From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 5/5] defaultenv-2: add boot sequence
Date: Tue, 28 Aug 2012 10:26:45 +0200 [thread overview]
Message-ID: <20120828082645.GB26594@pengutronix.de> (raw)
In-Reply-To: <1345784113-29643-5-git-send-email-plagnioj@jcrosoft.com>
On Fri, Aug 24, 2012 at 06:55:13AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Boot will boot run sequentially the script in /env/boot.d
>
> if not global.boot.defaul or global.boot.defaul == seq
> start the boot sequence
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> defaultenv-2/base/bin/boot | 52 ++++++++++++++++++++++++++++++++++++----
> defaultenv-2/base/init/general | 2 +-
> 2 files changed, 48 insertions(+), 6 deletions(-)
>
> diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> index 103eb87..ade555d 100644
> --- a/defaultenv-2/base/bin/boot
> +++ b/defaultenv-2/base/bin/boot
> @@ -2,20 +2,39 @@
>
> verbose=
> dryrun=
> +sequence=
>
> usage="
> $0 [OPTIONS] [source]\n
> -v verbose\n
> -d dryrun\n
> -l list boot sources\n
> + -s start boot sequence in /env/boot.d/\n
I think there should not be a dedicated option for this. Instead, it
should by default start the boot sequence. global.boot.default could
then be dropped.
Sascha
> -h help"
>
> +if [ ${global.allow_color} = "true" ]; then
> + . /env/data/ansi-colors
> + ECHO=-e
> +fi
> +
> for i in /env/boot/*; do
> basename $i s
> sources="$sources$s "
> done
>
> -while getopt "vdhl" opt; do
> +if [ -d /env/boot.d ]; then
> + sources="$sources\nboot sequence:"
> + for i in /env/boot.d/*; do
> + readlink -f $i s
> + basename $s link
> + basename $i s
> + sources="$sources\n $s -> $link"
> + done
> +else
> + sources="$sources\nboot sequence:\nnone"
> +fi
> +
> +while getopt "vdhls" opt; do
> if [ ${opt} = v ]; then
> if [ -n "$verbose" ]; then
> verbose="-v -v"
> @@ -23,7 +42,9 @@ while getopt "vdhl" opt; do
> verbose="-v"
> fi
> elif [ ${opt} = d ]; then
> - dryrun=1
> + dryrun="-d"
> + elif [ ${opt} = s ]; then
> + sequence=1
> elif [ ${opt} = l ]; then
> echo -e "boot sources:\n$sources"
> exit 0
> @@ -43,12 +64,33 @@ else
> scr="$1"
> fi
>
> +if [ -n "$sequence" -o "x$src" = "xseq" ]; then
> + if [ ! -d /env/boot.d ]; then
> + echo ${ECHO} "${GREEN}boot sequence ${RED}none${NC}"
> + exit 1
> + fi
> + echo ${ECHO} "${GREEN}Start boot sequence${NC}"
> + for i in /env/boot.d/*; do
> + readlink -f $i s
> + basename $s link
> + basename $i s
> + msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> + echo ${ECHO} "${msg}"
> + boot $dryrun $s
> + echo ${ECHO} "${msg} ${RED}failled${NC}"
> + ret=$?
> + done
> + echo ${ECHO} "${GREEN}boot sequence ${RED}failled${NC}"
> + exit $ret
> +fi
> +
> if [ -n "$scr" ]; then
> - if [ ! -f /env/boot/$scr ]; then
> - echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> + if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
> + echo -e "/env/boot/$scr or /env/boot.d/$scr does not exist.Valid choices:\n$sources"
> exit
> fi
> - /env/boot/$scr
> + [ -f /env/boot.d/$scr ] && /env/boot.d/$scr
> + [ -f /env/boot/$scr ] && /env/boot/$scr
> fi
>
> if [ -n "$dryrun" ]; then
> diff --git a/defaultenv-2/base/init/general b/defaultenv-2/base/init/general
> index 98a92d1..2c0bd74 100644
> --- a/defaultenv-2/base/init/general
> +++ b/defaultenv-2/base/init/general
> @@ -11,5 +11,5 @@ global.user=sha
> # timeout in seconds before the default boot entry is started
> global.autoboot_timeout=3
>
> -# default boot entry (one of /env/boot/*)
> +# default boot entry (one of /env/boot/*) or seq to start the sequence
> global.boot.default=net
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-28 8:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-24 4:52 [PATCH 0/5] " Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 4:55 ` [PATCH 1/5] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 4:55 ` [PATCH 2/5] globalvar: add support to set a value to of all globalvars beginning with 'match' Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 9:08 ` Roberto Nibali
2012-08-24 18:51 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 4:55 ` [PATCH 3/5] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globarvar Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 4:55 ` [PATCH 4/5] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globarvar Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 4:55 ` [PATCH 5/5] defaultenv-2: add boot sequence Jean-Christophe PLAGNIOL-VILLARD
2012-08-24 7:36 ` Roberto Nibali
2012-08-28 8:26 ` Sascha Hauer [this message]
2012-09-01 12:49 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120828082645.GB26594@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox