From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 00/11 v2] defaultenv-2: add bootp support
Date: Fri, 7 Sep 2012 14:07:13 +0200 [thread overview]
Message-ID: <20120907120713.GQ20330@game.jcrosoft.org> (raw)
HI,
v2:
- add ifdown
- dhcp: switch to global var support
- add dhcp-barebox support to defaultenv-2
this patch serie depends on the previous defaultenv-2-boot-sequence
please pull
The following changes since commit 5b9b40e603d03afe760f9249c2b38e99c3cade92:
defaultenv-2: add boot sequence (2012-09-07 17:46:37 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git tags/defaultenv-2-bootp
for you to fetch changes up to 30dcb11c5f70bf83e050f6f713ee9c47c9cc5c7b:
defaultenv-2: add symbolic link support to boot/nfs (2012-09-07 20:03:00 +0800)
----------------------------------------------------------------
defaultenv-2: add bootp support
dhcp: add global var support
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
dhcp: add retries limit support
boot: add bootp support to net (tftp)
boot: add nfs bootp support
Where the kernel and oftree as retrieved via nfs
support also the symlink file so we will mount the correct path to get the
file as nfs does not follow the link as it's done on tftp
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (11):
defaultenv: enable glovalvar support
defaultenv: switch hostname to global.hostname
dhcp: switch to global var support
dhcp: add copy_only_if_valid support
dhcp: add retries limit support
defaultenv-2: eth0 add default global.dhcp.vendor_id
defaultenv-2/ip: add dhcp-barebox support
defaultenv-2: add ifdown support
defaultenv-2: boot/net add bootp support
defaultenv-2: add net boot support with kernel and oftree via nfs
defaultenv-2: add symbolic link support to boot/nfs
arch/arm/boards/at91rm9200ek/env/config | 2 +-
arch/arm/boards/at91sam9260ek/env/config | 4 ++--
arch/arm/boards/at91sam9261ek/env/config | 4 ++--
arch/arm/boards/at91sam9263ek/env/config | 2 +-
arch/arm/boards/at91sam9m10g45ek/env/config | 2 +-
arch/arm/boards/at91sam9x5ek/env/config | 2 +-
arch/arm/boards/eukrea_cpuimx25/env/config | 12 +++++------
arch/arm/boards/eukrea_cpuimx35/env/config | 12 +++++------
arch/arm/boards/eukrea_cpuimx51/env/config | 12 +++++------
arch/arm/boards/freescale-mx28-evk/env/config | 10 ++++-----
arch/arm/boards/freescale-mx35-3-stack/env/config | 12 +++++------
arch/arm/boards/freescale-mx53-loco/env/config | 14 ++++++-------
arch/arm/boards/freescale-mx53-smd/env/config | 12 +++++------
arch/arm/boards/friendlyarm-mini2440/env/config | 12 +++++------
arch/arm/boards/guf-cupid/env/config | 12 +++++------
arch/arm/boards/guf-neso/env/config | 12 +++++------
arch/arm/boards/karo-tx25/env/config | 12 +++++------
arch/arm/boards/karo-tx28/env/config | 12 +++++------
arch/arm/boards/panda/env/config | 10 ++++-----
arch/arm/boards/pcm027/env/config | 12 +++++------
arch/arm/boards/pcm037/env/config | 12 +++++------
arch/arm/boards/pcm043/env/config | 12 +++++------
arch/arm/boards/pcm049/env/config | 12 +++++------
arch/arm/boards/phycard-a-l1/env/config | 16 +++++++-------
arch/arm/boards/phycard-a-xl2/env/config | 12 +++++------
arch/arm/boards/phycard-i.MX27/env/config | 12 +++++------
arch/arm/boards/qil-a9260/env/config | 2 +-
arch/arm/boards/scb9328/env/config | 12 +++++------
arch/arm/boards/tny-a926x/env/config | 6 +++---
arch/arm/boards/usb-a926x/env/config | 6 +++---
common/Kconfig | 1 +
defaultenv-2/base/bin/bootargs-ip | 2 ++
defaultenv-2/base/bin/ifdown | 16 ++++++++++++++
defaultenv-2/base/bin/ifup | 2 +-
defaultenv-2/base/boot/net | 35 ++++++++++++++++++++++++++++++-
defaultenv-2/base/boot/nfs | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
defaultenv-2/base/network/eth0 | 1 +
defaultenv/bin/boot | 12 +++++------
defaultenv/bin/init | 2 ++
defaultenv/config | 18 ++++++++--------
net/dhcp.c | 163 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
41 files changed, 486 insertions(+), 183 deletions(-)
create mode 100644 defaultenv-2/base/bin/ifdown
create mode 100644 defaultenv-2/base/boot/nfs
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-09-07 12:06 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-07 12:07 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-07 12:13 ` [PATCH 01/11] defaultenv: enable glovalvar support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 02/11] defaultenv: switch hostname to global.hostname Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 03/11] dhcp: switch to global var support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 04/11] dhcp: add copy_only_if_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 05/11] dhcp: add retries limit support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 06/11] defaultenv-2: eth0 add default global.dhcp.vendor_id Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 07/11] defaultenv-2/ip: add dhcp-barebox support Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 14:04 ` Sascha Hauer
2012-09-08 14:23 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 08/11] defaultenv-2: add ifdown support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 09/11] defaultenv-2: boot/net add bootp support Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 18:21 ` Sascha Hauer
2012-09-08 5:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 6:17 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 13:47 ` Sascha Hauer
2012-09-08 14:42 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 14:48 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 15:10 ` Sascha Hauer
2012-09-08 17:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 14:51 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 15:27 ` Sascha Hauer
2012-09-08 17:12 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 17:22 ` Sascha Hauer
2012-09-08 17:35 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 18:11 ` Sascha Hauer
2012-09-08 13:56 ` Sascha Hauer
2012-09-08 14:37 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 15:09 ` Sascha Hauer
2012-09-08 17:14 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 18:12 ` Sascha Hauer
2012-09-07 12:13 ` [PATCH 10/11] defaultenv-2: add net boot support with kernel and oftree via nfs Jean-Christophe PLAGNIOL-VILLARD
2012-09-07 12:13 ` [PATCH 11/11] defaultenv-2: add symbolic link support to boot/nfs Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 13:49 ` Sascha Hauer
2012-09-08 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-08 17:09 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120907120713.GQ20330@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox