mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc
Date: Wed, 2 Jan 2013 12:00:11 +0100	[thread overview]
Message-ID: <20130102110011.GV24458@pengutronix.de> (raw)
In-Reply-To: <1356722174-22598-3-git-send-email-plagnioj@jcrosoft.com>

subject: s/factoryse/factorise/

Sascha

On Fri, Dec 28, 2012 at 08:16:04PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/include/mach/at91rm9200.h  |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9260.h |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9261.h |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9263.h |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9g45.h |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9n12.h |    1 -
>  arch/arm/mach-at91/include/mach/at91sam9x5.h  |    1 -
>  arch/arm/mach-at91/include/mach/hardware.h    |    2 ++
>  8 files changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
> index 2850f0d..69ebaab 100644
> --- a/arch/arm/mach-at91/include/mach/at91rm9200.h
> +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
> @@ -84,7 +84,6 @@
>   */
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
>  #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
>  #define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
>  #define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
>  #define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
> index be07e57..e1ec7e5 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9260.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
> @@ -87,7 +87,6 @@
>  #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
>  #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
> index d51673e..17a3949 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9261.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
> @@ -73,7 +73,6 @@
>  #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
>  #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
> index c8374a7..c887b38 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9263.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
> @@ -87,7 +87,6 @@
>  #define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
>  #define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
> index 10f3170..1c98491 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
> @@ -97,7 +97,6 @@
>  #define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
>  #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> index dcbdb1b..afe0034 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9n12.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> @@ -93,7 +93,6 @@
>  #define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffe00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffe10 - AT91_BASE_SYS)
>  #define AT91_PIT	(0xfffffe30 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
> index 2240710..ca778fb 100644
> --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
> +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
> @@ -100,7 +100,6 @@
>  #define AT91_DMA1	(0xffffee00 - AT91_BASE_SYS)
>  #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
>  #define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
> -#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
>  #define AT91_RSTC	(0xfffffe00 - AT91_BASE_SYS)
>  #define AT91_SHDWC	(0xfffffe10 - AT91_BASE_SYS)
>  #define AT91_PIT	(0xfffffe30 - AT91_BASE_SYS)
> diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
> index 64efb2a..b4e24af 100644
> --- a/arch/arm/mach-at91/include/mach/hardware.h
> +++ b/arch/arm/mach-at91/include/mach/hardware.h
> @@ -20,6 +20,8 @@
>  /* 9263, 9g45 */
>  #define AT91_BASE_DBGU1	0xffffee00
>  
> +#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
> +
>  #if defined(CONFIG_ARCH_AT91RM9200)
>  #include <mach/at91rm9200.h>
>  #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-01-02 11:00 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-28 19:13 [PATCH 00/13] at91: cleanup and switch core driver to device/driver Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16 ` [PATCH 01/13] at91: factorise dbgu address Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 02/13] at91: enable clock via clock framework Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:58     ` Sascha Hauer
2012-12-28 19:16   ` [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 11:00     ` Sascha Hauer [this message]
2012-12-28 19:16   ` [PATCH 04/13] at91: pmc: drop AT91_BASE_SYS Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 05/13] at91: introduce Kconfig to select the dbgu for lowlevel debug Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 06/13] at91: sync with the kernel address base Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 07/13] at91: at91sam9: provide its own clkdev for pit Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 08/13] at91: PIT: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59     ` Sascha Hauer
2012-12-28 19:16   ` [PATCH 09/13] at91: autodetect the soc one time at postcore_initcall Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 10/13] at91: SMC: switch to platfrom_driver Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:59     ` Sascha Hauer
2012-12-28 19:16   ` [PATCH 11/13] at91: wdt: drop AT91_SYS_BASE Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 12/13] at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER Jean-Christophe PLAGNIOL-VILLARD
2012-12-28 19:16   ` [PATCH 13/13] at91: drop AT91_BASE_PIOx for soc specific one for none boot code Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:07 ` [PATCH 00/13] at91: cleanup and switch core driver to device/driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130102110011.GV24458@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox