* [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
@ 2013-01-24 14:42 Fabio Porcedda
2013-01-24 15:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-24 15:53 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 2 replies; 7+ messages in thread
From: Fabio Porcedda @ 2013-01-24 14:42 UTC (permalink / raw)
To: barebox
http://www.telit.com
Based on at91sam9260ek board support.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
v3:
- add dfu support
- init.c: reduced bootstrap size
- init.c: moved istructions from evk_add_device_nand function to the struct
- init.c: remove blank line
- renamed to telit-evk-pro3
v2:
- init.c: remove 9260ek and g20ek references
- init.c: rename ek_ -> evk_
- init.c: cleanup headers
- init.c: use clock framework
- init.c: remove function ek_set_board_type
- init.c: remove bus_width_16 initialization
arch/arm/Makefile | 1 +
arch/arm/boards/telit-evk-pro3/Makefile | 1 +
arch/arm/boards/telit-evk-pro3/config.h | 6 +
arch/arm/boards/telit-evk-pro3/env/boot/nand-ubi | 10 ++
.../boards/telit-evk-pro3/env/init/config-board | 8 +
.../boards/telit-evk-pro3/env/init/mtdparts-nand | 11 ++
arch/arm/boards/telit-evk-pro3/env/init/usb | 26 +++
arch/arm/boards/telit-evk-pro3/init.c | 178 +++++++++++++++++++++
arch/arm/configs/telit_evk_pro3_defconfig | 73 +++++++++
arch/arm/mach-at91/Kconfig | 9 ++
10 files changed, 323 insertions(+)
create mode 100644 arch/arm/boards/telit-evk-pro3/Makefile
create mode 100644 arch/arm/boards/telit-evk-pro3/config.h
create mode 100644 arch/arm/boards/telit-evk-pro3/env/boot/nand-ubi
create mode 100644 arch/arm/boards/telit-evk-pro3/env/init/config-board
create mode 100644 arch/arm/boards/telit-evk-pro3/env/init/mtdparts-nand
create mode 100644 arch/arm/boards/telit-evk-pro3/env/init/usb
create mode 100644 arch/arm/boards/telit-evk-pro3/init.c
create mode 100644 arch/arm/configs/telit_evk_pro3_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a36adfb..60661eb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,6 +94,7 @@ board-$(CONFIG_MACH_EUKREA_CPUIMX35) := eukrea_cpuimx35
board-$(CONFIG_MACH_EUKREA_CPUIMX51SD) := eukrea_cpuimx51
board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
+board-$(CONFIG_MACH_GE863) := telit-evk-pro3
board-$(CONFIG_MACH_IMX21ADS) := imx21ads
board-$(CONFIG_MACH_IMX27ADS) := imx27ads
board-$(CONFIG_MACH_IMX233_OLINUXINO) := imx233-olinuxino
diff --git a/arch/arm/boards/telit-evk-pro3/Makefile b/arch/arm/boards/telit-evk-pro3/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/telit-evk-pro3/config.h b/arch/arm/boards/telit-evk-pro3/config.h
new file mode 100644
index 0000000..7aeff30
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK 6000000 /* 6.000 MHz crystal */
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/telit-evk-pro3/env/boot/nand-ubi b/arch/arm/boards/telit-evk-pro3/env/boot/nand-ubi
new file mode 100644
index 0000000..1987492
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/boot/nand-ubi
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "nand (UBI)"
+ exit
+fi
+
+global.bootm.image="/dev/nand0.kernel.bb"
+#global.bootm.oftree="/env/oftree"
+global.linux.bootargs.dyn.root="root=ubi0:rootfs ubi.mtd=nand0.rootfs rootfstype=ubifs"
diff --git a/arch/arm/boards/telit-evk-pro3/env/init/config-board b/arch/arm/boards/telit-evk-pro3/env/init/config-board
new file mode 100644
index 0000000..741b902
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/init/config-board
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=evk-pro3
+global.linux.bootargs.base="console=ttyS0,115200"
+global.boot.default=nand-ubi
diff --git a/arch/arm/boards/telit-evk-pro3/env/init/mtdparts-nand b/arch/arm/boards/telit-evk-pro3/env/init/mtdparts-nand
new file mode 100644
index 0000000..58e859b
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/init/mtdparts-nand
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NAND partitions"
+ exit
+fi
+
+mtdparts="0xC0000(nand0.bootstrap),256k(nand0.barebox)ro,128k(nand0.bareboxenv),3M(nand0.kernel),-(nand0.rootfs)"
+kernelname="atmel_nand"
+
+mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/telit-evk-pro3/env/init/usb b/arch/arm/boards/telit-evk-pro3/env/init/usb
new file mode 100644
index 0000000..afa0416
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/env/init/usb
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Uncomment the following line to enalbe dfu instead of usbserial
+#dfu_enabled="y"
+
+product_id=0x1234
+vendor_id=0x4321
+
+dfu_config="/dev/nand0.bootstrap.bb(bootstrap)sr,/dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.rootfs.bb(rootfs)r"
+
+if [ $at91_udc0.vbus != 1 ]; then
+ echo
+ echo "No USB Device cable plugged, normal boot"
+ exit
+fi
+
+if [ -n $dfu_enabled ]; then
+ echo
+ echo "Start DFU Mode"
+ dfu ${dfu_config} -P ${product_id} -V ${vendor_id}
+fi
+
+global.autoboot_timeout=16
+echo
+echo "enable tty over USB Device, increase the boot delay to ${global.autoboot_timeout}s"
+usbserial
diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
new file mode 100644
index 0000000..06e6508
--- /dev/null
+++ b/arch/arm/boards/telit-evk-pro3/init.c
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/armlinux.h>
+#include <common.h>
+#include <gpio.h>
+#include <init.h>
+#include <linux/clk.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/io.h>
+#include <nand.h>
+
+#define BOOTSTRAP_SIZE 0xC0000
+
+static struct atmel_nand_data nand_pdata = {
+ .ale = 21,
+ .cle = 22,
+ .det_pin = -EINVAL,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .on_flash_bbt = 1,
+};
+
+static struct sam9_smc_config evk_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static void evk_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(0, 3, &evk_nand_smc_config);
+
+ at91_add_device_nand(&nand_pdata);
+}
+
+static struct at91_ether_platform_data macb_pdata = {
+ .is_rmii = 1,
+ .phy_addr = 0,
+};
+
+static void evk_phy_reset(void)
+{
+ unsigned long rstc;
+ struct clk *clk = clk_get(NULL, "macb_clk");
+
+ clk_enable(clk);
+
+ at91_set_gpio_input(AT91_PIN_PA14, 0);
+ at91_set_gpio_input(AT91_PIN_PA15, 0);
+ at91_set_gpio_input(AT91_PIN_PA17, 0);
+ at91_set_gpio_input(AT91_PIN_PA25, 0);
+ at91_set_gpio_input(AT91_PIN_PA26, 0);
+ at91_set_gpio_input(AT91_PIN_PA28, 0);
+
+ rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+ /* Need to reset PHY -> 500ms reset */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ (AT91_RSTC_ERSTL & (0x0d << 8)) |
+ AT91_RSTC_URSTEN);
+
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+ /* Wait for end hardware reset */
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL))
+ ;
+
+ /* Restore NRST value */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ (rstc) |
+ AT91_RSTC_URSTEN);
+}
+
+/*
+ * MCI (SD/MMC)
+ */
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data __initdata evk_mci_data = {
+ .bus_width = 4,
+ .slot_b = 1,
+};
+
+static void evk_usb_add_device_mci(void)
+{
+ at91_add_device_mci(0, &evk_mci_data);
+}
+#else
+static void evk_usb_add_device_mci(void) {}
+#endif
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata evk_usbh_data = {
+ .ports = 2,
+ .vbus_pin = { -EINVAL, -EINVAL },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata evk_udc_data = {
+ .vbus_pin = AT91_PIN_PC4,
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
+};
+
+static int evk_mem_init(void)
+{
+ at91_add_device_sdram(0);
+
+ return 0;
+}
+mem_initcall(evk_mem_init);
+
+static int evk_devices_init(void)
+{
+ evk_add_device_nand();
+ evk_phy_reset();
+ at91_add_device_eth(0, &macb_pdata);
+ at91_add_device_usbh_ohci(&evk_usbh_data);
+ at91_add_device_udc(&evk_udc_data);
+ evk_usb_add_device_mci();
+
+ armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+
+ devfs_add_partition("nand0", 0x00000, BOOTSTRAP_SIZE,
+ DEVFS_PARTITION_FIXED, "bootstrap_raw");
+ dev_add_bb_dev("bootstrap_raw", "bootstrap");
+ devfs_add_partition("nand0", BOOTSTRAP_SIZE, SZ_256K,
+ DEVFS_PARTITION_FIXED, "self_raw");
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K, SZ_128K,
+ DEVFS_PARTITION_FIXED, "env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+ devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K + SZ_128K,
+ SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
+ dev_add_bb_dev("env_raw1", "env1");
+
+ return 0;
+}
+
+device_initcall(evk_devices_init);
+
+static int evk_console_init(void)
+{
+ at91_register_uart(0, 0);
+ return 0;
+}
+console_initcall(evk_console_init);
diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
new file mode 100644
index 0000000..050d176
--- /dev/null
+++ b/arch/arm/configs/telit_evk_pro3_defconfig
@@ -0,0 +1,73 @@
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_GE863=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_PROMPT="EVK-PRO3:"
+CONFIG_LONGHELP=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_CONSOLE_ACTIVATE_ALL=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/telit-evk-pro3/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_UBIFORMAT=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DFU=y
+CONFIG_USB_GADGET_SERIAL=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_ATMEL=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index fcba7fb..a319bd3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -46,6 +46,7 @@ config BOARDINFO
default "Calao TNY-A9263" if MACH_TNY_A9263
default "Calao TNY-A9G20" if MACH_TNY_A9G20
default "Calao QIL-A9260" if MACH_QIL_A9260
+ default "Telit EVK-PRO3" if MACH_GE863
config HAVE_NAND_ATMEL_BUSWIDTH_16
bool
@@ -235,6 +236,14 @@ config MACH_USB_A9260
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
+config MACH_GE863
+ bool "Telit EVK-PRO3"
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
+ help
+ Say y here if you are using Telit EVK-PRO3 with GE863-PRO3
+ <http://www.telit.com>
+
endchoice
endif
--
1.8.0.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-24 14:42 [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support Fabio Porcedda
@ 2013-01-24 15:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 10:49 ` Fabio Porcedda
2013-01-24 15:53 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 1 reply; 7+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-01-24 15:51 UTC (permalink / raw)
To: Fabio Porcedda; +Cc: barebox
> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
> new file mode 100644
> index 0000000..06e6508
> --- /dev/null
> +++ b/arch/arm/boards/telit-evk-pro3/init.c
> @@ -0,0 +1,178 @@
> +/*
> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/armlinux.h>
> +#include <common.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <linux/clk.h>
> +#include <mach/at91_rstc.h>
> +#include <mach/at91sam9_smc.h>
> +#include <mach/board.h>
> +#include <mach/io.h>
> +#include <nand.h>
> +
> +#define BOOTSTRAP_SIZE 0xC0000
this is really wired
on 9260 you have anly 4KiB of sram so you bootstrap will be 4KiB MAX
and as on 9260 the ROM code does not manage the bbt or even ECC correction
you just need to reserve the first block of the NAND for it
except this
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-24 14:42 [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support Fabio Porcedda
2013-01-24 15:51 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-01-24 15:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 10:40 ` Fabio Porcedda
1 sibling, 1 reply; 7+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-01-24 15:53 UTC (permalink / raw)
To: Fabio Porcedda; +Cc: barebox
> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
> diff --git a/arch/arm/boards/telit-evk-pro3/env/init/usb b/arch/arm/boards/telit-evk-pro3/env/init/usb
> new file mode 100644
> index 0000000..afa0416
> --- /dev/null
> +++ b/arch/arm/boards/telit-evk-pro3/env/init/usb
> @@ -0,0 +1,26 @@
> +#!/bin/sh
> +
> +# Uncomment the following line to enalbe dfu instead of usbserial
> +#dfu_enabled="y"
you have no gpio button you can use for this?
Best Regards,
J.
> +
> +product_id=0x1234
> +vendor_id=0x4321
> +
> +dfu_config="/dev/nand0.bootstrap.bb(bootstrap)sr,/dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.rootfs.bb(rootfs)r"
> +
> +if [ $at91_udc0.vbus != 1 ]; then
> + echo
> + echo "No USB Device cable plugged, normal boot"
> + exit
> +fi
> +
> +if [ -n $dfu_enabled ]; then
> + echo
> + echo "Start DFU Mode"
> + dfu ${dfu_config} -P ${product_id} -V ${vendor_id}
> +fi
> +
> +global.autoboot_timeout=16
> +echo
> +echo "enable tty over USB Device, increase the boot delay to ${global.autoboot_timeout}s"
> +usbserial
> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
> new file mode 100644
> index 0000000..06e6508
> --- /dev/null
> +++ b/arch/arm/boards/telit-evk-pro3/init.c
> @@ -0,0 +1,178 @@
> +/*
> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/armlinux.h>
> +#include <common.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <linux/clk.h>
> +#include <mach/at91_rstc.h>
> +#include <mach/at91sam9_smc.h>
> +#include <mach/board.h>
> +#include <mach/io.h>
> +#include <nand.h>
> +
> +#define BOOTSTRAP_SIZE 0xC0000
> +
> +static struct atmel_nand_data nand_pdata = {
> + .ale = 21,
> + .cle = 22,
> + .det_pin = -EINVAL,
> + .rdy_pin = AT91_PIN_PC13,
> + .enable_pin = AT91_PIN_PC14,
> + .on_flash_bbt = 1,
> +};
> +
> +static struct sam9_smc_config evk_nand_smc_config = {
> + .ncs_read_setup = 0,
> + .nrd_setup = 1,
> + .ncs_write_setup = 0,
> + .nwe_setup = 1,
> +
> + .ncs_read_pulse = 3,
> + .nrd_pulse = 3,
> + .ncs_write_pulse = 3,
> + .nwe_pulse = 3,
> +
> + .read_cycle = 5,
> + .write_cycle = 5,
> +
> + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
> + AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
> + .tdf_cycles = 2,
> +};
> +
> +static void evk_add_device_nand(void)
> +{
> + /* configure chip-select 3 (NAND) */
> + sam9_smc_configure(0, 3, &evk_nand_smc_config);
> +
> + at91_add_device_nand(&nand_pdata);
> +}
> +
> +static struct at91_ether_platform_data macb_pdata = {
> + .is_rmii = 1,
> + .phy_addr = 0,
> +};
> +
> +static void evk_phy_reset(void)
> +{
> + unsigned long rstc;
> + struct clk *clk = clk_get(NULL, "macb_clk");
> +
> + clk_enable(clk);
> +
> + at91_set_gpio_input(AT91_PIN_PA14, 0);
> + at91_set_gpio_input(AT91_PIN_PA15, 0);
> + at91_set_gpio_input(AT91_PIN_PA17, 0);
> + at91_set_gpio_input(AT91_PIN_PA25, 0);
> + at91_set_gpio_input(AT91_PIN_PA26, 0);
> + at91_set_gpio_input(AT91_PIN_PA28, 0);
> +
> + rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
> +
> + /* Need to reset PHY -> 500ms reset */
> + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> + (AT91_RSTC_ERSTL & (0x0d << 8)) |
> + AT91_RSTC_URSTEN);
> +
> + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
> +
> + /* Wait for end hardware reset */
> + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL))
> + ;
> +
> + /* Restore NRST value */
> + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> + (rstc) |
> + AT91_RSTC_URSTEN);
> +}
> +
> +/*
> + * MCI (SD/MMC)
> + */
> +#if defined(CONFIG_MCI_ATMEL)
> +static struct atmel_mci_platform_data __initdata evk_mci_data = {
> + .bus_width = 4,
> + .slot_b = 1,
> +};
> +
> +static void evk_usb_add_device_mci(void)
> +{
> + at91_add_device_mci(0, &evk_mci_data);
> +}
> +#else
> +static void evk_usb_add_device_mci(void) {}
> +#endif
> +
> +/*
> + * USB Host port
> + */
> +static struct at91_usbh_data __initdata evk_usbh_data = {
> + .ports = 2,
> + .vbus_pin = { -EINVAL, -EINVAL },
> +};
> +
> +/*
> + * USB Device port
> + */
> +static struct at91_udc_data __initdata evk_udc_data = {
> + .vbus_pin = AT91_PIN_PC4,
> + .pullup_pin = -EINVAL, /* pull-up driven by UDC */
> +};
> +
> +static int evk_mem_init(void)
> +{
> + at91_add_device_sdram(0);
> +
> + return 0;
> +}
> +mem_initcall(evk_mem_init);
> +
> +static int evk_devices_init(void)
> +{
> + evk_add_device_nand();
> + evk_phy_reset();
> + at91_add_device_eth(0, &macb_pdata);
> + at91_add_device_usbh_ohci(&evk_usbh_data);
> + at91_add_device_udc(&evk_udc_data);
> + evk_usb_add_device_mci();
> +
> + armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
> +
> + devfs_add_partition("nand0", 0x00000, BOOTSTRAP_SIZE,
> + DEVFS_PARTITION_FIXED, "bootstrap_raw");
> + dev_add_bb_dev("bootstrap_raw", "bootstrap");
> + devfs_add_partition("nand0", BOOTSTRAP_SIZE, SZ_256K,
> + DEVFS_PARTITION_FIXED, "self_raw");
> + dev_add_bb_dev("self_raw", "self0");
> + devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K, SZ_128K,
> + DEVFS_PARTITION_FIXED, "env_raw");
> + dev_add_bb_dev("env_raw", "env0");
> + devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K + SZ_128K,
> + SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
> + dev_add_bb_dev("env_raw1", "env1");
> +
> + return 0;
> +}
> +
> +device_initcall(evk_devices_init);
> +
> +static int evk_console_init(void)
> +{
> + at91_register_uart(0, 0);
> + return 0;
> +}
> +console_initcall(evk_console_init);
> diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
> new file mode 100644
> index 0000000..050d176
> --- /dev/null
> +++ b/arch/arm/configs/telit_evk_pro3_defconfig
> @@ -0,0 +1,73 @@
> +CONFIG_ARCH_AT91SAM9260=y
> +CONFIG_MACH_GE863=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
> +CONFIG_AEABI=y
> +# CONFIG_CMD_ARM_CPUINFO is not set
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_MMU=y
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_PROMPT="EVK-PRO3:"
> +CONFIG_LONGHELP=y
> +CONFIG_PROMPT_HUSH_PS2="y"
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_CONSOLE_ACTIVATE_ALL=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/telit-evk-pro3/env"
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TFTP=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_UBIFORMAT=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_BOOTM_INITRD=y
> +CONFIG_CMD_BOOTM_OFTREE=y
> +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
> +CONFIG_CMD_UIMAGE=y
> +# CONFIG_CMD_BOOTU is not set
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_MTEST_ALTERNATIVE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_LED=y
> +CONFIG_CMD_LED_TRIGGER=y
> +CONFIG_NET=y
> +CONFIG_NET_DHCP=y
> +CONFIG_NET_NFS=y
> +CONFIG_NET_PING=y
> +CONFIG_NET_NETCONSOLE=y
> +CONFIG_DRIVER_NET_MACB=y
> +# CONFIG_SPI is not set
> +CONFIG_MTD=y
> +# CONFIG_MTD_OOB_DEVICE is not set
> +CONFIG_NAND=y
> +# CONFIG_NAND_ECC_HW is not set
> +# CONFIG_NAND_ECC_HW_SYNDROME is not set
> +# CONFIG_NAND_ECC_HW_NONE is not set
> +CONFIG_NAND_ATMEL=y
> +CONFIG_UBI=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DFU=y
> +CONFIG_USB_GADGET_SERIAL=y
> +CONFIG_MCI=y
> +CONFIG_MCI_STARTUP=y
> +CONFIG_MCI_ATMEL=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_LED_TRIGGERS=y
> +CONFIG_FS_TFTP=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_LFN=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index fcba7fb..a319bd3 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -46,6 +46,7 @@ config BOARDINFO
> default "Calao TNY-A9263" if MACH_TNY_A9263
> default "Calao TNY-A9G20" if MACH_TNY_A9G20
> default "Calao QIL-A9260" if MACH_QIL_A9260
> + default "Telit EVK-PRO3" if MACH_GE863
>
> config HAVE_NAND_ATMEL_BUSWIDTH_16
> bool
> @@ -235,6 +236,14 @@ config MACH_USB_A9260
> Select this if you are using a Calao Systems USB-A9260.
> <http://www.calao-systems.com>
>
> +config MACH_GE863
> + bool "Telit EVK-PRO3"
> + select HAVE_NAND_ATMEL_BUSWIDTH_16
> + select HAVE_DEFAULT_ENVIRONMENT_NEW
> + help
> + Say y here if you are using Telit EVK-PRO3 with GE863-PRO3
> + <http://www.telit.com>
> +
> endchoice
>
> endif
> --
> 1.8.0.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-24 15:53 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-01-25 10:40 ` Fabio Porcedda
0 siblings, 0 replies; 7+ messages in thread
From: Fabio Porcedda @ 2013-01-25 10:40 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Thu, Jan 24, 2013 at 4:53 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
>> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
>> diff --git a/arch/arm/boards/telit-evk-pro3/env/init/usb b/arch/arm/boards/telit-evk-pro3/env/init/usb
>> new file mode 100644
>> index 0000000..afa0416
>> --- /dev/null
>> +++ b/arch/arm/boards/telit-evk-pro3/env/init/usb
>> @@ -0,0 +1,26 @@
>> +#!/bin/sh
>> +
>> +# Uncomment the following line to enalbe dfu instead of usbserial
>> +#dfu_enabled="y"
> you have no gpio button you can use for this?
I don't have a gpio button, but I will use a free gpio to do that.
I will send a patch v4.
> Best Regards,
> J.
>> +
>> +product_id=0x1234
>> +vendor_id=0x4321
>> +
>> +dfu_config="/dev/nand0.bootstrap.bb(bootstrap)sr,/dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.rootfs.bb(rootfs)r"
>> +
>> +if [ $at91_udc0.vbus != 1 ]; then
>> + echo
>> + echo "No USB Device cable plugged, normal boot"
>> + exit
>> +fi
>> +
>> +if [ -n $dfu_enabled ]; then
>> + echo
>> + echo "Start DFU Mode"
>> + dfu ${dfu_config} -P ${product_id} -V ${vendor_id}
>> +fi
>> +
>> +global.autoboot_timeout=16
>> +echo
>> +echo "enable tty over USB Device, increase the boot delay to ${global.autoboot_timeout}s"
>> +usbserial
>> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
>> new file mode 100644
>> index 0000000..06e6508
>> --- /dev/null
>> +++ b/arch/arm/boards/telit-evk-pro3/init.c
>> @@ -0,0 +1,178 @@
>> +/*
>> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
>> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <asm/armlinux.h>
>> +#include <common.h>
>> +#include <gpio.h>
>> +#include <init.h>
>> +#include <linux/clk.h>
>> +#include <mach/at91_rstc.h>
>> +#include <mach/at91sam9_smc.h>
>> +#include <mach/board.h>
>> +#include <mach/io.h>
>> +#include <nand.h>
>> +
>> +#define BOOTSTRAP_SIZE 0xC0000
>> +
>> +static struct atmel_nand_data nand_pdata = {
>> + .ale = 21,
>> + .cle = 22,
>> + .det_pin = -EINVAL,
>> + .rdy_pin = AT91_PIN_PC13,
>> + .enable_pin = AT91_PIN_PC14,
>> + .on_flash_bbt = 1,
>> +};
>> +
>> +static struct sam9_smc_config evk_nand_smc_config = {
>> + .ncs_read_setup = 0,
>> + .nrd_setup = 1,
>> + .ncs_write_setup = 0,
>> + .nwe_setup = 1,
>> +
>> + .ncs_read_pulse = 3,
>> + .nrd_pulse = 3,
>> + .ncs_write_pulse = 3,
>> + .nwe_pulse = 3,
>> +
>> + .read_cycle = 5,
>> + .write_cycle = 5,
>> +
>> + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
>> + AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
>> + .tdf_cycles = 2,
>> +};
>> +
>> +static void evk_add_device_nand(void)
>> +{
>> + /* configure chip-select 3 (NAND) */
>> + sam9_smc_configure(0, 3, &evk_nand_smc_config);
>> +
>> + at91_add_device_nand(&nand_pdata);
>> +}
>> +
>> +static struct at91_ether_platform_data macb_pdata = {
>> + .is_rmii = 1,
>> + .phy_addr = 0,
>> +};
>> +
>> +static void evk_phy_reset(void)
>> +{
>> + unsigned long rstc;
>> + struct clk *clk = clk_get(NULL, "macb_clk");
>> +
>> + clk_enable(clk);
>> +
>> + at91_set_gpio_input(AT91_PIN_PA14, 0);
>> + at91_set_gpio_input(AT91_PIN_PA15, 0);
>> + at91_set_gpio_input(AT91_PIN_PA17, 0);
>> + at91_set_gpio_input(AT91_PIN_PA25, 0);
>> + at91_set_gpio_input(AT91_PIN_PA26, 0);
>> + at91_set_gpio_input(AT91_PIN_PA28, 0);
>> +
>> + rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
>> +
>> + /* Need to reset PHY -> 500ms reset */
>> + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
>> + (AT91_RSTC_ERSTL & (0x0d << 8)) |
>> + AT91_RSTC_URSTEN);
>> +
>> + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
>> +
>> + /* Wait for end hardware reset */
>> + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL))
>> + ;
>> +
>> + /* Restore NRST value */
>> + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
>> + (rstc) |
>> + AT91_RSTC_URSTEN);
>> +}
>> +
>> +/*
>> + * MCI (SD/MMC)
>> + */
>> +#if defined(CONFIG_MCI_ATMEL)
>> +static struct atmel_mci_platform_data __initdata evk_mci_data = {
>> + .bus_width = 4,
>> + .slot_b = 1,
>> +};
>> +
>> +static void evk_usb_add_device_mci(void)
>> +{
>> + at91_add_device_mci(0, &evk_mci_data);
>> +}
>> +#else
>> +static void evk_usb_add_device_mci(void) {}
>> +#endif
>> +
>> +/*
>> + * USB Host port
>> + */
>> +static struct at91_usbh_data __initdata evk_usbh_data = {
>> + .ports = 2,
>> + .vbus_pin = { -EINVAL, -EINVAL },
>> +};
>> +
>> +/*
>> + * USB Device port
>> + */
>> +static struct at91_udc_data __initdata evk_udc_data = {
>> + .vbus_pin = AT91_PIN_PC4,
>> + .pullup_pin = -EINVAL, /* pull-up driven by UDC */
>> +};
>> +
>> +static int evk_mem_init(void)
>> +{
>> + at91_add_device_sdram(0);
>> +
>> + return 0;
>> +}
>> +mem_initcall(evk_mem_init);
>> +
>> +static int evk_devices_init(void)
>> +{
>> + evk_add_device_nand();
>> + evk_phy_reset();
>> + at91_add_device_eth(0, &macb_pdata);
>> + at91_add_device_usbh_ohci(&evk_usbh_data);
>> + at91_add_device_udc(&evk_udc_data);
>> + evk_usb_add_device_mci();
>> +
>> + armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
>> +
>> + devfs_add_partition("nand0", 0x00000, BOOTSTRAP_SIZE,
>> + DEVFS_PARTITION_FIXED, "bootstrap_raw");
>> + dev_add_bb_dev("bootstrap_raw", "bootstrap");
>> + devfs_add_partition("nand0", BOOTSTRAP_SIZE, SZ_256K,
>> + DEVFS_PARTITION_FIXED, "self_raw");
>> + dev_add_bb_dev("self_raw", "self0");
>> + devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K, SZ_128K,
>> + DEVFS_PARTITION_FIXED, "env_raw");
>> + dev_add_bb_dev("env_raw", "env0");
>> + devfs_add_partition("nand0", BOOTSTRAP_SIZE + SZ_256K + SZ_128K,
>> + SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
>> + dev_add_bb_dev("env_raw1", "env1");
>> +
>> + return 0;
>> +}
>> +
>> +device_initcall(evk_devices_init);
>> +
>> +static int evk_console_init(void)
>> +{
>> + at91_register_uart(0, 0);
>> + return 0;
>> +}
>> +console_initcall(evk_console_init);
>> diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
>> new file mode 100644
>> index 0000000..050d176
>> --- /dev/null
>> +++ b/arch/arm/configs/telit_evk_pro3_defconfig
>> @@ -0,0 +1,73 @@
>> +CONFIG_ARCH_AT91SAM9260=y
>> +CONFIG_MACH_GE863=y
>> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
>> +CONFIG_AEABI=y
>> +# CONFIG_CMD_ARM_CPUINFO is not set
>> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
>> +CONFIG_PBL_IMAGE=y
>> +CONFIG_MMU=y
>> +CONFIG_EXPERIMENTAL=y
>> +CONFIG_PROMPT="EVK-PRO3:"
>> +CONFIG_LONGHELP=y
>> +CONFIG_PROMPT_HUSH_PS2="y"
>> +CONFIG_HUSH_FANCY_PROMPT=y
>> +CONFIG_CMDLINE_EDITING=y
>> +CONFIG_AUTO_COMPLETE=y
>> +CONFIG_CONSOLE_ACTIVATE_ALL=y
>> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
>> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/telit-evk-pro3/env"
>> +CONFIG_CMD_EDIT=y
>> +CONFIG_CMD_SLEEP=y
>> +CONFIG_CMD_SAVEENV=y
>> +CONFIG_CMD_EXPORT=y
>> +CONFIG_CMD_PRINTENV=y
>> +CONFIG_CMD_READLINE=y
>> +CONFIG_CMD_TFTP=y
>> +CONFIG_CMD_ECHO_E=y
>> +CONFIG_CMD_LOADB=y
>> +CONFIG_CMD_MEMINFO=y
>> +CONFIG_CMD_FLASH=y
>> +CONFIG_CMD_UBIFORMAT=y
>> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
>> +CONFIG_CMD_BOOTM_INITRD=y
>> +CONFIG_CMD_BOOTM_OFTREE=y
>> +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
>> +CONFIG_CMD_UIMAGE=y
>> +# CONFIG_CMD_BOOTU is not set
>> +CONFIG_CMD_RESET=y
>> +CONFIG_CMD_GO=y
>> +CONFIG_CMD_OFTREE=y
>> +CONFIG_CMD_MTEST=y
>> +CONFIG_CMD_MTEST_ALTERNATIVE=y
>> +CONFIG_CMD_TIMEOUT=y
>> +CONFIG_CMD_PARTITION=y
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_LED=y
>> +CONFIG_CMD_LED_TRIGGER=y
>> +CONFIG_NET=y
>> +CONFIG_NET_DHCP=y
>> +CONFIG_NET_NFS=y
>> +CONFIG_NET_PING=y
>> +CONFIG_NET_NETCONSOLE=y
>> +CONFIG_DRIVER_NET_MACB=y
>> +# CONFIG_SPI is not set
>> +CONFIG_MTD=y
>> +# CONFIG_MTD_OOB_DEVICE is not set
>> +CONFIG_NAND=y
>> +# CONFIG_NAND_ECC_HW is not set
>> +# CONFIG_NAND_ECC_HW_SYNDROME is not set
>> +# CONFIG_NAND_ECC_HW_NONE is not set
>> +CONFIG_NAND_ATMEL=y
>> +CONFIG_UBI=y
>> +CONFIG_USB_GADGET=y
>> +CONFIG_USB_GADGET_DFU=y
>> +CONFIG_USB_GADGET_SERIAL=y
>> +CONFIG_MCI=y
>> +CONFIG_MCI_STARTUP=y
>> +CONFIG_MCI_ATMEL=y
>> +CONFIG_LED=y
>> +CONFIG_LED_GPIO=y
>> +CONFIG_LED_TRIGGERS=y
>> +CONFIG_FS_TFTP=y
>> +CONFIG_FS_FAT=y
>> +CONFIG_FS_FAT_LFN=y
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index fcba7fb..a319bd3 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -46,6 +46,7 @@ config BOARDINFO
>> default "Calao TNY-A9263" if MACH_TNY_A9263
>> default "Calao TNY-A9G20" if MACH_TNY_A9G20
>> default "Calao QIL-A9260" if MACH_QIL_A9260
>> + default "Telit EVK-PRO3" if MACH_GE863
>>
>> config HAVE_NAND_ATMEL_BUSWIDTH_16
>> bool
>> @@ -235,6 +236,14 @@ config MACH_USB_A9260
>> Select this if you are using a Calao Systems USB-A9260.
>> <http://www.calao-systems.com>
>>
>> +config MACH_GE863
>> + bool "Telit EVK-PRO3"
>> + select HAVE_NAND_ATMEL_BUSWIDTH_16
>> + select HAVE_DEFAULT_ENVIRONMENT_NEW
>> + help
>> + Say y here if you are using Telit EVK-PRO3 with GE863-PRO3
>> + <http://www.telit.com>
>> +
>> endchoice
>>
>> endif
>> --
>> 1.8.0.3
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
--
Fabio Porcedda
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-24 15:51 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-01-25 10:49 ` Fabio Porcedda
2013-01-25 11:47 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 7+ messages in thread
From: Fabio Porcedda @ 2013-01-25 10:49 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Thu, Jan 24, 2013 at 4:51 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
>> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
>> new file mode 100644
>> index 0000000..06e6508
>> --- /dev/null
>> +++ b/arch/arm/boards/telit-evk-pro3/init.c
>> @@ -0,0 +1,178 @@
>> +/*
>> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
>> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <asm/armlinux.h>
>> +#include <common.h>
>> +#include <gpio.h>
>> +#include <init.h>
>> +#include <linux/clk.h>
>> +#include <mach/at91_rstc.h>
>> +#include <mach/at91sam9_smc.h>
>> +#include <mach/board.h>
>> +#include <mach/io.h>
>> +#include <nand.h>
>> +
>> +#define BOOTSTRAP_SIZE 0xC0000
> this is really wired
>
> on 9260 you have anly 4KiB of sram so you bootstrap will be 4KiB MAX
>
> and as on 9260 the ROM code does not manage the bbt or even ECC correction
>
> you just need to reserve the first block of the NAND for it
You are right, but right now I can only use the Telit Official Bootstrap binary,
so I must use that address because is the address used by the original
bootstrap binary.
To be able to use another address I want to port the Barebox AT91
Bootstrap or AT91Bootstrap.
Do you think is difficult to add support to the at91sam9260ek for
Barebox AT91 Bootstrap?
> except this
>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>
> Best Regards,
> J.
Best regards and thanks for reviewing.
--
Fabio Porcedda
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-25 10:49 ` Fabio Porcedda
@ 2013-01-25 11:47 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 12:30 ` Fabio Porcedda
0 siblings, 1 reply; 7+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-01-25 11:47 UTC (permalink / raw)
To: Fabio Porcedda; +Cc: barebox
On 11:49 Fri 25 Jan , Fabio Porcedda wrote:
> On Thu, Jan 24, 2013 at 4:51 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> >> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
> >> new file mode 100644
> >> index 0000000..06e6508
> >> --- /dev/null
> >> +++ b/arch/arm/boards/telit-evk-pro3/init.c
> >> @@ -0,0 +1,178 @@
> >> +/*
> >> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
> >> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License as
> >> + * published by the Free Software Foundation; either version 2 of
> >> + * the License, or (at your option) any later version.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <asm/armlinux.h>
> >> +#include <common.h>
> >> +#include <gpio.h>
> >> +#include <init.h>
> >> +#include <linux/clk.h>
> >> +#include <mach/at91_rstc.h>
> >> +#include <mach/at91sam9_smc.h>
> >> +#include <mach/board.h>
> >> +#include <mach/io.h>
> >> +#include <nand.h>
> >> +
> >> +#define BOOTSTRAP_SIZE 0xC0000
> > this is really wired
> >
> > on 9260 you have anly 4KiB of sram so you bootstrap will be 4KiB MAX
> >
> > and as on 9260 the ROM code does not manage the bbt or even ECC correction
> >
> > you just need to reserve the first block of the NAND for it
>
>
> You are right, but right now I can only use the Telit Official Bootstrap binary,
> so I must use that address because is the address used by the original
> bootstrap binary.
>
> To be able to use another address I want to port the Barebox AT91
> Bootstrap or AT91Bootstrap.
> Do you think is difficult to add support to the at91sam9260ek for
> Barebox AT91 Bootstrap?
it's impossible you have anly 4KiB on the 9260
the minimal size of the boostrap is 20KiB on dataflash
on nand it's 30KiB
that's why we implement on other code to do this
Best Regards,
J.
>
> > except this
> >
> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> >
> > Best Regards,
> > J.
>
> Best regards and thanks for reviewing.
> --
> Fabio Porcedda
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support
2013-01-25 11:47 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-01-25 12:30 ` Fabio Porcedda
0 siblings, 0 replies; 7+ messages in thread
From: Fabio Porcedda @ 2013-01-25 12:30 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Fri, Jan 25, 2013 at 12:47 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> On 11:49 Fri 25 Jan , Fabio Porcedda wrote:
>> On Thu, Jan 24, 2013 at 4:51 PM, Jean-Christophe PLAGNIOL-VILLARD
>> <plagnioj@jcrosoft.com> wrote:
>> >> diff --git a/arch/arm/boards/telit-evk-pro3/init.c b/arch/arm/boards/telit-evk-pro3/init.c
>> >> new file mode 100644
>> >> index 0000000..06e6508
>> >> --- /dev/null
>> >> +++ b/arch/arm/boards/telit-evk-pro3/init.c
>> >> @@ -0,0 +1,178 @@
>> >> +/*
>> >> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
>> >> + * Copyright (C) 2013 Fabio Porcedda <fabio.porcedda@gmail.com>, Telit
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or
>> >> + * modify it under the terms of the GNU General Public License as
>> >> + * published by the Free Software Foundation; either version 2 of
>> >> + * the License, or (at your option) any later version.
>> >> + *
>> >> + * This program is distributed in the hope that it will be useful,
>> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> >> + * GNU General Public License for more details.
>> >> + */
>> >> +
>> >> +#include <asm/armlinux.h>
>> >> +#include <common.h>
>> >> +#include <gpio.h>
>> >> +#include <init.h>
>> >> +#include <linux/clk.h>
>> >> +#include <mach/at91_rstc.h>
>> >> +#include <mach/at91sam9_smc.h>
>> >> +#include <mach/board.h>
>> >> +#include <mach/io.h>
>> >> +#include <nand.h>
>> >> +
>> >> +#define BOOTSTRAP_SIZE 0xC0000
>> > this is really wired
>> >
>> > on 9260 you have anly 4KiB of sram so you bootstrap will be 4KiB MAX
>> >
>> > and as on 9260 the ROM code does not manage the bbt or even ECC correction
>> >
>> > you just need to reserve the first block of the NAND for it
>>
>>
>> You are right, but right now I can only use the Telit Official Bootstrap binary,
>> so I must use that address because is the address used by the original
>> bootstrap binary.
>>
>> To be able to use another address I want to port the Barebox AT91
>> Bootstrap or AT91Bootstrap.
>> Do you think is difficult to add support to the at91sam9260ek for
>> Barebox AT91 Bootstrap?
> it's impossible you have anly 4KiB on the 9260
> the minimal size of the boostrap is 20KiB on dataflash
> on nand it's 30KiB
>
> that's why we implement on other code to do this
Ok I understand.
So I have no other option. I will try to port the AT91Bootstrap.
Best regards
Fabio Porcedda
> Best Regards,
> J.
>>
>> > except this
>> >
>> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>> >
>> > Best Regards,
>> > J.
>>
>> Best regards and thanks for reviewing.
>> --
>> Fabio Porcedda
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-01-25 12:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-24 14:42 [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support Fabio Porcedda
2013-01-24 15:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 10:49 ` Fabio Porcedda
2013-01-25 11:47 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 12:30 ` Fabio Porcedda
2013-01-24 15:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 10:40 ` Fabio Porcedda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox