mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: barebox@lists.infradead.org, Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: Re: [PATCH 1/2] net: macb: remove gem_recv and reorder probe
Date: Wed, 13 Mar 2013 10:03:36 +0100	[thread overview]
Message-ID: <20130313090336.GD1568@game.jcrosoft.org> (raw)
In-Reply-To: <1363164494-3614-1-git-send-email-s.trumtrar@pengutronix.de>

On 09:48 Wed 13 Mar     , Steffen Trumtrar wrote:
> The function gem_recv implements a buffer "ring" that stops at filling level 10.
> That means, when the driver is used as gem, it stops receiving after exactly
> 10 packets. Instead of implementing macb_recv twice, use it also for the gem
> part. If there needs to be an extra recv function for the gigabit case, it can
> be added than.
> Also, first set the type of device (macb or gem) and then use functions that
> use this info.
> 
> Tested on a Zynq7000.
NACK

on gem we can receive the packet in one buffer the gem_recv implement this
the macb can only receive splited buffer and then you have to reconstruct the
packet

Best Regards,
J.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  drivers/net/macb.c | 47 +++++++----------------------------------------
>  1 file changed, 7 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 8602437..a12eea7 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -169,37 +169,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
>  	macb->rx_tail = new_tail;
>  }
>  
> -static int gem_recv(struct eth_device *edev)
> -{
> -	struct macb_device *macb = edev->priv;
> -	unsigned int rx_tail = macb->rx_tail;
> -	void *buffer;
> -	int length;
> -	u32 status;
> -
> -	dev_dbg(macb->dev, "%s\n", __func__);
> -
> -	for (;;) {
> -		barrier();
> -		if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
> -			return -1;
> -
> -		barrier();
> -		status = macb->rx_ring[rx_tail].ctrl;
> -		length = MACB_BFEXT(RX_FRMLEN, status);
> -		if (status & MACB_BIT(RX_SOF)) {
> -			buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
> -			net_receive(buffer, length);
> -			macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
> -			barrier();
> -		}
> -		rx_tail++;
> -		macb->rx_tail++;
> -	}
> -
> -	return 0;
> -}
> -
>  static int macb_recv(struct eth_device *edev)
>  {
>  	struct macb_device *macb = edev->priv;
> @@ -619,11 +588,6 @@ static int macb_probe(struct device_d *dev)
>  
>  	macb->phy_flags = pdata->phy_flags;
>  
> -	macb_init_rx_buffer_size(macb, PKTSIZE);
> -	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> -	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> -	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> -
>  	macb->regs = dev_request_mem_region(dev, 0);
>  
>  	/*
> @@ -638,12 +602,15 @@ static int macb_probe(struct device_d *dev)
>  
>  	clk_enable(macb->pclk);
>  
> -	if (macb_is_gem(macb))
> -		edev->recv = gem_recv;
> -	else
> -		edev->recv = macb_recv;
>  	macb->is_gem = read_is_gem(macb);
>  
> +	macb_init_rx_buffer_size(macb, PKTSIZE);
> +	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> +	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> +	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> +
> +	edev->recv = macb_recv;
> +
>  	macb_reset_hw(macb);
>  	ncfgr = macb_mdc_clk_div(macb);
>  	ncfgr |= MACB_BIT(PAE);		/* PAuse Enable */
> -- 
> 1.8.2.rc2
> 

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2013-03-13  9:08 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-13  8:48 Steffen Trumtrar
2013-03-13  8:48 ` [PATCH 2/2] net: macb: turn off endian_swp_pkt_en Steffen Trumtrar
2013-03-13  9:04   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13  9:17     ` Steffen Trumtrar
2013-03-13  9:03 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-03-13  9:19   ` [PATCH 1/2] net: macb: remove gem_recv and reorder probe Steffen Trumtrar
2013-03-13  9:32     ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13  9:33       ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 10:15   ` Sascha Hauer
2013-03-13 12:17     ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 13:08       ` Steffen Trumtrar
2013-03-13 15:36         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130313090336.GD1568@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=nicolas.ferre@atmel.com \
    --cc=s.trumtrar@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox