From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 0/3 v3] net: check error and introduce phylib
Date: Fri, 14 Sep 2012 09:37:55 +0200 [thread overview]
Message-ID: <20120914073755.GD20834@game.jcrosoft.org> (raw)
HI,
v3:
- fix comment
- add phy_driver probe and remove
- renambe phydev.h to phy.h and phylib.c to phy.c as in linux
please pull
The following changes since commit 8b3bf5971afbdf1acc5becabb6f15ba4b2a5559d:
tap: fix missing parent setting on eth_device (2012-09-12 17:26:26 +0200)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git tags/net_phylib
for you to fetch changes up to 4b7293febd1176262e3bfe2a3ecf37c0298675d8:
net: move the eth_dev status detection at driver level (2012-09-14 15:34:03 +0800)
----------------------------------------------------------------
net: check error and introduce phylib
Adapt phylib from linux
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or down fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (3):
net: introduce phylib
net: catch error on eth_send
net: move the eth_dev status detection at driver level
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 2 +-
drivers/net/altera_tse.c | 18 ++---
drivers/net/altera_tse.h | 1 +
drivers/net/at91_ether.c | 26 +++----
drivers/net/cs8900.c | 1 +
drivers/net/designware.c | 40 ++++++-----
drivers/net/dm9k.c | 9 +--
drivers/net/ep93xx.c | 7 +-
drivers/net/fec_imx.c | 45 ++++++------
drivers/net/fec_imx.h | 1 +
drivers/net/fec_mpc5200.c | 9 +--
drivers/net/gianfar.c | 30 ++++----
drivers/net/ks8851_mll.c | 11 ++-
drivers/net/macb.c | 40 +++++++----
drivers/net/miidev.c | 206 ++++---------------------------------------------------
drivers/net/netx_eth.c | 7 +-
drivers/net/phy/Kconfig | 17 +++++
drivers/net/phy/Makefile | 2 +
drivers/net/phy/generic.c | 36 ++++++++++
drivers/net/phy/phy.c | 624 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/smc91111.c | 20 ++----
drivers/net/smc911x.c | 12 ++--
drivers/net/tap.c | 1 +
drivers/net/usb/asix.c | 2 +-
drivers/net/usb/smsc95xx.c | 2 +-
drivers/net/usb/usbnet.c | 11 +--
include/linux/ethtool.h | 114 ++++++++++++++++++++++++++++++
include/linux/mii.h | 421 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------
include/miidev.h | 13 +---
include/phy.h | 146 +++++++++++++++++++++++++++++++++++++++
include/usb/usbnet.h | 1 +
net/eth.c | 4 +-
net/net.c | 18 +++--
34 files changed, 1443 insertions(+), 456 deletions(-)
create mode 100644 drivers/net/phy/Kconfig
create mode 100644 drivers/net/phy/Makefile
create mode 100644 drivers/net/phy/generic.c
create mode 100644 drivers/net/phy/phy.c
create mode 100644 include/linux/ethtool.h
create mode 100644 include/phy.h
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-09-14 7:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 7:37 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-14 7:57 ` [PATCH 1/3] net: " Jean-Christophe PLAGNIOL-VILLARD
2012-09-14 7:57 ` [PATCH 2/3] net: catch error on eth_send Jean-Christophe PLAGNIOL-VILLARD
2012-09-16 9:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-14 7:57 ` [PATCH 3/3] net: move the eth_dev status detection at driver level Jean-Christophe PLAGNIOL-VILLARD
2012-09-16 8:12 ` Sascha Hauer
2012-09-15 12:24 ` [PATCH 1/3] net: introduce phylib Sascha Hauer
2012-09-16 8:11 ` Sascha Hauer
2012-09-16 8:28 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-16 8:34 ` Sascha Hauer
2012-09-16 9:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-16 9:13 ` Sascha Hauer
2012-09-16 9:41 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120914073755.GD20834@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox