From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: "U-Boot Version 2 (barebox)" <barebox@lists.infradead.org>
Subject: Re: [PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig
Date: Tue, 20 Nov 2012 09:01:22 +0100 [thread overview]
Message-ID: <20121120080122.GD10369@pengutronix.de> (raw)
In-Reply-To: <alpine.DEB.2.02.1211190956260.13911@oneiric>
On Mon, Nov 19, 2012 at 09:58:45AM -0500, Robert P. J. Day wrote:
>
> Update help info, it's slightly out of date, and a grammatical fix.
> No functional change.
>
> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Applied, thanks
Sascha
>
> ---
>
> are there any other updates that can be made to that help info?
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index cca8394..3f4b452 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -65,15 +65,15 @@ choice
> used to setup SDRAM. The internal ROM code then initializes SDRAM
> using the register/value table, loads the whole barebox image to
> SDRAM and starts it. The internal boot mode is available on newer
> - i.MX processors (i.MX25, i.MX35, i.MX51 and i.MX53). and supports
> - booting from NOR, NAND, MMC/SD and serial ROMs.
> - The external boot mode only supports booting from NAND and NOR. With
> + i.MX processors (i.MX25, i.MX35, i.MX51, i.MX53 and i.MX6), and
> + supports booting from NOR, NAND, MMC/SD and serial ROMs.
> + The external boot mode supports booting only from NAND and NOR. With
> NOR flash the image is just started in NOR flash. With NAND flash
> the NAND controller loads the first 2kbyte from NAND into the NAND
> controllers internal SRAM where it is then started. It's the
> responsibility of these 2kbyte to load the rest of the boot image.
> The external boot mode is supported on older i.MX processors (i.MX1,
> - i.MX21, i.MX25, i.MX27, i.MX21, i.MX35).
> + i.MX21, i.MX25, i.MX27, i.MX31, i.MX35).
>
> config ARCH_IMX_INTERNAL_BOOT
> bool "support internal boot mode"
>
> --
>
> ========================================================================
> Robert P. J. Day Ottawa, Ontario, CANADA
> http://crashcourse.ca
>
> Twitter: http://twitter.com/rpjday
> LinkedIn: http://ca.linkedin.com/in/rpjday
> ========================================================================
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-11-20 8:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 14:58 Robert P. J. Day
2012-11-20 8:01 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121120080122.GD10369@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=rpjday@crashcourse.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox