mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 0/5] Zynq support for barebox
@ 2013-03-03  1:20 Josh Cartwright
  2013-03-03  0:48 ` [PATCH 1/5] trivial: doc: fix typos in mach-arm.dox Josh Cartwright
                   ` (5 more replies)
  0 siblings, 6 replies; 26+ messages in thread
From: Josh Cartwright @ 2013-03-03  1:20 UTC (permalink / raw)
  To: barebox; +Cc: Michal Simek

In San Francisco a couple weeks ago (ELC2013), Thomas Petazzoni
informally mentioned barebox in passing, so I decided to toy with it a
bit...

This patchset adds basic support for the Zynq SoC to barebox.  So far,
it's only been tested as a 'secondary' bootloader (after u-boot).  Also
added is support for the zc702 development board.

The first two patches are simple typos I found getting acclimated to the
barebox source.

Josh Cartwright (5):
  trivial: doc: fix typos in mach-arm.dox
  defaultenv: fixed mismatched braces in bin/boot
  ARM: zynq: add driver for Zynq uarts
  ARM: zynq: add support for Zynq 7000 SoC
  ARM: zynq: add support for zc702 development board

 arch/arm/Kconfig                           |   9 +
 arch/arm/Makefile                          |   2 +
 arch/arm/boards/zynq-zc702/Makefile        |   1 +
 arch/arm/boards/zynq-zc702/config.h        |   0
 arch/arm/boards/zynq-zc702/devices.c       |  70 ++++++
 arch/arm/boards/zynq-zc702/lowlevel.c      |  28 +++
 arch/arm/mach-arm.dox                      |   4 +-
 arch/arm/mach-zynq/Kconfig                 |  22 ++
 arch/arm/mach-zynq/Makefile                |   1 +
 arch/arm/mach-zynq/clocks.c                | 341 +++++++++++++++++++++++++++++
 arch/arm/mach-zynq/include/mach/clkdev.h   |   7 +
 arch/arm/mach-zynq/include/mach/debug_ll.h |  21 ++
 arch/arm/mach-zynq/include/mach/slcr.h     |  26 +++
 arch/arm/mach-zynq/reset.c                 |  28 +++
 defaultenv/bin/boot                        |   2 +-
 drivers/serial/Kconfig                     |   6 +
 drivers/serial/Makefile                    |   1 +
 drivers/serial/serial_zynq.c               | 144 ++++++++++++
 18 files changed, 710 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boards/zynq-zc702/Makefile
 create mode 100644 arch/arm/boards/zynq-zc702/config.h
 create mode 100644 arch/arm/boards/zynq-zc702/devices.c
 create mode 100644 arch/arm/boards/zynq-zc702/lowlevel.c
 create mode 100644 arch/arm/mach-zynq/Kconfig
 create mode 100644 arch/arm/mach-zynq/Makefile
 create mode 100644 arch/arm/mach-zynq/clocks.c
 create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
 create mode 100644 arch/arm/mach-zynq/include/mach/slcr.h
 create mode 100644 arch/arm/mach-zynq/reset.c
 create mode 100644 drivers/serial/serial_zynq.c

-- 
1.8.1.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2013-03-08 19:31 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-03  1:20 [PATCH 0/5] Zynq support for barebox Josh Cartwright
2013-03-03  0:48 ` [PATCH 1/5] trivial: doc: fix typos in mach-arm.dox Josh Cartwright
2013-03-03  0:48 ` [PATCH 2/5] defaultenv: fixed mismatched braces in bin/boot Josh Cartwright
2013-03-03  0:48 ` [PATCH 3/5] ARM: zynq: add driver for Zynq uarts Josh Cartwright
2013-03-03  7:16   ` Antony Pavlov
2013-03-03 14:55     ` Josh Cartwright
2013-03-03 10:37   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-03 10:37   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-03  0:48 ` [PATCH 4/5] ARM: zynq: add support for Zynq 7000 SoC Josh Cartwright
2013-03-03  7:24   ` Antony Pavlov
2013-03-05 17:22     ` Josh Cartwright
2013-03-05 19:08       ` Sascha Hauer
2013-03-03  0:48 ` [PATCH 5/5] ARM: zynq: add support for zc702 development board Josh Cartwright
2013-03-03 10:39   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-05 17:16     ` Josh Cartwright
2013-03-05 18:02       ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-03 14:58 ` [PATCH 0/5] Zynq support for barebox Steffen Trumtrar
2013-03-05 17:09   ` Josh Cartwright
2013-03-06 17:28     ` Steffen Trumtrar
2013-03-07 22:46       ` Josh Cartwright
2013-03-08  6:39         ` Steffen Trumtrar
2013-03-08 12:20           ` Michal Simek
2013-03-08 19:31             ` Steffen Trumtrar
2013-03-08 16:10           ` Josh Cartwright
2013-03-08 16:11             ` Steffen Trumtrar
2013-03-08 16:10           ` Jean-Christophe PLAGNIOL-VILLARD

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox