-imx.c
create mode 100644 arch/arm/mach-mxs/soc-imx23.c
create mode 100644 arch/arm/mach-mxs/soc-imx28.c
rename arch/arm/mach-mxs/{usb.c => usb-imx23.c} (66%)
create mode 100644 arch/arm/mach-mxs/usb-imx28.c
create mode 100644 arch/arm/mach-samsung/include/mach/devices-s3c24xx.h
create mode 100644 arch/blackfin/include/asm/dma.h
create mode 100644 arch/blackfin/lib/ashrdi3.c
create mode 100644 arch/mips/include/asm/dma.h
create mode 100644 arch/nios2/include/asm/dma.h
create mode 100644 arch/openrisc/include/asm/dma.h
create mode 100644 arch/ppc/include/asm/dma.h
create mode 100644 arch/sandbox/include/asm/dma.h
create mode 100644 arch/x86/include/asm/dma.h
create mode 100644 commands/basename.c
create mode 100644 commands/dirname.c
create mode 100644 commands/msleep.c
create mode 100644 commands/poweroff.c
create mode 100644 commands/stddev.c
create mode 100644 commands/wd.c
create mode 100644 drivers/dma/Kconfig
create mode 100644 drivers/dma/Makefile
create mode 100644 drivers/dma/apbh_dma.c
create mode 100644 drivers/mtd/nand/nand_mxs.c
create mode 100644 drivers/net/designware.c
create mode 100644 drivers/net/designware.h
create mode 100644 drivers/watchdog/Kconfig
create mode 100644 drivers/watchdog/Makefile
create mode 100644 drivers/watchdog/im28wd.c
create mode 100644 drivers/watchdog/wd_core.c
create mode 100644 include/dma.h
create mode 100644 include/net/designware.h
create mode 100644 include/watchdog.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-08-02 8:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120802085326.GJ30009@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox