* RFC, i.MX28 related
@ 2013-02-08 8:54 Juergen Beisert
0 siblings, 0 replies; only message in thread
From: Juergen Beisert @ 2013-02-08 8:54 UTC (permalink / raw)
To: barebox
Hi list,
the i.MX28 SoC has a nice "feature" which prevents the "intended" usage of its
watchdog.
When the SoC is powered via its 5 V power supply input the watchdog triggers a
simple system reset when it barks. But when the SoC is powered via the
battery supply input only, the watchdog powers off the whole chip instead,
because it resets the PMIC.
But we are in luck: a register bit exists to select a system reset or power
off for the battery powered case when the watchdog barks. It only defaults to
the power off setting after reset.
Should we re-program this bit to the system reset setting for all i.MX28 based
system (e.g. in the i.MX28 generic part of Barebox) or better on a board by
board base?
jbe
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-02-08 8:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-08 8:54 RFC, i.MX28 related Juergen Beisert
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox