From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 00/13] at91: cleanup and switch core driver to device/driver
Date: Wed, 2 Jan 2013 11:07:14 +0100 [thread overview]
Message-ID: <20130102100714.GC26326@pengutronix.de> (raw)
In-Reply-To: <20121228191327.GC7216@game.jcrosoft.org>
On Fri, Dec 28, 2012 at 08:13:27PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> HI,
>
> cleanup base addresses and start to drop AT91_BASE_SYS to allow
> multiple arch at a time
>
> switch code drivers to device/drivers
>
> detect soc a at run time
>
> The following changes since commit adbdc7cd87971b126838950e2dc5eaedfff943d7:
>
> spi: atmel: request cs pin via gpiolib (2012-12-29 00:35:08 +0800)
>
> are available in the git repository at:
>
> git://git.jcrosoft.org/barebox.git delivery/at91_cleanup
>
Applied, thanks
Sascha
> for you to fetch changes up to 9f7f67ca887b26a4488edf5fa171a78e142e0a5b:
>
> at91: drop AT91_BASE_PIOx for soc specific one for none boot code (2012-12-29 01:37:47 +0800)
>
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (13):
> at91: factorise dbgu address
> at91: enable clock via clock framework
> at91: factoryse PMC address as it's the same on every soc
> at91: pmc: drop AT91_BASE_SYS
> at91: introduce Kconfig to select the dbgu for lowlevel debug
> at91: sync with the kernel address base
> at91: at91sam9: provide its own clkdev for pit
> at91: PIT: switch to platfrom_driver
> at91: autodetect the soc one time at postcore_initcall
> at91: SMC: switch to platfrom_driver
> at91: wdt: drop AT91_SYS_BASE
> at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER
> at91: drop AT91_BASE_PIOx for soc specific one for none boot code
>
> arch/arm/boards/at91sam9260ek/init.c | 5 +-
> arch/arm/boards/at91sam9261ek/init.c | 5 +-
> arch/arm/boards/at91sam9263ek/init.c | 3 +-
> arch/arm/boards/at91sam9m10g45ek/init.c | 3 +-
> arch/arm/boards/at91sam9n12ek/init.c | 5 +-
> arch/arm/boards/at91sam9x5ek/init.c | 3 +-
> arch/arm/boards/dss11/init.c | 9 ++-
> arch/arm/boards/pm9261/init.c | 5 +-
> arch/arm/boards/pm9263/init.c | 3 +-
> arch/arm/boards/pm9g45/init.c | 3 +-
> arch/arm/boards/qil-a9260/init.c | 3 +-
> arch/arm/boards/tny-a926x/init.c | 5 +-
> arch/arm/boards/usb-a926x/init.c | 5 +-
> arch/arm/mach-at91/Kconfig | 114 ++++++++++++++++++++++------
> arch/arm/mach-at91/Makefile | 21 +++---
> arch/arm/mach-at91/at91rm9200.c | 25 +++---
> arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 18 +++--
> arch/arm/mach-at91/at91sam9260.c | 24 +++---
> arch/arm/mach-at91/at91sam9261.c | 24 +++---
> arch/arm/mach-at91/at91sam9263.c | 29 +++----
> arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 28 +++----
> arch/arm/mach-at91/at91sam926x_time.c | 68 +++++++++++++----
> arch/arm/mach-at91/at91sam9g45.c | 29 ++++---
> arch/arm/mach-at91/at91sam9n12.c | 26 +++----
> arch/arm/mach-at91/at91sam9x5.c | 26 +++----
> arch/arm/mach-at91/clock.c | 50 ++++++------
> arch/arm/mach-at91/generic.h | 13 ++++
> arch/arm/mach-at91/include/mach/at91_dbgu.h | 26 +++----
> arch/arm/mach-at91/include/mach/at91_pit.h | 8 +-
> arch/arm/mach-at91/include/mach/at91_pmc.h | 48 ++++++------
> arch/arm/mach-at91/include/mach/at91_wdt.h | 6 +-
> arch/arm/mach-at91/include/mach/at91rm9200.h | 22 ++++--
> arch/arm/mach-at91/include/mach/at91sam9260.h | 37 ++++++---
> arch/arm/mach-at91/include/mach/at91sam9261.h | 34 ++++++---
> arch/arm/mach-at91/include/mach/at91sam9263.h | 52 ++++++++-----
> arch/arm/mach-at91/include/mach/at91sam9_smc.h | 50 +++++++++---
> arch/arm/mach-at91/include/mach/at91sam9g45.h | 44 +++++++----
> arch/arm/mach-at91/include/mach/at91sam9n12.h | 43 +++++++----
> arch/arm/mach-at91/include/mach/at91sam9x5.h | 43 +++++++----
> arch/arm/mach-at91/include/mach/cpu.h | 190 ++++++++++++++++++++++------------------------
> arch/arm/mach-at91/include/mach/debug_ll.h | 6 +-
> arch/arm/mach-at91/include/mach/hardware.h | 8 ++
> arch/arm/mach-at91/include/mach/sam9_smc.h | 33 --------
> arch/arm/mach-at91/sam9_smc.c | 146 +++++++++++++++++++++++++++++------
> arch/arm/mach-at91/setup.c | 226 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-at91/soc.h | 66 ++++++++++++++++
> 46 files changed, 1127 insertions(+), 513 deletions(-)
> delete mode 100644 arch/arm/mach-at91/include/mach/sam9_smc.h
> create mode 100644 arch/arm/mach-at91/setup.c
> create mode 100644 arch/arm/mach-at91/soc.h
>
> Best Regards,
> J.
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-01-02 10:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-28 19:13 Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 01/13] at91: factorise dbgu address Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 02/13] at91: enable clock via clock framework Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:58 ` Sascha Hauer
2012-12-28 19:16 ` [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 11:00 ` Sascha Hauer
2012-12-28 19:16 ` [PATCH 04/13] at91: pmc: drop AT91_BASE_SYS Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 05/13] at91: introduce Kconfig to select the dbgu for lowlevel debug Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 06/13] at91: sync with the kernel address base Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 07/13] at91: at91sam9: provide its own clkdev for pit Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 08/13] at91: PIT: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59 ` Sascha Hauer
2012-12-28 19:16 ` [PATCH 09/13] at91: autodetect the soc one time at postcore_initcall Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 10/13] at91: SMC: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59 ` Sascha Hauer
2012-12-28 19:16 ` [PATCH 11/13] at91: wdt: drop AT91_SYS_BASE Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 12/13] at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 13/13] at91: drop AT91_BASE_PIOx for soc specific one for none boot code Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:07 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130102100714.GC26326@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox