[PATCH 0/4 v3] at91sam9x5ek: add spi and mci support

[PATCH 0/4 v3] at91sam9x5ek: add spi and mci support

[Jean-Christophe PLAGNIOL-VILLARD]

HI,
	v3: rebase on the v3 of at91sam9xek i2c support

	with this +1 patch serie the support of the at91sam9x5ek is mostly
	complete

	This will add spi and mci0 support as spi0 and mci0 conflict

	We are still missing framebuffer, usb host and device and hardware i2c support
	but this wil be added later

	This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries

	the correct version

	this one work but brake the etherent as it mux the 4 cs as gpio and we
	use them on the eth0

The following changes since commit b3a0963d358e14180e9bbde68ab78fdebae071b7:

  m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91sam9x5ek_mci_spi

for you to fetch changes up to dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:

  at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
      at91sam9x5: add spi support
      at91sam9x5ek: add spi support
      at91sam9x5: add mci support
      at91sam9x5ek: add mci support

 arch/arm/boards/at91sam9x5ek/init.c     |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig |   10 +++++++---
 arch/arm/mach-at91/at91sam9x5.c         |    4 ++++
 arch/arm/mach-at91/at91sam9x5_devices.c |  124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 192 insertions(+), 3 deletions(-)

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/4] at91sam9x5: add spi support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9x5.c         |    2 +
 arch/arm/mach-at91/at91sam9x5_devices.c |   62 +++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index c256989..a9065ff 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -205,6 +205,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("macb_clk", "macb0", &macb0_clk),
 	CLKDEV_CON_DEV_ID("macb_clk", "macb1", &macb1_clk),
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9x5_devices.c b/arch/arm/mach-at91/at91sam9x5_devices.c
index 5a24325..710ded7 100644
--- a/arch/arm/mach-at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/at91sam9x5_devices.c
@@ -228,6 +228,68 @@ void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_de
 #endif
 
 /* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+static unsigned spi0_standard_cs[4] = { AT91_PIN_PA14, AT91_PIN_PA7, AT91_PIN_PA1, AT91_PIN_PB3 };
+
+static unsigned spi1_standard_cs[4] = { AT91_PIN_PA8, AT91_PIN_PA0, AT91_PIN_PA31, AT91_PIN_PA30 };
+
+static struct at91_spi_platform_data spi_pdata[] = {
+	[0] = {
+		.chipselect = spi0_standard_cs,
+		.num_chipselect = ARRAY_SIZE(spi0_standard_cs),
+	},
+	[1] = {
+		.chipselect = spi1_standard_cs,
+		.num_chipselect = ARRAY_SIZE(spi1_standard_cs),
+	},
+};
+
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+	int i;
+	int cs_pin;
+	resource_size_t start = ~0;
+
+	BUG_ON(spi_id > 1);
+
+	if (!pdata)
+		pdata = &spi_pdata[spi_id];
+
+	for (i = 0; i < pdata->num_chipselect; i++) {
+		cs_pin = pdata->chipselect[i];
+
+		/* enable chip-select pin */
+		if (cs_pin > 0)
+			at91_set_gpio_output(cs_pin, 1);
+	}
+
+	/* Configure SPI bus(es) */
+	switch (spi_id) {
+	case 0:
+		start = AT91SAM9X5_BASE_SPI0;
+		at91_set_A_periph(AT91_PIN_PA11, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA12, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA13, 0);	/* SPI0_SPCK */
+		break;
+	case 1:
+		start = AT91SAM9X5_BASE_SPI1;
+		at91_set_B_periph(AT91_PIN_PA21, 0);	/* SPI1_MISO */
+		at91_set_B_periph(AT91_PIN_PA22, 0);	/* SPI1_MOSI */
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* SPI1_SPCK */
+		break;
+	}
+
+	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, pdata);
+}
+#else
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/4] at91sam9x5ek: add spi support

[Jean-Christophe PLAGNIOL-VILLARD]

on all the cpu module we have a at25 except on the cogent where we have a at45

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9x5ek/init.c     |   37 +++++++++++++++++++++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig |    5 ++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index dbb9bb5..d97da2b 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -41,6 +41,7 @@
 #include <readkey.h>
 #include <linux/w1-gpio.h>
 #include <w1_mac_address.h>
+#include <spi/spi.h>
 
 #include "hw_version.h"
 
@@ -132,6 +133,41 @@ static void ek_add_device_i2c(void)
 	at91_add_device_i2c(0, i2c_devices, ARRAY_SIZE(i2c_devices));
 }
 
+static const struct spi_board_info ek_cm_cogent_spi_devices[] = {
+	{
+		.name		= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+};
+
+static const struct spi_board_info ek_spi_devices[] = {
+	{
+		.name		= "m25p80",
+		.chip_select	= 0,
+		.max_speed_hz	= 30 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+};
+
+static unsigned spi0_standard_cs[] = { AT91_PIN_PA14};
+static struct at91_spi_platform_data spi_pdata = {
+	.chipselect = spi0_standard_cs,
+	.num_chipselect = ARRAY_SIZE(spi0_standard_cs),
+};
+
+static void ek_add_device_spi(void)
+{
+	if (at91sam9x5ek_cm_is_vendor(VENDOR_COGENT))
+		spi_register_board_info(ek_cm_cogent_spi_devices,
+				ARRAY_SIZE(ek_cm_cogent_spi_devices));
+	else
+		spi_register_board_info(ek_spi_devices,
+				ARRAY_SIZE(ek_spi_devices));
+	at91_add_device_spi(0, &spi_pdata);
+}
+
 /*
  * USB Host port
  */
@@ -188,6 +224,7 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_w1();
 	ek_add_device_nand();
 	ek_add_device_eth();
+	ek_add_device_spi();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_led();
 	ek_add_device_i2c();
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 3e66c44..5b17002 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -52,10 +52,13 @@ CONFIG_CMD_TFTP=y
 CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_MACB=y
-# CONFIG_SPI is not set
+CONFIG_DRIVER_SPI_ATMEL=y
+CONFIG_MTD_M25P80=y
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
 CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_DATAFLASH=y
 CONFIG_NAND=y
 # CONFIG_NAND_ECC_HW is not set
 # CONFIG_NAND_ECC_HW_SYNDROME is not set
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/4] at91sam9x5: add mci support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9x5.c         |    2 +
 arch/arm/mach-at91/at91sam9x5_devices.c |   62 +++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index a9065ff..7c7d997 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -207,6 +207,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci1", &mmc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9x5_devices.c b/arch/arm/mach-at91/at91sam9x5_devices.c
index 710ded7..14fcb1e 100644
--- a/arch/arm/mach-at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/at91sam9x5_devices.c
@@ -123,6 +123,68 @@ void at91_add_device_eth(int id, struct at91_ether_platform_data *data)
 void at91_add_device_eth(int id, struct at91_ether_platform_data *data) {}
 #endif
 
+#if defined(CONFIG_MCI_ATMEL)
+/* Consider only one slot : slot 0 */
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+{
+	resource_size_t start = ~0;
+
+	if (!data)
+		return;
+
+	/* Must have at least one usable slot */
+	if (!data->bus_width)
+		return;
+
+	/* input/irq */
+	if (data->detect_pin) {
+		at91_set_gpio_input(data->detect_pin, 1);
+		at91_set_deglitch(data->detect_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		start = AT91SAM9X5_BASE_MCI0;
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA17, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA16, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA15, 1);
+		if (data->bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA18, 1);
+			at91_set_A_periph(AT91_PIN_PA19, 1);
+			at91_set_A_periph(AT91_PIN_PA20, 1);
+		}
+	} else {			/* MCI1 */
+		start = AT91SAM9X5_BASE_MCI1;
+
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA13, 0);
+
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA12, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA11, 1);
+		if (data->bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA2, 1);
+			at91_set_B_periph(AT91_PIN_PA3, 1);
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+		}
+	}
+
+	add_generic_device("atmel_mci", mmc_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/4] at91sam9x5ek: add mci support

[Jean-Christophe PLAGNIOL-VILLARD]

only add mci0 (microSD slot) as mci1 conflict with spi0

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9x5ek/init.c     |   20 ++++++++++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig |    5 +++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index d97da2b..4b3c099 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -115,6 +115,25 @@ static void ek_add_device_eth(void)
 	at91_add_device_eth(0, &macb_pdata);
 }
 
+/*
+ * MCI (SD/MMC)
+ */
+/* mci0 detect_pin is revision dependent */
+static struct atmel_mci_platform_data mci0_data = {
+	.bus_width	= 4,
+	.detect_pin	= AT91_PIN_PD15,
+	.wp_pin		= 0,
+};
+
+static void ek_add_device_mci(void)
+{
+	if (at91sam9x5ek_cm_is_vendor(VENDOR_COGENT))
+		mci0_data.detect_pin = 0;
+
+	/* MMC0 */
+	at91_add_device_mci(0, &mci0_data);
+}
+
 struct qt1070_platform_data qt1070_pdata = {
 	.irq_pin	= AT91_PIN_PA7,
 };
@@ -225,6 +244,7 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_nand();
 	ek_add_device_eth();
 	ek_add_device_spi();
+	ek_add_device_mci();
 	at91_add_device_usbh_ohci(&ek_usbh_data);
 	ek_add_led();
 	ek_add_device_i2c();
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 5b17002..354cf08 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -65,8 +65,9 @@ CONFIG_NAND=y
 # CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
-CONFIG_DISK=y
-CONFIG_DISK_WRITE=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_ATMEL=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_LED_TRIGGERS=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/4 v3] at91sam9x5ek: add spi and mci support

[Jean-Christophe PLAGNIOL-VILLARD]

ping
On 12:34 Sat 03 Nov     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> HI,
> 	v3: rebase on the v3 of at91sam9xek i2c support
> 
> 	with this +1 patch serie the support of the at91sam9x5ek is mostly
> 	complete
> 
> 	This will add spi and mci0 support as spi0 and mci0 conflict
> 
> 	We are still missing framebuffer, usb host and device and hardware i2c support
> 	but this wil be added later
> 
> 	This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries
> 
> 	the correct version
> 
> 	this one work but brake the etherent as it mux the 4 cs as gpio and we
> 	use them on the eth0
> 
> The following changes since commit b3a0963d358e14180e9bbde68ab78fdebae071b7:
> 
>   m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)
> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91sam9x5ek_mci_spi
> 
> for you to fetch changes up to dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:
> 
>   at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)
> 
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (4):
>       at91sam9x5: add spi support
>       at91sam9x5ek: add spi support
>       at91sam9x5: add mci support
>       at91sam9x5ek: add mci support
> 
>  arch/arm/boards/at91sam9x5ek/init.c     |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/configs/at91sam9x5ek_defconfig |   10 +++++++---
>  arch/arm/mach-at91/at91sam9x5.c         |    4 ++++
>  arch/arm/mach-at91/at91sam9x5_devices.c |  124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 192 insertions(+), 3 deletions(-)
> 
> Best Regards,
> J.
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox