From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2013.01.0
Date: Wed, 9 Jan 2013 10:18:15 +0100 [thread overview]
Message-ID: <20130109091815.GS1906@pengutronix.de> (raw)
Hi All,
We have the first release for 2013. Hurray!
Sascha
----------------------------------------------------------------
Alexander Shiyan (8):
Cleanup Kconfig files
Remove bad Kconfig reference to HAS_CFI
Remove bad Kconfig reference to HAVE_MMU
Remove bad Kconfig reference to HAVE_CLK
Remove bad Kconfig reference to DISK_DRIVE
Remove bad Kconfig reference to HAS_PCI
Remove bad Kconfig reference to MTD_NAND
Fix wrong Kconfig reference to ARCH_IMX31
Antony Pavlov (8):
mem: add the swab (swap bytes) option to memory_display()
commands: md: add the '-x' option (swap bytes)
commands: mw: add the '-x' option (swap bytes)
clk: add always enabled clocks
commands: clk_dump: denote always enabled clocks
Makefile: move ctags and cscope support to a shell script
at25: use dev_lseek_default as at24 does
clk: use the 'CLK_ALWAYS_ENABLED' flag for clk-fixed by default
Christian Kapeller (1):
imx53: implement imx53_add_kpp
Enrico Scholz (2):
OMAP4: removed __packed__ annotation from pad_conf_entry
password: fixed underflow on <backspace>
Jan Luebbe (2):
net: phy: micrel: fix typo in driver name
ARM OMAP: add help text for OMAP_BUILD_IFT
Jean-Christophe PLAGNIOL-VILLARD (13):
phylib: export phy_id via param
phylib: introduction of forced 100Mbps
macb/ether: split flags for drivers and phylib
led-gpio: add bicolor led support
bus_for_each_device/bus_for_each_driver: add () to allow use &bus
bus: add bus device
driver: introduce device_probe to manully probe a device
phylib: fix generic phy driver probe
mdio_bus: fix match
phylib: add fixup support
phylib: add micrel support
arm: at91: add at91sam9n12 support
at91: add at91sam9n12ek board support
Juergen Beisert (1):
ARM/MXS/i.MX28: distinguish POR and wake-up event correctly
Robert P. J. Day (4):
OMAP3: Replace magic GPIO numbers in omap3_generic.c with macros.
Remove old, inaccurate "FileName:" cruft from ARM files
mach-omap/Kconfig: Some spelling fixes and indentation.
Define and use OMAP4 GPIO macros rather than magic constants.
Sascha Hauer (82):
clk: check for invalid clocks
mfd stmpe: add index to devicename
mfd stmpe: fix test for features
mtd oob: do not register oob device for devices without oob
mci: Add STUFF_BITS and use it
rm: implement -r
loadenv: allow more fine grained environment loading
ls command: call stat() only when necessary
filetype: Pass bufsize
add ext fs detection support
fs: implement initial ext4 support from U-Boot
mci: Fix capacity calculation for high capacity MMC cards
debug_ll: Let architectures define PUTC_LL directly
debug_ll: Add some usage comments
i.MX debug_ll support
ARM i.MX53 loco: switch to new default env
mci i.MX esdhc: turn error message into debug message
ARM i.MX6: fix ethernet PLL rate
ARM i.MX6: rename PLLs according to datasheet
clk: Add clk table based divider support
ARM i.MX6 pllv3: Do not use delay functions
ARM i.MX6 clk: remove gate_mask from pllv3
ARM i.MX: Add driver to get sdram base and size
ARM i.MX: register esdctl controller device
ARM i.MX boards: use esdctl code to detect sdram size
ARM i.MX bbu: Allow to overwrite app_dest
ARM i.MX bbu: Allow to have no DCD
ARM i.MX5: move pll setup defines to header file
ARM i.MX: add esdctl-v4 support
ARM i.MX esdctl: Use defines from exisiting header file
ARM i.MX: Add Garz+Fricke Vincell Board support
ARM i.MX bbu: Add i.MX6 MMC handler
ARM i.MX bbu internal: Add spi/i2c support
ARM i.MX6: save boot location
ata: Add i.MX PATA driver support
ARM i.MX: Add i.MX51 PATA device support
ARM i.MX6: Add sata device
mtd nand: allow partial page writes
mtd core: call driver write function with complete buffer
Merge branch 'pu/clk' into for-next/clk
ata: register disks as /dev/ata*
ata: fix status flags
ata: split ide sff suport to separate file
ata: align ata command defines with kernel
ata: Use dma_alloc for buffer
ata: Add ahci support
mfd: Add i.MX6 iomux gpr header file
ata: Add i.MX AHCI driver
ARM i.MX5: Add SATA support
Merge branch 'for-next/archos'
Merge branch 'for-next/at91'
Merge branch 'for-next/ata'
Merge branch 'for-next/clk'
Merge branch 'for-next/commands'
Merge branch 'for-next/driver'
Merge branch 'for-next/ext4'
Merge branch 'for-next/imx'
Merge branch 'for-next/led'
Merge branch 'for-next/mci'
Merge branch 'for-next/mem-commands'
Merge branch 'for-next/mfd'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd'
Merge branch 'for-next/omap'
Merge branch 'for-next/phylib'
Merge branch 'for-next/tftp'
Merge branch 'kconfig'
ARM startup: Ensure CR_A flag is cleared on architectures >= ARMv6
ARM omap3: Call common_reset
net phylib: Clear BMCR_PDOWN bit
net phylib: Call phy_update_status when no link is present
fs: move dev_add_child before device_register
drivers/base: fix corrupt device tree
esdctl: fix reset default bug on i.MX27/31
net phylib: force to wait for link
ARM i.MX31: Fix gpio device names
ARM i.MX31 pcm037: Force internal phy
ARM i.MX31 pcm037: make board bootable again
ARM i.MX31 pcm037: remove unused defines
Merge branch 'pu/devchild'
Merge branch 'pu/net-link'
Release v2013.01.0
Steffen Trumtrar (1):
stringlist: fix cpp macro in header
Vicente Bergas (2):
uimage: fix misunderstanding in common/uimage.c
archosg9: improve configuration
Wjatscheslaw Stoljarski (Slawa) (1):
MFD MC34708: Add dependence on SPI
Wolfram Sang (3):
mxs: get_fecclk is hclk, not a constant
commands: flash: add missing newlines to error messages
nand: mxs: NO_SUBPAGE_WRITE flag was overwritten
张忠山 (1):
let kbuild build foo/bar.o correctly
Makefile | 115 +---
arch/arm/Kconfig | 7 +-
arch/arm/Makefile | 2 +
arch/arm/boards/archosg9/env/config | 4 +-
arch/arm/boards/archosg9/env/init/usbboot | 9 +-
arch/arm/boards/at91rm9200ek/init.c | 2 +-
arch/arm/boards/at91sam9260ek/init.c | 2 +-
arch/arm/boards/at91sam9263ek/init.c | 2 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 2 +-
arch/arm/boards/at91sam9n12ek/Makefile | 1 +
arch/arm/boards/at91sam9n12ek/config.h | 6 +
arch/arm/boards/at91sam9n12ek/env/bin/init_board | 50 ++
arch/arm/boards/at91sam9n12ek/env/config | 41 ++
arch/arm/boards/at91sam9n12ek/init.c | 270 ++++++++
arch/arm/boards/at91sam9x5ek/init.c | 2 +-
arch/arm/boards/beagle/board.c | 2 -
arch/arm/boards/ccxmx51/ccxmx51.c | 9 -
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 8 -
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 14 -
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 8 -
arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c | 8 -
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 18 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 9 -
arch/arm/boards/freescale-mx51-pdk/board.c | 10 +-
arch/arm/boards/freescale-mx53-loco/board.c | 11 +-
arch/arm/boards/freescale-mx53-loco/env/config | 47 --
.../freescale-mx53-loco/env/init/config-board | 7 +
arch/arm/boards/freescale-mx53-smd/board.c | 9 -
arch/arm/boards/guf-cupid/board.c | 8 -
arch/arm/boards/guf-neso/board.c | 8 -
arch/arm/boards/guf-vincell/Makefile | 3 +
arch/arm/boards/guf-vincell/board.c | 322 +++++++++
.../arm/boards/guf-vincell/config.h | 26 +-
arch/arm/boards/guf-vincell/env/boot/nand-ubi | 10 +
arch/arm/boards/guf-vincell/env/init/bootargs-base | 8 +
arch/arm/boards/guf-vincell/env/init/hostname | 8 +
arch/arm/boards/guf-vincell/env/init/mtdparts-nand | 11 +
arch/arm/boards/guf-vincell/flash_header.c | 41 ++
arch/arm/boards/guf-vincell/lowlevel.c | 149 ++++
arch/arm/boards/imx27ads/imx27ads.c | 8 -
arch/arm/boards/karo-tx25/board.c | 14 +-
arch/arm/boards/karo-tx51/tx51.c | 8 -
arch/arm/boards/karo-tx53/board.c | 16 +-
arch/arm/boards/mmccpu/init.c | 2 +-
arch/arm/boards/omap343xdsp/board.c | 2 -
arch/arm/boards/omap3evm/board.c | 2 -
arch/arm/boards/pcm037/lowlevel_init.S | 2 +
arch/arm/boards/pcm037/pcm037.c | 30 +-
arch/arm/boards/pcm038/pcm038.c | 14 +-
arch/arm/boards/pcm043/pcm043.c | 8 -
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 7 +-
arch/arm/boards/phycard-a-l1/pca-a-l1.h | 7 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 8 -
arch/arm/boards/pm9263/init.c | 2 +-
arch/arm/boards/pm9g45/init.c | 2 +-
arch/arm/boards/qil-a9260/init.c | 2 +-
arch/arm/boards/scb9328/scb9328.c | 8 -
arch/arm/boards/tny-a926x/init.c | 2 +-
arch/arm/boards/tqma53/board.c | 11 -
arch/arm/boards/usb-a926x/init.c | 2 +-
arch/arm/configs/archosg9_defconfig | 2 +-
arch/arm/configs/at91sam9n12ek_defconfig | 87 +++
arch/arm/configs/freescale_mx53_loco_defconfig | 37 +-
arch/arm/configs/vincell_defconfig | 82 +++
arch/arm/cpu/Kconfig | 7 +-
arch/arm/include/asm/barebox-arm-head.h | 2 +
arch/arm/lib/bootm.c | 2 +-
arch/arm/mach-at91/Kconfig | 30 +-
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91rm9200_devices.c | 2 +-
arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
arch/arm/mach-at91/at91sam9263_devices.c | 2 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 2 +-
arch/arm/mach-at91/at91sam9n12.c | 233 +++++++
arch/arm/mach-at91/at91sam9n12_devices.c | 374 +++++++++++
arch/arm/mach-at91/at91sam9x5_devices.c | 4 +-
arch/arm/mach-at91/clock.c | 15 +-
arch/arm/mach-at91/gpio.c | 2 +-
arch/arm/mach-at91/include/mach/at91sam9n12.h | 166 +++++
.../mach-at91/include/mach/at91sam9n12_matrix.h | 98 +++
arch/arm/mach-at91/include/mach/board.h | 8 +-
arch/arm/mach-at91/include/mach/cpu.h | 7 +
arch/arm/mach-at91/include/mach/debug_ll.h | 2 +-
arch/arm/mach-at91/include/mach/hardware.h | 2 +
arch/arm/mach-imx/Kconfig | 38 +-
arch/arm/mach-imx/Makefile | 7 +-
arch/arm/mach-imx/boot.c | 60 ++
arch/arm/mach-imx/clk-imx5.c | 2 +
arch/arm/mach-imx/clk-imx6.c | 40 +-
arch/arm/mach-imx/clk-pllv3.c | 83 +--
arch/arm/mach-imx/clk.h | 2 +-
arch/arm/mach-imx/devices.c | 5 +
arch/arm/mach-imx/esdctl-v4.c | 710 ++++++++++++++++++++
arch/arm/mach-imx/esdctl.c | 355 ++++++++++
arch/arm/mach-imx/imx-bbu-internal.c | 123 +++-
arch/arm/mach-imx/imx1.c | 3 +
arch/arm/mach-imx/imx25.c | 1 +
arch/arm/mach-imx/imx27.c | 1 +
arch/arm/mach-imx/imx31.c | 7 +-
arch/arm/mach-imx/imx35.c | 1 +
arch/arm/mach-imx/imx51.c | 18 +-
arch/arm/mach-imx/imx53.c | 19 +-
arch/arm/mach-imx/imx6.c | 3 +
arch/arm/mach-imx/include/mach/bbu.h | 49 +-
arch/arm/mach-imx/include/mach/debug_ll.h | 46 ++
arch/arm/mach-imx/include/mach/devices-imx51.h | 5 +
arch/arm/mach-imx/include/mach/devices-imx53.h | 10 +
arch/arm/mach-imx/include/mach/devices-imx6.h | 5 +
arch/arm/mach-imx/include/mach/devices.h | 2 +-
arch/arm/mach-imx/include/mach/esdctl-v4.h | 520 ++++++++++++++
arch/arm/mach-imx/include/mach/esdctl.h | 1 +
arch/arm/mach-imx/include/mach/generic.h | 1 +
arch/arm/mach-imx/include/mach/imx1-regs.h | 3 +
arch/arm/mach-imx/include/mach/imx5.h | 12 +-
arch/arm/mach-imx/include/mach/imx53-regs.h | 2 +
arch/arm/mach-imx/include/mach/imx6-regs.h | 2 +
arch/arm/mach-mxs/Kconfig | 6 +-
arch/arm/mach-mxs/speed-imx28.c | 3 +-
arch/arm/mach-netx/Kconfig | 2 -
arch/arm/mach-omap/Kconfig | 27 +-
arch/arm/mach-omap/devices-gpmc-nand.c | 6 +-
arch/arm/mach-omap/gpmc.c | 6 +-
arch/arm/mach-omap/include/mach/clocks.h | 7 +-
arch/arm/mach-omap/include/mach/control.h | 6 +-
arch/arm/mach-omap/include/mach/debug_ll.h | 2 +-
arch/arm/mach-omap/include/mach/gpmc.h | 5 -
arch/arm/mach-omap/include/mach/gpmc_nand.h | 4 -
arch/arm/mach-omap/include/mach/intc.h | 6 +-
arch/arm/mach-omap/include/mach/omap3-clock.h | 6 +-
arch/arm/mach-omap/include/mach/omap3-mux.h | 7 +-
arch/arm/mach-omap/include/mach/omap3-silicon.h | 6 +-
arch/arm/mach-omap/include/mach/omap3-smx.h | 6 +-
arch/arm/mach-omap/include/mach/omap4-mux.h | 2 +-
arch/arm/mach-omap/include/mach/omap4-silicon.h | 15 +
arch/arm/mach-omap/include/mach/omap_hsmmc.h | 5 +-
arch/arm/mach-omap/include/mach/sdrc.h | 7 +-
arch/arm/mach-omap/include/mach/sys_info.h | 6 +-
arch/arm/mach-omap/include/mach/syslib.h | 7 +-
arch/arm/mach-omap/include/mach/timers.h | 4 +-
arch/arm/mach-omap/include/mach/wdt.h | 6 +-
arch/arm/mach-omap/omap3_clock.c | 6 +-
arch/arm/mach-omap/omap3_core.S | 6 +-
arch/arm/mach-omap/omap3_generic.c | 19 +-
arch/arm/mach-omap/omap4_generic.c | 12 +-
arch/arm/mach-omap/s32k_clksource.c | 5 -
arch/arm/mach-omap/syslib.c | 6 +-
arch/arm/mach-pxa/Kconfig | 2 -
arch/arm/mach-samsung/Kconfig | 18 +-
arch/arm/mach-tegra/include/mach/debug_ll.h | 2 +-
arch/arm/mach-versatile/include/mach/debug_ll.h | 2 +-
arch/blackfin/Kconfig | 2 +-
arch/mips/Kconfig | 26 +-
arch/mips/include/debug_ll_ns16550.h | 2 +-
arch/mips/mach-bcm47xx/include/mach/debug_ll.h | 2 +-
arch/nios2/Kconfig | 5 +-
arch/openrisc/Kconfig | 2 +-
arch/ppc/mach-mpc5xxx/Kconfig | 2 +-
arch/ppc/mach-mpc85xx/Kconfig | 3 +-
arch/x86/Kconfig | 15 +-
arch/x86/boot/Kconfig | 2 +-
arch/x86/mach-i386/Kconfig | 3 +-
commands/Kconfig | 31 +-
commands/bootm.c | 2 +-
commands/flash.c | 4 +-
commands/loadenv.c | 53 +-
commands/ls.c | 9 +-
commands/mem.c | 44 +-
commands/rm.c | 28 +-
commands/spi.c | 4 +-
common/Kconfig | 18 +-
common/console.c | 2 +-
common/environment.c | 12 +-
common/filetype.c | 47 +-
common/password.c | 13 +-
common/startup.c | 4 +-
common/uimage.c | 26 +-
crypto/Kconfig | 2 +-
drivers/Kconfig | 2 +-
drivers/ata/Kconfig | 23 +-
drivers/ata/Makefile | 4 +
drivers/ata/ahci.c | 678 +++++++++++++++++++
drivers/ata/ahci.h | 182 +++++
drivers/ata/disk_ata_drive.c | 345 +---------
drivers/ata/ide-sff.c | 343 ++++++++++
drivers/ata/intf_platform_ide.c | 2 +-
drivers/ata/pata-imx.c | 203 ++++++
drivers/ata/sata-imx.c | 155 +++++
drivers/base/bus.c | 10 +
drivers/base/driver.c | 50 +-
drivers/clk/Kconfig | 1 -
drivers/clk/Makefile | 2 +-
drivers/clk/clk-divider-table.c | 119 ++++
drivers/clk/clk-fixed.c | 1 +
drivers/clk/clk.c | 41 +-
drivers/dma/Kconfig | 2 +-
drivers/eeprom/Kconfig | 6 +-
drivers/eeprom/at25.c | 7 +-
drivers/gpio/Kconfig | 2 +-
drivers/i2c/Kconfig | 2 +-
drivers/i2c/i2c.c | 4 -
drivers/input/Kconfig | 4 +-
drivers/led/Kconfig | 4 +
drivers/led/led-gpio.c | 47 ++
drivers/mci/Kconfig | 4 +-
drivers/mci/imx-esdhc.c | 2 +-
drivers/mci/mci-core.c | 65 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/stmpe-i2c.c | 3 +-
drivers/misc/Kconfig | 2 +-
drivers/mtd/Kconfig | 2 +-
drivers/mtd/core.c | 60 +-
drivers/mtd/devices/Kconfig | 8 +-
drivers/mtd/mtdoob.c | 3 +
drivers/mtd/nand/Kconfig | 9 +-
drivers/mtd/nand/nand_mxs.c | 12 +-
drivers/mtd/nand/nand_write.c | 7 -
drivers/mtd/ubi/Kconfig | 2 +-
drivers/net/Kconfig | 2 +-
drivers/net/at91_ether.c | 2 +-
drivers/net/macb.c | 5 +-
drivers/net/phy/Kconfig | 13 +-
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/mdio_bus.c | 30 +-
drivers/net/phy/micrel.c | 174 +++++
drivers/net/phy/phy.c | 143 +++-
drivers/nor/Kconfig | 6 +-
drivers/serial/Kconfig | 4 +-
drivers/spi/Kconfig | 2 +-
drivers/spi/spi.c | 2 +-
drivers/usb/Kconfig | 2 +-
drivers/usb/gadget/Kconfig | 2 +-
drivers/video/Kconfig | 6 +-
drivers/w1/w1.c | 4 -
drivers/watchdog/Kconfig | 2 +-
drivers/watchdog/im28wd.c | 11 +
fs/Kconfig | 4 +-
fs/Makefile | 1 +
fs/ext4/Kconfig | 3 +
fs/ext4/Makefile | 1 +
fs/ext4/ext4_common.c | 551 +++++++++++++++
fs/ext4/ext4_common.h | 58 ++
fs/ext4/ext4fs.c | 153 +++++
fs/ext4/ext4fs.h | 127 ++++
fs/ext4/ext_barebox.c | 293 ++++++++
fs/ext4/ext_common.h | 195 ++++++
fs/fs.c | 10 +-
fs/tftp.c | 2 +-
include/ata_drive.h | 43 +-
include/common.h | 2 +-
include/debug_ll.h | 17 +-
include/driver.h | 16 +-
include/environment.h | 7 +-
include/filetype.h | 5 +-
include/fs.h | 2 +
include/led.h | 20 +
include/linux/clk.h | 11 +
include/linux/micrel_phy.h | 30 +
include/linux/phy.h | 22 +-
include/mfd/imx6q-iomuxc-gpr.h | 320 +++++++++
include/stringlist.h | 6 +-
lib/Kconfig | 6 +-
lib/Makefile | 1 +
lib/gui/Kconfig | 2 +-
lib/gui/image_renderer.c | 6 +-
lib/recursive_action.c | 1 -
lib/uncompress.c | 4 +-
lib/unlink-recursive.c | 56 ++
net/Kconfig | 2 +-
net/eth.c | 8 +-
net/net.c | 2 +-
scripts/Makefile.lib | 8 +-
scripts/bareboxenv.c | 2 +-
scripts/tags.sh | 265 ++++++++
274 files changed, 8973 insertions(+), 1454 deletions(-)
create mode 100644 arch/arm/boards/at91sam9n12ek/Makefile
create mode 100644 arch/arm/boards/at91sam9n12ek/config.h
create mode 100644 arch/arm/boards/at91sam9n12ek/env/bin/init_board
create mode 100644 arch/arm/boards/at91sam9n12ek/env/config
create mode 100644 arch/arm/boards/at91sam9n12ek/init.c
delete mode 100644 arch/arm/boards/freescale-mx53-loco/env/config
create mode 100644 arch/arm/boards/freescale-mx53-loco/env/init/config-board
create mode 100644 arch/arm/boards/guf-vincell/Makefile
create mode 100644 arch/arm/boards/guf-vincell/board.c
rename drivers/net/phy/generic.c => arch/arm/boards/guf-vincell/config.h (58%)
create mode 100644 arch/arm/boards/guf-vincell/env/boot/nand-ubi
create mode 100644 arch/arm/boards/guf-vincell/env/init/bootargs-base
create mode 100644 arch/arm/boards/guf-vincell/env/init/hostname
create mode 100644 arch/arm/boards/guf-vincell/env/init/mtdparts-nand
create mode 100644 arch/arm/boards/guf-vincell/flash_header.c
create mode 100644 arch/arm/boards/guf-vincell/lowlevel.c
create mode 100644 arch/arm/configs/at91sam9n12ek_defconfig
create mode 100644 arch/arm/configs/vincell_defconfig
create mode 100644 arch/arm/mach-at91/at91sam9n12.c
create mode 100644 arch/arm/mach-at91/at91sam9n12_devices.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
create mode 100644 arch/arm/mach-imx/esdctl-v4.c
create mode 100644 arch/arm/mach-imx/esdctl.c
create mode 100644 arch/arm/mach-imx/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-imx/include/mach/esdctl-v4.h
create mode 100644 drivers/ata/ahci.c
create mode 100644 drivers/ata/ahci.h
create mode 100644 drivers/ata/ide-sff.c
create mode 100644 drivers/ata/pata-imx.c
create mode 100644 drivers/ata/sata-imx.c
create mode 100644 drivers/clk/clk-divider-table.c
create mode 100644 drivers/net/phy/micrel.c
create mode 100644 fs/ext4/Kconfig
create mode 100644 fs/ext4/Makefile
create mode 100644 fs/ext4/ext4_common.c
create mode 100644 fs/ext4/ext4_common.h
create mode 100644 fs/ext4/ext4fs.c
create mode 100644 fs/ext4/ext4fs.h
create mode 100644 fs/ext4/ext_barebox.c
create mode 100644 fs/ext4/ext_common.h
create mode 100644 include/linux/micrel_phy.h
create mode 100644 include/mfd/imx6q-iomuxc-gpr.h
create mode 100644 lib/unlink-recursive.c
create mode 100755 scripts/tags.sh
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2013-01-09 9:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130109091815.GS1906@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox