From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Christoph Fritz <chf.fritz@googlemail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] net: add nameserver IPs to kernel-parameter ip=
Date: Sat, 22 Sep 2012 13:43:46 +0200 [thread overview]
Message-ID: <20120922114346.GT26553@game.jcrosoft.org> (raw)
In-Reply-To: <1348311530.3917.5.camel@mars>
On 12:58 Sat 22 Sep , Christoph Fritz wrote:
> Kernel-parameter "ip=" is used to assign network configuration.
> With linux kernel 3.7 it is also possible to set nameserver IPs.
>
> This patch adds two new options (nameserver0 and nameserver1) to
> ethernet device parameter. It also updates defaultenv version 1.
defaultenv-2 mandatory
v1 is for fix only
>
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> defaultenv/bin/boot | 4 +++-
> defaultenv/config | 2 ++
> net/eth.c | 2 ++
> 3 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/defaultenv/bin/boot b/defaultenv/bin/boot
> index 4e2056e..d5b5844 100644
> --- a/defaultenv/bin/boot
> +++ b/defaultenv/bin/boot
> @@ -61,7 +61,9 @@ if [ x$ip = xdhcp -o ]; then
> elif [ x$ip = xnone ]; then
> bootargs="$bootargs ip=none"
> else
> - bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask::eth0:"
> + bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:"
> + bootargs="$bootargs$eth0.netmask::eth0::"
> + bootargs="$bootargs$eth0.nameserver0:$eth0.nameserver1"
> fi
>
>
> diff --git a/defaultenv/config b/defaultenv/config
> index 391ba47..6596753 100644
> --- a/defaultenv/config
> +++ b/defaultenv/config
> @@ -18,6 +18,8 @@ global.dhcp.vendor_id=barebox
> #eth0.netmask=a.b.c.d
> #eth0.serverip=a.b.c.d
> #eth0.gateway=a.b.c.d
> +#eth0.nameserver0=a.b.c.d
> +#eth0.nameserver1=a.b.c.d
>
> # can be either 'tftp', 'nfs', 'nand', 'nor' or 'disk'
> kernel_loc=tftp
> diff --git a/net/eth.c b/net/eth.c
> index d42a72d..bb8157b 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -229,6 +229,8 @@ int eth_register(struct eth_device *edev)
> dev_add_param(dev, "gateway", eth_set_ipaddr, NULL, 0);
> dev_add_param(dev, "netmask", eth_set_ipaddr, NULL, 0);
> dev_add_param(dev, "serverip", eth_set_ipaddr, NULL, 0);
> + dev_add_param(dev, "nameserver0", eth_set_ipaddr, NULL, 0);
> + dev_add_param(dev, "nameserver1", eth_set_ipaddr, NULL, 0);
this is done via net as the nameserver is not interface specific
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-22 11:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-22 10:58 Christoph Fritz
2012-09-22 11:43 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-22 15:41 ` [PATCH 1/2][v2] " Christoph Fritz
2012-09-22 18:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-22 18:27 ` [PATCH 1/1] net: add multiple nameserver support Jean-Christophe PLAGNIOL-VILLARD
2012-09-22 19:25 ` Christoph Fritz
2012-09-22 20:16 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-23 12:11 ` [PATCH] " Christoph Fritz
2012-09-23 13:29 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-23 13:57 ` Christoph Fritz
2012-12-10 11:23 ` Christoph Fritz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120922114346.GT26553@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=chf.fritz@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox