mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Carlo Caione <carlo.caione@gmail.com>
Cc: barebox@lists.infradead.org, Carlo Caione <carlo@carlocaione.org>
Subject: Re: [PATCH 1/2] Add bcm2835/Raspberry-Pi support
Date: Wed, 19 Sep 2012 00:06:35 +0200	[thread overview]
Message-ID: <20120918220635.GT25990@game.jcrosoft.org> (raw)
In-Reply-To: <1348000210-21686-1-git-send-email-carlo.caione@gmail.com>

On 22:30 Tue 18 Sep     , Carlo Caione wrote:
> Signed-off-by: Carlo Caione <carlo@carlocaione.org>
> ---
>  arch/arm/Kconfig                              |    6 +
>  arch/arm/Makefile                             |    2 +
>  arch/arm/boards/raspberry-pi/Kconfig          |   10 ++
>  arch/arm/boards/raspberry-pi/Makefile         |    2 +
>  arch/arm/boards/raspberry-pi/config.h         |    4 +
>  arch/arm/boards/raspberry-pi/env/config       |    1 +
>  arch/arm/boards/raspberry-pi/rpi.c            |   58 +++++++
>  arch/arm/cpu/Kconfig                          |    5 +
>  arch/arm/mach-bcm2835/Kconfig                 |   15 ++
>  arch/arm/mach-bcm2835/Makefile                |    4 +
>  arch/arm/mach-bcm2835/clock.c                 |   75 +++++++++
>  arch/arm/mach-bcm2835/core.c                  |  100 ++++++++++++
>  arch/arm/mach-bcm2835/gpio.c                  |  115 ++++++++++++++
>  arch/arm/mach-bcm2835/include/mach/clkdev.h   |    7 +
>  arch/arm/mach-bcm2835/include/mach/clock.h    |   10 ++
>  arch/arm/mach-bcm2835/include/mach/core.h     |   27 ++++
>  arch/arm/mach-bcm2835/include/mach/gpio.h     |   12 ++
>  arch/arm/mach-bcm2835/include/mach/platform.h |  207 +++++++++++++++++++++++++
>  18 files changed, 660 insertions(+)
>  create mode 100644 arch/arm/boards/raspberry-pi/Kconfig
>  create mode 100644 arch/arm/boards/raspberry-pi/Makefile
>  create mode 100644 arch/arm/boards/raspberry-pi/config.h
>  create mode 100644 arch/arm/boards/raspberry-pi/env/config
>  create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
>  create mode 100644 arch/arm/mach-bcm2835/Kconfig
>  create mode 100644 arch/arm/mach-bcm2835/Makefile
>  create mode 100644 arch/arm/mach-bcm2835/clock.c
>  create mode 100644 arch/arm/mach-bcm2835/core.c
>  create mode 100644 arch/arm/mach-bcm2835/gpio.c
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a54ad03..f8eb1b4 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -92,6 +92,11 @@ config ARCH_TEGRA
>  	select CPU_ARM926T
>  	select HAS_DEBUG_LL
>  
> +config ARCH_BCM2835
> +	bool "Broadcom BCM2835 boards"
> +	select GENERIC_GPIO
> +	select CPU_ARM1176
please keep in alphabetic order
> +
>  endchoice
>  
>  source arch/arm/cpu/Kconfig
> @@ -106,6 +111,7 @@ source arch/arm/mach-pxa/Kconfig
>  source arch/arm/mach-samsung/Kconfig
>  source arch/arm/mach-versatile/Kconfig
>  source arch/arm/mach-tegra/Kconfig
> +source arch/arm/mach-bcm2835/Kconfig
>  
>  config ARM_ASM_UNIFIED
>  	bool
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 8e660be..36a1b91 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -62,6 +62,7 @@ machine-$(CONFIG_ARCH_PXA)		:= pxa
>  machine-$(CONFIG_ARCH_SAMSUNG)		:= samsung
>  machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
>  machine-$(CONFIG_ARCH_TEGRA)		:= tegra
> +machine-$(CONFIG_ARCH_BCM2835)		:= bcm2835
please keep in alphabetic order
>  
>  # Board directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
> @@ -141,6 +142,7 @@ board-$(CONFIG_MACH_TOSHIBA_AC100)		:= toshiba-ac100
>  board-$(CONFIG_MACH_CCMX51)			:= ccxmx51
>  board-$(CONFIG_MACH_TINY210)			:= friendlyarm-tiny210
>  board-$(CONFIG_MACH_SABRELITE)			:= freescale-mx6-sabrelite
> +board-$(CONFIG_MACH_RPI)			:= raspberry-pi
please keep in alphabetic order
>  
>  machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
>  
> diff --git a/arch/arm/boards/raspberry-pi/Kconfig b/arch/arm/boards/raspberry-pi/Kconfig
> new file mode 100644
> index 0000000..9d19c98
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/Kconfig
> @@ -0,0 +1,10 @@
> +
> +if MACH_RPI
> +
> +config ARCH_TEXT_BASE
> +	hex
> +	default 0x00008000
> +
> +config BOARDINFO
> +	default "RaspberryPi (BCM2835/ARM1176JZF-S)"
missing if MACH...
> +endif
> diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
> new file mode 100644
> index 0000000..56da6f2
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/Makefile
> @@ -0,0 +1,2 @@
> +
> +obj-$(CONFIG_MACH_RPI) += rpi.o
> diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
> new file mode 100644
> index 0000000..ca15136
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/config.h
> @@ -0,0 +1,4 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
split the patch in 2 arch tehn board
> +
> +#endif	/* __CONFIG_H */
> diff --git a/arch/arm/boards/raspberry-pi/env/config b/arch/arm/boards/raspberry-pi/env/config
> new file mode 100644
> index 0000000..1a24852
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/env/config
please switch to defaultenv-2
> @@ -0,0 +1 @@
> +#!/bin/sh
> diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
> new file mode 100644
> index 0000000..bbbe6ec
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/rpi.c
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (C) 2012 Carlo Caione <carlo@carlocaione.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <environment.h>
> +#include <partition.h>
> +#include <sizes.h>
> +
> +#include <mach/gpio.h>
> +#include <mach/core.h>
> +#include <mach/platform.h>
> +#include <linux/amba/serial.h>
no need the amba include
> +#include <io.h>
> +
> +static int rpi_mem_init(void)
> +{
> +	bcm2835_add_device_sdram(128 * 1024 *1024);
can't you detect it?
> +
> +	return 0;
> +}
> +mem_initcall(rpi_mem_init);
> +
> +static int rpi_console_init(void)
> +{
> +	bcm2835_register_uart();
> +	return 0;
> +}
> +console_initcall(rpi_console_init);
> +
> +static int rpi_devices_init(void)
> +{
> +	armlinux_set_architecture(MACH_TYPE_BCM2708);
> +	armlinux_set_bootparams((void *)(0x00000100));
> +	return 0;
> +}
> +
> +device_initcall(rpi_devices_init);
> +
> diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
> index f55e862..108253b 100644
> --- a/arch/arm/cpu/Kconfig
> +++ b/arch/arm/cpu/Kconfig
> @@ -8,6 +8,11 @@ config CPU_32
>  # which CPUs we support in the kernel image, and the compiler instruction
>  # optimiser behaviour.
>  
> +# ARM1176
> +config CPU_ARM1176
> +	bool
> +	select CPU_V6
seperated patch
> +
>  # ARM920T
>  config CPU_ARM920T
>  	bool
> diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
> new file mode 100644
> index 0000000..ae6d3ae
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/Kconfig
> @@ -0,0 +1,15 @@
> +if ARCH_BCM2835
> +
> +choice
> +	prompt "ARM Board type"
ARM?? IT's broadcom
> +
> +config MACH_RPI
> +	bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
> +	select ARM_AMBA
> +	select CLKDEV_LOOKUP
> +
> +endchoice
> +
> +source arch/arm/boards/raspberry-pi/Kconfig
> +
> +endif
> diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
> new file mode 100644
> index 0000000..6d530d5
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/Makefile
> @@ -0,0 +1,4 @@
> +
> +obj-y += core.o
> +obj-y += clock.o
> +obj-y += gpio.o
> diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
> new file mode 100644
> index 0000000..99900e3
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/clock.c
> @@ -0,0 +1,75 @@
> +/*
> + *  linux/arch/arm/mach-bcm2708/clock.c
this code come from nomadik please keep my copy right
> + *
> + *  Copyright (C) 2010 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <clock.h>
> +#include <debug_ll.h>
> +
> +#include <linux/clkdev.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <io.h>
> +#include <asm/hardware/arm_timer.h>
> +#include <asm/armlinux.h>
> +
> +#include <mach/platform.h>
> +#include <mach/clock.h>
> +
> +int clk_enable(struct clk *clk)
> +{
> +	return 0;
> +}
> +EXPORT_SYMBOL(clk_enable);
> +
> +void clk_disable(struct clk *clk)
> +{
> +}
> +EXPORT_SYMBOL(clk_disable);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +long clk_round_rate(struct clk *clk, unsigned long rate)
> +{
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_round_rate);
> +
> +int clk_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	return -EIO;
> +}
> +EXPORT_SYMBOL(clk_set_rate);
> +
> +int bcm2835_clk_create(struct clk *clk, const char *dev_id)
> +{
> +	struct clk_lookup *clkdev;
> +
> +	clkdev = clkdev_alloc(clk, NULL, dev_id);
> +	if (!clkdev)
> +		return -ENOMEM;
> +	clkdev_add(clkdev);
> +	return 0;
> +}
> diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
> new file mode 100644
> index 0000000..382f8a3
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/core.c
> @@ -0,0 +1,100 @@
> +/*
ditto here
> + * Copyright (C) 2012 Carlo Caione <carlo@carlocaione.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <clock.h>
> +#include <debug_ll.h>
> +
> +#include <linux/clkdev.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <io.h>
> +#include <asm/hardware/arm_timer.h>
> +#include <asm/armlinux.h>
> +
> +#include <mach/platform.h>
> +#include <mach/core.h>
> +#include <mach/clock.h>
> +
> +static struct clk ref24_clk = {
> +	.rate = UART0_CLOCK,	
put the rate here no need macro

and the clokc is 30K so ref24 is a bit off as a name
> +};
> +
> +void bcm2835_add_device_sdram(u32 size)
> +{
> +	arm_add_mem_device("ram0", 0x00000000, size);
> +}
> +
> +static struct clk_lookup clocks_lookups[] = {
> +	CLKDEV_DEV_ID("uart-pl0110", &ref24_clk),
> +};
> +
> +#define STC_FREQ_HZ 1000000
> +
> +static uint64_t stc_read_cycles(void)
> +{
> +	return (uint64_t) readl(ST_BASE + 0x04);
> +}
> +
> +static struct clocksource bcm2835_cs = {
> +	.read = stc_read_cycles,
> +	.mask = CLOCKSOURCE_MASK(32),
> +};
> +
> +static int bcm2835_clocksource_init(void)
> +{
> +	clocks_calc_mult_shift(&bcm2835_cs.mult, &bcm2835_cs.shift, STC_FREQ_HZ, NSEC_PER_SEC, 60);
> +	return init_clock(&bcm2835_cs);
> +}
> +core_initcall(bcm2835_clocksource_init);
> +
> +static int bcm2835_clkdev_init(void)
> +{
> +	clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> +
> +	return 0;
> +}
> +postcore_initcall(bcm2835_clkdev_init);
> +
> +void bcm2835_register_uart(void)
> +{
> +	struct device_d *dev;
> +
> +	dev = add_generic_device("uart-pl011", 0, NULL, UART0_BASE, 4096,
> +			   IORESOURCE_MEM, NULL);
this will not work on next I add the amba bus support check the nomadik code
> +	bcm2835_clk_create(&ref24_clk, dev_name(dev));
no need drop it
> +}
> +
> +#define RESET_TIMEOUT 10
> +
> +void __noreturn reset_cpu (unsigned long addr)
> +{
> +  	uint32_t rstc;
> +   
> +    rstc = readl(PM_RSTC);
> +    rstc &= ~PM_RSTC_WRCFG_SET;
> +    rstc |= PM_RSTC_WRCFG_FULL_RESET;
> +  
> +    writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
> +    writel(PM_PASSWORD | rstc, PM_RSTC);
> +}
> +EXPORT_SYMBOL(reset_cpu);
> diff --git a/arch/arm/mach-bcm2835/gpio.c b/arch/arm/mach-bcm2835/gpio.c
> new file mode 100644
> index 0000000..4fd22e1
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/gpio.c
> @@ -0,0 +1,115 @@
> +/*
> + *  linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
please switch to gpiolib
> + *
> + *  Copyright (C) 2010 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <init.h>
> +#include <io.h>
> +
> +#include <mach/platform.h>
> +#include <mach/gpio.h>
> +
> +#define GPIOFSEL(x)  (0x00+(x)*4)
> +#define GPIOSET(x)   (0x1c+(x)*4)
> +#define GPIOCLR(x)   (0x28+(x)*4)
> +#define GPIOLEV(x)   (0x34+(x)*4)
> +#define GPIOEDS(x)   (0x40+(x)*4)
> +#define GPIOREN(x)   (0x4c+(x)*4)
> +#define GPIOFEN(x)   (0x58+(x)*4)
> +#define GPIOHEN(x)   (0x64+(x)*4)
> +#define GPIOLEN(x)   (0x70+(x)*4)
> +#define GPIOAREN(x)  (0x7c+(x)*4)
> +#define GPIOAFEN(x)  (0x88+(x)*4)
> +#define GPIOUD(x)    (0x94+(x)*4)
> +#define GPIOUDCLK(x) (0x98+(x)*4)
> +
> +enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
> +	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
> +	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
> +	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
> +};
> +
> +struct bcm2835_gpio {
> +	void __iomem *base;
> +};
> +
> +static struct bcm2835_gpio *bcm2835_gpio;
> +
> +static int bcm2835_gpio_init(void)
> +{
> +	bcm2835_gpio = kzalloc(sizeof(struct bcm2835_gpio), GFP_KERNEL);
> +	if (bcm2835_gpio == NULL) {
> +		pr_err("%s: failed to allocate GPIO\n", __func__);
> +		return -ENOMEM;
> +	}
> +	bcm2835_gpio->base = (void __iomem *)GPIO_BASE;
> +	return 0;
> +}
> +postcore_initcall(bcm2835_gpio_init);
> +
> +static int bcm2835_set_function(unsigned gpio, int function)
> +{
> +	unsigned gpiodir;
> +	unsigned gpio_bank = gpio / 10;
> +	unsigned gpio_field_offset = (gpio - 10 * gpio_bank) * 3;
> +
> +	if (gpio >= BCM_NR_GPIOS)
> +		return -EINVAL;
> +
> +	gpiodir = readl(bcm2835_gpio->base + GPIOFSEL(gpio_bank));
> +	gpiodir &= ~(7 << gpio_field_offset);
> +	gpiodir |= function << gpio_field_offset;
> +	writel(gpiodir, bcm2835_gpio->base + GPIOFSEL(gpio_bank));
> +	gpiodir = readl(bcm2835_gpio->base + GPIOFSEL(gpio_bank));
> +
> +	return 0;
> +}
> +
> +int gpio_direction_input(unsigned gpio)
> +{
> +	return bcm2835_set_function(gpio, GPIO_FSEL_INPUT);
> +}
> +
> +int gpio_direction_output(unsigned gpio, int value)
> +{
> +	int ret;
> +	ret =  bcm2835_set_function(gpio, GPIO_FSEL_OUTPUT);
> +	if (ret >= 0)
> +		gpio_set_value(gpio, value);
> +	return ret;
> +}
> +
> +
please drop the extra line
> +void gpio_set_value(unsigned gpio, int value)
> +{
> +	unsigned gpio_bank = gpio / 32;
> +	unsigned gpio_field_offset = (gpio - 32 * gpio_bank);
gpio % 32 will do the tric
> +
> +	if (gpio >= BCM_NR_GPIOS)
> +		return;
> +	if (value)
> +		writel(1 << gpio_field_offset, bcm2835_gpio->base + GPIOSET(gpio_bank));
> +	else
> +		writel(1 << gpio_field_offset, bcm2835_gpio->base + GPIOCLR(gpio_bank));
> +}
> +
> +
> +int gpio_get_value(unsigned gpio)
> +{
> +	unsigned gpio_bank = gpio / 32;
> +	unsigned gpio_field_offset = (gpio - 32 * gpio_bank);
> +	unsigned lev;
> +
> +	if (gpio >= BCM_NR_GPIOS)
> +		return 0;
> +	lev = readl(bcm2835_gpio->base + GPIOLEV(gpio_bank));
> +	return 0x1 & (lev >> gpio_field_offset);
> +}
> \ No newline at end of file
> diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
> new file mode 100644
> index 0000000..04b37a8
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
> @@ -0,0 +1,7 @@
> +#ifndef __ASM_MACH_CLKDEV_H
> +#define __ASM_MACH_CLKDEV_H
> +
> +#define __clk_get(clk) ({ 1; })
> +#define __clk_put(clk) do { } while (0)
> +
> +#endif
> diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h b/arch/arm/mach-bcm2835/include/mach/clock.h
> new file mode 100644
> index 0000000..a365a77
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/clock.h
> @@ -0,0 +1,10 @@
> +#ifndef _BCM2708_CLOCK_H
> +#define _BCM2708_CLOCK_H
> +
> +int bcm2835_clk_create(struct clk *clk, const char *dev_id);
> +
> +struct clk {
> +	unsigned long rate;
> +};
> +
> +#endif
> \ No newline at end of file
> diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
> new file mode 100644
> index 0000000..b931e75
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/core.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> + 
> +#ifndef __BCM2835_CORE_H__
> +#define __BCM2835_CORE_H__
> +
> +void bcm2835_register_uart(void);
> +void bcm2835_add_device_sdram(u32 size);
> +
> +#endif
> diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
> new file mode 100644
> index 0000000..f1a7e4f
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
> @@ -0,0 +1,12 @@
> +#ifndef _BCM2708_GPIO_H
> +#define _BCM2708_GPIO_H
> +
> +#define BCM_NR_GPIOS 54 // number of gpio lines
no c++ comment
> +
> +extern int gpio_direction_input(unsigned gpio);
> +extern int gpio_direction_output(unsigned gpio, int value);
> +extern void gpio_set_value(unsigned gpio, int value);
> +extern int gpio_get_value(unsigned gpio);
> +
> +
> +#endif
> \ No newline at end of file
> diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
> new file mode 100644
> index 0000000..3b92005
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/platform.h
> @@ -0,0 +1,207 @@
> +/*
> + * arch/arm/mach-bcm2708/include/mach/platform.h
> + *
> + * Copyright (C) 2010 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#ifndef _BCM2708_PLATFORM_H
> +#define _BCM2708_PLATFORM_H
> +
> +
> +
> +/*
> + *  SDRAM
> + */
> +#define BCM2708_SDRAM_BASE           0x00000000
> +
> +/*
> + *  Logic expansion modules
> + *
> + */
> +
> +
> +/*
> + * Definitions and addresses for the ARM CONTROL logic
> + * This file is manually generated.
> + */
> +
> +#define BCM2708_PERI_BASE        0x20000000
> +#define ST_BASE                  (BCM2708_PERI_BASE + 0x3000)   /* System Timer */
> +#define DMA_BASE		 (BCM2708_PERI_BASE + 0x7000)	/* DMA controller */
too many whitespace please fix and sue tab for indentation

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-09-18 22:09 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-18 20:30 Carlo Caione
2012-09-18 20:30 ` [PATCH 2/2] Add Raspberry-Pi defconfig Carlo Caione
2012-09-18 22:07   ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-19 22:19     ` Carlo Caione
2012-09-20  5:19       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-18 22:06 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-19  7:42   ` [PATCH 1/2] Add bcm2835/Raspberry-Pi support Juergen Beisert
2012-09-19  8:14     ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-19  8:54       ` Juergen Beisert
2012-09-19  9:37         ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-19  9:10 ` Jan Lübbe
2012-09-19 10:00   ` Carlo Caione
2012-09-19 10:08     ` Jan Lübbe
2012-09-19 10:49       ` Carlo Caione
2012-09-19 10:49       ` Marc Kleine-Budde
2012-09-19 11:10         ` Carlo Caione
2012-09-19 11:13           ` Marc Kleine-Budde
2012-09-20 10:25     ` Thomas Petazzoni
2012-09-20 15:40 ` Jan Lübbe
2012-09-20 16:18   ` Carlo Caione

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120918220635.GT25990@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=carlo.caione@gmail.com \
    --cc=carlo@carlocaione.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox