From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/1] arm: rename reset and common_reset to barebox_arm_reset_vector and arm_cpu_lowlevel_init
Date: Wed, 6 Feb 2013 20:44:59 +0100 [thread overview]
Message-ID: <20130206194459.GN1906@pengutronix.de> (raw)
In-Reply-To: <1360071926-16517-1-git-send-email-plagnioj@jcrosoft.com>
On Tue, Feb 05, 2013 at 02:45:26PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> reset is confusing with the cpu reset and impossible to grep
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Since this contains function renames only I decided to apply this on the
master branch to avoid conflicts in the next branch.
Sascha
> ---
> arch/arm/boards/a9m2410/lowlevel_init.S | 8 ++++----
> arch/arm/boards/a9m2440/lowlevel_init.S | 8 ++++----
> arch/arm/boards/archosg9/lowlevel.c | 4 ++--
> arch/arm/boards/beagle/lowlevel.c | 4 ++--
> arch/arm/boards/beaglebone/lowlevel.c | 4 ++--
> arch/arm/boards/ccxmx51/lowlevel.c | 4 ++--
> arch/arm/boards/chumby_falconwing/lowlevel.c | 4 ++--
> arch/arm/boards/clep7212/lowlevel.c | 4 ++--
> arch/arm/boards/crystalfontz-cfa10036/lowlevel.c | 4 ++--
> arch/arm/boards/efika-mx-smartbook/lowlevel.c | 4 ++--
> arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 4 ++--
> arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S | 6 +++---
> arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 4 ++--
> arch/arm/boards/eukrea_cpuimx51/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx23-evk/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx25-3-stack/lowlevel_init.S | 6 +++---
> arch/arm/boards/freescale-mx28-evk/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S | 6 +++---
> arch/arm/boards/freescale-mx51-pdk/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx53-loco/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx53-smd/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx6-arm2/lowlevel.c | 4 ++--
> arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c | 4 ++--
> arch/arm/boards/friendlyarm-mini2440/lowlevel_init.S | 8 ++++----
> arch/arm/boards/friendlyarm-mini6410/lowlevel.c | 4 ++--
> arch/arm/boards/friendlyarm-tiny210/lowlevel.c | 4 ++--
> arch/arm/boards/friendlyarm-tiny6410/lowlevel.c | 4 ++--
> arch/arm/boards/guf-cupid/lowlevel.c | 4 ++--
> arch/arm/boards/guf-neso/lowlevel.c | 4 ++--
> arch/arm/boards/guf-vincell/lowlevel.c | 4 ++--
> arch/arm/boards/imx21ads/lowlevel_init.S | 6 +++---
> arch/arm/boards/imx233-olinuxino/lowlevel.c | 4 ++--
> arch/arm/boards/imx27ads/lowlevel_init.S | 6 +++---
> arch/arm/boards/karo-tx25/lowlevel.c | 4 ++--
> arch/arm/boards/karo-tx28/lowlevel.c | 4 ++--
> arch/arm/boards/karo-tx51/lowlevel.c | 4 ++--
> arch/arm/boards/karo-tx53/lowlevel.c | 4 ++--
> arch/arm/boards/mioa701/lowlevel.c | 4 ++--
> arch/arm/boards/netx/platform.S | 6 +++---
> arch/arm/boards/nhk8815/lowlevel.c | 4 ++--
> arch/arm/boards/omap343xdsp/lowlevel.c | 4 ++--
> arch/arm/boards/omap3evm/lowlevel.c | 4 ++--
> arch/arm/boards/panda/lowlevel.c | 4 ++--
> arch/arm/boards/pcm027/lowlevel_init.S | 6 +++---
> arch/arm/boards/pcm037/lowlevel.c | 4 ++--
> arch/arm/boards/pcm038/lowlevel.c | 4 ++--
> arch/arm/boards/pcm043/lowlevel.c | 4 ++--
> arch/arm/boards/pcm049/lowlevel.c | 4 ++--
> arch/arm/boards/pcm051/lowlevel.c | 4 ++--
> arch/arm/boards/phycard-a-l1/lowlevel.c | 4 ++--
> arch/arm/boards/phycard-a-xl2/lowlevel.c | 4 ++--
> arch/arm/boards/phycard-i.MX27/lowlevel_init.S | 6 +++---
> arch/arm/boards/raspberry-pi/lowlevel.c | 4 ++--
> arch/arm/boards/scb9328/lowlevel_init.S | 6 +++---
> arch/arm/boards/toshiba-ac100/lowlevel.c | 4 ++--
> arch/arm/boards/tqma53/lowlevel.c | 4 ++--
> arch/arm/boards/versatile/lowlevel.c | 4 ++--
> arch/arm/cpu/exceptions.S | 2 +-
> arch/arm/include/asm/barebox-arm-head.h | 8 ++++----
> arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9g45_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9n12_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/at91sam9x5_lowlevel_init.c | 4 ++--
> arch/arm/mach-at91/include/mach/barebox-arm-head.h | 2 +-
> arch/arm/mach-at91/sama5d3_lowlevel_init.c | 4 ++--
> arch/arm/mach-ep93xx/lowlevel_init.S | 6 +++---
> arch/arm/mach-imx/include/mach/imx-flash-header.h | 4 ++--
> 70 files changed, 156 insertions(+), 156 deletions(-)
>
> diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S
> index 178e73a..07167dc 100644
> --- a/arch/arm/boards/a9m2410/lowlevel_init.S
> +++ b/arch/arm/boards/a9m2410/lowlevel_init.S
> @@ -7,12 +7,12 @@
> #include <mach/s3c-iomap.h>
> #include <asm/barebox-arm-head.h>
>
> - .section ".text_bare_init.reset","ax"
> + .section ".text_bare_init.barebox_arm_reset_vector","ax"
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> bl s3c24x0_disable_wd
>
> diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
> index bd51717..50443af 100644
> --- a/arch/arm/boards/a9m2440/lowlevel_init.S
> +++ b/arch/arm/boards/a9m2440/lowlevel_init.S
> @@ -8,7 +8,7 @@
> #include <mach/s3c24xx-gpio.h>
> #include <asm/barebox-arm-head.h>
>
> - .section ".text_bare_init.reset","ax"
> + .section ".text_bare_init.barebox_arm_reset_vector","ax"
>
> /*
> * To be able to setup the SDRAM interface correctly, we need some
> @@ -213,10 +213,10 @@ SDRAMDATA:
>
> /* ------------------------------------------------------------------------ */
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> bl s3c24x0_disable_wd
>
> diff --git a/arch/arm/boards/archosg9/lowlevel.c b/arch/arm/boards/archosg9/lowlevel.c
> index 26808f6..552268f 100644
> --- a/arch/arm/boards/archosg9/lowlevel.c
> +++ b/arch/arm/boards/archosg9/lowlevel.c
> @@ -67,9 +67,9 @@ static noinline void archosg9_init_lowlevel(void)
> barebox_arm_entry(0x80000000, SZ_1G, 0);
> }
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(0x4030d000);
>
> diff --git a/arch/arm/boards/beagle/lowlevel.c b/arch/arm/boards/beagle/lowlevel.c
> index c0abbe8..8afcb75 100644
> --- a/arch/arm/boards/beagle/lowlevel.c
> +++ b/arch/arm/boards/beagle/lowlevel.c
> @@ -167,11 +167,11 @@ static int beagle_board_init(void)
> return 0;
> }
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> omap3_invalidate_dcache();
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> beagle_board_init();
>
> diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
> index b565c74..76ac90b 100644
> --- a/arch/arm/boards/beaglebone/lowlevel.c
> +++ b/arch/arm/boards/beaglebone/lowlevel.c
> @@ -248,9 +248,9 @@ static int beaglebone_board_init(void)
> return 0;
> }
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> beaglebone_board_init();
>
> diff --git a/arch/arm/boards/ccxmx51/lowlevel.c b/arch/arm/boards/ccxmx51/lowlevel.c
> index 282024e..3e6a0ee 100644
> --- a/arch/arm/boards/ccxmx51/lowlevel.c
> +++ b/arch/arm/boards/ccxmx51/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx51_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/chumby_falconwing/lowlevel.c b/arch/arm/boards/chumby_falconwing/lowlevel.c
> index df28ad4..c23a12d 100644
> --- a/arch/arm/boards/chumby_falconwing/lowlevel.c
> +++ b/arch/arm/boards/chumby_falconwing/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx23-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, 0);
> }
> diff --git a/arch/arm/boards/clep7212/lowlevel.c b/arch/arm/boards/clep7212/lowlevel.c
> index 7465a42..b4d1bf1 100644
> --- a/arch/arm/boards/clep7212/lowlevel.c
> +++ b/arch/arm/boards/clep7212/lowlevel.c
> @@ -24,11 +24,11 @@
> #define PLL_VALUE (((CPU_SPEED * 2) / MAIN_CLOCK) << 24)
> #define SDRAM_REFRESH_RATE (64 * (BUS_SPEED / (8192 * 1000)))
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> u32 tmp;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* Setup base clock */
> writel(SYSCON3_CLKCTL0 | SYSCON3_CLKCTL1, SYSCON3);
> diff --git a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
> index 467194f..f7b9033 100644
> --- a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
> +++ b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx28-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/efika-mx-smartbook/lowlevel.c b/arch/arm/boards/efika-mx-smartbook/lowlevel.c
> index 282024e..3e6a0ee 100644
> --- a/arch/arm/boards/efika-mx-smartbook/lowlevel.c
> +++ b/arch/arm/boards/efika-mx-smartbook/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx51_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> index 6afdd17..bda1b22 100644
> --- a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> +++ b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
> @@ -30,12 +30,12 @@
> #include <asm-generic/memory_layout.h>
> #include <asm/system.h>
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r;
> register uint32_t loops = 0x20000;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* restart the MPLL and wait until it's stable */
> writel(readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) | (1 << 27),
> diff --git a/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S b/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
> index c37d271..2967ae8 100644
> --- a/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
> +++ b/arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S
> @@ -71,10 +71,10 @@
>
> .section ".text_bare_init","ax"
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> /* ahb lite ip interface */
> writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0)
> diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> index 0533c1d..88e9b28 100644
> --- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> +++ b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
> @@ -35,13 +35,13 @@
> #define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1))
> #define PPCTL_PARAM_300 (IMX_PLL_PD(0) | IMX_PLL_MFD(3) | IMX_PLL_MFI(6) | IMX_PLL_MFN(1))
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r, s;
> unsigned long ccm_base = MX35_CCM_BASE_ADDR;
> register uint32_t loops = 0x20000;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> r = get_cr();
> r |= CR_Z; /* Flow prediction (Z) */
> diff --git a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c b/arch/arm/boards/eukrea_cpuimx51/lowlevel.c
> index 282024e..3e6a0ee 100644
> --- a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c
> +++ b/arch/arm/boards/eukrea_cpuimx51/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx51_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/freescale-mx23-evk/lowlevel.c b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
> index 0c7e665..1559444 100644
> --- a/arch/arm/boards/freescale-mx23-evk/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx23-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_32M, 0);
> }
> diff --git a/arch/arm/boards/freescale-mx25-3-stack/lowlevel_init.S b/arch/arm/boards/freescale-mx25-3-stack/lowlevel_init.S
> index a55508e..c96bc58 100644
> --- a/arch/arm/boards/freescale-mx25-3-stack/lowlevel_init.S
> +++ b/arch/arm/boards/freescale-mx25-3-stack/lowlevel_init.S
> @@ -49,9 +49,9 @@ MPCTL_PARAM_532_W: .word MPCTL_PARAM_532
> PPCTL_PARAM_W: .word PPCTL_PARAM_300
> CCM_BASE_ADDR_W: .word MX25_CCM_BASE_ADDR
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> #define MX25_CCM_MCR 0x64
>
> diff --git a/arch/arm/boards/freescale-mx28-evk/lowlevel.c b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> index 467194f..f7b9033 100644
> --- a/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx28-evk/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx28-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S b/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
> index 7b0a32b..bd26013 100644
> --- a/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
> +++ b/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
> @@ -56,9 +56,9 @@ MPCTL_PARAM_532_W: .word MPCTL_PARAM_532
> PPCTL_PARAM_W: .word PPCTL_PARAM_300
> CCM_BASE_ADDR_W: .word MX35_CCM_BASE_ADDR
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> mrc 15, 0, r1, c1, c0, 0
>
> diff --git a/arch/arm/boards/freescale-mx51-pdk/lowlevel.c b/arch/arm/boards/freescale-mx51-pdk/lowlevel.c
> index 282024e..3e6a0ee 100644
> --- a/arch/arm/boards/freescale-mx51-pdk/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx51-pdk/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx51_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/freescale-mx53-loco/lowlevel.c b/arch/arm/boards/freescale-mx53-loco/lowlevel.c
> index c6f79ca..60c28f7 100644
> --- a/arch/arm/boards/freescale-mx53-loco/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx53-loco/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx53_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/freescale-mx53-smd/lowlevel.c b/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> index c6f79ca..60c28f7 100644
> --- a/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx53-smd/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx53_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/freescale-mx6-arm2/lowlevel.c b/arch/arm/boards/freescale-mx6-arm2/lowlevel.c
> index 810b890..15d9287 100644
> --- a/arch/arm/boards/freescale-mx6-arm2/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx6-arm2/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0x10000000, SZ_2G, 0);
> }
> diff --git a/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c b/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
> index 8f995ee..aec46fd 100644
> --- a/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
> +++ b/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0x10000000, SZ_1G, 0);
> }
> diff --git a/arch/arm/boards/friendlyarm-mini2440/lowlevel_init.S b/arch/arm/boards/friendlyarm-mini2440/lowlevel_init.S
> index a6e06ed..5633ea3 100644
> --- a/arch/arm/boards/friendlyarm-mini2440/lowlevel_init.S
> +++ b/arch/arm/boards/friendlyarm-mini2440/lowlevel_init.S
> @@ -7,13 +7,13 @@
> #include <mach/s3c-iomap.h>
> #include <asm/barebox-arm-head.h>
>
> - .section ".text_bare_init.reset","ax"
> + .section ".text_bare_init.barebox_arm_reset_vector","ax"
>
> /* ------------------------------------------------------------------------ */
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> bl s3c24x0_disable_wd
>
> diff --git a/arch/arm/boards/friendlyarm-mini6410/lowlevel.c b/arch/arm/boards/friendlyarm-mini6410/lowlevel.c
> index 61ed757..3a8af81 100644
> --- a/arch/arm/boards/friendlyarm-mini6410/lowlevel.c
> +++ b/arch/arm/boards/friendlyarm-mini6410/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm-head.h>
> #include <mach/s3c-iomap.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(S3C_SDRAM_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/friendlyarm-tiny210/lowlevel.c b/arch/arm/boards/friendlyarm-tiny210/lowlevel.c
> index 5d9582e..1da7ba8 100644
> --- a/arch/arm/boards/friendlyarm-tiny210/lowlevel.c
> +++ b/arch/arm/boards/friendlyarm-tiny210/lowlevel.c
> @@ -51,11 +51,11 @@ int __bare_init s5p_irom_load_mmc(void *dest, uint32_t start_block, uint16_t blo
> }
>
>
> -void __bare_init reset(void)
> +void __bare_init barebox_arm_reset_vector(void)
> {
> uint32_t r;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> #ifdef CONFIG_S3C_PLL_INIT
> s5p_init_pll();
> diff --git a/arch/arm/boards/friendlyarm-tiny6410/lowlevel.c b/arch/arm/boards/friendlyarm-tiny6410/lowlevel.c
> index 61ed757..3a8af81 100644
> --- a/arch/arm/boards/friendlyarm-tiny6410/lowlevel.c
> +++ b/arch/arm/boards/friendlyarm-tiny6410/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm-head.h>
> #include <mach/s3c-iomap.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(S3C_SDRAM_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c
> index 9620abd..774dd55 100644
> --- a/arch/arm/boards/guf-cupid/lowlevel.c
> +++ b/arch/arm/boards/guf-cupid/lowlevel.c
> @@ -163,13 +163,13 @@ static void __bare_init noinline setup_sdram(u32 memsize, u32 mode, u32 sdram_ad
> #define UNALIGNED_ACCESS_ENABLE
> #define LOW_INT_LATENCY_ENABLE
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> u32 r0, r1;
> void *iomuxc_base = (void *)MX35_IOMUXC_BASE_ADDR;
> int i;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(0x10000000 + 128 * 1024 - 16);
>
> diff --git a/arch/arm/boards/guf-neso/lowlevel.c b/arch/arm/boards/guf-neso/lowlevel.c
> index ebb8d56..56bafa9 100644
> --- a/arch/arm/boards/guf-neso/lowlevel.c
> +++ b/arch/arm/boards/guf-neso/lowlevel.c
> @@ -32,12 +32,12 @@
>
> #define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r;
> int i;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* ahb lite ip interface */
> writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0);
> diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c
> index 1243b9a..ee7aafd 100644
> --- a/arch/arm/boards/guf-vincell/lowlevel.c
> +++ b/arch/arm/boards/guf-vincell/lowlevel.c
> @@ -123,11 +123,11 @@ void disable_watchdog(void)
>
> void sdram_init(void);
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> u32 r;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* Skip SDRAM initialization if we run from RAM */
> r = get_pc();
> diff --git a/arch/arm/boards/imx21ads/lowlevel_init.S b/arch/arm/boards/imx21ads/lowlevel_init.S
> index 5c6d3f7..4e8c784 100644
> --- a/arch/arm/boards/imx21ads/lowlevel_init.S
> +++ b/arch/arm/boards/imx21ads/lowlevel_init.S
> @@ -21,10 +21,10 @@
>
> .section ".text_bare_init","ax"
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> /*
> * Initialize the AHB-Lite IP Interface (AIPI) module (to enable access to
> diff --git a/arch/arm/boards/imx233-olinuxino/lowlevel.c b/arch/arm/boards/imx233-olinuxino/lowlevel.c
> index df28ad4..c23a12d 100644
> --- a/arch/arm/boards/imx233-olinuxino/lowlevel.c
> +++ b/arch/arm/boards/imx233-olinuxino/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx23-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, 0);
> }
> diff --git a/arch/arm/boards/imx27ads/lowlevel_init.S b/arch/arm/boards/imx27ads/lowlevel_init.S
> index 8939f6a..ce276a9 100644
> --- a/arch/arm/boards/imx27ads/lowlevel_init.S
> +++ b/arch/arm/boards/imx27ads/lowlevel_init.S
> @@ -112,10 +112,10 @@ NORMAL_MODE .long 0x00000000 // system/external device dependent data (SMODE=00
> writel(0x0000000c, 0xD8001010)
> .endm
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> /* ahb lite ip interface */
> writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0)
> diff --git a/arch/arm/boards/karo-tx25/lowlevel.c b/arch/arm/boards/karo-tx25/lowlevel.c
> index 45fa17f..6c7614b 100644
> --- a/arch/arm/boards/karo-tx25/lowlevel.c
> +++ b/arch/arm/boards/karo-tx25/lowlevel.c
> @@ -54,11 +54,11 @@ static inline void __bare_init setup_sdram(uint32_t base, uint32_t esdctl,
> writel(esdctl, esdctlreg);
> }
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.
> * Set all MPROTx to be non-bufferable, trusted for R/W,
> diff --git a/arch/arm/boards/karo-tx28/lowlevel.c b/arch/arm/boards/karo-tx28/lowlevel.c
> index 467194f..f7b9033 100644
> --- a/arch/arm/boards/karo-tx28/lowlevel.c
> +++ b/arch/arm/boards/karo-tx28/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm.h>
> #include <mach/imx28-regs.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/karo-tx51/lowlevel.c b/arch/arm/boards/karo-tx51/lowlevel.c
> index 282024e..3e6a0ee 100644
> --- a/arch/arm/boards/karo-tx51/lowlevel.c
> +++ b/arch/arm/boards/karo-tx51/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx51_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/karo-tx53/lowlevel.c b/arch/arm/boards/karo-tx53/lowlevel.c
> index fe9dac1..32d2c8f 100644
> --- a/arch/arm/boards/karo-tx53/lowlevel.c
> +++ b/arch/arm/boards/karo-tx53/lowlevel.c
> @@ -4,9 +4,9 @@
> #include <mach/imx5.h>
> #include <mach/esdctl.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /*
> * For the TX53 rev 8030 the SDRAM setup is not stable without
> diff --git a/arch/arm/boards/mioa701/lowlevel.c b/arch/arm/boards/mioa701/lowlevel.c
> index 6d48c97..02dc586 100644
> --- a/arch/arm/boards/mioa701/lowlevel.c
> +++ b/arch/arm/boards/mioa701/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0xa0000000, SZ_64M, 0);
> }
> diff --git a/arch/arm/boards/netx/platform.S b/arch/arm/boards/netx/platform.S
> index 95ac13b..1628d35 100644
> --- a/arch/arm/boards/netx/platform.S
> +++ b/arch/arm/boards/netx/platform.S
> @@ -19,9 +19,9 @@
> #include <sizes.h>
> #include <asm/barebox-arm-head.h>
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
> mov r0, #0x80000000
> mov r1, #SZ_64M
> mov r2, #0
> diff --git a/arch/arm/boards/nhk8815/lowlevel.c b/arch/arm/boards/nhk8815/lowlevel.c
> index 3956347..b694c89 100644
> --- a/arch/arm/boards/nhk8815/lowlevel.c
> +++ b/arch/arm/boards/nhk8815/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0x0, SZ_64M, 0);
> }
> diff --git a/arch/arm/boards/omap343xdsp/lowlevel.c b/arch/arm/boards/omap343xdsp/lowlevel.c
> index 403de91..5629655 100644
> --- a/arch/arm/boards/omap343xdsp/lowlevel.c
> +++ b/arch/arm/boards/omap343xdsp/lowlevel.c
> @@ -545,11 +545,11 @@ static int sdp343x_board_init(void)
> return 0;
> }
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> omap3_invalidate_dcache();
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> sdp343x_board_init();
>
> diff --git a/arch/arm/boards/omap3evm/lowlevel.c b/arch/arm/boards/omap3evm/lowlevel.c
> index 49ecb85..74e1315 100644
> --- a/arch/arm/boards/omap3evm/lowlevel.c
> +++ b/arch/arm/boards/omap3evm/lowlevel.c
> @@ -159,9 +159,9 @@ static int omap3_evm_board_init(void)
> return 0;
> }
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> omap3_evm_board_init();
>
> diff --git a/arch/arm/boards/panda/lowlevel.c b/arch/arm/boards/panda/lowlevel.c
> index df0f9c1..ed1dc6f 100644
> --- a/arch/arm/boards/panda/lowlevel.c
> +++ b/arch/arm/boards/panda/lowlevel.c
> @@ -73,9 +73,9 @@ static void noinline panda_init_lowlevel(void)
> omap4_scale_vcores(TPS62361_VSEL0_GPIO);
> }
>
> -void reset(void)
> +void barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> if (get_pc() > 0x80000000)
> goto out;
> diff --git a/arch/arm/boards/pcm027/lowlevel_init.S b/arch/arm/boards/pcm027/lowlevel_init.S
> index b90682c..a2d773c 100644
> --- a/arch/arm/boards/pcm027/lowlevel_init.S
> +++ b/arch/arm/boards/pcm027/lowlevel_init.S
> @@ -52,9 +52,9 @@
> /*
> * Memory setup
> */
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> @ Preserve r8/r7 i.e. kernel entry values
>
> diff --git a/arch/arm/boards/pcm037/lowlevel.c b/arch/arm/boards/pcm037/lowlevel.c
> index 176c968..b81a24f 100644
> --- a/arch/arm/boards/pcm037/lowlevel.c
> +++ b/arch/arm/boards/pcm037/lowlevel.c
> @@ -32,12 +32,12 @@
>
> #define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r;
> volatile int v;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> writel(1 << 6, MX31_IPU_CTRL_BASE_ADDR);
>
> diff --git a/arch/arm/boards/pcm038/lowlevel.c b/arch/arm/boards/pcm038/lowlevel.c
> index c00b3b4..85b9391 100644
> --- a/arch/arm/boards/pcm038/lowlevel.c
> +++ b/arch/arm/boards/pcm038/lowlevel.c
> @@ -33,12 +33,12 @@
>
> #define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r;
> int i;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /* ahb lite ip interface */
> writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0);
> diff --git a/arch/arm/boards/pcm043/lowlevel.c b/arch/arm/boards/pcm043/lowlevel.c
> index d19d5b5..9485a9b 100644
> --- a/arch/arm/boards/pcm043/lowlevel.c
> +++ b/arch/arm/boards/pcm043/lowlevel.c
> @@ -40,14 +40,14 @@
> #define CCM_PDR0_399 0x00011000
> #define CCM_PDR0_532 0x00001000
>
> -void __bare_init __naked reset(void)
> +void __bare_init __naked barebox_arm_reset_vector(void)
> {
> uint32_t r, s;
> unsigned long ccm_base = MX35_CCM_BASE_ADDR;
> unsigned long iomuxc_base = MX35_IOMUXC_BASE_ADDR;
> unsigned long esdctl_base = MX35_ESDCTL_BASE_ADDR;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> r = get_cr();
> r |= CR_Z; /* Flow prediction (Z) */
> diff --git a/arch/arm/boards/pcm049/lowlevel.c b/arch/arm/boards/pcm049/lowlevel.c
> index 8ecf81a..5075bbb 100644
> --- a/arch/arm/boards/pcm049/lowlevel.c
> +++ b/arch/arm/boards/pcm049/lowlevel.c
> @@ -83,9 +83,9 @@ static void noinline pcm049_init_lowlevel(void)
> sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
> }
>
> -void reset(void)
> +void barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> if (get_pc() > 0x80000000)
> goto out;
> diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
> index 683fdce..c2a367d 100644
> --- a/arch/arm/boards/pcm051/lowlevel.c
> +++ b/arch/arm/boards/pcm051/lowlevel.c
> @@ -3,9 +3,9 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> barebox_arm_entry(0x80000000, SZ_512M, 0);
> }
> diff --git a/arch/arm/boards/phycard-a-l1/lowlevel.c b/arch/arm/boards/phycard-a-l1/lowlevel.c
> index 6043d8a..d00efcc 100644
> --- a/arch/arm/boards/phycard-a-l1/lowlevel.c
> +++ b/arch/arm/boards/phycard-a-l1/lowlevel.c
> @@ -249,9 +249,9 @@ static int pcaal1_board_init(void)
> return 0;
> }
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> pcaal1_board_init();
>
> diff --git a/arch/arm/boards/phycard-a-xl2/lowlevel.c b/arch/arm/boards/phycard-a-xl2/lowlevel.c
> index f8f4db5..07505ff 100644
> --- a/arch/arm/boards/phycard-a-xl2/lowlevel.c
> +++ b/arch/arm/boards/phycard-a-xl2/lowlevel.c
> @@ -83,9 +83,9 @@ static noinline void pcaaxl2_init_lowlevel(void)
> sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
> }
>
> -void reset(void)
> +void barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> if (get_pc() > 0x80000000)
> goto out;
> diff --git a/arch/arm/boards/phycard-i.MX27/lowlevel_init.S b/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
> index d81066e..69513aa 100644
> --- a/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
> +++ b/arch/arm/boards/phycard-i.MX27/lowlevel_init.S
> @@ -66,9 +66,9 @@
>
> .section ".text_bare_init","ax"
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> /* ahb lite ip interface */
> writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0)
> diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
> index 7a09eed..4c94cc9 100644
> --- a/arch/arm/boards/raspberry-pi/lowlevel.c
> +++ b/arch/arm/boards/raspberry-pi/lowlevel.c
> @@ -4,8 +4,8 @@
> #include <asm/barebox-arm-head.h>
> #include <mach/platform.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_128M, 0);
> }
> diff --git a/arch/arm/boards/scb9328/lowlevel_init.S b/arch/arm/boards/scb9328/lowlevel_init.S
> index f8197bd..d7afa21 100644
> --- a/arch/arm/boards/scb9328/lowlevel_init.S
> +++ b/arch/arm/boards/scb9328/lowlevel_init.S
> @@ -76,10 +76,10 @@
> ldr r1, =val; \
> str r1, [r0];
>
> -.globl reset
> -reset:
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
>
> - common_reset r0
> + arm_cpu_lowlevel_init r0
>
> /* Change PERCLK1DIV to 14 ie 14+1 */
> writel(CFG_PCDR_VAL, MX1_CCM_BASE_ADDR + MX1_PCDR)
> diff --git a/arch/arm/boards/toshiba-ac100/lowlevel.c b/arch/arm/boards/toshiba-ac100/lowlevel.c
> index 68706a5..2f99d70 100644
> --- a/arch/arm/boards/toshiba-ac100/lowlevel.c
> +++ b/arch/arm/boards/toshiba-ac100/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0x0, SZ_512M, 0);
> }
> diff --git a/arch/arm/boards/tqma53/lowlevel.c b/arch/arm/boards/tqma53/lowlevel.c
> index c6f79ca..60c28f7 100644
> --- a/arch/arm/boards/tqma53/lowlevel.c
> +++ b/arch/arm/boards/tqma53/lowlevel.c
> @@ -2,8 +2,8 @@
> #include <mach/esdctl.h>
> #include <asm/barebox-arm-head.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> imx53_barebox_entry(0);
> }
> diff --git a/arch/arm/boards/versatile/lowlevel.c b/arch/arm/boards/versatile/lowlevel.c
> index 3956347..b694c89 100644
> --- a/arch/arm/boards/versatile/lowlevel.c
> +++ b/arch/arm/boards/versatile/lowlevel.c
> @@ -3,8 +3,8 @@
> #include <asm/barebox-arm-head.h>
> #include <asm/barebox-arm.h>
>
> -void __naked reset(void)
> +void __naked barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
> barebox_arm_entry(0x0, SZ_64M, 0);
> }
> diff --git a/arch/arm/cpu/exceptions.S b/arch/arm/cpu/exceptions.S
> index 115c4e5..4185bd1 100644
> --- a/arch/arm/cpu/exceptions.S
> +++ b/arch/arm/cpu/exceptions.S
> @@ -138,7 +138,7 @@ fiq:
> bl do_fiq
>
> .section .text_exceptions
> -1: b 1b /* reset */
> +1: b 1b /* barebox_arm_reset_vector */
> #ifdef CONFIG_ARM_EXCEPTIONS
> ldr pc, =undefined_instruction /* undefined instruction */
> ldr pc, =software_interrupt /* software interrupt (SWI) */
> diff --git a/arch/arm/include/asm/barebox-arm-head.h b/arch/arm/include/asm/barebox-arm-head.h
> index bf00ff0..9d9b854 100644
> --- a/arch/arm/include/asm/barebox-arm-head.h
> +++ b/arch/arm/include/asm/barebox-arm-head.h
> @@ -5,7 +5,7 @@
>
> #ifndef __ASSEMBLY__
>
> -static inline void common_reset(void)
> +static inline void arm_cpu_lowlevel_init(void)
> {
> uint32_t r;
>
> @@ -45,12 +45,12 @@ static inline void barebox_arm_head(void)
> "bx r9\n"
> ".thumb\n"
> "1:\n"
> - "bl reset\n"
> + "bl barebox_arm_reset_vector\n"
> ".rept 10\n"
> "1: b 1b\n"
> ".endr\n"
> #else
> - "b reset\n"
> + "b barebox_arm_reset_vector\n"
> "1: b 1b\n"
> "1: b 1b\n"
> "1: b 1b\n"
> @@ -70,7 +70,7 @@ static inline void barebox_arm_head(void)
>
> #else
>
> -.macro common_reset, scratch
> +.macro arm_cpu_lowlevel_init, scratch
>
> /* set the cpu to SVC32 mode */
> mrs \scratch, cpsr
> diff --git a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> index 221c05d..a99cfec 100644
> --- a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> @@ -23,12 +23,12 @@ void static inline access_sdram(void)
> writel(0x00000000, AT91_SDRAM_BASE);
> }
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> u32 r;
> int i;
>
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> /*
> * PMC Check if the PLL is already initialized
> diff --git a/arch/arm/mach-at91/at91sam9260_lowlevel_init.c b/arch/arm/mach-at91/at91sam9260_lowlevel_init.c
> index 875c767..02e0566 100644
> --- a/arch/arm/mach-at91/at91sam9260_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9260_lowlevel_init.c
> @@ -23,9 +23,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/at91sam9261_lowlevel_init.c b/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
> index beaddc8..e740943 100644
> --- a/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
> @@ -23,9 +23,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/at91sam9263_lowlevel_init.c b/arch/arm/mach-at91/at91sam9263_lowlevel_init.c
> index 5102051..ae08c90 100644
> --- a/arch/arm/mach-at91/at91sam9263_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9263_lowlevel_init.c
> @@ -23,9 +23,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/at91sam9g45_lowlevel_init.c b/arch/arm/mach-at91/at91sam9g45_lowlevel_init.c
> index 689312f..df65b86 100644
> --- a/arch/arm/mach-at91/at91sam9g45_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9g45_lowlevel_init.c
> @@ -16,9 +16,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/at91sam9n12_lowlevel_init.c b/arch/arm/mach-at91/at91sam9n12_lowlevel_init.c
> index 6acbd06..eca12c5 100644
> --- a/arch/arm/mach-at91/at91sam9n12_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9n12_lowlevel_init.c
> @@ -16,9 +16,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9N12_SRAM_BASE + AT91SAM9N12_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c b/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c
> index e1befcb..67dbd00 100644
> --- a/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c
> @@ -16,9 +16,9 @@
> #include <init.h>
> #include <sizes.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(AT91SAM9X5_SRAM_BASE + AT91SAM9X5_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-at91/include/mach/barebox-arm-head.h b/arch/arm/mach-at91/include/mach/barebox-arm-head.h
> index 7d6a009..d4bb96f 100644
> --- a/arch/arm/mach-at91/include/mach/barebox-arm-head.h
> +++ b/arch/arm/mach-at91/include/mach/barebox-arm-head.h
> @@ -13,7 +13,7 @@ static inline void barebox_arm_head(void)
> #ifdef CONFIG_THUMB2_BAREBOX
> #error Thumb2 is not supported
> #else
> - "b reset\n"
> + "b barebox_arm_reset_vector\n"
> "1: b 1b\n"
> "1: b 1b\n"
> "1: b 1b\n"
> diff --git a/arch/arm/mach-at91/sama5d3_lowlevel_init.c b/arch/arm/mach-at91/sama5d3_lowlevel_init.c
> index 1d30da6..9bb25e3 100644
> --- a/arch/arm/mach-at91/sama5d3_lowlevel_init.c
> +++ b/arch/arm/mach-at91/sama5d3_lowlevel_init.c
> @@ -15,9 +15,9 @@
> #include <mach/hardware.h>
> #include <mach/at91sam9_ddrsdr.h>
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init barebox_arm_reset_vector(void)
> {
> - common_reset();
> + arm_cpu_lowlevel_init();
>
> arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
>
> diff --git a/arch/arm/mach-ep93xx/lowlevel_init.S b/arch/arm/mach-ep93xx/lowlevel_init.S
> index 154d38d..5729eab 100644
> --- a/arch/arm/mach-ep93xx/lowlevel_init.S
> +++ b/arch/arm/mach-ep93xx/lowlevel_init.S
> @@ -24,9 +24,9 @@
> #include <mach/ep93xx-regs.h>
> #include <asm/barebox-arm-head.h>
>
> -.globl reset
> -reset:
> - common_reset r0
> +.globl barebox_arm_reset_vector
> +barebox_arm_reset_vector:
> + arm_cpu_lowlevel_init r0
>
> /* Turn on both LEDs */
> bl red_LED_on
> diff --git a/arch/arm/mach-imx/include/mach/imx-flash-header.h b/arch/arm/mach-imx/include/mach/imx-flash-header.h
> index 9a351ad..a1f4a48 100644
> --- a/arch/arm/mach-imx/include/mach/imx-flash-header.h
> +++ b/arch/arm/mach-imx/include/mach/imx-flash-header.h
> @@ -162,9 +162,9 @@ static inline void barebox_arm_imx_fcb_head(void)
> " bx r9\n"
> ".thumb\n"
> "1:\n"
> - "bl reset\n"
> + "bl barebox_arm_reset_vector\n"
> #else
> - "1: b reset\n"
> + "1: b barebox_arm_reset_vector\n"
> ".word 0x0\n"
> ".word 0x0\n"
> #endif
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-02-06 19:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-05 13:45 Jean-Christophe PLAGNIOL-VILLARD
2013-02-06 19:44 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130206194459.GN1906@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox