From: Sascha Hauer <s.hauer@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 2/5] tegra: switch to ARMv7 cpu type
Date: Fri, 8 Mar 2013 15:32:03 +0100 [thread overview]
Message-ID: <20130308143203.GF1906@pengutronix.de> (raw)
In-Reply-To: <CAA4bVAEbWYWVstete_AYB_3oKRu5Rv6eAc_+91j8xwNtGNfkrQ@mail.gmail.com>
Hi Antony,
On Fri, Mar 08, 2013 at 10:03:19AM +0400, Antony Pavlov wrote:
> Hi!
>
> This commit breaks usb ethernet card on my board.
>
> toshiba ac100> / usb
> USB: scanning bus for devices...
> Bus 001 Device 003: ID 0bdb:190a F3307
> Bus 001 Device 004: ID 0bda:58f2 USB Camera
> Bus 001 Device 005: ID 2001:3c05 DUB-E100
> mdio_bus: miibus0: probed
> eth0: got preset MAC address: 1C:7E:E5:0F:E1:14
> Bus 001 Device 002: ID 0424:2513
> Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
> 5 USB Device(s) found
> toshiba ac100> / dhcp
> 100Mbps full duplex link detected
> dhcp failed: error 1
> dhcp: error 1
> toshiba ac100>
Could you try the following?
Sascha
diff --git a/arch/arm/include/asm/barebox-arm-head.h b/arch/arm/include/asm/barebox-arm-head.h
index 9d9b854..c631815 100644
--- a/arch/arm/include/asm/barebox-arm-head.h
+++ b/arch/arm/include/asm/barebox-arm-head.h
@@ -22,7 +22,7 @@ static inline void arm_cpu_lowlevel_init(void)
#if __LINUX_ARM_ARCH__ >= 6
r |= CR_U;
- r &= CR_A;
+ r &= ~CR_A;
#else
r |= CR_A;
#endif
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-03-08 14:32 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 9:22 [PATCH 0/7] Rework current Tegra support Lucas Stach
2013-03-01 9:22 ` [PATCH 1/7] tegra: move address map to tegra20-silicon.h Lucas Stach
2013-03-01 13:17 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-02 23:25 ` Lucas Stach
2013-03-04 19:26 ` Antony Pavlov
2013-03-01 9:22 ` [PATCH 2/7] tegra: remove debug_ll Lucas Stach
2013-03-01 13:17 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:19 ` Sascha Hauer
2013-03-01 9:22 ` [PATCH 3/7] tegra: switch to ARMv7 cpu type Lucas Stach
2013-03-01 9:22 ` [PATCH 4/7] tegra: add blank tegra20 platform init Lucas Stach
2013-03-01 13:16 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 9:22 ` [PATCH 5/7] tegra: add driver for the clock and reset module Lucas Stach
2013-03-01 17:26 ` Sascha Hauer
2013-03-02 23:16 ` Lucas Stach
2013-03-01 9:22 ` [PATCH 6/7] tegra: add proper timer driver Lucas Stach
2013-03-01 13:14 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:23 ` Sascha Hauer
2013-03-02 23:13 ` Lucas Stach
2013-03-03 7:07 ` Antony Pavlov
2013-03-04 17:09 ` Lucas Stach
2013-03-04 19:14 ` Antony Pavlov
2013-03-01 9:22 ` [PATCH 7/7] tegra: add power management controller driver Lucas Stach
2013-03-01 13:15 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:28 ` Sascha Hauer
2013-03-01 18:00 ` Antony Pavlov
2013-03-02 23:21 ` Lucas Stach
2013-03-07 10:33 ` [PATCH v2 0/5] Rework current Tegra support Lucas Stach
2013-03-07 10:33 ` [PATCH v2 1/5] tegra: pull in iomap.h from the Linux kernel Lucas Stach
2013-03-07 10:33 ` [PATCH v2 2/5] tegra: switch to ARMv7 cpu type Lucas Stach
2013-03-08 6:03 ` Antony Pavlov
2013-03-08 13:17 ` Lucas Stach
2013-03-08 16:56 ` Antony Pavlov
2013-03-08 14:32 ` Sascha Hauer [this message]
2013-03-08 17:15 ` Antony Pavlov
2013-03-07 10:33 ` [PATCH v2 3/5] tegra: add driver for the clock and reset module Lucas Stach
2013-03-10 7:41 ` Antony Pavlov
2013-03-10 9:53 ` Sascha Hauer
2013-03-07 10:33 ` [PATCH v2 4/5] tegra: add proper timer driver Lucas Stach
2013-03-10 7:12 ` Antony Pavlov
2013-03-07 10:33 ` [PATCH v2 5/5] tegra: add power management controller driver Lucas Stach
2013-03-10 8:19 ` Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130308143203.GF1906@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox