From: Sascha Hauer <s.hauer@pengutronix.de>
To: Alexander Shiyan <shc_work@mail.ru>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture
Date: Fri, 2 Nov 2012 11:25:31 +0100 [thread overview]
Message-ID: <20121102102531.GJ1641@pengutronix.de> (raw)
In-Reply-To: <1351847836-8221-1-git-send-email-shc_work@mail.ru>
On Fri, Nov 02, 2012 at 01:17:14PM +0400, Alexander Shiyan wrote:
> This patch adds new architecture (CLPS711X) into barebox.
> The core-logic functionality of the device is built around an ARM720T
> processor running at clock speeds up to 90 MHz.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied, thanks
Sascha
> ---
> arch/arm/Kconfig | 6 +
> arch/arm/Makefile | 1 +
> arch/arm/mach-clps711x/Kconfig | 8 +
> arch/arm/mach-clps711x/Makefile | 1 +
> arch/arm/mach-clps711x/clock.c | 113 ++++++++++
> arch/arm/mach-clps711x/devices.c | 37 +++
> arch/arm/mach-clps711x/include/mach/clkdev.h | 7 +
> arch/arm/mach-clps711x/include/mach/clps711x.h | 284 ++++++++++++++++++++++++
> arch/arm/mach-clps711x/include/mach/devices.h | 6 +
> arch/arm/mach-clps711x/reset.c | 21 ++
> 10 files changed, 484 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-clps711x/Kconfig
> create mode 100644 arch/arm/mach-clps711x/Makefile
> create mode 100644 arch/arm/mach-clps711x/clock.c
> create mode 100644 arch/arm/mach-clps711x/devices.c
> create mode 100644 arch/arm/mach-clps711x/include/mach/clkdev.h
> create mode 100644 arch/arm/mach-clps711x/include/mach/clps711x.h
> create mode 100644 arch/arm/mach-clps711x/include/mach/devices.h
> create mode 100644 arch/arm/mach-clps711x/reset.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 57b3ca7..28071a5 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -31,6 +31,11 @@ config ARCH_AT91
> select HAS_DEBUG_LL
> select HAVE_MACH_ARM_HEAD
>
> +config ARCH_CLPS711X
> + bool "Cirrus Logic EP711x/EP721x/EP731x"
> + select CLKDEV_LOOKUP
> + select CPU_32v4T
> +
> config ARCH_EP93XX
> bool "Cirrus Logic EP93xx"
> select CPU_ARM920T
> @@ -97,6 +102,7 @@ endchoice
>
> source arch/arm/cpu/Kconfig
> source arch/arm/mach-at91/Kconfig
> +source arch/arm/mach-clps711x/Kconfig
> source arch/arm/mach-ep93xx/Kconfig
> source arch/arm/mach-imx/Kconfig
> source arch/arm/mach-mxs/Kconfig
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 855043a..da80e00 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
> # Machine directory name. This list is sorted alphanumerically
> # by CONFIG_* macro name.
> machine-$(CONFIG_ARCH_AT91) := at91
> +machine-$(CONFIG_ARCH_CLPS711X) := clps711x
> machine-$(CONFIG_ARCH_EP93XX) := ep93xx
> machine-$(CONFIG_ARCH_IMX) := imx
> machine-$(CONFIG_ARCH_MXS) := mxs
> diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
> new file mode 100644
> index 0000000..56ca2ca
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/Kconfig
> @@ -0,0 +1,8 @@
> +if ARCH_CLPS711X
> +
> +choice
> + prompt "Cirrus Logic EP711x/EP721x/EP731x Board Type"
> +
> +endchoice
> +
> +endif
> diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
> new file mode 100644
> index 0000000..41012bc
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/Makefile
> @@ -0,0 +1 @@
> +obj-y += clock.o devices.o reset.o
> diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c
> new file mode 100644
> index 0000000..5cafba9
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/clock.c
> @@ -0,0 +1,113 @@
> +/*
> + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <clock.h>
> +#include <asm/io.h>
> +#include <linux/clkdev.h>
> +
> +#include <mach/clps711x.h>
> +
> +struct clk {
> + unsigned long rate;
> +};
> +
> +static struct clk uart_clk, bus_clk;
> +
> +uint64_t clocksource_read(void)
> +{
> + return ~readw(TC2D);
> +}
> +
> +static struct clocksource cs = {
> + .read = clocksource_read,
> + .mask = CLOCKSOURCE_MASK(16),
> +};
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> + return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +int clk_enable(struct clk *clk)
> +{
> + /* Do nothing */
> + return 0;
> +}
> +EXPORT_SYMBOL(clk_enable);
> +
> +void clk_disable(struct clk *clk)
> +{
> + /* Do nothing */
> +}
> +EXPORT_SYMBOL(clk_disable);
> +
> +static int clocks_init(void)
> +{
> + int osc, ext, pll, cpu, timer;
> + u32 tmp;
> +
> + osc = 3686400;
> + ext = 13000000;
> +
> + tmp = readl(PLLR) >> 24;
> + if (tmp)
> + pll = (osc * tmp) / 2;
> + else
> + pll = 73728000; /* Default value for old CPUs */
> +
> + tmp = readl(SYSFLG2);
> + if (tmp & SYSFLG2_CKMODE) {
> + cpu = ext;
> + bus_clk.rate = cpu;
> + } else {
> + cpu = pll;
> + if (cpu >= 36864000)
> + bus_clk.rate = cpu / 2;
> + else
> + bus_clk.rate = 36864000 / 2;
> + }
> +
> + uart_clk.rate = bus_clk.rate / 10;
> +
> + if (tmp & SYSFLG2_CKMODE) {
> + tmp = readw(SYSCON2);
> + if (tmp & SYSCON2_OSTB)
> + timer = ext / 26;
> + else
> + timer = 541440;
> + } else
> + timer = cpu / 144;
> +
> + tmp = readl(SYSCON1);
> + tmp &= ~SYSCON1_TC2M; /* Free running mode */
> + tmp |= SYSCON1_TC2S; /* High frequency source */
> + writel(tmp, SYSCON1);
> +
> + clocks_calc_mult_shift(&cs.mult, &cs.shift, timer, NSEC_PER_SEC, 10);
> +
> + return init_clock(&cs);
> +}
> +core_initcall(clocks_init);
> +
> +static struct clk_lookup clocks_lookups[] = {
> + CLKDEV_CON_ID("bus", &bus_clk),
> + CLKDEV_DEV_ID("clps711x_serial0", &uart_clk),
> + CLKDEV_DEV_ID("clps711x_serial1", &uart_clk),
> +};
> +
> +static int clkdev_init(void)
> +{
> + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> +
> + return 0;
> +}
> +postcore_initcall(clkdev_init);
> diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
> new file mode 100644
> index 0000000..c5fcbf2
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/devices.c
> @@ -0,0 +1,37 @@
> +/*
> + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +
> +#include <asm/io.h>
> +
> +#include <mach/clps711x.h>
> +
> +inline void _clps711x_setup_memcfg(int bank, u32 addr, u32 val)
> +{
> + u32 tmp = readl(addr);
> +
> + tmp &= ~(0xff << (bank * 8));
> + tmp |= val << (bank * 8);
> +
> + writel(tmp, addr);
> +}
> +
> +void clps711x_setup_memcfg(int bank, u32 val)
> +{
> + switch (bank) {
> + case 0 ... 3:
> + _clps711x_setup_memcfg(bank, MEMCFG1, val);
> + break;
> + case 4 ... 7:
> + _clps711x_setup_memcfg(bank - 4, MEMCFG2, val);
> + break;
> + }
> +}
> diff --git a/arch/arm/mach-clps711x/include/mach/clkdev.h b/arch/arm/mach-clps711x/include/mach/clkdev.h
> new file mode 100644
> index 0000000..9278209
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/include/mach/clkdev.h
> @@ -0,0 +1,7 @@
> +#ifndef __MACH_CLKDEV_H
> +#define __MACH_CLKDEV_H
> +
> +#define __clk_get(clk) ({ 1; })
> +#define __clk_put(clk) do { } while (0)
> +
> +#endif
> diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
> new file mode 100644
> index 0000000..048992a
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
> @@ -0,0 +1,284 @@
> +/*
> + * Hardware definitions for Cirrus Logic CLPS711X
> + *
> + * Copyright (C) 2000 Deep Blue Solutions Ltd.
> + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __MACH_CLPS711X_H
> +#define __MACH_CLPS711X_H
> +
> +#define CS0_BASE (0x00000000)
> +#define CS1_BASE (0x10000000)
> +#define CS2_BASE (0x20000000)
> +#define CS3_BASE (0x30000000)
> +#define CS4_BASE (0x40000000)
> +#define CS5_BASE (0x50000000)
> +#define CS6_BASE (0x60000000)
> +#define CS7_BASE (0x70000000)
> +#define REGS_BASE (0x80000000)
> +#define SDRAM0_BASE (0xc0000000)
> +#define SDRAM1_BASE (0xd0000000)
> +
> +#define PADR (REGS_BASE + 0x0000)
> +#define PBDR (REGS_BASE + 0x0001)
> +#define PCDR (REGS_BASE + 0x0002)
> +#define PDDR (REGS_BASE + 0x0003)
> +#define PADDR (REGS_BASE + 0x0040)
> +#define PBDDR (REGS_BASE + 0x0041)
> +#define PCDDR (REGS_BASE + 0x0042)
> +#define PDDDR (REGS_BASE + 0x0043)
> +#define PEDR (REGS_BASE + 0x0083)
> +#define PEDDR (REGS_BASE + 0x00c3)
> +#define SYSCON1 (REGS_BASE + 0x0100)
> +#define SYSFLG1 (REGS_BASE + 0x0140)
> +#define MEMCFG1 (REGS_BASE + 0x0180)
> +#define MEMCFG2 (REGS_BASE + 0x01c0)
> +#define DRFPR (REGS_BASE + 0x0200)
> +#define INTSR1 (REGS_BASE + 0x0240)
> +#define INTMR1 (REGS_BASE + 0x0280)
> +#define LCDCON (REGS_BASE + 0x02c0)
> +#define TC1D (REGS_BASE + 0x0300)
> +#define TC2D (REGS_BASE + 0x0340)
> +#define RTCDR (REGS_BASE + 0x0380)
> +#define RTCMR (REGS_BASE + 0x03c0)
> +#define PMPCON (REGS_BASE + 0x0400)
> +#define CODR (REGS_BASE + 0x0440)
> +#define UARTDR1 (REGS_BASE + 0x0480)
> +#define UBRLCR1 (REGS_BASE + 0x04c0)
> +#define SYNCIO (REGS_BASE + 0x0500)
> +#define PALLSW (REGS_BASE + 0x0540)
> +#define PALMSW (REGS_BASE + 0x0580)
> +#define STFCLR (REGS_BASE + 0x05c0)
> +#define BLEOI (REGS_BASE + 0x0600)
> +#define MCEOI (REGS_BASE + 0x0640)
> +#define TEOI (REGS_BASE + 0x0680)
> +#define TC1EOI (REGS_BASE + 0x06c0)
> +#define TC2EOI (REGS_BASE + 0x0700)
> +#define RTCEOI (REGS_BASE + 0x0740)
> +#define UMSEOI (REGS_BASE + 0x0780)
> +#define COEOI (REGS_BASE + 0x07c0)
> +#define HALT (REGS_BASE + 0x0800)
> +#define STDBY (REGS_BASE + 0x0840)
> +
> +#define FBADDR (REGS_BASE + 0x1000)
> +#define SYSCON2 (REGS_BASE + 0x1100)
> +#define SYSFLG2 (REGS_BASE + 0x1140)
> +#define INTSR2 (REGS_BASE + 0x1240)
> +#define INTMR2 (REGS_BASE + 0x1280)
> +#define UARTDR2 (REGS_BASE + 0x1480)
> +#define UBRLCR2 (REGS_BASE + 0x14c0)
> +#define SS2DR (REGS_BASE + 0x1500)
> +#define SRXEOF (REGS_BASE + 0x1600)
> +#define SS2POP (REGS_BASE + 0x16c0)
> +#define KBDEOI (REGS_BASE + 0x1700)
> +
> +#define DAIR (REGS_BASE + 0x2000)
> +#define DAIDR0 (REGS_BASE + 0x2040)
> +#define DAIDR1 (REGS_BASE + 0x2080)
> +#define DAIDR2 (REGS_BASE + 0x20c0)
> +#define DAISR (REGS_BASE + 0x2100)
> +#define SYSCON3 (REGS_BASE + 0x2200)
> +#define INTSR3 (REGS_BASE + 0x2240)
> +#define INTMR3 (REGS_BASE + 0x2280)
> +#define LEDFLSH (REGS_BASE + 0x22c0)
> +#define SDCONF (REGS_BASE + 0x2300)
> +#define SDRFPR (REGS_BASE + 0x2340)
> +#define UNIQID (REGS_BASE + 0x2440)
> +#define DAI64FS (REGS_BASE + 0x2600)
> +#define PLLW (REGS_BASE + 0x2610)
> +#define PLLR (REGS_BASE + 0xa5a8)
> +#define RANDID0 (REGS_BASE + 0x2700)
> +#define RANDID1 (REGS_BASE + 0x2704)
> +#define RANDID2 (REGS_BASE + 0x2708)
> +#define RANDID3 (REGS_BASE + 0x270c)
> +
> +/* common bits: SYSCON1 / SYSCON2 */
> +#define SYSCON_UARTEN (1 << 8)
> +
> +#define SYSCON1_KBDSCAN(x) ((x) & 15)
> +#define SYSCON1_KBDSCANMASK (15)
> +#define SYSCON1_TC1M (1 << 4)
> +#define SYSCON1_TC1S (1 << 5)
> +#define SYSCON1_TC2M (1 << 6)
> +#define SYSCON1_TC2S (1 << 7)
> +#define SYSCON1_UART1EN SYSCON_UARTEN
> +#define SYSCON1_BZTOG (1 << 9)
> +#define SYSCON1_BZMOD (1 << 10)
> +#define SYSCON1_DBGEN (1 << 11)
> +#define SYSCON1_LCDEN (1 << 12)
> +#define SYSCON1_CDENTX (1 << 13)
> +#define SYSCON1_CDENRX (1 << 14)
> +#define SYSCON1_SIREN (1 << 15)
> +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16)
> +#define SYSCON1_ADCKSEL_MASK (3 << 16)
> +#define SYSCON1_EXCKEN (1 << 18)
> +#define SYSCON1_WAKEDIS (1 << 19)
> +#define SYSCON1_IRTXM (1 << 20)
> +
> +/* common bits: SYSFLG1 / SYSFLG2 */
> +#define SYSFLG_UBUSY (1 << 11)
> +#define SYSFLG_URXFE (1 << 22)
> +#define SYSFLG_UTXFF (1 << 23)
> +
> +#define SYSFLG1_MCDR (1 << 0)
> +#define SYSFLG1_DCDET (1 << 1)
> +#define SYSFLG1_WUDR (1 << 2)
> +#define SYSFLG1_WUON (1 << 3)
> +#define SYSFLG1_CTS (1 << 8)
> +#define SYSFLG1_DSR (1 << 9)
> +#define SYSFLG1_DCD (1 << 10)
> +#define SYSFLG1_UBUSY SYSFLG_UBUSY
> +#define SYSFLG1_NBFLG (1 << 12)
> +#define SYSFLG1_RSTFLG (1 << 13)
> +#define SYSFLG1_PFFLG (1 << 14)
> +#define SYSFLG1_CLDFLG (1 << 15)
> +#define SYSFLG1_URXFE SYSFLG_URXFE
> +#define SYSFLG1_UTXFF SYSFLG_UTXFF
> +#define SYSFLG1_CRXFE (1 << 24)
> +#define SYSFLG1_CTXFF (1 << 25)
> +#define SYSFLG1_SSIBUSY (1 << 26)
> +#define SYSFLG1_ID (1 << 29)
> +#define SYSFLG1_VERID(x) (((x) >> 30) & 3)
> +#define SYSFLG1_VERID_MASK (3 << 30)
> +
> +#define SYSFLG2_SSRXOF (1 << 0)
> +#define SYSFLG2_RESVAL (1 << 1)
> +#define SYSFLG2_RESFRM (1 << 2)
> +#define SYSFLG2_SS2RXFE (1 << 3)
> +#define SYSFLG2_SS2TXFF (1 << 4)
> +#define SYSFLG2_SS2TXUF (1 << 5)
> +#define SYSFLG2_CKMODE (1 << 6)
> +#define SYSFLG2_UBUSY SYSFLG_UBUSY
> +#define SYSFLG2_URXFE SYSFLG_URXFE
> +#define SYSFLG2_UTXFF SYSFLG_UTXFF
> +
> +#define LCDCON_GSEN (1 << 30)
> +#define LCDCON_GSMD (1 << 31)
> +
> +#define SYSCON2_SERSEL (1 << 0)
> +#define SYSCON2_KBD6 (1 << 1)
> +#define SYSCON2_DRAMZ (1 << 2)
> +#define SYSCON2_KBWEN (1 << 3)
> +#define SYSCON2_SS2TXEN (1 << 4)
> +#define SYSCON2_PCCARD1 (1 << 5)
> +#define SYSCON2_PCCARD2 (1 << 6)
> +#define SYSCON2_SS2RXEN (1 << 7)
> +#define SYSCON2_UART2EN SYSCON_UARTEN
> +#define SYSCON2_SS2MAEN (1 << 9)
> +#define SYSCON2_OSTB (1 << 12)
> +#define SYSCON2_CLKENSL (1 << 13)
> +#define SYSCON2_BUZFREQ (1 << 14)
> +
> +/* common bits: UARTDR1 / UARTDR2 */
> +#define UARTDR_FRMERR (1 << 8)
> +#define UARTDR_PARERR (1 << 9)
> +#define UARTDR_OVERR (1 << 10)
> +
> +/* common bits: UBRLCR1 / UBRLCR2 */
> +#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
> +#define UBRLCR_BREAK (1 << 12)
> +#define UBRLCR_PRTEN (1 << 13)
> +#define UBRLCR_EVENPRT (1 << 14)
> +#define UBRLCR_XSTOP (1 << 15)
> +#define UBRLCR_FIFOEN (1 << 16)
> +#define UBRLCR_WRDLEN5 (0 << 17)
> +#define UBRLCR_WRDLEN6 (1 << 17)
> +#define UBRLCR_WRDLEN7 (2 << 17)
> +#define UBRLCR_WRDLEN8 (3 << 17)
> +#define UBRLCR_WRDLEN_MASK (3 << 17)
> +
> +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8)
> +#define SYNCIO_SMCKEN (1 << 13)
> +#define SYNCIO_TXFRMEN (1 << 14)
> +
> +#define DAIR_RESERVED (0x0404)
> +#define DAIR_DAIEN (1 << 16)
> +#define DAIR_ECS (1 << 17)
> +#define DAIR_LCTM (1 << 19)
> +#define DAIR_LCRM (1 << 20)
> +#define DAIR_RCTM (1 << 21)
> +#define DAIR_RCRM (1 << 22)
> +#define DAIR_LBM (1 << 23)
> +
> +#define DAIDR2_FIFOEN (1 << 15)
> +#define DAIDR2_FIFOLEFT (0x0d << 16)
> +#define DAIDR2_FIFORIGHT (0x11 << 16)
> +
> +#define DAISR_RCTS (1 << 0)
> +#define DAISR_RCRS (1 << 1)
> +#define DAISR_LCTS (1 << 2)
> +#define DAISR_LCRS (1 << 3)
> +#define DAISR_RCTU (1 << 4)
> +#define DAISR_RCRO (1 << 5)
> +#define DAISR_LCTU (1 << 6)
> +#define DAISR_LCRO (1 << 7)
> +#define DAISR_RCNF (1 << 8)
> +#define DAISR_RCNE (1 << 9)
> +#define DAISR_LCNF (1 << 10)
> +#define DAISR_LCNE (1 << 11)
> +#define DAISR_FIFO (1 << 12)
> +
> +#define DAI64FS_I2SF64 (1 << 0)
> +#define DAI64FS_AUDIOCLKEN (1 << 1)
> +#define DAI64FS_AUDIOCLKSRC (1 << 2)
> +#define DAI64FS_MCLK256EN (1 << 3)
> +#define DAI64FS_LOOPBACK (1 << 5)
> +#define DAI64FS_AUDIV_MASK (0x7f)
> +#define DAI64FS_AUDIV(x) (((x) & DAI64FS_AUDIV_MASK) << 8)
> +
> +#define SYSCON3_ADCCON (1 << 0)
> +#define SYSCON3_CLKCTL0 (1 << 1)
> +#define SYSCON3_CLKCTL1 (1 << 2)
> +#define SYSCON3_DAISEL (1 << 3)
> +#define SYSCON3_ADCCKNSEN (1 << 4)
> +#define SYSCON3_VERSN(x) (((x) >> 5) & 7)
> +#define SYSCON3_VERSN_MASK (7 << 5)
> +#define SYSCON3_FASTWAKE (1 << 8)
> +#define SYSCON3_DAIEN (1 << 9)
> +#define SYSCON3_128FS SYSCON3_DAIEN
> +#define SYSCON3_ENPD67 (1 << 10)
> +
> +#define SDCONF_ACTIVE (1 << 10)
> +#define SDCONF_CLKCTL (1 << 9)
> +#define SDCONF_WIDTH_4 (0 << 7)
> +#define SDCONF_WIDTH_8 (1 << 7)
> +#define SDCONF_WIDTH_16 (2 << 7)
> +#define SDCONF_WIDTH_32 (3 << 7)
> +#define SDCONF_SIZE_16 (0 << 5)
> +#define SDCONF_SIZE_64 (1 << 5)
> +#define SDCONF_SIZE_128 (2 << 5)
> +#define SDCONF_SIZE_256 (3 << 5)
> +#define SDCONF_CASLAT_2 (2)
> +#define SDCONF_CASLAT_3 (3)
> +
> +#define MEMCFG_BUS_WIDTH_32 (1)
> +#define MEMCFG_BUS_WIDTH_16 (0)
> +#define MEMCFG_BUS_WIDTH_8 (3)
> +
> +#define MEMCFG_SQAEN (1 << 6)
> +#define MEMCFG_CLKENB (1 << 7)
> +
> +#define MEMCFG_WAITSTATE_8_3 (0 << 2)
> +#define MEMCFG_WAITSTATE_7_3 (1 << 2)
> +#define MEMCFG_WAITSTATE_6_3 (2 << 2)
> +#define MEMCFG_WAITSTATE_5_3 (3 << 2)
> +#define MEMCFG_WAITSTATE_4_2 (4 << 2)
> +#define MEMCFG_WAITSTATE_3_2 (5 << 2)
> +#define MEMCFG_WAITSTATE_2_2 (6 << 2)
> +#define MEMCFG_WAITSTATE_1_2 (7 << 2)
> +#define MEMCFG_WAITSTATE_8_1 (8 << 2)
> +#define MEMCFG_WAITSTATE_7_1 (9 << 2)
> +#define MEMCFG_WAITSTATE_6_1 (10 << 2)
> +#define MEMCFG_WAITSTATE_5_1 (11 << 2)
> +#define MEMCFG_WAITSTATE_4_0 (12 << 2)
> +#define MEMCFG_WAITSTATE_3_0 (13 << 2)
> +#define MEMCFG_WAITSTATE_2_0 (14 << 2)
> +#define MEMCFG_WAITSTATE_1_0 (15 << 2)
> +
> +#endif
> diff --git a/arch/arm/mach-clps711x/include/mach/devices.h b/arch/arm/mach-clps711x/include/mach/devices.h
> new file mode 100644
> index 0000000..7e5eaf9
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/include/mach/devices.h
> @@ -0,0 +1,6 @@
> +#ifndef __MACH_DEVICES_H
> +#define __MACH_DEVICES_H
> +
> +void clps711x_setup_memcfg(int bank, u32 val);
> +
> +#endif
> diff --git a/arch/arm/mach-clps711x/reset.c b/arch/arm/mach-clps711x/reset.c
> new file mode 100644
> index 0000000..4a42ef4
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/reset.c
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <common.h>
> +
> +extern void start(void);
> +
> +void __noreturn reset_cpu(unsigned long addr)
> +{
> + arch_shutdown();
> +
> + asm("mov pc, #0");
> +
> + hang();
> +}
> --
> 1.7.8.6
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-11-02 10:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-02 9:17 Alexander Shiyan
2012-11-02 9:17 ` [PATCH v4 2/3] ARM: clps711x: Add serial driver Alexander Shiyan
2012-11-02 9:17 ` [PATCH v4 3/3] ARM: clps711x: Add generic board support (CLEP7212) Alexander Shiyan
2012-11-02 10:24 ` [PATCH v4 1/3] ARM: Add initial support for CLPS711X architecture Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 10:35 ` Alexander Shiyan
2012-11-02 10:25 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121102102531.GJ1641@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=shc_work@mail.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox