From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1ThLM6-0007Xt-6N for barebox@lists.infradead.org; Sat, 08 Dec 2012 14:26:17 +0000 Date: Sat, 8 Dec 2012 15:26:09 +0100 From: Sascha Hauer Message-ID: <20121208142609.GJ10369@pengutronix.de> References: <1354949486-12917-1-git-send-email-shc_work@mail.ru> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1354949486-12917-1-git-send-email-shc_work@mail.ru> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 1/8] Cleanup Kconfig files To: Alexander Shiyan Cc: barebox@lists.infradead.org On Sat, Dec 08, 2012 at 10:51:19AM +0400, Alexander Shiyan wrote: > This patch provides a global cleanup barebox Kconfig files. This includes > replacing spaces to tabs, formatting in accordance format, removing > extraneous lines and spaces. No functional changes. > > Signed-off-by: Alexander Shiyan Applied, thanks Sascha > --- > arch/arm/Kconfig | 6 +++--- > arch/arm/cpu/Kconfig | 7 +++---- > arch/arm/mach-at91/Kconfig | 7 ++----- > arch/arm/mach-imx/Kconfig | 29 ++++++++++++++++------------- > arch/arm/mach-mxs/Kconfig | 6 +++--- > arch/arm/mach-netx/Kconfig | 1 - > arch/arm/mach-omap/Kconfig | 17 ++++++++++------- > arch/arm/mach-samsung/Kconfig | 18 +++++++----------- > arch/blackfin/Kconfig | 2 +- > arch/mips/Kconfig | 26 +++++++++++++------------- > arch/nios2/Kconfig | 5 ++--- > arch/openrisc/Kconfig | 2 +- > arch/ppc/mach-mpc5xxx/Kconfig | 1 + > arch/ppc/mach-mpc85xx/Kconfig | 3 ++- > arch/x86/Kconfig | 15 +++++++-------- > arch/x86/boot/Kconfig | 2 +- > arch/x86/mach-i386/Kconfig | 2 +- > commands/Kconfig | 31 +++++++++++++++---------------- > common/Kconfig | 16 ++++++++-------- > crypto/Kconfig | 2 +- > drivers/Kconfig | 2 +- > drivers/ata/Kconfig | 2 +- > drivers/dma/Kconfig | 2 +- > drivers/eeprom/Kconfig | 6 +++--- > drivers/gpio/Kconfig | 2 +- > drivers/i2c/Kconfig | 2 +- > drivers/input/Kconfig | 4 ++-- > drivers/mci/Kconfig | 4 ++-- > drivers/misc/Kconfig | 2 +- > drivers/mtd/Kconfig | 2 +- > drivers/mtd/devices/Kconfig | 8 ++++---- > drivers/mtd/nand/Kconfig | 8 ++++---- > drivers/mtd/ubi/Kconfig | 2 +- > drivers/net/Kconfig | 2 +- > drivers/net/phy/Kconfig | 2 +- > drivers/nor/Kconfig | 6 +++--- > drivers/serial/Kconfig | 4 ++-- > drivers/spi/Kconfig | 2 +- > drivers/usb/Kconfig | 2 +- > drivers/usb/gadget/Kconfig | 2 +- > drivers/video/Kconfig | 2 +- > drivers/watchdog/Kconfig | 2 +- > fs/Kconfig | 2 +- > lib/Kconfig | 6 +++--- > lib/gui/Kconfig | 2 +- > net/Kconfig | 2 +- > 46 files changed, 138 insertions(+), 142 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 3afd885..01fe9de 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -19,7 +19,7 @@ config ARM_LINUX > config HAVE_MACH_ARM_HEAD > bool > > -menu "System Type " > +menu "System Type" > > choice > prompt "ARM system type" > @@ -71,7 +71,7 @@ config ARCH_NOMADIK > select CPU_ARM926T > select CLOCKSOURCE_NOMADIK > help > - Support for the Nomadik platform by ST-Ericsson > + Support for the Nomadik platform by ST-Ericsson > > config ARCH_OMAP > bool "TI OMAP" > @@ -153,7 +153,7 @@ config THUMB2_BAREBOX > > endmenu > > -menu "Arm specific settings " > +menu "Arm specific settings" > > config CMD_ARM_CPUINFO > bool "cpuinfo command" > diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig > index d8a5fb1..86bc174 100644 > --- a/arch/arm/cpu/Kconfig > +++ b/arch/arm/cpu/Kconfig > @@ -4,7 +4,7 @@ config CPU_32 > bool > default y > > -# Select CPU types depending on the architecture selected. This selects > +# Select CPU types depending on the architecture selected. This selects > # which CPUs we support in the kernel image, and the compiler instruction > # optimiser behaviour. > > @@ -27,14 +27,13 @@ config CPU_ARM920T > Say Y if you want support for the ARM920T processor. > Otherwise, say N. > > - > # ARM926T > config CPU_ARM926T > bool > select CPU_32v5 > help > - This is a variant of the ARM920. It has slightly different > - instruction sequences for cache and TLB operations. Curiously, > + This is a variant of the ARM920. It has slightly different > + instruction sequences for cache and TLB operations. Curiously, > there is no documentation on it at the ARM corporate website. > > Say Y if you want support for the ARM926T processor. > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 3de6061..2750dd5 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -116,13 +116,12 @@ config SUPPORT_CALAO_MOB_TNY_MD2 > if ARCH_AT91RM9200 > > choice > - > prompt "AT91RM9200 Board Type" > > config MACH_AT91RM9200EK > bool "Atmel AT91RM9200-EK Evaluation Kit" > - help > select HAVE_AT91_DATAFLASH_CARD > + help > Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. > > > @@ -135,7 +134,6 @@ endif > if ARCH_AT91SAM9260 > > choice > - > prompt "AT91SAM9260 Board Type" > > config MACH_AT91SAM9260EK > @@ -218,7 +216,6 @@ endif > if ARCH_AT91SAM9G20 > > choice > - > prompt "AT91SAM9G20 Board Type" > > config MACH_AT91SAM9G20EK > @@ -390,7 +387,7 @@ config CALAO_MOB_TNY_MD2 > depends on SUPPORT_CALAO_MOB_TNY_MD2 > > config CALAO_MB_QIL_A9260 > - bool "MB-QIL A9260 Motherboard Board support" > + bool "MB-QIL A9260 Motherboard Board support" > depends on MACH_QIL_A9260 > > endif > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 3f4b452..2d65570 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -197,7 +197,6 @@ endchoice > if ARCH_IMX1 > > choice > - > prompt "i.MX1 Board Type" > > config MACH_SCB9328 > @@ -216,7 +215,6 @@ endif > if ARCH_IMX21 > > choice > - > prompt "i.MX21 Board Type" > > config MACH_IMX21ADS > @@ -236,7 +234,6 @@ endif > if ARCH_IMX25 > > choice > - > prompt "i.MX25 Board Type" > > config MACH_EUKREA_CPUIMX25 > @@ -270,7 +267,6 @@ endif > if ARCH_IMX27 > > choice > - > prompt "i.MX27 Board Type" > > config MACH_EUKREA_CPUIMX27 > @@ -329,7 +325,6 @@ endif > if ARCH_IMX31 > > choice > - > prompt "i.MX31 Board Type" > > config MACH_PCM037 > @@ -350,7 +345,6 @@ endif > if ARCH_IMX35 > > choice > - > prompt "i.MX35 Board Type" > > config MACH_EUKREA_CPUIMX35 > @@ -397,7 +391,6 @@ endif > if ARCH_IMX51 > > choice > - > prompt "i.MX51 Board Type" > > config MACH_FREESCALE_MX51_PDK > @@ -442,7 +435,6 @@ endif > if ARCH_IMX53 > > choice > - > prompt "i.MX53 Board Type" > > config MACH_FREESCALE_MX53_LOCO > @@ -471,6 +463,7 @@ config MACH_TX53 > endchoice > > if MACH_TX53 > + > choice > prompt "TX53 board revision" > config TX53_REV_1011 > @@ -478,6 +471,7 @@ config TX53_REV_1011 > config TX53_REV_XX30 > bool "8030 / 1030" > endchoice > + > endif > > endif > @@ -485,7 +479,6 @@ endif > if ARCH_IMX6 > > choice > - > prompt "i.MX6 Board Type" > > config MACH_MX6Q_ARM2 > @@ -500,9 +493,10 @@ endif > > # ---------------------------------------------------------- > > -menu "Board specific settings " > +menu "Board specific settings" > > if MACH_PCM037 > + > choice > prompt "SDRAM Bank0" > config PCM037_SDRAM_BANK0_128MB > @@ -520,9 +514,11 @@ config PCM037_SDRAM_BANK1_128MB > config PCM037_SDRAM_BANK1_256MB > bool "256MB" > endchoice > + > endif > > if MACH_EUKREA_CPUIMX27 > + > choice > prompt "SDRAM Size" > config EUKREA_CPUIMX27_SDRAM_128MB > @@ -530,6 +526,7 @@ config EUKREA_CPUIMX27_SDRAM_128MB > config EUKREA_CPUIMX27_SDRAM_256MB > bool "256 MB" > endchoice > + > choice > prompt "NOR Flash Size" > config EUKREA_CPUIMX27_NOR_32MB > @@ -537,6 +534,7 @@ config EUKREA_CPUIMX27_NOR_32MB > config EUKREA_CPUIMX27_NOR_64MB > bool "> 32 MB" > endchoice > + > choice > prompt "Quad UART Port" > depends on DRIVER_SERIAL_NS16550 > @@ -549,8 +547,11 @@ config EUKREA_CPUIMX27_QUART3 > config EUKREA_CPUIMX27_QUART4 > bool "Q4" > endchoice > + > endif > + > if MACH_FREESCALE_MX25_3STACK > + > choice > prompt "SDRAM Type" > config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2 > @@ -558,16 +559,18 @@ config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2 > config FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR > bool "128 MB (mDDR)" > endchoice > + > endif > + > endmenu > > -menu "i.MX specific settings " > +menu "i.MX specific settings" > > config IMX_IIM > tristate "IIM fusebox device" > depends on !ARCH_IMX21 && !ARCH_IMX21 > help > - Device driver for the IC Identification Module (IIM) fusebox. Use the > + Device driver for the IC Identification Module (IIM) fusebox. Use the > regular md/mw commands to program and read the fusebox. > > Fuses are grouped in "rows", 8 bits per row. When using md/mw commands, > @@ -588,7 +591,7 @@ config IMX_IIM_FUSE_BLOW > > Before being actually able to blow the fuses, you need to explicitely > enable it: > - imx_iim0.permanent_write_enable=1 > + imx_iim0.permanent_write_enable=1 > > endmenu > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index ff295f1..853d81a 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -84,7 +84,7 @@ endchoice > > endif > > -menu "i.MX specific settings " > +menu "i.MX specific settings" > > config MXS_OCOTP > tristate "OCOTP device" > @@ -105,7 +105,7 @@ config MXS_OCOTP_WRITABLE > > Before being actually able to blow the bits, you need to explicitely > enable writing: > - ocotp0.permanent_write_enable=1 > + ocotp0.permanent_write_enable=1 > > config MXS_CMD_BCB > depends on NAND_MXS > @@ -117,7 +117,7 @@ config MXS_CMD_BCB > > endmenu > > -menu "Board specific settings " > +menu "Board specific settings" > > if MACH_TX28 > > diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig > index 8e83417..b9e3457 100644 > --- a/arch/arm/mach-netx/Kconfig > +++ b/arch/arm/mach-netx/Kconfig > @@ -40,7 +40,6 @@ config NETX_COOKIE > default 16 if MACH_NXHX > > choice > - > prompt "Netx Board Type" > > config MACH_NXDB500 > diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig > index 81f6127..e4103e2 100644 > --- a/arch/arm/mach-omap/Kconfig > +++ b/arch/arm/mach-omap/Kconfig > @@ -12,7 +12,7 @@ > # > # This program is distributed in the hope that it will be useful, > # but WITHOUT ANY WARRANTY; without even the implied warranty of > -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > # GNU General Public License for more details. > # > > @@ -59,7 +59,7 @@ config OMAP3_CLOCK_CONFIG > config OMAP_GPMC > prompt "Support for GPMC configuration" > bool > - depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) > + depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) > default y > help > Enable this if you use Texas Instrument's General purpose Memory > @@ -115,14 +115,14 @@ config MACH_BEAGLE > select HAVE_NOSHELL > select HAVE_DEFAULT_ENVIRONMENT_NEW > depends on ARCH_OMAP3 > - help > + help > Say Y here if you are using Beagle Board > > config MACH_OMAP3EVM > bool "Texas Instrument's OMAP3 EVM" > select HAVE_NOSHELL > depends on ARCH_OMAP3 > - help > + help > Say Y here if you are using OMAP3EVM > > config MACH_PANDA > @@ -155,7 +155,7 @@ config MACH_PCAAL1 > bool "Phytec phyCARD-A-L1" > select HAVE_NOSHELL > depends on ARCH_OMAP3 > - help > + help > Say Y here if you are using a phyCARD-A-L1 PCA-A-L1 > > config MACH_PCAAXL2 > @@ -169,7 +169,8 @@ config MACH_PCAAXL2 > endchoice > > if MACH_OMAP3EVM > - choice > + > +choice > prompt "Select UART" > > config OMAP3EVM_UART1 > @@ -183,7 +184,9 @@ if MACH_OMAP3EVM > depends on MACH_OMAP3EVM > help > Say Y here if you would like to use UART3 as console. > - endchoice > + > +endchoice > + > endif > > config MACH_OMAP_ADVANCED_MUX > diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig > index 3a4d910..80575cb 100644 > --- a/arch/arm/mach-samsung/Kconfig > +++ b/arch/arm/mach-samsung/Kconfig > @@ -13,12 +13,12 @@ config ARCH_TEXT_BASE > default 0x23e00000 if MACH_TINY210 > > config BOARDINFO > - default "Mini 2440" if MACH_MINI2440 > - default "Mini 6410" if MACH_MINI6410 > - default "Tiny 6410" if MACH_TINY6410 > + default "Mini 2440" if MACH_MINI2440 > + default "Mini 6410" if MACH_MINI6410 > + default "Tiny 6410" if MACH_TINY6410 > default "Digi A9M2440" if MACH_A9M2440 > default "Digi A9M2410" if MACH_A9M2410 > - default "Tiny 210" if MACH_TINY210 > + default "Tiny 210" if MACH_TINY210 > > config ARCH_BAREBOX_MAX_BARE_INIT_SIZE > hex > @@ -35,7 +35,6 @@ config CPU_S3C2440 > bool > > choice > - > prompt "S3C24xx Board Type" > > config MACH_A9M2410 > @@ -71,7 +70,7 @@ config MACH_MINI2440 > > endchoice > > -menu "Board specific settings " > +menu "Board specific settings" > > choice > prompt "A9M2440 baseboard" > @@ -98,7 +97,6 @@ config CPU_S3C6410 > bool > > choice > - > prompt "S3C64xx Board Type" > > config MACH_MINI6410 > @@ -118,7 +116,7 @@ config MACH_TINY6410 > > endchoice > > -menu "Board specific settings " > +menu "Board specific settings" > > source arch/arm/boards/friendlyarm-tiny6410/Kconfig > > @@ -135,7 +133,6 @@ config CPU_S5PV210 > bool > > choice > - > prompt "S5PCxx board type" > > config MACH_TINY210 > @@ -149,8 +146,7 @@ endchoice > > endif > > - > -menu "S3C Features " > +menu "S3C Features" > > config S3C_LOWLEVEL_INIT > bool > diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig > index 1c58ba8..5d8a2e2 100644 > --- a/arch/blackfin/Kconfig > +++ b/arch/blackfin/Kconfig > @@ -29,7 +29,7 @@ config MACH_IPE337 > > endchoice > > -choice > +choice > prompt "Select your board options" > depends on MACH_IPE337 > default MACH_IPE337_V2 > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig > index 7a1eeac..947edcf 100644 > --- a/arch/mips/Kconfig > +++ b/arch/mips/Kconfig > @@ -62,10 +62,11 @@ source arch/mips/mach-xburst/Kconfig > endmenu > > # > -# Endianess selection. Sufficiently obscure so many users don't know what to > -# answer,so we try hard to limit the available choices. Also the use of a > +# Endianess selection. Sufficiently obscure so many users don't know what to > +# answer,so we try hard to limit the available choices. Also the use of a > # choice statement should be more obvious to the user. > # > + > choice > prompt "Endianess selection" > help > @@ -98,8 +99,8 @@ config CPU_MIPS32_R1 > select CPU_SUPPORTS_32BIT_KERNEL > help > Choose this option to build a barebox for release 1 or later of the > - MIPS32 architecture. Most modern embedded systems with a 32-bit > - MIPS processor are based on a MIPS32 processor. If you know the > + MIPS32 architecture. Most modern embedded systems with a 32-bit > + MIPS processor are based on a MIPS32 processor. If you know the > specific type of processor in your system, choose those that one > otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. > Release 2 of the MIPS32 architecture is available since several > @@ -113,8 +114,8 @@ config CPU_MIPS32_R2 > select CPU_SUPPORTS_32BIT_KERNEL > help > Choose this option to build a barebox for release 2 or later of the > - MIPS32 architecture. Most modern embedded systems with a 32-bit > - MIPS processor are based on a MIPS32 processor. If you know the > + MIPS32 architecture. Most modern embedded systems with a 32-bit > + MIPS processor are based on a MIPS32 processor. If you know the > specific type of processor in your system, choose those that one > otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. > > @@ -125,8 +126,8 @@ config CPU_MIPS64_R1 > select CPU_SUPPORTS_64BIT_KERNEL > help > Choose this option to build a barebox for release 1 or later of the > - MIPS64 architecture. Many modern embedded systems with a 64-bit > - MIPS processor are based on a MIPS64 processor. If you know the > + MIPS64 architecture. Many modern embedded systems with a 64-bit > + MIPS processor are based on a MIPS64 processor. If you know the > specific type of processor in your system, choose those that one > otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. > Release 2 of the MIPS64 architecture is available since several > @@ -141,14 +142,13 @@ config CPU_MIPS64_R2 > select CPU_SUPPORTS_64BIT_KERNEL > help > Choose this option to build a barebox for release 2 or later of the > - MIPS64 architecture. Many modern embedded systems with a 64-bit > - MIPS processor are based on a MIPS64 processor. If you know the > + MIPS64 architecture. Many modern embedded systems with a 64-bit > + MIPS processor are based on a MIPS64 processor. If you know the > specific type of processor in your system, choose those that one > otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. > > endchoice > > - > config SYS_HAS_CPU_MIPS32_R1 > bool > > @@ -199,7 +199,7 @@ choice > help > You should only select this option if you have a workload that > actually benefits from 64-bit processing or if your machine has > - large memory. You will only be presented a single option in this > + large memory. You will only be presented a single option in this > menu if your system does not support both 32-bit and 64-bit modes. > > config 32BIT > @@ -216,7 +216,7 @@ config 64BIT > > endchoice > > -menu "MIPS specific settings " > +menu "MIPS specific settings" > > config CMD_MIPS_CPUINFO > bool "cpuinfo command" > diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig > index e1af0c0..c49f6e9 100644 > --- a/arch/nios2/Kconfig > +++ b/arch/nios2/Kconfig > @@ -16,13 +16,12 @@ choice > prompt "Select your board" > > config GENERIC > - bool "Generic " > + bool "Generic" > select NIOS2 > > - > endchoice > > -menu "Board configuration " > +menu "Board configuration" > > config EARLY_PRINTF > default n > diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig > index bcfd67f..47ee3fe 100644 > --- a/arch/openrisc/Kconfig > +++ b/arch/openrisc/Kconfig > @@ -16,7 +16,7 @@ choice > prompt "Select your board" > > config GENERIC > - bool "Generic " > + bool "Generic" > select OPENRISC > > endchoice > diff --git a/arch/ppc/mach-mpc5xxx/Kconfig b/arch/ppc/mach-mpc5xxx/Kconfig > index db4f391..db001d7 100644 > --- a/arch/ppc/mach-mpc5xxx/Kconfig > +++ b/arch/ppc/mach-mpc5xxx/Kconfig > @@ -50,4 +50,5 @@ config MACH_PHYCORE_MPC5200B_TINY_REV > old board you should set this option to 1 > > endmenu > + > endif > diff --git a/arch/ppc/mach-mpc85xx/Kconfig b/arch/ppc/mach-mpc85xx/Kconfig > index b2af05e..8cde1bd 100644 > --- a/arch/ppc/mach-mpc85xx/Kconfig > +++ b/arch/ppc/mach-mpc85xx/Kconfig > @@ -17,9 +17,10 @@ choice > config P2020RDB > bool "P2020RDB" > help > - Say Y here if you are using the Freescale P2020RDB > + Say Y here if you are using the Freescale P2020RDB > > endchoice > + > endif > > if P2020RDB > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 711bbfe..777604f 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -40,19 +40,18 @@ choice > prompt "Bring up type" > > config X86_BIOS_BRINGUP > - prompt "16 bit BIOS" > - bool > + bool "16 bit BIOS" > help > - Barebox will act as a BIOS based bootloader. This includes > - some 16 bit real mode code and some restrictions everyone knows > - from BIOS based systems. > + Barebox will act as a BIOS based bootloader. This includes > + some 16 bit real mode code and some restrictions everyone knows > + from BIOS based systems. > > config X86_NATIVE_BRINGUP > bool "native" > help > - Barebox will act as a native bootloader. This includes all the > - required initialization needed to bring up a piece of hardware. > - Note: Not implemented yet > + Barebox will act as a native bootloader. This includes all the > + required initialization needed to bring up a piece of hardware. > + Note: Not implemented yet > > endchoice > > diff --git a/arch/x86/boot/Kconfig b/arch/x86/boot/Kconfig > index cdb82e4..8dba00d 100644 > --- a/arch/x86/boot/Kconfig > +++ b/arch/x86/boot/Kconfig > @@ -1,6 +1,6 @@ > if X86_BIOS_BRINGUP > > -menu "BIOS boot source " > +menu "BIOS boot source" > > config X86_HDBOOT > bool "HD boot" > diff --git a/arch/x86/mach-i386/Kconfig b/arch/x86/mach-i386/Kconfig > index 11f6aa6..cb12b9c 100644 > --- a/arch/x86/mach-i386/Kconfig > +++ b/arch/x86/mach-i386/Kconfig > @@ -1,5 +1,5 @@ > > -menu "Board specific settings " > +menu "Board specific settings" > > if X86_BOOTLOADER > > diff --git a/commands/Kconfig b/commands/Kconfig > index ac9b797..75ebfb8 100644 > --- a/commands/Kconfig > +++ b/commands/Kconfig > @@ -12,9 +12,9 @@ config HAS_POWEROFF > > if COMMAND_SUPPORT > > -menu "commands " > +menu "commands" > > -menu "scripting " > +menu "scripting" > > config CMD_EDIT > tristate > @@ -107,7 +107,7 @@ endif > > config CMD_TIME > bool "time" > - help > + help > Just like the unix time command this command allows to measure the > execution time of a command. Note: barebox does not use interrupts, > so the system timer can overrun during the execution of the command > @@ -130,7 +130,7 @@ config CMD_GLOBAL > > endmenu > > -menu "file commands " > +menu "file commands" > > config CMD_LS > tristate > @@ -237,7 +237,7 @@ config CMD_FILETYPE > > endmenu > > -menu "console " > +menu "console" > > config CMD_CLEAR > tristate > @@ -257,7 +257,7 @@ config CMD_ECHO_E > > endmenu > > -menu "memory " > +menu "memory" > > config CMD_LOADB > select CRC16 > @@ -306,8 +306,8 @@ config CMD_CRC_CMP > prompt "compare 2 files crc" > > config CMD_DIGEST > - tristate > - select DIGEST > + tristate > + select DIGEST > > config CMD_MD5SUM > tristate > @@ -335,7 +335,7 @@ config CMD_SHA224SUM > > endmenu > > -menu "flash " > +menu "flash" > > config CMD_FLASH > tristate > @@ -349,8 +349,7 @@ config CMD_UBI > > endmenu > > - > -menu "booting " > +menu "booting" > > config CMD_BOOTM > tristate > @@ -424,8 +423,8 @@ config CMD_BOOTU > depends on ARM > prompt "bootu" > help > - compile in the 'bootu' command to start raw (uncompressed) > - Linux images > + compile in the 'bootu' command to start raw (uncompressed) > + Linux images > > config FLEXIBLE_BOOTARGS > bool > @@ -479,7 +478,7 @@ config CMD_OFTREE_PROBE > > endmenu > > -menu "testing " > +menu "testing" > > config CMD_NANDTEST > tristate > @@ -500,7 +499,7 @@ config CMD_MTEST_ALTERNATIVE > > endmenu > > -menu "video command " > +menu "video command" > > if VIDEO > > @@ -659,7 +658,7 @@ config CMD_CLK > menuconfig CMD_WD > bool > depends on WATCHDOG > - prompt "wd command " > + prompt "wd command" > help > The 'wd' command which allows to start, stop and trigger the onboard > watchdog. > diff --git a/common/Kconfig b/common/Kconfig > index d60db80..4209404 100644 > --- a/common/Kconfig > +++ b/common/Kconfig > @@ -61,7 +61,7 @@ config STDDEV > config BAREBOX_UPDATE > bool > > -menu "General Settings " > +menu "General Settings" > > config LOCALVERSION > string "Local version - append to the version string" > @@ -69,7 +69,7 @@ config LOCALVERSION > Append an extra string to the end of your version string. > The string you set here will be appended after the contents of > any files with a filename matching localversion* in your > - object and source tree, in that order. Your total string can > + object and source tree, in that order. Your total string can > be a maximum of 64 characters. > > config LOCALVERSION_AUTO > @@ -81,7 +81,7 @@ config LOCALVERSION_AUTO > top of tree revision. > > A string of the format -gxxxxxxxx will be added to the localversion > - if a git-based tree is found. The string generated by this will be > + if a git-based tree is found. The string generated by this will be > appended after any matching localversion* files, and after the value > set in CONFIG_LOCALVERSION. > > @@ -106,7 +106,7 @@ config MEMINFO > config ENVIRONMENT_VARIABLES > bool "environment variables support" > > -menu "memory layout " > +menu "memory layout" > > config HAVE_PBL_IMAGE > bool > @@ -196,7 +196,7 @@ config MEMORY_LAYOUT_DEFAULT > bool "use default memory layout" > help > select this option to use bareboxs standard memory layout: > - > + > stack > ----- > malloc heap > @@ -409,8 +409,8 @@ config MENU > prompt "Menu Framework" > depends on PROCESS_ESCAPE_SEQUENCE > help > - a menu framework that allow us to create list menu to simplify > - barebox and make it more user-frendly > + a menu framework that allow us to create list menu to simplify > + barebox and make it more user-frendly > > config PASSWORD > bool > @@ -635,7 +635,7 @@ config RESET_SOURCE > > endmenu > > -menu "Debugging " > +menu "Debugging" > > config DEBUG_INFO > bool > diff --git a/crypto/Kconfig b/crypto/Kconfig > index a6fc1b8..4bd8dcf 100644 > --- a/crypto/Kconfig > +++ b/crypto/Kconfig > @@ -8,7 +8,7 @@ config CRC7 > bool > > menuconfig DIGEST > - bool "Digest " > + bool "Digest" > > if DIGEST > > diff --git a/drivers/Kconfig b/drivers/Kconfig > index f6446e8..988ec9e 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -1,4 +1,4 @@ > -menu "Drivers " > +menu "Drivers" > > source "drivers/serial/Kconfig" > source "drivers/net/Kconfig" > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index fe6f5e6..2e80c3e 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -2,7 +2,7 @@ menuconfig DISK > select BLOCK > select PARTITION > select PARTITION_DISK > - bool "Disk support " > + bool "Disk support" > help > Add support for disk like drives like harddisks, CDROMs, SD cards and > CF cards. > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig > index ec6c894..a30fa37 100644 > --- a/drivers/dma/Kconfig > +++ b/drivers/dma/Kconfig > @@ -4,5 +4,5 @@ config MXS_APBH_DMA > tristate "MXS APBH DMA ENGINE" > depends on ARCH_IMX23 || ARCH_IMX28 > help > - Experimental! > + Experimental! > endmenu > diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig > index ce9cfe7..0e36c82 100644 > --- a/drivers/eeprom/Kconfig > +++ b/drivers/eeprom/Kconfig > @@ -14,11 +14,11 @@ config EEPROM_AT24 > help > Enable this driver to get read/write support to most I2C EEPROMs, > after you configure the driver to know about each EEPROM on > - your target board. Use these generic chip names, instead of > + your target board. Use these generic chip names, instead of > vendor-specific ones like at24c64 or 24lc02: > > - 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, > - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 > + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, > + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 > > Unless you like data loss puzzles, always be sure that any chip > you configure as a 24c32 (32 kbit) or larger is NOT really a > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index e8eeb6d..89be684 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -4,7 +4,7 @@ config GPIOLIB > > if GPIOLIB > > -menu "GPIO " > +menu "GPIO" > > config GPIO_BCM2835 > bool "GPIO support for BCM2835" > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig > index 038e2ee..0c6aec3 100644 > --- a/drivers/i2c/Kconfig > +++ b/drivers/i2c/Kconfig > @@ -1,5 +1,5 @@ > menuconfig I2C > - bool "I2C drivers " > + bool "I2C drivers" > > if I2C > > diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig > index 846483c..a6f1f47 100644 > --- a/drivers/input/Kconfig > +++ b/drivers/input/Kconfig > @@ -13,7 +13,7 @@ config KEYBOARD_GPIO > to GPIO pins of various CPUs (and some other chips). > > Say Y here if your device has buttons connected > - directly to such GPIO pins. Your board-specific > + directly to such GPIO pins. Your board-specific > setup logic must also provide a platform device, > with configuration data saying which GPIOs are used. > > @@ -26,7 +26,7 @@ config KEYBOARD_IMX_KEYPAD > to the IMX keypad matrix. > > Say Y here if your device has buttons connected > - to the IMX keypad matrix. Your board-specific > + to the IMX keypad matrix. Your board-specific > setup logic must also provide a 'matrix_keymap_data' structure, > defining the used keys. > > diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig > index 5c0ca4d..6876117 100644 > --- a/drivers/mci/Kconfig > +++ b/drivers/mci/Kconfig > @@ -1,5 +1,5 @@ > menuconfig MCI > - bool "MCI drivers " > + bool "MCI drivers" > select DISK > help > Add support for MCI drivers, used to handle MMC and SD cards > @@ -92,7 +92,7 @@ config MCI_SPI > depends on SPI > help > Some systems access MMC/SD/SDIO cards using a SPI controller > - instead of using a "native" MMC/SD/SDIO controller. This has a > + instead of using a "native" MMC/SD/SDIO controller. This has a > disadvantage of being relatively high overhead, but a compensating > advantage of working on many systems without dedicated MMC/SD/SDIO > controllers. > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index 699046b..606490b 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -3,7 +3,7 @@ > # > > menuconfig MISC_DEVICES > - bool "Misc devices " > + bool "Misc devices" > help > Add support for misc strange devices > > diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig > index 0a4ca31..9450f5d 100644 > --- a/drivers/mtd/Kconfig > +++ b/drivers/mtd/Kconfig > @@ -1,5 +1,5 @@ > menuconfig MTD > - bool "Memory Technology Device (MTD) support" > + bool "Memory Technology Device (MTD) support" > > if MTD > > diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig > index 679ea80..61278a2 100644 > --- a/drivers/mtd/devices/Kconfig > +++ b/drivers/mtd/devices/Kconfig > @@ -15,7 +15,7 @@ config MTD_DATAFLASH_WRITE_VERIFY > help > This adds an extra check when data is written to the flash. > It may help if you are verifying chip setup (timings etc) on > - your board. There is a rare possibility that even though the > + your board. There is a rare possibility that even though the > device thinks the write was successful, a bit could have been > flipped accidentally due to device wear or something else. > > @@ -24,9 +24,9 @@ config MTD_M25P80 > depends on SPI > help > This enables access to most modern SPI flash chips, used for > - program and data storage. Series supported include Atmel AT26DF, > - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips > - are supported as well. See the driver source for the current list, > + program and data storage. Series supported include Atmel AT26DF, > + Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips > + are supported as well. See the driver source for the current list, > or to add other chips. > > Note that the original DataFlash chips (AT45 series, not AT26DF), > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index d96ef9e..aa3ea34 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -1,5 +1,5 @@ > menuconfig NAND > - bool "NAND support " > + bool "NAND support" > select MTD_NAND_IDS > help > This enables support for accessing all type of NAND flash > @@ -63,8 +63,8 @@ config NAND_OMAP_GPMC > tristate "NAND Flash Support for GPMC based OMAP platforms" > depends on OMAP_GPMC > help > - Support for NAND flash using GPMC. GPMC is a common memory > - interface found on Texas Instrument's OMAP platforms > + Support for NAND flash using GPMC. GPMC is a common memory > + interface found on Texas Instrument's OMAP platforms > > config NAND_ATMEL > bool > @@ -77,7 +77,7 @@ config NAND_ATMEL_PMECC > depends on NAND_ATMEL > select NAND_ECC_HW > help > - Support for PMECC present on the SoC sam9x5 and sam9n12 > + Support for PMECC present on the SoC sam9x5 and sam9n12 > > config NAND_S3C24XX > bool > diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig > index 2cf474a..6df954c 100644 > --- a/drivers/mtd/ubi/Kconfig > +++ b/drivers/mtd/ubi/Kconfig > @@ -1,5 +1,5 @@ > config UBI > - bool "UBI support " > + bool "UBI support" > select PARTITION_NEED_MTD > select CRC32 > help > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index b3e5a83..43d5984 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -22,7 +22,7 @@ config ARCH_HAS_FEC_IMX > config PHYLIB > bool > > -menu "Network drivers " > +menu "Network drivers" > depends on NET > > source "drivers/net/phy/Kconfig" > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig > index 616b539..9250305 100644 > --- a/drivers/net/phy/Kconfig > +++ b/drivers/net/phy/Kconfig > @@ -2,7 +2,7 @@ > # PHY Layer Configuration > # > > -menu "phylib " > +menu "phylib" > > if PHYLIB > > diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig > index a3c0223..c8ce24f 100644 > --- a/drivers/nor/Kconfig > +++ b/drivers/nor/Kconfig > @@ -1,7 +1,7 @@ > -menu "flash drivers " > +menu "flash drivers" > > menuconfig DRIVER_CFI > - bool "CFI " > + bool "CFI" > help > If you have NOR Flash devices connected to your system and wish > to use them say yes here. > @@ -19,7 +19,7 @@ config DRIVER_CFI_AMD > bool "support AMD flash chips" > > config DRIVER_CFI_BANK_WIDTH_1 > - bool "Support 8-bit buswidth" > + bool "Support 8-bit buswidth" > depends on DRIVER_CFI > default y > help > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index 32b033f..a8be9cd 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -1,4 +1,4 @@ > -menu "serial drivers " > +menu "serial drivers" > > config DRIVER_SERIAL_ARM_DCC > depends on ARM > @@ -8,7 +8,7 @@ config SERIAL_AMBA_PL011 > bool "ARM AMBA PL011 serial port support" > depends on ARM_AMBA > help > - This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have > + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have > an Integrator/PP2, Integrator/CP or Versatile platform, say Y here. > > If unsure, say N. > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index b003290..10b8fea 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -1,4 +1,4 @@ > -menu "SPI drivers " > +menu "SPI drivers" > > config SPI > bool "Enable SPI driver support" > diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig > index 254b196..acdb4c6 100644 > --- a/drivers/usb/Kconfig > +++ b/drivers/usb/Kconfig > @@ -1,5 +1,5 @@ > menuconfig USB > - bool "USB support " > + bool "USB support" > > if USB > > diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig > index 465121c..6501d42 100644 > --- a/drivers/usb/gadget/Kconfig > +++ b/drivers/usb/gadget/Kconfig > @@ -1,6 +1,6 @@ > menuconfig USB_GADGET > depends on USB_HAVE_GADGET_DRIVER > - bool "USB gadget support " > + bool "USB gadget support" > > config USB_HAVE_GADGET_DRIVER > bool > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 4aa92c5..f09ffdf 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -1,5 +1,5 @@ > menuconfig VIDEO > - bool "Video drivers " > + bool "Video drivers" > help > Add support for framebuffer and splash screens > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index ba33617..2e2900c 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -3,7 +3,7 @@ config WATCHDOG_IMX_RESET_SOURCE > bool > > menuconfig WATCHDOG > - bool "Watchdog support " > + bool "Watchdog support" > help > Many platforms support a watchdog to keep track of a working machine. > This framework provides routines to handle these watchdogs. > diff --git a/fs/Kconfig b/fs/Kconfig > index 0ab69d7..c26c3c4 100644 > --- a/fs/Kconfig > +++ b/fs/Kconfig > @@ -1,5 +1,5 @@ > > -menu "Filesystem support " > +menu "Filesystem support" > > config FS > bool > diff --git a/lib/Kconfig b/lib/Kconfig > index 13ecab0..5966386 100644 > --- a/lib/Kconfig > +++ b/lib/Kconfig > @@ -1,4 +1,4 @@ > -menu "Library routines " > +menu "Library routines" > config PARAMETER > bool > > @@ -30,10 +30,10 @@ config OFTREE > bool > > config BCH > - bool > + bool > > config BITREV > - bool > + bool > > config QSORT > bool > diff --git a/lib/gui/Kconfig b/lib/gui/Kconfig > index 8fd12fb..da71bae 100644 > --- a/lib/gui/Kconfig > +++ b/lib/gui/Kconfig > @@ -1,4 +1,4 @@ > -menu "Library gui routines " > +menu "Library gui routines" > > config IMAGE_RENDERER > bool > diff --git a/net/Kconfig b/net/Kconfig > index 00fffb3..acd92ff 100644 > --- a/net/Kconfig > +++ b/net/Kconfig > @@ -1,5 +1,5 @@ > menuconfig NET > - bool "Networking Support " > + bool "Networking Support" > > if NET > > -- > 1.7.8.6 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox