From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [for master PATCH 1/2] miidev: add phy_addr detection support
Date: Tue, 2 Oct 2012 16:25:09 +0200 [thread overview]
Message-ID: <20121002142509.GX26553@game.jcrosoft.org> (raw)
In-Reply-To: <20121002132357.GK24458@pengutronix.de>
On 15:23 Tue 02 Oct , Sascha Hauer wrote:
> Hi J,
>
> Can you revamp this on current master? Without the detection part if a
> phy address is given, thus introducing no change when phy address is > 0.
on the master this patch is not usefull as you apply Eric fix
Best Regards,
J.
> Thanks
> Sascha
>
> On Tue, Aug 14, 2012 at 05:48:55PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > export via param the phy_addr and the phy_id detected
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> > Hi,
> >
> > this is need to fix the calao board support since the introduction of
> > the gigabit phy detection support
> >
> > Best Regards,
> > J.
> > drivers/net/miidev.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++----
> > include/miidev.h | 2 ++
> > 2 files changed, 72 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> > index b49944b..ab1811d 100644
> > --- a/drivers/net/miidev.c
> > +++ b/drivers/net/miidev.c
> > @@ -236,18 +236,82 @@ static struct file_operations miidev_ops = {
> > .lseek = dev_lseek_default,
> > };
> >
> > +static int get_phy_id(struct mii_device *mdev, int phy_addr,
> > + uint32_t *phy_id)
> > +{
> > + int val;
> > +
> > + val = mii_read(mdev, phy_addr, MII_PHYSID1);
> > + if (val < 0)
> > + return -EIO;
> > + *phy_id = (val & 0xffff) << 16;
> > + val = mii_read(mdev, phy_addr, MII_PHYSID2);
> > + if (val < 0)
> > + return -EIO;
> > + *phy_id |= (val & 0xffff);
> > +
> > + return 0;
> > +}
> > +
> > +static int phy_detect_one(struct mii_device *mdev, int phy_addr,
> > + uint32_t *phy_id)
> > +{
> > + uint32_t _phy_id;
> > + int ret;
> > +
> > + ret = get_phy_id(mdev, phy_addr, &_phy_id);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + /* If the phy_id is mostly Fs, there is no device there */
> > + if ((_phy_id & 0x1fffffff) == 0x1fffffff)
> > + return -EIO;
> > +
> > + *phy_id = _phy_id;
> > +
> > + return 0;
> > +}
> > +
> > +static int phy_detect(struct mii_device *mdev)
> > +{
> > + int phy_addr;
> > +
> > + for (phy_addr = 0; phy_addr <= 0x1f; phy_addr++) {
> > + if (!phy_detect_one(mdev, phy_addr, &mdev->phy_id))
> > + return phy_addr;
> > + }
> > +
> > + return -EIO;
> > +}
> > +
> > static int miidev_probe(struct device_d *dev)
> > {
> > struct mii_device *mdev = dev->priv;
> > int val;
> > int caps = 0;
> > + char str[11];
> > +
> > + if (mdev->address < 0) {
> > + int phy_addr;
> > +
> > + phy_addr = phy_detect(mdev);
> > +
> > + if (phy_addr < 0) {
> > + dev_err(dev, "cannot detect PHY\n");
> > + return -ENODEV;
> > + }
> > + mdev->address = phy_addr;
> > + } else {
> > + if (phy_detect_one(mdev, mdev->address, &mdev->phy_id) < 0)
> > + goto err_out;
> > + }
> > +
> > + sprintf(str, "%u", mdev->address);
> > + dev_add_param_fixed(dev, "phy_addr", str);
> > + sprintf(str, "0x%08x", mdev->phy_id);
> > + dev_add_param_fixed(dev, "phy_id", str);
> >
> > - val = mii_read(mdev, mdev->address, MII_PHYSID1);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
> > - val = mii_read(mdev, mdev->address, MII_PHYSID2);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
> > val = mii_read(mdev, mdev->address, MII_BMSR);
> > if (val < 0)
> > goto err_out;
> > diff --git a/include/miidev.h b/include/miidev.h
> > index 4bbf94c..2f39234 100644
> > --- a/include/miidev.h
> > +++ b/include/miidev.h
> > @@ -38,6 +38,8 @@ struct mii_device {
> > struct device_d *parent;
> >
> > int address; /* The address the phy has on the bus */
> > + uint32_t phy_id; /* The phy id */
> > +
> > int (*read) (struct mii_device *dev, int addr, int reg);
> > int (*write) (struct mii_device *dev, int addr, int reg, int value);
> >
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-10-02 14:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 15:48 Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 15:48 ` [for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr Jean-Christophe PLAGNIOL-VILLARD
2012-09-15 14:23 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 14:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 19:58 ` [for master PATCH 1/2] miidev: add phy_addr detection support Sascha Hauer
2012-08-15 4:32 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 7:09 ` Sascha Hauer
2012-09-10 15:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 7:53 ` Sascha Hauer
2012-09-11 8:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 9:14 ` Sascha Hauer
2012-09-11 9:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 13:23 ` Sascha Hauer
2012-10-02 14:25 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121002142509.GX26553@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox