From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jan Luebbe <jlu@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl
Date: Tue, 4 Sep 2012 10:20:24 +0200 [thread overview]
Message-ID: <20120904082024.GP26594@pengutronix.de> (raw)
In-Reply-To: <1346672765-16162-3-git-send-email-jlu@pengutronix.de>
On Mon, Sep 03, 2012 at 01:45:57PM +0200, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> ---
> drivers/nor/m25p80.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/nor/m25p80.c b/drivers/nor/m25p80.c
> index 61f2195..1722e0a 100644
> --- a/drivers/nor/m25p80.c
> +++ b/drivers/nor/m25p80.c
> @@ -20,6 +20,7 @@
> #include <common.h>
> #include <init.h>
> #include <driver.h>
> +#include <ioctl.h>
> #include <spi/spi.h>
> #include <spi/flash.h>
> #include <xfuncs.h>
> @@ -690,9 +691,34 @@ static const struct spi_device_id *jedec_probe(struct spi_device *spi)
> return NULL;
> }
>
> +static int m25p80_ioctl(struct cdev *cdev, int request, void *buf)
> +{
> + struct m25p *flash = cdev->priv;
> + struct flash_info *info = flash->info;
> + struct mtd_info_user *user = buf;
> +
> + switch (request) {
> + case MEMGETINFO:
> + memset(user, 0, sizeof(*user));
> + user->type = MTD_NORFLASH;
> + user->flags = MTD_CAP_NORFLASH;
> + user->size = flash->size;
> + user->erasesize = info->sector_size;
> + user->writesize = 1;
> + user->oobsize = 0;
> + /* The below fields are obsolete */
> + user->ecctype = -1;
> + user->eccsize = 0;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> static struct file_operations m25p80_ops = {
> .read = m25p80_read,
> .write = m25p80_write,
> + .ioctl = m25p80_ioctl,
Rather than doing this you should simply fill in cdev->mtd. See how the
cfi flash driver does this. Then it will also work for partitions on a
m25p80.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-04 8:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-03 11:45 Prepare support for TI AM35xx Jan Luebbe
2012-09-03 11:45 ` [PATCH 01/10] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-09-03 11:45 ` [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl Jan Luebbe
2012-09-04 8:20 ` Sascha Hauer [this message]
2012-09-03 11:45 ` [PATCH 03/10] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-09-03 16:22 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-03 11:45 ` [PATCH 04/10] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-09-04 8:27 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 05/10] common: split out meminfo output and make it optional Jan Luebbe
2012-09-03 11:46 ` [PATCH 06/10] omap: add SPI as a boot mode for xload Jan Luebbe
2012-09-03 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 7:41 ` Jan Weitzel
2012-09-03 11:46 ` [PATCH 07/10] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-09-03 11:46 ` [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-09-03 16:27 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 8:42 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-09-04 8:48 ` Sascha Hauer
2012-09-05 9:28 ` Jan Lübbe
2012-09-03 11:46 ` [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-09-03 16:32 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 8:58 ` Sascha Hauer
2012-09-05 9:20 ` Jan Lübbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120904082024.GP26594@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jlu@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox