From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 0/5] BCM2835/Raspberry-Pi support
Date: Mon, 15 Oct 2012 14:43:49 +0200 [thread overview]
Message-ID: <20121015124349.GX13639@game.jcrosoft.org> (raw)
In-Reply-To: <20121015065640.GF27665@pengutronix.de>
On 08:56 Mon 15 Oct , Sascha Hauer wrote:
>
> Jean-Christophe,
>
> Since you reviewed this series can I assume you give your Acked-by once
> you are happy with it?
I'm happy with it except one point that I just check with the mainline kernel
the DT
the timer as example is "brcm,bcm2835-system-timer" not "brcm,bcm2835-cs"
for gpio it's the right one
as we can agree to dt must be in sync
Best Regards,
J.
>
> Sascha
>
> On Sat, Oct 13, 2012 at 04:00:11PM +0200, Carlo Caione wrote:
> > The set is the same as before except for patch 05/05
> >
> > Carlo Caione (5):
> > BCM2835: add clocksource driver
> > BCM2835: add gpio driver
> > ARM1176: add support
> > BCM2835: add support (arch)
> > Raspberry-Pi: add support (board)
> >
> > arch/arm/Kconfig | 9 ++
> > arch/arm/Makefile | 2 +
> > arch/arm/boards/raspberry-pi/Makefile | 1 +
> > arch/arm/boards/raspberry-pi/config.h | 4 +
> > .../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
> > arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
> > arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
> > arch/arm/configs/rpi_defconfig | 40 +++++
> > arch/arm/cpu/Kconfig | 5 +
> > arch/arm/mach-bcm2835/Kconfig | 18 +++
> > arch/arm/mach-bcm2835/Makefile | 2 +
> > arch/arm/mach-bcm2835/clock.c | 39 +++++
> > arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
> > arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
> > arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
> > arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
> > arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
> > arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
> > arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
> > drivers/clocksource/Kconfig | 4 +
> > drivers/clocksource/Makefile | 1 +
> > drivers/clocksource/bcm2835.c | 95 ++++++++++++
> > drivers/gpio/Kconfig | 4 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
> > 25 files changed, 706 insertions(+)
> > create mode 100644 arch/arm/boards/raspberry-pi/Makefile
> > create mode 100644 arch/arm/boards/raspberry-pi/config.h
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
> > create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
> > create mode 100644 arch/arm/configs/rpi_defconfig
> > create mode 100644 arch/arm/mach-bcm2835/Kconfig
> > create mode 100644 arch/arm/mach-bcm2835/Makefile
> > create mode 100644 arch/arm/mach-bcm2835/clock.c
> > create mode 100644 arch/arm/mach-bcm2835/core.c
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
> > create mode 100644 drivers/clocksource/bcm2835.c
> > create mode 100644 drivers/gpio/gpio-bcm2835.c
> >
> > --
> > 1.7.12.3
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-10-15 12:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-13 14:00 Carlo Caione
2012-10-13 14:00 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
2012-10-13 14:00 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
2012-10-13 14:00 ` [PATCH 3/5] ARM1176: add support Carlo Caione
2012-10-13 14:00 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-13 14:00 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-15 6:56 ` [PATCH 0/5] BCM2835/Raspberry-Pi support Sascha Hauer
2012-10-15 12:43 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-15 14:20 ` Carlo Caione
2012-10-16 18:04 Carlo Caione
2012-10-18 19:42 Carlo Caione
2012-10-21 8:51 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121015124349.GX13639@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox