mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 0/2] at91: add atmel at91sam9m10ihd tabel support
Date: Fri, 25 Jan 2013 18:36:34 +0100	[thread overview]
Message-ID: <20130125173634.GN1906@pengutronix.de> (raw)
In-Reply-To: <20130123225007.GT26329@game.jcrosoft.org>

On Wed, Jan 23, 2013 at 11:50:07PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> HI,
> 
> 	add the sam9m10ihd support
> 
> 	It's a tablet based on a sam9m10 with a maxtouch
> 
> The following changes since commit 6d588b9bfd85247f9007c002cec98a7535764ae4:
> 
>   Merge branch 'for-next/misc' into next (2013-01-23 20:46:17 +0100)
> 
> are available in the git repository at:
> 
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91sam9m10ihd

Applied, thanks

Sascha

> 
> for you to fetch changes up to 1ae65c31d5530ba28d0ff03d75654e36509e56e7:
> 
>   at91: add at91sam9m10ihd tablet support (2013-01-20 01:27:23 +0800)
> 
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (2):
>       at91sam9m10g45ek/defconfig: set board type
>       at91: add at91sam9m10ihd tablet support
> 
>  arch/arm/Makefile                                           |    1 +
>  arch/arm/boards/at91sam9m10ihd/Makefile                     |    2 +
>  arch/arm/boards/at91sam9m10ihd/config.h                     |    6 +++
>  arch/arm/boards/at91sam9m10ihd/env/boot/android             |   11 ++++++
>  arch/arm/boards/at91sam9m10ihd/env/boot/mmc                 |   19 ++++++++++
>  arch/arm/boards/at91sam9m10ihd/env/boot/net                 |   16 ++++++++
>  arch/arm/boards/at91sam9m10ihd/env/boot/net-usb             |   22 +++++++++++
>  arch/arm/boards/at91sam9m10ihd/env/config                   |   21 +++++++++++
>  arch/arm/boards/at91sam9m10ihd/env/init/automount           |   17 +++++++++
>  arch/arm/boards/at91sam9m10ihd/env/init/config-board        |    8 ++++
>  arch/arm/boards/at91sam9m10ihd/env/init/mtdparts-001-nand   |   11 ++++++
>  arch/arm/boards/at91sam9m10ihd/env/init/mtdparts-002-m25p80 |   11 ++++++
>  arch/arm/boards/at91sam9m10ihd/env/init/ps1                 |    9 +++++
>  arch/arm/boards/at91sam9m10ihd/hw_version.c                 |  216 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/boards/at91sam9m10ihd/hw_version.h                 |   31 +++++++++++++++
>  arch/arm/boards/at91sam9m10ihd/init.c                       |  220 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/configs/at91sam9m10g45ek_defconfig                 |    1 +
>  arch/arm/configs/at91sam9m10ihd_defconfig                   |   94 ++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-at91/Kconfig                                  |    6 +++
>  19 files changed, 722 insertions(+)
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/Makefile
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/config.h
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/boot/android
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/boot/mmc
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/boot/net
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/boot/net-usb
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/config
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/automount
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/config-board
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/mtdparts-001-nand
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/mtdparts-002-m25p80
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/env/init/ps1
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/hw_version.c
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/hw_version.h
>  create mode 100644 arch/arm/boards/at91sam9m10ihd/init.c
>  create mode 100644 arch/arm/configs/at91sam9m10ihd_defconfig
> 
> Best Regards,
> J.
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2013-01-25 17:36 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-23 22:50 Jean-Christophe PLAGNIOL-VILLARD
2013-01-23 22:52 ` [PATCH 1/2] at91sam9m10g45ek/defconfig: set board type Jean-Christophe PLAGNIOL-VILLARD
2013-01-23 22:52   ` [PATCH 2/2] at91: add at91sam9m10ihd tablet support Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 17:36 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130125173634.GN1906@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox