Trouble booting kernel since 2012.12.1

Trouble booting kernel since 2012.12.1

[George Pontis]

Having some trouble booting Linux from recent versions of barebox, and need
some pointers about where to look.

I'm working with custom hardware based on the i.MX53. It is roughly
comparable to the i.MX53 LOCO board, and I started with that board support
as a base for my own port. Up through barebox 2012.12.1 things were working
well. However, with the 2013.01 and 2013.02 releases I can't get the kernel
to boot successfully. It always hangs after displaying the arch number, but
before posting the message "Booting Linux on physical CPU 0". All the lines
displayed up to that point are identical. I have tried booting a kernel via
TFTP and root FS via NFS. Also with the rootfs loaded as an initrd. The same
barebox environment, kernel, and rootfs works in both modes when I'm running
2012.12.1 or 2012.11.

I see that a new environment has been introduced during this time, but did
not do anything to move over to it. Could this be the source of my problem,
or need I look elsewhere ?

George



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: Trouble booting kernel since 2012.12.1

[Sascha Hauer]

On Sun, Feb 10, 2013 at 03:38:41PM -0800, George Pontis wrote:
> Having some trouble booting Linux from recent versions of barebox, and need
> some pointers about where to look.
> 
> I'm working with custom hardware based on the i.MX53. It is roughly
> comparable to the i.MX53 LOCO board, and I started with that board support
> as a base for my own port. Up through barebox 2012.12.1 things were working
> well. However, with the 2013.01 and 2013.02 releases I can't get the kernel
> to boot successfully. It always hangs after displaying the arch number, but
> before posting the message "Booting Linux on physical CPU 0". All the lines
> displayed up to that point are identical. I have tried booting a kernel via
> TFTP and root FS via NFS. Also with the rootfs loaded as an initrd. The same
> barebox environment, kernel, and rootfs works in both modes when I'm running
> 2012.12.1 or 2012.11.
> 
> I see that a new environment has been introduced during this time, but did
> not do anything to move over to it. Could this be the source of my problem,
> or need I look elsewhere ?

Try booting with bootm -v -v

Also you could enable earlyprintk support in the kernel and pass the
'earlyprintk' parameter on the kernel command line.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox