mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* v2013.01.0
@ 2013-01-09  9:18 Sascha Hauer
  0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2013-01-09  9:18 UTC (permalink / raw)
  To: barebox


Hi All,

We have the first release for 2013. Hurray!

Sascha

----------------------------------------------------------------
Alexander Shiyan (8):
      Cleanup Kconfig files
      Remove bad Kconfig reference to HAS_CFI
      Remove bad Kconfig reference to HAVE_MMU
      Remove bad Kconfig reference to HAVE_CLK
      Remove bad Kconfig reference to DISK_DRIVE
      Remove bad Kconfig reference to HAS_PCI
      Remove bad Kconfig reference to MTD_NAND
      Fix wrong Kconfig reference to ARCH_IMX31

Antony Pavlov (8):
      mem: add the swab (swap bytes) option to memory_display()
      commands: md: add the '-x' option (swap bytes)
      commands: mw: add the '-x' option (swap bytes)
      clk: add always enabled clocks
      commands: clk_dump: denote always enabled clocks
      Makefile: move ctags and cscope support to a shell script
      at25: use dev_lseek_default as at24 does
      clk: use the 'CLK_ALWAYS_ENABLED' flag for clk-fixed by default

Christian Kapeller (1):
      imx53: implement imx53_add_kpp

Enrico Scholz (2):
      OMAP4: removed __packed__ annotation from pad_conf_entry
      password: fixed underflow on <backspace>

Jan Luebbe (2):
      net: phy: micrel: fix typo in driver name
      ARM OMAP: add help text for OMAP_BUILD_IFT

Jean-Christophe PLAGNIOL-VILLARD (13):
      phylib: export phy_id via param
      phylib: introduction of forced 100Mbps
      macb/ether: split flags for drivers and phylib
      led-gpio: add bicolor led support
      bus_for_each_device/bus_for_each_driver: add () to allow use &bus
      bus: add bus device
      driver: introduce device_probe to manully probe a device
      phylib: fix generic phy driver probe
      mdio_bus: fix match
      phylib: add fixup support
      phylib: add micrel support
      arm: at91: add at91sam9n12 support
      at91: add at91sam9n12ek board support

Juergen Beisert (1):
      ARM/MXS/i.MX28: distinguish POR and wake-up event correctly

Robert P. J. Day (4):
      OMAP3: Replace magic GPIO numbers in omap3_generic.c with macros.
      Remove old, inaccurate "FileName:" cruft from ARM files
      mach-omap/Kconfig: Some spelling fixes and indentation.
      Define and use OMAP4 GPIO macros rather than magic constants.

Sascha Hauer (82):
      clk: check for invalid clocks
      mfd stmpe: add index to devicename
      mfd stmpe: fix test for features
      mtd oob: do not register oob device for devices without oob
      mci: Add STUFF_BITS and use it
      rm: implement -r
      loadenv: allow more fine grained environment loading
      ls command: call stat() only when necessary
      filetype: Pass bufsize
      add ext fs detection support
      fs: implement initial ext4 support from U-Boot
      mci: Fix capacity calculation for high capacity MMC cards
      debug_ll: Let architectures define PUTC_LL directly
      debug_ll: Add some usage comments
      i.MX debug_ll support
      ARM i.MX53 loco: switch to new default env
      mci i.MX esdhc: turn error message into debug message
      ARM i.MX6: fix ethernet PLL rate
      ARM i.MX6: rename PLLs according to datasheet
      clk: Add clk table based divider support
      ARM i.MX6 pllv3: Do not use delay functions
      ARM i.MX6 clk: remove gate_mask from pllv3
      ARM i.MX: Add driver to get sdram base and size
      ARM i.MX: register esdctl controller device
      ARM i.MX boards: use esdctl code to detect sdram size
      ARM i.MX bbu: Allow to overwrite app_dest
      ARM i.MX bbu: Allow to have no DCD
      ARM i.MX5: move pll setup defines to header file
      ARM i.MX: add esdctl-v4 support
      ARM i.MX esdctl: Use defines from exisiting header file
      ARM i.MX: Add Garz+Fricke Vincell Board support
      ARM i.MX bbu: Add i.MX6 MMC handler
      ARM i.MX bbu internal: Add spi/i2c support
      ARM i.MX6: save boot location
      ata: Add i.MX PATA driver support
      ARM i.MX: Add i.MX51 PATA device support
      ARM i.MX6: Add sata device
      mtd nand: allow partial page writes
      mtd core: call driver write function with complete buffer
      Merge branch 'pu/clk' into for-next/clk
      ata: register disks as /dev/ata*
      ata: fix status flags
      ata: split ide sff suport to separate file
      ata: align ata command defines with kernel
      ata: Use dma_alloc for buffer
      ata: Add ahci support
      mfd: Add i.MX6 iomux gpr header file
      ata: Add i.MX AHCI driver
      ARM i.MX5: Add SATA support
      Merge branch 'for-next/archos'
      Merge branch 'for-next/at91'
      Merge branch 'for-next/ata'
      Merge branch 'for-next/clk'
      Merge branch 'for-next/commands'
      Merge branch 'for-next/driver'
      Merge branch 'for-next/ext4'
      Merge branch 'for-next/imx'
      Merge branch 'for-next/led'
      Merge branch 'for-next/mci'
      Merge branch 'for-next/mem-commands'
      Merge branch 'for-next/mfd'
      Merge branch 'for-next/misc'
      Merge branch 'for-next/mtd'
      Merge branch 'for-next/omap'
      Merge branch 'for-next/phylib'
      Merge branch 'for-next/tftp'
      Merge branch 'kconfig'
      ARM startup: Ensure CR_A flag is cleared on architectures >= ARMv6
      ARM omap3: Call common_reset
      net phylib: Clear BMCR_PDOWN bit
      net phylib: Call phy_update_status when no link is present
      fs: move dev_add_child before device_register
      drivers/base: fix corrupt device tree
      esdctl: fix reset default bug on i.MX27/31
      net phylib: force to wait for link
      ARM i.MX31: Fix gpio device names
      ARM i.MX31 pcm037: Force internal phy
      ARM i.MX31 pcm037: make board bootable again
      ARM i.MX31 pcm037: remove unused defines
      Merge branch 'pu/devchild'
      Merge branch 'pu/net-link'
      Release v2013.01.0

Steffen Trumtrar (1):
      stringlist: fix cpp macro in header

Vicente Bergas (2):
      uimage: fix misunderstanding in common/uimage.c
      archosg9: improve configuration

Wjatscheslaw Stoljarski (Slawa) (1):
      MFD MC34708: Add dependence on SPI

Wolfram Sang (3):
      mxs: get_fecclk is hclk, not a constant
      commands: flash: add missing newlines to error messages
      nand: mxs: NO_SUBPAGE_WRITE flag was overwritten

张忠山 (1):
      let kbuild build foo/bar.o correctly

 Makefile                                           |  115 +---
 arch/arm/Kconfig                                   |    7 +-
 arch/arm/Makefile                                  |    2 +
 arch/arm/boards/archosg9/env/config                |    4 +-
 arch/arm/boards/archosg9/env/init/usbboot          |    9 +-
 arch/arm/boards/at91rm9200ek/init.c                |    2 +-
 arch/arm/boards/at91sam9260ek/init.c               |    2 +-
 arch/arm/boards/at91sam9263ek/init.c               |    2 +-
 arch/arm/boards/at91sam9m10g45ek/init.c            |    2 +-
 arch/arm/boards/at91sam9n12ek/Makefile             |    1 +
 arch/arm/boards/at91sam9n12ek/config.h             |    6 +
 arch/arm/boards/at91sam9n12ek/env/bin/init_board   |   50 ++
 arch/arm/boards/at91sam9n12ek/env/config           |   41 ++
 arch/arm/boards/at91sam9n12ek/init.c               |  270 ++++++++
 arch/arm/boards/at91sam9x5ek/init.c                |    2 +-
 arch/arm/boards/beagle/board.c                     |    2 -
 arch/arm/boards/ccxmx51/ccxmx51.c                  |    9 -
 arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c  |    8 -
 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c  |   14 -
 arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c  |    8 -
 arch/arm/boards/eukrea_cpuimx51/eukrea_cpuimx51.c  |    8 -
 arch/arm/boards/freescale-mx25-3-stack/3stack.c    |   18 +-
 arch/arm/boards/freescale-mx35-3-stack/3stack.c    |    9 -
 arch/arm/boards/freescale-mx51-pdk/board.c         |   10 +-
 arch/arm/boards/freescale-mx53-loco/board.c        |   11 +-
 arch/arm/boards/freescale-mx53-loco/env/config     |   47 --
 .../freescale-mx53-loco/env/init/config-board      |    7 +
 arch/arm/boards/freescale-mx53-smd/board.c         |    9 -
 arch/arm/boards/guf-cupid/board.c                  |    8 -
 arch/arm/boards/guf-neso/board.c                   |    8 -
 arch/arm/boards/guf-vincell/Makefile               |    3 +
 arch/arm/boards/guf-vincell/board.c                |  322 +++++++++
 .../arm/boards/guf-vincell/config.h                |   26 +-
 arch/arm/boards/guf-vincell/env/boot/nand-ubi      |   10 +
 arch/arm/boards/guf-vincell/env/init/bootargs-base |    8 +
 arch/arm/boards/guf-vincell/env/init/hostname      |    8 +
 arch/arm/boards/guf-vincell/env/init/mtdparts-nand |   11 +
 arch/arm/boards/guf-vincell/flash_header.c         |   41 ++
 arch/arm/boards/guf-vincell/lowlevel.c             |  149 ++++
 arch/arm/boards/imx27ads/imx27ads.c                |    8 -
 arch/arm/boards/karo-tx25/board.c                  |   14 +-
 arch/arm/boards/karo-tx51/tx51.c                   |    8 -
 arch/arm/boards/karo-tx53/board.c                  |   16 +-
 arch/arm/boards/mmccpu/init.c                      |    2 +-
 arch/arm/boards/omap343xdsp/board.c                |    2 -
 arch/arm/boards/omap3evm/board.c                   |    2 -
 arch/arm/boards/pcm037/lowlevel_init.S             |    2 +
 arch/arm/boards/pcm037/pcm037.c                    |   30 +-
 arch/arm/boards/pcm038/pcm038.c                    |   14 +-
 arch/arm/boards/pcm043/pcm043.c                    |    8 -
 arch/arm/boards/phycard-a-l1/pca-a-l1.c            |    7 +-
 arch/arm/boards/phycard-a-l1/pca-a-l1.h            |    7 +-
 arch/arm/boards/phycard-i.MX27/pca100.c            |    8 -
 arch/arm/boards/pm9263/init.c                      |    2 +-
 arch/arm/boards/pm9g45/init.c                      |    2 +-
 arch/arm/boards/qil-a9260/init.c                   |    2 +-
 arch/arm/boards/scb9328/scb9328.c                  |    8 -
 arch/arm/boards/tny-a926x/init.c                   |    2 +-
 arch/arm/boards/tqma53/board.c                     |   11 -
 arch/arm/boards/usb-a926x/init.c                   |    2 +-
 arch/arm/configs/archosg9_defconfig                |    2 +-
 arch/arm/configs/at91sam9n12ek_defconfig           |   87 +++
 arch/arm/configs/freescale_mx53_loco_defconfig     |   37 +-
 arch/arm/configs/vincell_defconfig                 |   82 +++
 arch/arm/cpu/Kconfig                               |    7 +-
 arch/arm/include/asm/barebox-arm-head.h            |    2 +
 arch/arm/lib/bootm.c                               |    2 +-
 arch/arm/mach-at91/Kconfig                         |   30 +-
 arch/arm/mach-at91/Makefile                        |    1 +
 arch/arm/mach-at91/at91rm9200_devices.c            |    2 +-
 arch/arm/mach-at91/at91sam9260_devices.c           |    2 +-
 arch/arm/mach-at91/at91sam9263_devices.c           |    2 +-
 arch/arm/mach-at91/at91sam9g45_devices.c           |    2 +-
 arch/arm/mach-at91/at91sam9n12.c                   |  233 +++++++
 arch/arm/mach-at91/at91sam9n12_devices.c           |  374 +++++++++++
 arch/arm/mach-at91/at91sam9x5_devices.c            |    4 +-
 arch/arm/mach-at91/clock.c                         |   15 +-
 arch/arm/mach-at91/gpio.c                          |    2 +-
 arch/arm/mach-at91/include/mach/at91sam9n12.h      |  166 +++++
 .../mach-at91/include/mach/at91sam9n12_matrix.h    |   98 +++
 arch/arm/mach-at91/include/mach/board.h            |    8 +-
 arch/arm/mach-at91/include/mach/cpu.h              |    7 +
 arch/arm/mach-at91/include/mach/debug_ll.h         |    2 +-
 arch/arm/mach-at91/include/mach/hardware.h         |    2 +
 arch/arm/mach-imx/Kconfig                          |   38 +-
 arch/arm/mach-imx/Makefile                         |    7 +-
 arch/arm/mach-imx/boot.c                           |   60 ++
 arch/arm/mach-imx/clk-imx5.c                       |    2 +
 arch/arm/mach-imx/clk-imx6.c                       |   40 +-
 arch/arm/mach-imx/clk-pllv3.c                      |   83 +--
 arch/arm/mach-imx/clk.h                            |    2 +-
 arch/arm/mach-imx/devices.c                        |    5 +
 arch/arm/mach-imx/esdctl-v4.c                      |  710 ++++++++++++++++++++
 arch/arm/mach-imx/esdctl.c                         |  355 ++++++++++
 arch/arm/mach-imx/imx-bbu-internal.c               |  123 +++-
 arch/arm/mach-imx/imx1.c                           |    3 +
 arch/arm/mach-imx/imx25.c                          |    1 +
 arch/arm/mach-imx/imx27.c                          |    1 +
 arch/arm/mach-imx/imx31.c                          |    7 +-
 arch/arm/mach-imx/imx35.c                          |    1 +
 arch/arm/mach-imx/imx51.c                          |   18 +-
 arch/arm/mach-imx/imx53.c                          |   19 +-
 arch/arm/mach-imx/imx6.c                           |    3 +
 arch/arm/mach-imx/include/mach/bbu.h               |   49 +-
 arch/arm/mach-imx/include/mach/debug_ll.h          |   46 ++
 arch/arm/mach-imx/include/mach/devices-imx51.h     |    5 +
 arch/arm/mach-imx/include/mach/devices-imx53.h     |   10 +
 arch/arm/mach-imx/include/mach/devices-imx6.h      |    5 +
 arch/arm/mach-imx/include/mach/devices.h           |    2 +-
 arch/arm/mach-imx/include/mach/esdctl-v4.h         |  520 ++++++++++++++
 arch/arm/mach-imx/include/mach/esdctl.h            |    1 +
 arch/arm/mach-imx/include/mach/generic.h           |    1 +
 arch/arm/mach-imx/include/mach/imx1-regs.h         |    3 +
 arch/arm/mach-imx/include/mach/imx5.h              |   12 +-
 arch/arm/mach-imx/include/mach/imx53-regs.h        |    2 +
 arch/arm/mach-imx/include/mach/imx6-regs.h         |    2 +
 arch/arm/mach-mxs/Kconfig                          |    6 +-
 arch/arm/mach-mxs/speed-imx28.c                    |    3 +-
 arch/arm/mach-netx/Kconfig                         |    2 -
 arch/arm/mach-omap/Kconfig                         |   27 +-
 arch/arm/mach-omap/devices-gpmc-nand.c             |    6 +-
 arch/arm/mach-omap/gpmc.c                          |    6 +-
 arch/arm/mach-omap/include/mach/clocks.h           |    7 +-
 arch/arm/mach-omap/include/mach/control.h          |    6 +-
 arch/arm/mach-omap/include/mach/debug_ll.h         |    2 +-
 arch/arm/mach-omap/include/mach/gpmc.h             |    5 -
 arch/arm/mach-omap/include/mach/gpmc_nand.h        |    4 -
 arch/arm/mach-omap/include/mach/intc.h             |    6 +-
 arch/arm/mach-omap/include/mach/omap3-clock.h      |    6 +-
 arch/arm/mach-omap/include/mach/omap3-mux.h        |    7 +-
 arch/arm/mach-omap/include/mach/omap3-silicon.h    |    6 +-
 arch/arm/mach-omap/include/mach/omap3-smx.h        |    6 +-
 arch/arm/mach-omap/include/mach/omap4-mux.h        |    2 +-
 arch/arm/mach-omap/include/mach/omap4-silicon.h    |   15 +
 arch/arm/mach-omap/include/mach/omap_hsmmc.h       |    5 +-
 arch/arm/mach-omap/include/mach/sdrc.h             |    7 +-
 arch/arm/mach-omap/include/mach/sys_info.h         |    6 +-
 arch/arm/mach-omap/include/mach/syslib.h           |    7 +-
 arch/arm/mach-omap/include/mach/timers.h           |    4 +-
 arch/arm/mach-omap/include/mach/wdt.h              |    6 +-
 arch/arm/mach-omap/omap3_clock.c                   |    6 +-
 arch/arm/mach-omap/omap3_core.S                    |    6 +-
 arch/arm/mach-omap/omap3_generic.c                 |   19 +-
 arch/arm/mach-omap/omap4_generic.c                 |   12 +-
 arch/arm/mach-omap/s32k_clksource.c                |    5 -
 arch/arm/mach-omap/syslib.c                        |    6 +-
 arch/arm/mach-pxa/Kconfig                          |    2 -
 arch/arm/mach-samsung/Kconfig                      |   18 +-
 arch/arm/mach-tegra/include/mach/debug_ll.h        |    2 +-
 arch/arm/mach-versatile/include/mach/debug_ll.h    |    2 +-
 arch/blackfin/Kconfig                              |    2 +-
 arch/mips/Kconfig                                  |   26 +-
 arch/mips/include/debug_ll_ns16550.h               |    2 +-
 arch/mips/mach-bcm47xx/include/mach/debug_ll.h     |    2 +-
 arch/nios2/Kconfig                                 |    5 +-
 arch/openrisc/Kconfig                              |    2 +-
 arch/ppc/mach-mpc5xxx/Kconfig                      |    2 +-
 arch/ppc/mach-mpc85xx/Kconfig                      |    3 +-
 arch/x86/Kconfig                                   |   15 +-
 arch/x86/boot/Kconfig                              |    2 +-
 arch/x86/mach-i386/Kconfig                         |    3 +-
 commands/Kconfig                                   |   31 +-
 commands/bootm.c                                   |    2 +-
 commands/flash.c                                   |    4 +-
 commands/loadenv.c                                 |   53 +-
 commands/ls.c                                      |    9 +-
 commands/mem.c                                     |   44 +-
 commands/rm.c                                      |   28 +-
 commands/spi.c                                     |    4 +-
 common/Kconfig                                     |   18 +-
 common/console.c                                   |    2 +-
 common/environment.c                               |   12 +-
 common/filetype.c                                  |   47 +-
 common/password.c                                  |   13 +-
 common/startup.c                                   |    4 +-
 common/uimage.c                                    |   26 +-
 crypto/Kconfig                                     |    2 +-
 drivers/Kconfig                                    |    2 +-
 drivers/ata/Kconfig                                |   23 +-
 drivers/ata/Makefile                               |    4 +
 drivers/ata/ahci.c                                 |  678 +++++++++++++++++++
 drivers/ata/ahci.h                                 |  182 +++++
 drivers/ata/disk_ata_drive.c                       |  345 +---------
 drivers/ata/ide-sff.c                              |  343 ++++++++++
 drivers/ata/intf_platform_ide.c                    |    2 +-
 drivers/ata/pata-imx.c                             |  203 ++++++
 drivers/ata/sata-imx.c                             |  155 +++++
 drivers/base/bus.c                                 |   10 +
 drivers/base/driver.c                              |   50 +-
 drivers/clk/Kconfig                                |    1 -
 drivers/clk/Makefile                               |    2 +-
 drivers/clk/clk-divider-table.c                    |  119 ++++
 drivers/clk/clk-fixed.c                            |    1 +
 drivers/clk/clk.c                                  |   41 +-
 drivers/dma/Kconfig                                |    2 +-
 drivers/eeprom/Kconfig                             |    6 +-
 drivers/eeprom/at25.c                              |    7 +-
 drivers/gpio/Kconfig                               |    2 +-
 drivers/i2c/Kconfig                                |    2 +-
 drivers/i2c/i2c.c                                  |    4 -
 drivers/input/Kconfig                              |    4 +-
 drivers/led/Kconfig                                |    4 +
 drivers/led/led-gpio.c                             |   47 ++
 drivers/mci/Kconfig                                |    4 +-
 drivers/mci/imx-esdhc.c                            |    2 +-
 drivers/mci/mci-core.c                             |   65 +-
 drivers/mfd/Kconfig                                |    4 +-
 drivers/mfd/Makefile                               |    2 +-
 drivers/mfd/stmpe-i2c.c                            |    3 +-
 drivers/misc/Kconfig                               |    2 +-
 drivers/mtd/Kconfig                                |    2 +-
 drivers/mtd/core.c                                 |   60 +-
 drivers/mtd/devices/Kconfig                        |    8 +-
 drivers/mtd/mtdoob.c                               |    3 +
 drivers/mtd/nand/Kconfig                           |    9 +-
 drivers/mtd/nand/nand_mxs.c                        |   12 +-
 drivers/mtd/nand/nand_write.c                      |    7 -
 drivers/mtd/ubi/Kconfig                            |    2 +-
 drivers/net/Kconfig                                |    2 +-
 drivers/net/at91_ether.c                           |    2 +-
 drivers/net/macb.c                                 |    5 +-
 drivers/net/phy/Kconfig                            |   13 +-
 drivers/net/phy/Makefile                           |    2 +-
 drivers/net/phy/mdio_bus.c                         |   30 +-
 drivers/net/phy/micrel.c                           |  174 +++++
 drivers/net/phy/phy.c                              |  143 +++-
 drivers/nor/Kconfig                                |    6 +-
 drivers/serial/Kconfig                             |    4 +-
 drivers/spi/Kconfig                                |    2 +-
 drivers/spi/spi.c                                  |    2 +-
 drivers/usb/Kconfig                                |    2 +-
 drivers/usb/gadget/Kconfig                         |    2 +-
 drivers/video/Kconfig                              |    6 +-
 drivers/w1/w1.c                                    |    4 -
 drivers/watchdog/Kconfig                           |    2 +-
 drivers/watchdog/im28wd.c                          |   11 +
 fs/Kconfig                                         |    4 +-
 fs/Makefile                                        |    1 +
 fs/ext4/Kconfig                                    |    3 +
 fs/ext4/Makefile                                   |    1 +
 fs/ext4/ext4_common.c                              |  551 +++++++++++++++
 fs/ext4/ext4_common.h                              |   58 ++
 fs/ext4/ext4fs.c                                   |  153 +++++
 fs/ext4/ext4fs.h                                   |  127 ++++
 fs/ext4/ext_barebox.c                              |  293 ++++++++
 fs/ext4/ext_common.h                               |  195 ++++++
 fs/fs.c                                            |   10 +-
 fs/tftp.c                                          |    2 +-
 include/ata_drive.h                                |   43 +-
 include/common.h                                   |    2 +-
 include/debug_ll.h                                 |   17 +-
 include/driver.h                                   |   16 +-
 include/environment.h                              |    7 +-
 include/filetype.h                                 |    5 +-
 include/fs.h                                       |    2 +
 include/led.h                                      |   20 +
 include/linux/clk.h                                |   11 +
 include/linux/micrel_phy.h                         |   30 +
 include/linux/phy.h                                |   22 +-
 include/mfd/imx6q-iomuxc-gpr.h                     |  320 +++++++++
 include/stringlist.h                               |    6 +-
 lib/Kconfig                                        |    6 +-
 lib/Makefile                                       |    1 +
 lib/gui/Kconfig                                    |    2 +-
 lib/gui/image_renderer.c                           |    6 +-
 lib/recursive_action.c                             |    1 -
 lib/uncompress.c                                   |    4 +-
 lib/unlink-recursive.c                             |   56 ++
 net/Kconfig                                        |    2 +-
 net/eth.c                                          |    8 +-
 net/net.c                                          |    2 +-
 scripts/Makefile.lib                               |    8 +-
 scripts/bareboxenv.c                               |    2 +-
 scripts/tags.sh                                    |  265 ++++++++
 274 files changed, 8973 insertions(+), 1454 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9n12ek/Makefile
 create mode 100644 arch/arm/boards/at91sam9n12ek/config.h
 create mode 100644 arch/arm/boards/at91sam9n12ek/env/bin/init_board
 create mode 100644 arch/arm/boards/at91sam9n12ek/env/config
 create mode 100644 arch/arm/boards/at91sam9n12ek/init.c
 delete mode 100644 arch/arm/boards/freescale-mx53-loco/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-loco/env/init/config-board
 create mode 100644 arch/arm/boards/guf-vincell/Makefile
 create mode 100644 arch/arm/boards/guf-vincell/board.c
 rename drivers/net/phy/generic.c => arch/arm/boards/guf-vincell/config.h (58%)
 create mode 100644 arch/arm/boards/guf-vincell/env/boot/nand-ubi
 create mode 100644 arch/arm/boards/guf-vincell/env/init/bootargs-base
 create mode 100644 arch/arm/boards/guf-vincell/env/init/hostname
 create mode 100644 arch/arm/boards/guf-vincell/env/init/mtdparts-nand
 create mode 100644 arch/arm/boards/guf-vincell/flash_header.c
 create mode 100644 arch/arm/boards/guf-vincell/lowlevel.c
 create mode 100644 arch/arm/configs/at91sam9n12ek_defconfig
 create mode 100644 arch/arm/configs/vincell_defconfig
 create mode 100644 arch/arm/mach-at91/at91sam9n12.c
 create mode 100644 arch/arm/mach-at91/at91sam9n12_devices.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
 create mode 100644 arch/arm/mach-imx/esdctl-v4.c
 create mode 100644 arch/arm/mach-imx/esdctl.c
 create mode 100644 arch/arm/mach-imx/include/mach/debug_ll.h
 create mode 100644 arch/arm/mach-imx/include/mach/esdctl-v4.h
 create mode 100644 drivers/ata/ahci.c
 create mode 100644 drivers/ata/ahci.h
 create mode 100644 drivers/ata/ide-sff.c
 create mode 100644 drivers/ata/pata-imx.c
 create mode 100644 drivers/ata/sata-imx.c
 create mode 100644 drivers/clk/clk-divider-table.c
 create mode 100644 drivers/net/phy/micrel.c
 create mode 100644 fs/ext4/Kconfig
 create mode 100644 fs/ext4/Makefile
 create mode 100644 fs/ext4/ext4_common.c
 create mode 100644 fs/ext4/ext4_common.h
 create mode 100644 fs/ext4/ext4fs.c
 create mode 100644 fs/ext4/ext4fs.h
 create mode 100644 fs/ext4/ext_barebox.c
 create mode 100644 fs/ext4/ext_common.h
 create mode 100644 include/linux/micrel_phy.h
 create mode 100644 include/mfd/imx6q-iomuxc-gpr.h
 create mode 100644 lib/unlink-recursive.c
 create mode 100755 scripts/tags.sh
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2013-01-09  9:18 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-09  9:18 v2013.01.0 Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox