From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Jan Luebbe <jlu@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 03/13] common: split out meminfo output and make it optional
Date: Mon, 20 Aug 2012 16:42:25 +0200 [thread overview]
Message-ID: <20120820144225.GX6271@game.jcrosoft.org> (raw)
In-Reply-To: <1345472428-17417-4-git-send-email-jlu@pengutronix.de>
On 16:20 Mon 20 Aug , Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
> common/Kconfig | 4 ++++
> common/Makefile | 1 +
> common/meminfo.c | 21 +++++++++++++++++++++
> common/startup.c | 19 -------------------
> include/common.h | 10 ++++++++--
> 5 files changed, 34 insertions(+), 21 deletions(-)
> create mode 100644 common/meminfo.c
>
> diff --git a/common/Kconfig b/common/Kconfig
> index b776031..7d33c2e 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -88,6 +88,10 @@ config BANNER
> bool "display banner"
> default y
>
> +config MEMINFO
> + bool "display memory info"
> + default y
> +
> config ENVIRONMENT_VARIABLES
> bool "environment variables support"
>
> diff --git a/common/Makefile b/common/Makefile
> index a1926d3..69ff5df 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_MALLOC_TLSF) += tlsf.o
> obj-$(CONFIG_MALLOC_DUMMY) += dummy_malloc.o
> obj-y += clock.o
> obj-$(CONFIG_BANNER) += version.o
> +obj-$(CONFIG_MEMINFO) += meminfo.o
> obj-$(CONFIG_COMMAND_SUPPORT) += command.o
> obj-$(CONFIG_CONSOLE_FULL) += console.o
> obj-$(CONFIG_CONSOLE_SIMPLE) += console_simple.o
> diff --git a/common/meminfo.c b/common/meminfo.c
> new file mode 100644
> index 0000000..30b5bef
> --- /dev/null
> +++ b/common/meminfo.c
> @@ -0,0 +1,21 @@
> +#include <common.h>
> +#include <memory.h>
> +#include <asm-generic/memory_layout.h>
> +
> +void display_meminfo(void)
> +{
> + ulong mstart = mem_malloc_start();
> + ulong mend = mem_malloc_end();
> + ulong msize = mend - mstart + 1;
> +
> + debug("barebox code: 0x%p -> 0x%p\n", _stext, _etext);
> + debug("bss segment: 0x%p -> 0x%p\n", __bss_start, __bss_stop);
> + printf("Malloc space: 0x%08lx -> 0x%08lx (size %s)\n",
> + mstart, mend, size_human_readable(msize));
> +#ifdef CONFIG_ARM
> + printf("Stack space : 0x%08x -> 0x%08x (size %s)\n",
> + STACK_BASE, STACK_BASE + STACK_SIZE,
> + size_human_readable(STACK_SIZE));
> +#endif
> +}
so move it as a late_initcall
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-20 14:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 14:20 Jan Luebbe
2012-08-20 14:20 ` [PATCH 01/13] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-08-20 14:20 ` [PATCH 02/13] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-08-20 14:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:51 ` Jan Luebbe
2012-08-21 13:04 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 03/13] common: split out meminfo output and make it optional Jan Luebbe
2012-08-20 14:42 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-08-21 6:55 ` Jan Luebbe
2012-08-20 14:20 ` [PATCH 04/13] omap: add SPI as a boot mode for xload Jan Luebbe
2012-08-20 14:20 ` [PATCH 05/13] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-08-20 14:20 ` [PATCH 06/13] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:59 ` Jan Luebbe
2012-08-21 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 07/13] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:08 ` Jan Luebbe
2012-08-21 12:15 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 08/13] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-08-20 14:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:16 ` Jan Luebbe
2012-08-21 12:14 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 09/13] m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-08-20 14:20 ` [PATCH 10/13] defaultenv: support NAND and NOR kernel partitions at the same time Jan Luebbe
2012-08-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 11/13] defaultenv: use /env/oftree if it exists Jan Luebbe
2012-08-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 12/13] defaultenv: support kernel and oftree on a filesystem Jan Luebbe
2012-08-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 13/13] omap3_clock: avoid initializing cores not present on TI AM35xx Jan Luebbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120820144225.GX6271@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=jlu@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox