From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [For next PATCH 1/1] versatilepb: add i2c support
Date: Fri, 2 Nov 2012 11:30:59 +0100 [thread overview]
Message-ID: <20121102103059.GL1641@pengutronix.de> (raw)
In-Reply-To: <1351763567-6641-1-git-send-email-plagnioj@jcrosoft.com>
On Thu, Nov 01, 2012 at 10:52:47AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> apply over next
>
> depends on verstile i2c driver send via i2c algo-bit series
Applied, thanks
Sascha
>
> Best Regards,
> J.
> arch/arm/boards/versatile/versatilepb.c | 1 +
> arch/arm/configs/versatilepb_defconfig | 3 +++
> arch/arm/mach-versatile/core.c | 7 +++++++
> arch/arm/mach-versatile/include/mach/init.h | 1 +
> 4 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/boards/versatile/versatilepb.c b/arch/arm/boards/versatile/versatilepb.c
> index 5a9c0b6..2eb7473 100644
> --- a/arch/arm/boards/versatile/versatilepb.c
> +++ b/arch/arm/boards/versatile/versatilepb.c
> @@ -47,6 +47,7 @@ mem_initcall(vpb_mem_init);
> static int vpb_devices_init(void)
> {
> add_cfi_flash_device(DEVICE_ID_DYNAMIC, VERSATILE_FLASH_BASE, VERSATILE_FLASH_SIZE, 0);
> + versatile_register_i2c();
> devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self");
> devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
>
> diff --git a/arch/arm/configs/versatilepb_defconfig b/arch/arm/configs/versatilepb_defconfig
> index 4c71c3c..f6fa454 100644
> --- a/arch/arm/configs/versatilepb_defconfig
> +++ b/arch/arm/configs/versatilepb_defconfig
> @@ -34,6 +34,7 @@ CONFIG_CMD_TIMEOUT=y
> CONFIG_CMD_PARTITION=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_I2C=y
> CONFIG_NET=y
> CONFIG_NET_DHCP=y
> CONFIG_NET_NFS=y
> @@ -44,6 +45,8 @@ CONFIG_NET_NETCONSOLE=y
> CONFIG_NET_RESOLV=y
> CONFIG_SERIAL_AMBA_PL011=y
> CONFIG_DRIVER_NET_SMC91111=y
> +CONFIG_I2C=y
> +CONFIG_I2C_VERSATILE=y
> CONFIG_GPIO_PL061=y
> CONFIG_FS_CRAMFS=y
> CONFIG_SHA1=y
> diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
> index 6e913df..8aca2a1 100644
> --- a/arch/arm/mach-versatile/core.c
> +++ b/arch/arm/mach-versatile/core.c
> @@ -26,6 +26,7 @@
> #include <init.h>
> #include <clock.h>
> #include <debug_ll.h>
> +#include <sizes.h>
>
> #include <linux/clkdev.h>
> #include <linux/clk.h>
> @@ -182,6 +183,12 @@ void versatile_register_uart(unsigned id)
> amba_apb_device_add(NULL, "uart-pl011", id, start, 4096, NULL, 0);
> }
>
> +void versatile_register_i2c(void)
> +{
> + add_generic_device("versatile-i2c", DEVICE_ID_DYNAMIC, NULL,
> + VERSATILE_I2C_BASE, SZ_4K, IORESOURCE_MEM, NULL);
> +}
> +
> void __noreturn reset_cpu (unsigned long ignored)
> {
> u32 val;
> diff --git a/arch/arm/mach-versatile/include/mach/init.h b/arch/arm/mach-versatile/include/mach/init.h
> index 878cde0..b40e4f9 100644
> --- a/arch/arm/mach-versatile/include/mach/init.h
> +++ b/arch/arm/mach-versatile/include/mach/init.h
> @@ -4,5 +4,6 @@
>
> void versatile_add_sdram(u32 size);
> void versatile_register_uart(unsigned id);
> +void versatile_register_i2c(void);
>
> #endif
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-11-02 10:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-01 9:52 Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 10:30 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121102103059.GL1641@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox